Latest alarm clock scrap Tenders | Government alarm clock scrap Tenders

State Government

CTN :45445480

12 Jun, 2026 5.78 Lacs

Kollam - Kerala

Tender For deposit-shabda surabhi smart class rooms-mynagappally gramapanchayat-supply and installation of electronic equipments for arranging sabda surabhi smart class rooms in 6 govt. lp schools at mynagappally gramapanchayat, kollam.-general electronics work - public address system, od156085/2025-2026:supply and installation of desktop paging microphone with multi tone chime having flexible 30 cm gooseneck, frequency response minimum 50-10,000hz, sensitivity 2.0mv/pa or better, low noise cable with phone plug, supplied with 2x1.5v(um-3) pencil cells, aluminum die cast top and special high reliability switches with integrated led indicator etc. 3 year warrantypreferred make- ahuja, bogen, bosch, studiomaster., od156086/2025-2026:supply and installation of wall mount compact, high fidelity speaker - having rated power 30watts (30w / 15w / 7.5w / 3.75w), frequency response - 100hz to 20khz, sensitivity - 88 3db (1w, 1m), 5 inch woofer and 1 inch tweeter etc. warranty-3 yearspreferred make - studiomaster, ahuja, dynatech or equivalent , od156212/2025-2026:supply and installation of professional 19 inch rack mounted pa amplifier having minimum 4 balanced mic/line inputs (combo jacks), 1 auxiliary input, bass/treble and master controls, low cut switch, led indicators for power on, signal and clip, pre out and amp in (send/return), auxiliary line out, 160w rms, at 1 percent threshold, operating on ac 220-240v, 50hz/dc 24v/ dc and having 50-15000 hz 3db , speaker outputs of 4, 8, 16 ohms at 70v and 100v, built-in mp3 player warranty. 3 years. preferred make- ahuja, studio master or equivalent , od156243/2025-2026:supply and installation of professional 19 inch rack mounted pa amplifier having minimum 3balanced mic/line inputs (combo jacks), 1 auxiliary input, bass/treble and master controls, low cut switch, led indicators for power on, signal and clip, pre out and amp in (send/return), auxiliary line out, 80w rms, at 1percent threshold, operating on ac 220-240v, 50hz/dc 24v/ dc and having 50-15000 hz 3db , speaker outputs of 4, 8, 16 ohms at 70v and 100v, built-in mp3 player warranty. 3 years. preferred make- ahuja, studio master or equivalent , od156348/2025-2026:supply and installation of 16 channel zone selector with provision for switching a 100v audio signal to one or more of up to 16 zones.1 x 100v input, 16 x 100v outputs, manually switchable, built in relay for all call. preferred make: ahuja or equivalent warranty 3 years., 1.17.2:supplying and drawing following sizes of frls pvc insulated copper conductor, single core cable in the existing surface / recessed steel/ pvc conduit as required.2 x 1.5 sq. mm, 1.21.1:supplying and fixing of following sizes of medium class pvc conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm, od158699/2025-2026:supply and installation of necessary electrical accessories for giving proper electrical power to the rack - warranty 3 years., od158700/2025-2026:supply and installation of wooden rack for placing amplifier, cordless receiver and mixer unit.

CTN :45430786

18 Jun, 2026 NA

Ariyalur - Tamil Nadu

Tender For supply of electronics andcommunication engineering lab materials - electronics and communication engineering lab materials, dso (digital storage oscilloscope)bandwidth: 50 - 100 mhz.sampling rate: 1gs/s.channels: 2 (minimum)power supply: 100v 240v ac, 50-60 hzautomatic measurement: vpp, vavg,rms, frequency, period, vmax, vmin, rise time, fall time, + width, - width, +duty, - duty etc.,horizontal scale: 5 ns/div 100 ns/div or equivalentvertical resolution: 8 bits (2 channels simultaneously)vertical sensitivity: 1 mv/div 10 v/div (at input)waveform math: +, -, x , , invert, fft etc.,waveform storage: 16 waveforms or equivalentcommunication interface: usb host, usb interface.7-inch color display or equivalentbasic trigger functions, digital ic trainer kit with breadboard5v dc, 1a regulated power supply 12v dc / 15v, 200 ma regulated power supplysolderless breadboard to accommodate 8 16-pin icszif (zero insertion force) ic socketssupports ttl and cmos icslogic io leds for output monitoring8 buffered led outputs8 debounced switch inputsttl clock: 1 mhzvariable clock generator: 0.5 hz to 50 hzsingle pulse output: 100 ms (buffered, positive and negative outputs)one seven-segment display with 4 bcd inputsbuilt-in logic probesbuilt-in logic switchesexperiments on basic logic gates, flip-flops, counters, and multiplexers, eliminator transformer (stepdown)input - 220v - 240v ac, 50 hz, output-2v to 12v dc, 0-2 a ripple: 5mv, decade resistance boxrange: 1 to 10 m , steps: 1-10-100-1k-10k, accuracy 1%, suitable for filter and oscillator experiments, decade inductance boxrange: 1 h to 10 h, rotary switch selection, low loss inductors, accuracy 1%, , suitable for filter and oscillator experiments, 8051 micro controller kitoperating voltage: +5v dc4 kb flash (at89c51) / 8 kb flash (at89s52)ram: 128 bytes internal ram16 2 alphanumeric lcdpush buttons / tactile switchesdip switches for digital inputinbuilt adc interface : ldr,potinbuilt dac interfaceinbuilt stepper motor driver with stepper motorinbuilt dc motor driver with dc motor1x4 led array, 1 x4 keypad, 1x relay1x buzzer, 16x2 lcd display, 1x pwm driver1x hardware interrupt key, inbuilt rtcinbuilt eeprom, inbuilt uart module4x7 segment display, both assembly and c language programmable, pc interfaceable., single phase induction motorsingle phase induction motor, 230v ac, 50hz supply.power rating 1 hp (0.75 kw).speed 1440 rpm.capacitor start/run type suitable for lab useloading setup portable ammeter and digital tactometer contact type, auto transformerinput - single-phase, 230v/240v, 50 hz, 4a, ac output - 0 to 270vac, class "h" or class f insulation., temperature measurement kitsensors: rtd (pt-100), thermocouple (fe-k/j-type), and/or thermistor (ntc).display: 3 digit led/lcd digital display (typically 200mv fsd).temperature source: portable water kettle or heater block.signal conditioning: on-board circuitry for amplification, linearization, and cold junction compensation. test points: multiple 2mm/4mm banana sockets for monitoring input/output signals.power supply: 230v ac, 50hz, single-phase.accessories: includes a glass thermometer, ntc thermistor probe 10k, k-type thermocouple probe, patch cords, and instruction manual., ask modulation and demodulation kitmessage signal 1 : 8 bit variable data, amplitude 5vmessage signal 2 : debounce data, amplitude low (0) & high (5v)message signal 3 :fixed data 25k, 12.5k, 6.25k, 3.12k, amplitude 5vcarrier signal : sine wave frequency 200 khz, amplitude 5vmodulator type : switching icdemodulator : envelope detector & lpfcomparator : lm 311 basedsupply voltage (board) : +12v, +5v / dcsupply current : 100 ma (minimum)input voltage : 230 v/ 50 hz acinterface connectors : 2mm banana socket, dth trainer kitpower supply 200v to 240v ac, 50hz,dish antenna 1.5 aluminum steerable, lnb low noise block down converterinput frequency ku band.output frequency 950 to 1450 mhz.conversion gain 65 db.noise temp 35 degree k max.set top box receiver in traine

CTN :45449411

15 Jun, 2026 NA

Gaya - Bihar

Tender For supply of supply of three way cinema screen speaker system , supply of subwoofer specially developed for playback of digital audio , supply of nine point four chaneel eight k av receiver , supply of active cinema crossover designed for cinema audio , supply of cinema surround speaker designed for immersive sound playback , supply of two way passive speaker with frequency , supply of two way surround speaker system with frequency , supply of quad channel power amplifier with frequency , supply of eight in eight out digital speaker processor , supply of dual channel power amplifier with output power , supply of dual channel power amplifier with frequency , supply of preset selector unit , supply of thirty six u rack , supply of bulk cables and connectors , installation and commisioning

Central Government/Public Sector

CTN :45318182

08 Jun, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : supply of single frequency transducer , trans receiver , display unit , flush mounted transducer steel tank , matching box , water tight junctions boxes, cable connectors, glands, interface converters, power supply converter with auto transfer switch, nmea buffer , transducer cable , special cables , accessories and installation material , on board sapres , special tools , any other items required , documentation , service engineer charges

Central Government/Public Sector

CTN :45391002

22 Jun, 2026 NA

Mumbai - Maharashtra

Tender For trans-receiver handheld 5-watt digital vhf set along with two set of oem approved rechargeable battery including one as spare, rapid battery charger, helical antenna and belt clip conforming to rdso specification no. rdso/spn/tc/107/2018 rev 2.1 or later. additional requirements: 1) spot frequency for electrical dept.161.425mhz and 160.400 mhz 2) technical parameter of vhf set should be as per ci 5-b (without display) of rdso specification rdso/spn/tc/107 /2018 ver. 2.1 or later with following special feature - "operate in both analog and digital mode, it should switch over to analog/ digital mode automatically as per received signal irrespective of presently selected mode (analog/digital)" 3) battery type - li-ion. 4) battery capacity - minimum 2300 mah. 5) one number of tuning kit with software to program shall be provided per 200 sets. 6) spare antenna for vhf set: 10% of total vhf set quantity antenna shall be provided as spare. 7) warranty - warranty for radios and rapid chargers shall be covered for at least 5 years, warranty for battery packs shall be for at least 1 year. 8) radio model should be poc passed by rdso and mtcte certificate should be submitted at the time of supply. [ warranty period: 30 months after the date of delivery] ]

CTN :45404144

09 Jun, 2026 NA

Palacode - Tamil Nadu

Tender For supply of equipment for electronics and communication engineering department - supply of equipment for electronics and cmmunication engineering department, 8051 micro controller kit :specification : operating voltage: +5 v dc. flash memory: 4 kb (at89c51) / 8 kb (at89s52). ram: 128 bytes internal ram. 16 2 alphanumeric lcd display. push buttons / tactile switches. dip switches for digital input. inbuilt adc interface: ldr, potentiometer. inbuilt dac interface. inbuilt stepper motor driver with stepper motor. inbuilt dc motor driver with dc motor. 1 4 led array, 1 4 keypad, 1 relay. 1 buzzer, 16 2 lcd display, 1 pwm driver. 1 hardware interrupt key, inbuilt rtc. inbuilt eeprom and uart module. 4 7-segment display. supports both assembly and c language programming. pc interfaceable., temperaturemeasurementkitspecification : sensors:rtd (pt-100), thermocouple (fe-k/j-type), and/orthermistor (ntc). display: 3 digit led/lcd digital display(typically 200 mv fsd). temperature source: portable water kettle orheater block. signal conditioning: on-board circuitry foramplification, linearization, and cold junctioncompensation. test points: multiple 2 mm / 4 mm banana socketsfor monitoring input/output signals. power supply: 230 v ac, 50 hz, single-phase. accessories: glass thermometer, 10 k ntcthermistor probe, k-type thermocouple probe,patch cords and user manual., ask modulationanddemodulation kit:specification : message signal1:8-bit variable data,amplitude 5v. message signal 2:debounced data, amplitude low (0) and high (5 v). message signal 3:fixed data 25 khz, 12.5 khz, 6.25 khz, 3.12 khz,amplitude 5 v. carrier signal: sine wave, frequency 200 khz,amplitude 5 v. modulator type: switching modulator using analogswitch / transistor switching ic. demodulator: envelope detector and lpf. comparator: lm311 based. supply voltage (board): +12 v, +5 v dc. supply current: 100 ma minimum. input voltage: 230 v ac, 50 hz. interface connectors: 2 mm banana socket., dth trainer kit:specification :power supply: 200 v to 240 v ac, 50 hz.dish antenna: 1.5 ft aluminium steerable dish antenna.lnb (low noise block down converter): input frequency: ku-band. output frequency: 950 mhz to 1450 mhz. conversion gain: 65 db. noise temperature: 35 k (max).set-top box receiver in trainer form: if frequency: 70 mhz. video bandwidth: 50 hz to 5 mhz. video output level: 1 vpp at 75 load. video polarity: normal/inverted, switch selectable. audio subcarrier frequency:tunable from 5.0 mhz to 8.0 mhz. remote control provided. hdmi cable: 10 m.controls: channel selection. volume control.fault simulation: five built-in simulated faults for troubleshootingexperiments. if signal disconnected. video output fault. audio mute fault. tuner misalignment. rf output interruption.pcb size: 15" 12" with multicolour section-wise blockdiagram.standard accessories: 1.5 ft dish antenna. lnb. trainer pcb. dish connecting wire. audio-video cable. user manual. acrylic cover. hardware materials for assembly of dish antenna.additional features: dth subscription connection withdoordarshanfree channels. free-to-air channel demonstration., fpga trainer kit:specification : must use industry-standard mid-range fpgadevice usb-jtag programmable, compatible withvivado ise (webpack). power supply: 5 v dc through usb or externaladapter. on-board peripherals: leds, switches, pushbuttons, 7-segment display,clock source, gpio /pmod expansion ports, uart, vga / hdmi, usbuartbridge, usb cable. user manual.

CTN :45177467

04 Jun, 2026 NA

Kamrup - Assam

Tender For bid to ras supply of falcon 5 carbon fiber drone frame for drone , zerodrag nova boost stack f4 55a am32 esc for drone , t hobby 1950kv brushless motor for drone , geprc 5 8g 2 5w vtx pro for drone , falcon nv 1800 night vision camera for drone , geprc m10i gps for drone , gemfan 5 inch hurricane 3 blade propeller for drone , geprc 5 8g antenna rhcp sma 120mm for drone , aerocell battery 6sip 4500mah for drone , radiomaster xr1 nano multi frequency expressslrs receiver 2400 for drone , radiomaster pocket radio controller m2 elrs charcoal fcc mode 2 for drone , battery strap 20x300mm for drone , vion aerial vision 800d goggles dual diversity 5 8ghz for drone , triple feed patch geprc antenna 5 8g for drone

CTN :45389415

11 Jun, 2026 NA

Kamrup - Assam

Tender For supply of gep 3 inch frame gep cl 35 v3 , geprc 5 point 8 g antenna rhcp sma 120 mm , aerocell battery 4s1p 4500 mah , falcon nv 1800 night vision camera , radiomaster xr1 nano multi frequency expresslrs receiver 2400 , gep m10q gps , gemfan 3 point 5 inch hurricane 3 blade propeller clear gray , geprc 2105 point 5 2650 kv motor

CTN :45363413

15 Jun, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For supply of euipments for ece lab - ece laboratory, dth trainer kit power supply 200v to 240v ac, 50hz, dish antenna 1.5 aluminum steerable, lnb low noise block down converter input frequency ku band.output frequency 950 to 1450 mhz. conversion gain 65 db. noise temp 35 degree k max. set top box receiver in trainer form if frequency 70 mhz.video bandwidth 50 hz to 5 mhz. video output level 1 vpp at 75 ohm load video polarity normal and or inverted switch selectable audio sub carrier frequency tunable from 5.0 to 8.0 mhz. r.f output channel no 2 uplink satellite insat 4a controls channel selecting, volume, faults 5 no. pcb size 15"x12" with block diagram in multicolor section wise standard accessories dish antenna1.5 feet,lnb,trainer pcb,dish connecting wire, audio-video cable,teaching manual,acrylic cover. hardware material for assembly of dish antenna. dth subscription connection doordarshan free channels

CTN :45379134

10 Jun, 2026 NA

Arakandanallur - Tamil Nadu

Tender For for electrical and communication engineering department lab equipments are required as per new syllabus - upgradation of labarotariesece department, 8051 micro controller kit operating voltage: +5 v dc. flash memory: 4 kb (at89c51) / 8 kb (at89s52). ram: 128 bytes internal ram. 16 2 alphanumeric lcd display. push buttons / tactile switches. dip switches for digital input. inbuilt adc interface: ldr, potentiometer. inbuilt dac interface. inbuilt stepper motor driver with stepper motor. inbuilt dc motor driver with dc motor. 1 4 led array, 1 4 keypad, 1 relay. 1 buzzer, 16 2 lcd display, 1 pwm driver. 1 hardware interrupt key, inbuilt rtc. inbuilt eeprom and uart module. 4 7-segment display. supports both assembly and c language programming. pc interfaceable., single phase induction motor1 hp, 230 v ac, 1500 rpm with loading arrangement 1 no.voltmeter: (0 300) v ac, 96 96 mm with input terminals 1 no.ammeter: (0 10) a ac, 96 96 mm with input terminals 1 no.wattmeter: 2 kw, 96 96 mm with input terminals 1 no.power factor meter: 96 96 mm with input terminals 1 no.auto transformer: 0 300 v, 1 variac 1 no.mcb: 2-pole, 40 a / 230 v ac 1 no.digital rpm indicator with proximity sensor 1 no.aluminium brake drum: 230 mm diameter 1 no.spring balance: (0 25) kg 02 nos.circuit diagram printed on front panel with instruments and connecting terminals.motor and loading arrangement mounted on rigidchannel frame with anti-vibration mounting pads, m12 1.5 bolt & nut, 85 mm dia 4 nos.mild steel powder-coated electrical panel tablesetup., auto transformerinput: 230 240 v ac, 50 hz.output: variable (0 270) v ac.rating: 1 kva.insulation class: class f / class h.construction: copper winding with carbon brush arrangement.mounting: bench-top / panel type.protection: suitable fuse / overload protection., dth trainer kitpower supply: 200 v to 240 v ac, 50 hz. dish antenna: 1.5 ft aluminium steerable dish antenna.lnb (low noise block down converter): input frequency: ku-band. output frequency: 950 mhz to 1450 mhz. conversion gain: 65 db. noise temperature: 35 k (max).set-top box receiver in trainer form: if frequency: 70 mhz. video bandwidth: 50 hz to 5 mhz. video output level: 1 vpp at 75 load. video polarity: normal/inverted, switch selectable. audio subcarrier frequency:tunable from 5.0 mhz to 8.0 mhz. remote control provided. hdmi cable: 10 m. controls: channel selection. volume control. fault simulation: five built-in simulated faults for troubleshooting experiments. if signal disconnected. video output fault. audio mute fault. tuner misalignment. rf output interruption. pcb size: 15" 12" with multicolour section-wise block diagram.standard accessories: 1.5 ft dish antenna. lnb. trainer pcb. dish connecting wire. audio-video cable. user manual. acrylic cover. hardware materials for assembly of dish antenna. additional features: dth subscription connection with doordarshanfree channels., sim reader trainer kitpower supply: operates on 230 v ac 10%, 50 hz mains supply. built-in regulated smps power supply. operating dc supply: 5 v / 12 v with overload and short-circuit protection.sim card interface: supports gsm sim cards compatible with 2g / 3g / 4g / 5g networks. sim card read/write interface. supports sim card initialization, authentication, and communication functions. compatible with standard 6-pin / 8-pin sim card sockets.communication interface: usb 2.0 interface for pc communication. rs-232 serial communication interface. uart communication facility for embedded system interfacing.sim operating parameters: selectable sim clock frequencies: 3.579 mhz 7.159 mhz 14.318 mhz sim supply voltage selection facility. sim reset and activation control. supported protocols and standards: gsm etsi 07.07 and etsi 07.05 at command support. iso/iec 7816 smart card communication support. sim communication command monitoring facility. hardware features: on-board sim card socket. led indication for: power status sim detection reset activity data transmission/r

Alarm Clock Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government/Public Sector