Latest alarm device Tenders | Government alarm device Tenders

CTN :44784971

16 Apr, 2026 NA

Multi City - West Bengal

Tender For corrigendum : auction sale of rolling stock - lot no.ws/s-yd/01/04/26-27/bg/cond./8w/wgn. description- iron and steel scrap cutup parts of bg cond./8w/wgn. without contents if any. 1) special repair 30069003322 bcnm1 (nlb) 2) er 10029695316 boxnr (nlb) steel body 3) wr 10089660538 boxnm1 (nlb) 4) special repair 30069032001 bcnm1 (nlb) 5) special repair 30069003650 bcnm1 (nlb) 6) er 72029661388 bobrnm1 (nlb) 7) er 72029681850 bobrnm1 (nlb) 8) cr 10019601051 boxnm1 (nlb) 9) nr 30039006728 bcnm1 (nlb) 10) se 10079632712 boxnm1 (wm) nb: (1): i) wagons are to be sold without 18 nos. nlb trolleys against special repairl. no. 01 to 09. ii) wagons are to be sold with 02 nos. wm trolleys against special repairl. no. 10. iii) wagon special repairl no 01 to 10 to be sold without 40 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower, etc and other excluded fitting. * **excluded fitting list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock- a) all excluded materials including wheel sets and nlb trolleys are to be handed over by the purchaser at the nominated location suggested by the concerned sse for which they have to arrange labour, tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 present of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is damaged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3). the firm shall follow all rules regarding the loading of vehicle as per rto /statuary bodies governed time to time. railway will not be responsible any breach of rules during loading / transportation done by the purchaser. nb: (4) delivery will be given in numbers.

CTN :44784972

16 Apr, 2026 NA

Multi City - West Bengal

Tender For corrigendum : auction sale of rolling stock - lot no.ws/s-yd/02/04/26-27/bg/cond./8w/wgn. description- iron and steel scrap cutup parts of bg cond./8w/wgn. without contents if any. 1) se 12079560026 boxnhsm1 (nlb) 2) se 25079662607 boxnr (nlb) steel body 3) se 75079260396 bobsnm1 (nlb) 4) se 75079260365 bobsnm1 (nlb) 5) se 75079216683 bobsnm1 (nlb) 6) special repair 10069649256 boxnm1 (nlb) 7) sc 30099081895 bcnm1 (nlb) 8) se 25079661693 boxnr (nlb) steel body 9) sc 30099060968 bcnm1 (wm) nb: (1): i) wagons are to be sold without 16 nos. nlb trolleys against special repairl. no. 01 to 08. ii) wagons are to be sold with 02 nos. wm trolleys against special repairl. no. 09. iii) wagon special repairl no 01 to 09 to be sold without 36 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower, etc and other excluded fitting. * **excluded fitting list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock- a) all excluded materials including wheel sets and nlb trolleys are to be handed over by the purchaser at the nominated location suggested by the concerned sse for which they have to arrange labour, tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 present of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is damaged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3). the firm shall follow all rules regarding the loading of vehicle as per rto /statuary bodies governed time to time. railway will not be responsible any breach of rules during loading / transportation done by the purchaser. nb: (4) delivery will be given in numbers.

State Government

CTN :44695107

15 Apr, 2026 NA

Bharuch - Gujarat

Tender For tender for repair and maintenance of phut-rajpardi group water supply scheme under pilot project at main headworks and sub-headworks in taluka jhagadia and netrang, district bharuch, covering filtered pure drinking water with 5% sodium hypochlorite, pump rooms, hdpe storage tanks, machinery safety equipment, and electrical works.

State Government

CTN :44683273

03 Apr, 2026 9.12 Lacs

Fatehabad - Haryana

Tender For comprehensive mtc and operation of distributions consumable items t and p items safety equipment comprehensive mtc operation repair and desilting of inlet channel etc complete in all respect - bhuthan kalan and bhuthan khurd:- dnit for annual maintenance 2 nos. rural canal based water supply scheme i.e bhuthan kalan and bhuthan khurd and 1 nos.t/well bhima basti under section no.1 phe sub division no.2 comprehensive mtc. and operation of distributions, consumable items, t and p items/safety equipment’s, comprehensive mtc. operation, repair and desilting of inlet channel etc. complete in all respect. and all other works contingent thereto (rs. 9.13lakhs)

State Government

CTN :44683279

03 Apr, 2026 7.67 Lacs

Fatehabad - Haryana

Tender For comprehensive maintenanceand operation of distributions consumable items t and p items safety equipment taking out top layer filter media and replacing the same after screened, washed and cleaned, comprehensive maintenance operation, repair and desilting - s.p daroli plus boosting station chabarwal, dhani puribuyan and suli khera plus b/stn - annual maintenance 2 nos. rural canal based water supply scheme i.e s.p daroli plus boosting station chabarwal, dhani puribuyan and suli khera plus b/stn station under section no.3 phe sub division no 3 `comprehensive mtc. and operation of distributions, consumable items, t and p items/safety equipment’s, comprehensive mtc. operation, repair and desilting of inlet channel etc. (rs. 7.67 lakhs)

State Government

CTN :44683280

03 Apr, 2026 14.00 Lacs

Fatehabad - Haryana

Tender For comprehensive mtc and operation of distributions consumable items t and p items safety equipment taking out top layer filter media and replacing the same after screened washed and cleaned comprehensive mtc operation repair and desilting - salam khera and dharnia - annual maintenance 2 nos. rural canal based water supply scheme i.e salam khera, dharnia plus boosting station chaplamori and badopal under section no.1 phe sub division no 3 `comprehensive mtc. and operation of distributions, consumable items, t and p items/safety equipment’s, comprehensive mtc. operation, repair and desilting of inlet channel etc (rs.14.00 lakhs)

State Government

CTN :44683281

03 Apr, 2026 14.72 Lacs

Fatehabad - Haryana

Tender For comprehensive mtc and operation of distributions consumable items t and p items safety equipment comprehensive mtc operation repair and desilting of inlet channel etc complete in all respect - mp rohi and kumharia - annual maintenance 2 nos. rural canal based water supply scheme i.e m.p. rohi and kumharia under section no.2 phe sub division no 2 `comprehensive mtc. and operation of distributions, consumable items, t and p items/safety equipment’s, comprehensive mtc. operation, repair and desilting of inlet channel etc. complete in all respect. (rs. 14.72 lakhs)

State Government

CTN :44683278

03 Apr, 2026 9.44 Lacs

Fatehabad - Haryana

Tender For comprehensive maintenance and operation of distributions consumable items t and p items safety equipment taking out top layer filter media and replacing the same after screened, washed and cleaned, comprehensive maintenance operation, repair and desilting of

Central Government/Public Sector

CTN :44514278

07 Apr, 2026 NA

Nancowrie - Andaman And Nicobar Islands

Tender For supply of mechanical tools and plants for alhw campbell bay e e - grinding spindle thread 100 mm disc , 7 inch premium abrasive cut off wheel set of 10 metal cutting discs 180x1.6x22mm for iron, steel and other metals high performance, durable, heat resistant, low vibration , 100mm 4 inch gc wheel flexible grinding disc gc60 premium marble granite stone and glass polishing and grinding wheel with long life and high removal rate , radial heavy duty bench drilling machine , tyre lever 30 inch heavy duty , crowbar 10 kg , heavy-duty multipurpose metal oil can 0.5 pint 236 ml , diesel injector nozzle pop tester dual scale gauge 420 kg 6000 psi accessories , chain pulley block various size 03 ton , 05 ton and 10 ton capacity 25 m lift height , heavy duty work gloves, , full body safety harness for fall arrest and rope access adjustable straps with d-ring construction harness and climbing harness fall protection gear , nose pliers long make taparia , circlip pliers od make taparia , circlip pliers id make taparia , cutting pliers make taparia , double face sledge hammer 1 kg make taparia , double face sledge hammer 5 kg make taparia , double face sledge hammer 8 kg make taparia , bpt10 bucket grease dispenser with trolley and variable stroke handle 20 kg capacity high pressure pump 5000psi use for automotive, industrial equipment, heavy machinery greasing , extra heavy duty tarpaulins - 7.6 mtrs x 5.0 mtrs type- xhn colour- green- orange-blue make- mipatex- canvas- reputed make , wd 40 rustoline spray -200 ml , puncture repair kit for heavy machineries tyre with all accessories , air compressor single phase with all accessories , wielding machine single phase with all accessories , wielding machine three phase with all accessories , grass cutter machine with all accessories , heavy duty vacuum cleaner with all accessories , hand rotary barrel pump with flexible hose0.75 inch , 10 length , bosch gco 220 professional electric chop saw powerful cut off saw machine c-handle rated power of 2200 w speed upto 3800 rpm long lifespan disc diameter 355 mm 14 inch , bosch professional cutting- expert for heavy metal- 14inch , ingco air impact wrench heavy duty , electronic digital dial indicator with magnetic base holder fine adjustable long arm 0-1inch metric conversion professional gauge 0.01mm , steel measurement tape - 05 mtr length , steel measurement tape - 30 mtr length , 3 jaw chuck for madras lathe, type mgd-2 lathe size 165 x 1000 mm , 4 jaw chuck for madras lathe, type mgd-2 lathe size 165 x 1000 mm , 4 inch 3 leg bearing puller lever tool , 8 inch 3 leg bearing puller lever tool , gsk cut metric tap and die set thread m3 to m12 thread repair kit plug metric wrench die holder screwdriver with storage case - 20 pcs, clear madras lathe, type mgd-2 lathe size 165 x 1000 mm , lathe threading boring bar turning tool holder t8 wrench set metal 1 x snr0008k11 inner threading tool holder 1 x t8 wrench , 0.63 inch lathe tool holder mtjnr1616h16 indexable carbide turning tool holder and 5pcs tnmg160404 tnmg 331 carbide insert lathe tool mtjnr1616h16 5pcs tnmg 331 madras lathe mgd-2 size 165x1000 mm , hss lathe form tool 8 piece set-hard and ground-turning, threading parting machine tools m2 grade madras lathe, type mgd-2 lathe size 165 x 1000 mm , 7-pcs concrete and masonry drill bit set,cement drill bits for concrete brick wall tile glass ceramic masonry bit 3-12mm sizes industrial strength carbide bit tip madras lathe mgd-2 size 165 x1000 mm , vernier caliper digital 300 mm lcd display,stainless steel caliper dg-300mm , file tools set, premium hardened drop forged alloy steel file tools,includes flat, flatwarding,square,triangular, round,half-round files5mm //bid details 2 / 70 flatwarding,square,triangular, round,half-round files5mm 180mm in size per one madras lathe,mgd-2 size 165 x 1000 mm , mini cut off parting tool holder for unimat, seig, emco, proxxons, grizzly madras lathe, type mgd-2 lathe size 165 x 1000 mm , mini cut off parting

CTN :44478676

28 Mar, 2026 NA

Bharuch - Gujarat

Tender For rate contract for streetlights, led lights and high-mast repair and maintenance of village panchayats in the village panchayat area and annual monopoly of repair and maintenance of rural water lines in the water supply scheme in rural areas and cctv in rural areas. annual monopoly of camera system and public accounting system repair and maintenance and annual monopoly of providing laborers for sanitation work in rural areas and annual monopoly of providing gardeners for sanitation work in rural gardens. agencies wishing to provide the necessary mechanical machinery and experienced workers and laborers in all these works, agencies willing to provide skilled-semi-skilled laborers with safety equipment

Alarm Device Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

State Government

State Government

State Government

Central Government/Public Sector