Latest air tube Tenders | Government air tube Tenders

Central Government / Public Sector

CTN :40290197

23 May, 2025 NA

Jagatsinghapur - Odisha

Tender For supply of tube, finned, smls, cs, a106grb, pe, 114.3x8.56x9988, ibr , tube, finned, smls, cs, a106grb, pe, 114.3x8.56x10796, ibr

Central Government/Public Sector

CTN :40308919

22 May, 2025 NA

Burnpur - West Bengal

Tender For supply of tube, cs, a106 gr. b, 323.9mm

CTN :40285019

16 May, 2025 10.19 Lacs

Bhopal - Madhya Pradesh

Tender For supply and spares for chlorinator and overhauling of chlorinators at site 50 mld manubhan tekri wtp under bhopal - wall mounted type gas filter suitable for mounting chlorinator on top valve and helps to filterchlorine gas.make: chloro control/capco/capital control, chlorine gas filter cs-1suitable for arresting ferric chloride and other impurities carried outby chlorine gas also to trap the liquid drops. internal quartz made of s.s.316 test pressure to 40 bars.make: chloro control/capco/capital control, chlorine pressure gaugeglycerin or jelly filled diaphragm sealed type range: 0-21 kg/cm2connection: bottom " (m) bsp, container auxiliary isolating valveto is: 3224 aluminum silicon bronze body silver plated and monel metalspindle with teflon gas kit, clamp in one forget steel., tonner clamp for valve, flexible coil connection tube, annealedcopper, pvc sheathed, 6 5/16 nb, 18 swg, test pressure to 40kgs/cm , flexible coil connection fitting setset of: tonner valve wrench key: 01 no.tonner valve connection nut: 08 nos.union nut with compression ring: 20 sets.lead gasket g100: 40nos.make: chloro controltonner valve cap nut with blind lead gasket: 01 no. make: chloro control/capco/capital control, overhauling of chlorinator includingchanging of back body panel and inlet capsule assembly with yoke assembly suitable for cylinder/filter mounted chlorinator and repla cement of body screws, clamp, o-rings, etc as required, diaphragm bolt assembly for chlorinatorcomplete set

CTN :40266746

29 May, 2025 NA

Mumbai - Maharashtra

Tender For tender for supply of heat exchanger and afc tubes at bpcl mr - tube albr c68700 he 4000.5x15.88x2.11 mm , tube albr c68700 he 16ft 3/4in 16bwg -- , tube cs a179 ibr he 6000 lg 38.1 od 3.4t , tube cs a179 nace/hic 25mm 2.5mm 6000mm , tube sa334 gr 3 he 25mm 2.5mm6000mm , tube sa334 gr 6 he 25mm 2.5mm 9000mm , tube sa179 hic fin 25.4x2.769mm 10500m

Central Government / Public Sector

CTN :40134947

16 May, 2025 NA

Bongaigaon - Assam

Tender For corrigendum : supply of tube, cs, smls, a179, pe, 20x2, 6000l

CTN :40269757

19 May, 2025 NA

Multi City - Multi State

Tender For supply of merocel nasal dressing 8 cm without airway tube, pack of 1 piece.

Central Government/Public Sector

CTN :40241259

16 May, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For tender for supply of ibr and non ibr cs and as tubes - 1 - 156075630000 - tube od 32 x 5 tk x 5000 - sa210gra1 - ibr - as per unpriced bid , 2 - 156075660000 - tube od 28 x 3.5 tk x 5000 - sa210gra1 - ibr - as per unpriced bid , 3 - 151820070000 - pipe od 26.7 x 3.91 x 6000 - sa106grb - bhel-tpia - as per unpriced bid , 4 - 151820080000 - pipe od 26.7 x 5.56 x 6000 - sa106grb - ibr - as per unpriced bid , 5 - 156075640000 - tube od 28x3.5 tk x 5000 - sa213t11 - ibr - as per unpriced bid , 6 - 156075650000 - tube od 32x5 tk x 5000 - sa213t11 - ibr - as per unpriced bid , 7 - 156054720000 - las tube 76.1x6.3 x 6000 - sa213 t22 - bhel-tpia - as per unpriced bid

Central Government/Public Sector

CTN :40241009

16 May, 2025 NA

Bardhaman - West Bengal

Tender For supply of technical specification - tube stl is 1239 65mm nb medium , tube stl is 1239 100mm nb galvanised , tube stl is 1239 100mm nb black medium , tube cs astm a 210 gr a1 82 5x5 89mm , tube stl astm a106 114 3mm cold drawn , tube ss aisi 316 63 5mm

Central Government/Public Sector

CTN :40118894

14 May, 2025 NA

Bangalore - Karnataka

Tender For corrigendum : supply of erection materials for various thermal projects - nipple mat: astm a106 gr.b size: 3/4" nb sch 80 / length = 100 mm one end -3/4" ???? other end: plaincap/astm a 105-size-3/4" nptf , nipple mat: astm a335 p22 size: 3/4" nb sch 80 / length = 100 mm one end -3/4" ???? ,other end: plain cap/astm a 182 f22 -size - 3/4" nptf , snubber mat: a105 1/2" nptm x 1/2" nptf flow dir:-from 1/2" nptm to 1/2" nptf pressure testing 6000 psi , snubber mat:a182 f316l 1/2" nptm x 1/2" nptf flow dir:-from 1/2" nptf to 1/2" nptm pressure testing 3000 psi" , nut & tail fitting + ss 304 washers (02 nos.) mat: a 182 f22/size: id= 6.5 mm/od=19 mmnut:3/4" bspf , adapter mat: astm a182 f22 1/2" nptm x 3/4" bspm , nut & tail fitting + ss 304 washers (02 nos.) mat: a 105 / size: id=9 mm / od=19 mm nut: 3/4" bspf , forged adapter mat: astm a105 1/2" nptm x 3/4" bspm as per cl-6000 ansi b 16.11, nut & tail fitting + ss 316l washers (2 nos.) mat: a 182 f 316l/size: id = 7 mm/ d = 13 mm nut: 1/2 bspf , adapter+copper wash-ers/mat: a182f316l: 1/2 npt m x 1/2" bsp m , nut & tail fitting + ss 304 washers (02 nos.) mat: a 105 /size: id = 7 mm/od=13 mm nut: 1/2" bspf , forged adapter mat: astm a105 1/2" nptm x 1/2" bspm cl-3000 as per ansi b 16.11 , nut & tail a182 f91/ id = 6.5 mm/ d = 19 nut & tail fit-ting + ss 304 washers (2 nos.) mat: a 182 f91/size:id=6.5 mm/ d = 19 mmnut:3/4" bspf , forged adapter mat: astm a182 f91 size: 1/2"" nptm x 3/4"" bspm as per cl-9000 ansi b 16.11 , syphon rating 9000psi matl: a335 p91 size:1/2" nb-schxxs connect-ing:1/2"nb-sw , syphon mat: astm a335 p22 1/2" nb-schxxs connection: 1/2" nb-sw/pr. testing: 9000 psi , syphon mat: astm a106 gr.b 1/2" nb sch 160 connection: 1/2" nb-sw/pr.testing: 6000 psi , coupling mat: astm a105 galvanised to 10/15 microns size: 1/2" nptf/pr. testing: 800 psi , elbow mat: astm a105 gal-vanised to 10/15 microns size: 1/2" nptf/pr. testing: 800 psi, equal tee mat: astm a105 galvanised to 10/15 mi-cronssize: 1/2" nptf/pr. , testing: 800 psi , coupling mat: astm a105 galvanised to 10/15 microns size: 1" nptf/pr. testing: 800 psi , elbow mat: astm a105 gal-vanised to 10/15 microns size: 1" nptf/pr. testing: 800 psi , equal tee mat: astm a105 galvanised to 10/15 microns size: 1" nptf/pr. testing: 800 psi , reducer mat: astm a105 gal-vanised to 10/15 microns size: 1" nptf to 1/2" nptf/pr. testing: 800 psi , unequal tee/mat: astm a105 galvanised to 10/15 microns size: 2 x 1" nptf x 1/2" nptf/pr. testing: 800 psi , three piece union, matl: astm a105galvanised to 10/15 microns, size: 1" nptf, pressure rating: 800 psi , three piece union, matl: astm a105 galvanised to 10/15 microns, size: 1/2" nptf, pressure rating: 800 psi. , gi pipe-1" nb , seamless tube mat: astm a213 tp 316 size: 1/4" od x 1.1mm thk , tube fitting dfdc to suit 1/2" nptm x to suit 1/4" od ss tube mat:ss 316 , ss male connector dfdc size 1/4" nptm to suite 1/4" od ss tube, "gate valve rating: asa 150 lbs body:astm b62 trim:ss 304 size:1/2nptf."" ", pipe a106 grb 2" nb sch 40 , u clamp-to suit 1/2" nb pipe with nuts and washers mat: cs, galvanised to 10/15 mi-crons , u clamp-to suit 3/4" nb pipe with nuts and washers cs galvanised to 10/15 microns , u clamp-to suit 1" nb pipe with nuts and washers cs galvanised to 10/15 microns , funnel as per drawing ref:ce/416/funnel , male dfdc connector:material: super duplex ss size: 1/2" nptm x to suit 1/2"od ss tube - qty 165 nos. , seamless impulse tube material: super duplex ss size: 1/2" od, thickness 2.13mm - qty 160 nos , snubber material: super duplex ss size: 1/2" nptf x 1/2" nptm -qty 35 nos. , female dfdc connector: mate-rial: super duplex ss size: 1/2" nptm x to suit 1/2"od ss tube - qty 60 nos , 2 valve manifold with vent plug, 1/2" npt(f) pressure testing 3000 psi,- super duplex , 5 valve manifold with vent plug, 1/2" npt(f) pressure testing 3000 psi,- super duplex, elbow mat: astm a105 gal-vanised to 10/15 microns size: 1/2" nptf/pr. testing: 80

Central Government/Public Sector

CTN :39542183

12 May, 2025 NA

Nagpur - Maharashtra

Tender For corrigendum : tender for supply of carbon steel tubes - tube strt cs a210 a1 38 1mm 5 3mm , tube strt cs a210 c 44 5mm 7 1mm , tube strt rifle cs a210 c 51mm 6mm , tube strt cs a210 c 51mm 6 3mm 4 7m , tube strt rifle cs a210 c 51mm 7 1mm , tube strt cs a210 a1 51mm 7 1mm , tube strt cs a210 c 76 1mm 12 5mm 4 7m

Air Tube Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

Central Government/Public Sector

Central Government / Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector