Latest aircraft recovery equipment Tenders | Government aircraft recovery equipment Tenders

Central Government/Public Sector

CTN :44807356

13 Apr, 2026 NA

Kapurthala - Punjab

Tender For supply of ferritic steel sheet 3x1250x2100mm., as per drawing: rdso spec. no. c-k201, grade x2crni12 (409m) table 1&2, heat treatment condition 2b as per table-5., packing instruction: stainless steel sheets, coils and plates:- (a) stainless steel (austenitic & ferritic steel) coils. the coil shall be protected in reasonably good condition to withstand normal handling hazard during transit with the following provision as the barest minimum: i) coil should be wrapped with a layer of water proof paper through out whole length. ii) coil should be wrapped with a layer of biodegradeable sheet. iii) outer & inner of coil should be wrapped with gi sheet. iv) side of the coil should be covered with card board sheet. v) after this whole coil should be wrapped with biodegradeable plastic sheet of suitable thickness. vi) the inner edge of the coil should be protected by gi ring followed by another iron ring. vii) outer edge of the coil should be wrapped with gi ring. viii) coil should be securely strapped with minium 5 steel bands through the eyes of the coil and minium 3 steel bands on the circumference of the eye. ix) whole coil should be mounted on wooden blocks for easy lifting/stacking. x) the sheets in coil form for thickness 2mm and above shall have: inner dia of coil 450-800mm outer dia of coil 1000-1300mm weight of coil 2.4 - 10 tonnes xi) the sheets in coil form for thickness below 2mm shall have: inner dia of coil 450-650mm outer dia of coil 1000-1300mm weight of coil5.0 - 10 tonnes. (b) stainless steel (austenitic & ferritic steel plates/sheets) i) the sheets/plates shall be supplied in bundles of optimum weight: 2mt+/-10% & each sheet/plate shall be seprated with a layer of water proof paper, after this the whole bundle should be wrapped with double layer of water proof paper and a biodegradeable plastic sheet of suitable thickness. a metal protection in edges should also be provided. ii) all bundles shall have a minimum of 2 hoops upto 1.2 meter in length and one extra hoop for every additional meter. the bundles shall also be provided with skid (wooden packing under neath) to facilitate handling. mechanical damange & corrosion during transit ifany shall be at the cost of supplier. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :44800733

23 Apr, 2026 NA

Mumbai - Maharashtra

Tender For supply of hydraulic scissor lifting table of capacity 500 kgs with following specifications : (1) minimum height: 280 mm +/- 30%, (2) maximum height: 900 mm +/- 5%, platform size: 850 mm +/- 5% x 500 mm +/- 5% x 50 mm +/- 5%. make: nilkamal, vanjax, unique or equivalent. [ warranty period: 30 months after the date of delivery ]

corporations/Associations/Others

CTN :44766027

27 Apr, 2026 76.20 Lacs

Chandigarh - Chandigarh

Tender For supply of installation testing and commissioning of operation theatre on turnkey basis c - hydraulic large animal operation table , led ot lights ceiling mounted , led ot lights mobile , large animal examination cratetravis ss , large animal cratetravis for standing surgery ss , fabrication works as per requirement , fabrication works , small animal anaesthesia machine veterinary specific , large animals iron trolley for transportation , bedside multi para monitor veterinary , small animal surgery table veterinary , small animal examination table ss , surgical suction machine small animal , surgical suction machine large animal , electric cautery vessel sealer veterinary , mouth gags for animals , large animal slings lifting system , general surgery instruments set small animal , general surgery instruments set large animal fetotomy set , dressing drums , dressing trays , ot fumigator , double drum autoclave , stethoscope , constant rate infusion pump veterinary , veterinary ecg machine ) /bid number : gem/2026/b/7335743 * /dated: 06-04-2026 & & / bid document 1 / 24

Central Government/Public Sector

CTN :44720111

09 Apr, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - cond. and u/s ferrous fabricated materials of ms/ci scrap in nature such as weld mesh, ms duct, anti slip arrangement, earthen bond, galvanized (gi) sheet, ms sheet of various sorts and sizes, blower rotary forging, liner, guide fixtures, side frame fixtures, trolley of various sorts and sizes, trolley wheel & frame, battery fixing iron tray, ms pipe, coach/wagon stand, conveyor belt, ferrous body of auto change over panel, wire mesh, emu coach cut parts, ferrous portion of cab window assembly, sign on iron stand, salary bin, cupboard, structural items, different type of packing channels, trolley, undersling water tank, sand box, flat, trough sheet, coach cut up parts, ms tank, grill gate, rolling shutter, bench test, wheel with plate, bins, roller of shutter, regulator empty box, sliding doors, dolley,platform shelter, engine base rail of demu, collapsible gate, fob fencing, corrugated sheets, rectangular square tube &galvanised sheets, bogie mounted brake beam with composite brake blocks, gi sheets, pipe 8"(ductile)inside thin layer of concrete in full pipe&negligible quantity of rubber beeding, square &rectangular tubes & galvanised sheets, ms grill gate,grill window &stair case handle,ferrous body of various types of motor, angle and channel fabricated with nut, bolt,ladder,plate,grill, barricade, bolts, nuts, tray under frame, cut rod, rails of various sorts and sizes with/without concrete/brick/mud adhering, cut rails or rails used in support structures, coach head stock, coach parts,battery tray, ladder, all types of trolley wheels with minor nfs attachments, screens, channel post, sheets, stand, track machine cut up parts, ms pipes covered with or without rope &with or without parts of rubber, dome, vrla rack, vcb in dismantled condition, vrla battery box & clamp, stand, dtmf way station equipment box, led line display board, hydraulic lifting table with available fittings, vrla battery empty container, bed/base plate, fabricated cut rods,gi pipes, ci pipes and fittings, ms plate, roofsheets, angle, plate, platform bench, spring plank, clamps, cabinet, ms grill, sheets, ladder, steel gate, trolley,ms water tank, fire tender tank,roof truss supporting columns,purlins, sand box, fencing, tl rod, vcb panel, train display board, battery stand, boards, tools box, empty regulator &empty battery container, cut rod, ticket punching cut parts, hand rail, fabricated post/pipe/rod, strips, hoods, impellor, base plates, meshes, battery box frame, grs box, control panel, fan down rod, ac window covers ,angle / channels with/without rails, angle of tld, rack, s&t panels, main switch panel board w/o nfs attachments, ebc & rbc frame &enclosure,emu sliding door, high beam, silencer, , garden light post, tap changer cover with fiber attachments, empty battery container, stretcher, cupboard, dust bin, iron step, empty rotary junction box, empty regulator box, iron metal box, air reserviour compressor cylinder of varous sorts & sizes, garden light post, stand, mdb w/o non ferrous attachments, st light tubular post, gi/ms window, luggage rack, ,bed portion of weighing scale l with or without any minor non-ferrous attachments and all other scrap excluding ms hand hold in fabricated nature of sorts and sizes full/broken with/without other fs/ci/gi fittings in as is where is condition.pl no 98050126. note:(1) cutting is permitted to loadable size and for heavy nature items only. 2) during delivery if any major non-ferrous items found the same may be handed over to custodian. 3) jcb/crane loading permitted. location: behind a row bin 5 & 6

Central Government/Public Sector

CTN :44679023

20 Apr, 2026 NA

Jabalpur - Madhya Pradesh

Tender For supply of hydraulic scissor lift capacity-2-ton manually operated heavy duty double acting highpressure hydraulic pump , control steering for eassy turning with pulling handle, hard chrome plated heavyduty ram for long life, honed cylinder, replacable oil seal, double scissior hydraulic lifting table, enamal paint finish, platform size 1220mm x 610 mm, closed height 350-450 mm, max lifting height from ground level 1900-2100 mm , heavy duty ci four wheel size 200-250 mm [ warranty period: 30 months after the date of delivery ]

CTN :44601336

09 Apr, 2026 50.80 Lacs

Chatra - Jharkhand

Tender For day to day cleaning, maintenance and other plumbing items of transit camp d/02, subhasnagar, executive hostel and akashdeep building at dakra for a period of 2 years under a-c area, ccl. - cleaning & washing floor and walls every day, cleaning of commods, basin dusting of table, bed & furniture every day rubbing & polishing of floor every day removal of dry leaves, shrubs & other etc. and other waste from road & cleaning of waste storage tank and other misc job in transit camp, akashdeep building and executive hostel including cooking services in transit camp etc. complete, flushing of deep bore hole by drilling machine complete including supplying all materials, tools, drilling rig. air compressor and equipments as well as fuel lubricants and cost of transportation of rig machine., lifting of submersible pump-motor set from deep bore well with rigid pvc pipe of 50 mm dia including all accessories etc. complete including stacking all materials as per instruction of engineer-in-charge, lowering and commissioning of submersible pump in the deep bore well with rigid pvc pipe, all accessories etc. complete including cost of labour but excluding the cost of materials and fittings (cost of pump, cable, rigid pvc pipe, control panel to be paid separately), supplying 150 mm 3 hp submersible pump sets confirming to is 8034 and motor confirming to is 9783. pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and polypropylene/noryl impeller. motor suitable for working on 415v+10%, 3ph, 50 hz, a.c. supply with cable guard, thrust carbon fiber bearing to withstand entire hydraulic thrust, water proof winding shall be provided. the pump set shall be suitable for direct coupling. pump shall have suitable outlet as per manufacturers design. anti thrust stream lined non return valve shall be provided with pump. 3 meter submersible copper conductor cable in single/double run shall be provided witn each pump submersible pump 150 mm dia (with bronze/ss impeller) upto 25 stages, fully automatic star delta immersed submersible control panel three phases,415 v suitable for 1.5/2/3 hp umps isi marked of approved brand and as per instruction of eic, providing unplasticized polyvinyl chloride (upvc) pipes : (external work) 40 mm dia sch 80 as per astm -d1785 as per direction of eic.(supreme,astral or equivalent, 3 core pvc insulated, pvc sheated copper conductor flat submersible cable with copper conductor, pvc insulated and pvc sheated 3 core 4 sq mm, supplying of plastic rope 12 mm dia., providing and placing on terrace (at all floor levels) polyethylene water storage tank, isi : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank., providing and fixing unplasticized polyvinyl chloride (upvc) pipes, having thermal stability for hot & cold water supply including all upvc plain & brass threaded fittings this includes jointing of pipes & fittings with one step upvc solvent cement, trenching, refilling & testing of joints complete as per direction of engineer in charge. external work 15 mm nominal dia pipes, providing and fixing unplasticized polyvinyl chloride (upvc) pipes, having thermal stability for hot & cold water supply including all upvc plain & brass threaded fittings this includes jointing of pipes & fittings with one step upvc solvent cement, trenching, refilling & testing of joints complete as per direction of engineer in charge. external work 20 mm nominal dia pipes, providing and fixing of unplasticized polyvinyl chloride (upvc) pipes: (external work): 25 mm dia sch 80 as per astm- d1785 as per direction of eic. (supreme, astral or equivalent), providing and fixing p.v.c. low level flushing cistern with manually controlled device (handle lever) conforming to is : 7231, with all fittings and fixtures complete.10 litre capacity -

Central Government And Public Sector

CTN :44604896

30 Mar, 2026 NA

Multi City - Assam

Tender For auction sale of others - furniture scrap comprising of office chair, executive chair, bench chair, three seater station chair (iron and steel), arm chair, side chair, task chair, revolving chair, swivel chair, mesh chair and others different types/model of chair, table and furniture scarp (with foam). but purchaser to ensure complete lifting of the material attached. pl no.98090082

Central Government/Public Sector

CTN :44482130

07 Apr, 2026 NA

Dahod - Gujarat

Tender For supply of hydraulic lifting table

Central Government/Public Sector

CTN :44438349

10 Apr, 2026 NA

Valsad - Gujarat

Tender For supply of patform hyadraulic lifting table trolley

Central Government / Public Sector

CTN :44354010

30 Mar, 2026 NA

Sambalpur - Odisha

Tender For 1 ton lifting table x scissor lift table truck cap. 1000 kg, specification: platform size: 1200 mm x 610 mm x 60 mm, close height: 500 mm, lifting height: 1700 mm, wheel pu dia: 150 mm, packing dia: 1370 x 610 x 500 mm. make: groz, graco or equivalent. warranty: one year from the date of supply.

Aircraft Recovery Equipment Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors