Latest air seal Tenders | Government air seal Tenders

CTN :45086047

20 May, 2026 NA

Jabalpur - Madhya Pradesh

Tender For supply of strap retaining steel clip to ds cat. no. 5340-009483 (ref. drg 6080633) . , seal strapping steel of lock for bindex tape to cat. no. m2/5340-009495 to desgn. n16-11-10 articl no , hose nipple to drg. no. bof-6125368 , cap to drg. no. bof-6101513

Central Government/Public Sector

CTN :45077736

19 May, 2026 NA

Mumbai - Maharashtra

Tender For denoting no. g 331 b,payment for station earning in size 17 inch x 12 inch (books), with 150 lvs.(50 sets) having both side print 58 gsm ir logo pink, yellow and white water mark security paper in black ink. printing instructions: printing with raw material text matter with both side printing on first foil on pink water mark paper, second foil on yellow water mark paper and third foil on white water mark paper in bilingual (hindi and english) text matter printing in black colour ink. numbering to be machine serial numbered on right top corner (in triplicate) in 6 digits and as per serial number allotted. in no case the number shall be printed on dot matrix/inkjet or laser jet printers. raw material:- for text printing over 58 gsm ir logo pink, yellow and white water mark security paper conforming to is 1848/2007 as amended up to 2018 for cover page kraft paper 130 gsm conforming to is 1397/90 or latest grade- ii binding specifications: 150 leaves (50 sets 1586518/2023/o/o dycmm/g/pcmm/hq/cr 13 in triplicate) with first foil pink water mark paper, second foil yellow water mark paper and third foil white water mark paper, limp bound with two side pins on left side of cover page. one seal pin on right bottom corner numbering instructions: the commencing no. is to be obtained from amm (sty) by. supply should be in a bundle of 10 nos. each with strapping. manuscripts to be get approved from amm (sty)/ by. [ warranty period: 30 months after the date of delivery ]

State Government

CTN :44746046

12 May, 2026 NA

Multi City - Telangana

Tender For corrigendum : procurement of maintenance/air seal for the bulb turbine at pjhes, revulapally

CTN :45067232

13 May, 2026 76.5 Thousand

Nashik - Maharashtra

Tender For supply of mt spares e e - pressure plate assy , gaskit , gaskit oil cooler cover , hp hose presure , hp hose return , wheel cyl assy , disc driven clutch , cabin lifting pump assy hand pump dhp , pressure gauge , steering air seal oil seal input shaft , oil seal , assy combination switch , sleeve cylinder assembly , gear fly wheel ring , pressure plate assembly , clutch cyl assy , sleeve cy assy , grab outer handle door inner , pressure plate assy clutch cover assy

Central Government/Public Sector

CTN :45025986

29 May, 2026 NA

Mumbai - Maharashtra

Tender For corrigendum : - denoting no.- g 506 b, free travellingauthority book2. item detailss.no.pl code(group)itemtypegst(y/n)stock /nonstockorderingconsiderfor evalapprovingagencyinspectionagencycurrencyallowedestimatedrate1 83055010goods (y)stock --- yesconsigneeinr description :(mvb item) (n) description :- denoting no.- g 506 b, free travelling authority book, in size: 8.5 inch x 8 inch, (books) with 100 lvs. having one side print on 58 gsm ir logo white water mark security paper in black ink. printing instructions: : printing with raw material. text matter with one side printing in bilingual (hindi and english) text matter printing in black colour ink numbering to bemachine serial numbered on right top corner (in duplicate on same page i.e. on 02 counter foils) in 6 digits and as per serial number allotted. in no case the number shall be printed on dot matrix/inkjet or laser jet printers. raw material:- for text printing over 58 gsm ir logo white water mark security paper conforming to is 1848/2007 as amended up to 2018 for cover page kraft paper 130 gsm conforming tois 1397/90 or latest grade- ii binding specifications: 100 leaves (in duplicate on same page) limp bound with two side pins on left side of cover page. one seal pin on right bottom corner supply should be in a bundle of 20 nos. each with strapping. numbering instructions: the commencing no. is to be obtained from amm (sty) by. manuscripts to be get approved from amm (sty)/ by. [ warranty period: 30 months after the date of delivery ]

CTN :44624116

12 May, 2026 NA

Bhilai - Chhattisgarh

Tender For corrigendum : biennial rate contract with bhel for supply of spares - field controller:areca-iii , m/s bhel, hnk:valve spindle(rhs), assembly of gland ring exhaust pedestal, assembly of gland ring cover gen end, set of glands 30 mw tg, thermocouple drb-200 l=6000 part no. : ., thermocouple type-dra-300 hpt bearing pa, thermocouple for esv, rtd d-1;l=140mm,d=6mm,1/2"m, turb stm temp ,t/c, tc:b,l=375,d6mm,dup, thermocouple type b l=515, hpt brg mtl temp,t/c, turb/seal temp,t/c, hwm-846, t/c type-b;l=465mm;esv+hpcv, xrp883:journal shaft assy, complete flame scanner head assembly. pa, fibre optic cable for flame scanner part, lens barrel assembly for scanner part no, housing elet mod, connectors:connector prefab. cables 5mts, flame scanner lens part no. : - drg no., collimator assembly for flame scanner pa, compression spring for flame scanner, bhel-3:c3000spl-glvsw-mo-f2250mm:complet, bhel part iii:c3000-sv-sw-hw-f22 2":comp, bhel part iii:c3000-sv-sw-hw-f22,1":comp, bhel part iii:glv-c-1500-sw-hw a-1051":c, 2-c1500-sv-sw-hw-f22:comp. valve assy(hw, bhel part iii:c800-svsw-hw-a105sst1/2":c, bhel part iii:c2500-sv-sw-hw-f22,size 1", 25nb-c-800-hw:complete assy., bhel-4:2-c2500-glv-hw-sw-f22:complete as, bhel part iii:c1500-sv-sw-hw-f221-1/2":c, bhel part iii:c800-sv-sw-hw-a105-sst 2":, bhel part iii:glv-a-105-c1500-sw-1-1/2":, bhel part iv:c1500-sv-sw-hw-a105-1/2":co, bhel part iii:c1500-sv-sw-hw-f22 1":com, xrp883:multiport outlet and liners, xrp883:seal wear ring, xrp883:bull ring clamping ring(4 seg./se, xrp883:spring stud brg(wear sleeve), xrp883:bowl hub cover for bowl mill xrp-, xrp883:trunnion shaft end cap-thrust end, xrp883:trunnion shaft end cap-free end, xrp883:trunnion bushing retainer, xrp883:thrust plate-thrust end journal h, xrp883:thrust plate-free end, xrp883:trunnion shaft, xrp883:spring air seal cap, xrp883:spring stud brg.housing, xrp883:spring guide var-02, xrp883:spring housing cover var-02, xrp883:spring stud adapter, xrp883:spring preload stud var-02, xrp883:spring orifice plate, xrp883:journal pr.spring, xrp883:deflector blade, ref no: hy-308.0, xrp883:spring stud lock nut, xrp883:inverted cone spare, xrp883:stop bolt assembly, xrp883:upper journal housing, xrp883:lower journal housing, 50 pin scsi cable set,g/f, prefab i/o cable set,g/f, surge spprsr cn9067557145, wire wound resistor,cn9060372115, maxpac 37cond.ribb on cable assy. 84, res zero ohm 0.25w,dv0692305963, res mf 10m 1% 0.6w 50ppm,en7460190586, terminal block cbt250 ,cu7433498508, fuse base & carrier, tag boardassyly.with 5poles,d99260005501, electrnc componet:blank modules(48*24)mm, diode stud type 1400v; 95a, maxpac cable assy. 28" part no. : -d5945, ars100:valve stem, 250mw:screw cap soc pm10x20, 250mw:locking plate, 250mw:seal strip, 250mw:seal strip, 250mw:seal strip, 250mw:seal strip, 250mw:rectangular wire 1.7x1.4, esv:piston, jacking oil system:jacking hose brg 5&6, jacking oil system:jacking oil hose brg-, xrp883:worm gear & worm shaft assy, 250mw:caf gasket, 250mw:gasket dia 1240/1172, s3, 250mw:o ring, 250mw:o ring, 250mw:gasket, esv:stud m30x150, esv:cap nut am 30, 250mw:governor impeller, 250mw:threaded bushing, over speed trip system:wheel, 250mw:clamping piece for 3l &3r, thri 108/44:sealing strip 8x2, l=750mm, 250mw:locking plate for 2l & 2r, 250mw:locking plate, insulator:bushing insulator, insulator:pin insulator, insulator:shaft insulator for esp, hnk:sealing ring (lip seal), cv & servomotor:plug with stem, gen(bhel-thri 86/35):sealing ring assy., xrp883:gearbox asy, wb-1e:complete assembly, bhel davr:pwr mdl 6qg12 3-ph 68912sss006, oil gun assy, bhel davr:pulse coupling stage mdlassy u, bhel davr:trfmr pwr 5kva 3ph ynyn0 220/4, bhel davr:res w.w 500w 5% 150r 50ppm, bhel davr:res ww 2k 5%25w pir25, bhel davr:mdl voltage level converter mo, bhel davr:distribution block 5way, colou, bhel davr:mdl 69203na1aa un0610av1, i/o, bhel davr:srg spr 150v-250v dc 3rt2916-1, bhel davr:shunt 50a/60mv; accy:0.5%, bhe

State Government

CTN :45001554

13 May, 2026 1.73 Lacs

Korba - Chhattisgarh

Tender For supply of expeller / cooling disc for pa fan hot air sealing for u#03 210 mw abl boiler, htps, korba west.

Central Government/Public Sector

CTN :45010190

07 May, 2026 NA

Varanasi - Uttar Pradesh

Tender For supply of seal runner assly (hy-101.06) - fully m/cd item as per drg. 26116200693/04 with matl as per specn. a , air seal wear sleeve (hy-101.08) - fully m/cd item as per drg. 26116200690/03 with matl as per drg. , shoulder screw (hy-101.12) - fully m/cd item as per drg. 46116200740/03 with matl as per specn. hy10

Central Government/Public Sector

CTN :45011291

07 May, 2026 NA

Varanasi - Uttar Pradesh

Tender For tender for supply of fabrication - exp.jt.spacer st.1 (hy-101.35) - as per drg. 46116200825/02 with matl. specn. is 2062 gr b , control lever (var-02) as per drg. 46136200769/01 with matl as per specn. aa10119/15 , bull ring retainer hy-013.03 as per drg. 46016000040/02 with material as per specn. hy10199/03 , cover packing gland (hy-167.01.12) -as per drg. 36148000349/02 with matl as per specn. aa10108/11 , jr.cap screw lock plate (hy-220.1.09) as per drg. 46036000130/02 with matl. as per specn. aa10114/07 , spacer lip seal (hy-101.17) - as per drg. 36016200211/02 with matl as per specn. aa10119/15 , spring extn.cap (hy-133.a.04) -- fully m/cd item as per drg. 36136200561/01 with matl. as per drg. , thrust plate (f.e) (hy-220.1.50) -- fully m/cd item as per drg.46106290213/00 with matl. as per specn. aa10119/15 , air seal hsg. assly (hy-101.03) as per drg. 16116200404/08 with matl. as per specn. aa10119/15 , upper bearing housing cover (hy-132.a) - fully m/cd item as per drg. 16016200060/09 with matl as per specn. aa10119/15 , mill bottom cover assly. (hy-101.01) -- fabricated , assembled and fully m/cd item as per drg.16116200409/06 with matl. as per specn. aa10119/15 , link rod assly as per drg. 36136290148/01 with material as per drawing. , spring stud lock nut keeper (hy-133.b.13)- as per drg. 36136202770/00 with matl as per specn. aa10208/07 , jr. stop bolt nut (hy-014.03) - fully m/cd item as per drg. 46036000121/01 with matl. as per specn. aa10208/07 , jr.brg.spacer (hy-200.00) - fully m/cd item as per drg. 36036000113/05 with matl as per sepcn. sa106 gr. b , hi-tensile stud (hy-133.a.13) - fully m/cd item as per drg. 36136200482/01 with matl. hy10664/06 , pressure spring adjusting stud(hy-133.b.2.07) as per drg. 36136200658/03 (with maetric thread) with matl as per specn. hy-10664/06 , pr. spring clamp (hy-133.a.2.02) - fully m/cd item as per drg. 36136200484/02 with matl. is 2062 gr.b , jr. stop bolt (hy-014.02) - fully m/cd item as per drg. 36036000117/05 with matl. aa10208/07