Latest alarm monitoring machine Tenders | Government alarm monitoring machine Tenders

CTN :45609156

02 Jul, 2026 NA

Gwalior - Madhya Pradesh

Tender For corrigendum : supply of caliper assembly r808 rh scorpio , caliper assembly r808 lh scorpio , clutch driven plate scorpio , clutch cover assembly scorpio , clutch release thrust bearing scorpio , assy hose air cleaner intake scorpio , brake pad r808 scorpio , temperature sensor for egr scorpio , trinary pressure switch scorpio , brush carrier assy tata , bendix drive tata , tank coolant vehicular tata , bearing tapered roller outer tata , gear fly wheel ring tata , plate clutch hh , plate clutch pressure hh , input shaft ss assy fire pump tff , roller bearing outer als , compressor assy safari , weather strip door rh mg

CTN :45713010

07 Jul, 2026 NA

Delhi - Delhi

Tender For supply of sitc control panel 2 loops , sitc control panel 4 loops , sitc of network module the module shall connect panels , sitc of active repeater panel to be integrated with fire alarm , sitc of addressable ip67 rated multi- heat sensor , sitc of analogue addressable photo thermal smoke detector , sitcof addressable multi sensor with co detection , sitcc of response indicator on surface or recessed , sitc of short circuit isolator module base with all mounting , sitc of analogue addressable dual action , sitc of addressable horn with a maximum output of up to 100 db a , sitc of analogue addressable supervised monitor module , sitc of analogue addressable supervised control module , supplying and laying through walls , complete earthing electrode and excavation etc , earth continuity conductor , false ceiling board and cross tee , butterfly valves (v2) as per is 13095 (q2) * /bid number : gem/2026/b/7624747 + /dated: 27-06-2026 ' ' / bid document 1 / 20

CTN :45713123

07 Jul, 2026 NA

Delhi - Delhi

Tender For supply of sitc control panel 2 loops , sitc control panel 4 loops , sitc of network module the module shall connect panels , sitc of active repeater panel to be integrated with fire alarm , sitc of addressable ip67 rated multi- heat sensor , sitc of analogue addressable photo thermal smoke detector , sitcof addressable multi sensor with co detection , sitcc of response indicator on surface or recessed , sitc of short circuit isolator module base with all mounting , sitc of analogue addressable dual action , sitc of addressable horn with a maximum output of up to 100 db a , sitc of analogue addressable supervised monitor module , sitc of analogue addressable supervised control module , supplying and laying through walls , complete earthing electrode and excavation etc , earth continuity conductor , false ceiling board and cross tee , butterfly valves (v2) as per is 13095 (q2) * /bid number : gem/2026/b/7624664 + /dated: 27-06-2026 ' ' / bid document 1 / 25

CTN :44982529

30 Jun, 2026 NA

Jodhpur - Rajasthan

Tender For bid to ras supply of ceiling speakers , column array speakers , amplifier for ceiling speakers , amplifier for column array speakers , digital signal processor , boundary layer microphones , on off button for boundary layer microphones , switch box for boundary layer microphones , ceiling tile microphone array , main display , side display , annotation panel , cable manager for table , hdmi switcher , hdmi splitter , hdmi extender , usb tx multiformat switcher , usb rx multi format switcher , usb data matrix switch , ptz camera , speaker tracking camera , hdmi to usb capture card , voice tracking device , control system with touch controller , network switch , room scheduler , pdu with humidity and temperature sensor , ceiling mount document scanner , equipment rack , ups 10 kva ups with 60 min backup , ups 3 kva ups with 60 min back up , acoustic door with fitting laminate and door frame , chair , hot and cold ac 2 ton , room air purifier , bio metric door access control , auto fire suppression system for av rack , high quality wireless keyboard and mouse , led surface recessed mounted panel with luminous web , 12 channel signal dimmer controller , 12 channel controller , display keypad panel for workstations , network router for automation system , sitc supply installation testing and commissioning , acoustic wall paneling , acoustic false ceiling , wooden conference table , executive chair , acoustic carpet flooring , power supply for lighting control network , lighting control communicaiton gateway

CTN :45716225

09 Jul, 2026 NA

Ernakulam - Kerala

Tender For supply of sensor smoke 40989754 tyco fire alarm , base detector 40989789 tyco fire alarm , network card simplex 41006078 tyco , card loop 41003104 tyco fire alarm , module monitor 40909001 tyco fire alarm

CTN :45708877

27 Jul, 2026 NA

Asansol - West Bengal

Tender For corrigendum : supply and commissioning of fire detection unit testing jig, supply:230 v ac 1ph, provision of 25 pin connector with 24 volt supply, visual indication of normal state and fault state, audio and visual indication of alarm state 1 and alarm state 2, dpm for air flow sensor signal display. [ warranty period: 30 months after the date of delivery ] ]

CTN :45696125

13 Jul, 2026 NA

Palacode - Tamil Nadu

Tender For supply of equipment for mechanical engineering department - supply of equipment for mechanical engineering department, lathe machine :specification :bed: 2v & 2 flat, induction hardened and ground minimum bed length: 1375 mm bed width: 240 mm capacity: height of centre: 165 mm swing over bed: 320 mm swing over gap: 510 mm swing over cross slide: 180 mm distance between centres: 650 mm slides: cross slide travel: 200 mm compound slide travel: 115 mm spindle: spindle bore: 40 mm spindle nose: thread type, 62 mm spindle taper: mt-3 tail stock: quill diameter: 38.1 mm taper: mt-3 travel: 120 mm speed: no. of speeds: minimum 8 range: (40 800 )rpm threading: metric: (1 6 )mm (min 13 steps) english: (2 24 )tpi (min 19 steps) lead screw: (1 4) tpi electrical: motor: 1.5 hp, 230v/415v, 50 hz drive: v-belt structure: bed: close-grained cast iron (fg 260) gears: hardened steel base: rigid cast iron stand , open cup apparatus :specification :standard compliance: astm d92 / is 1448 (part 69) test method: open cup flash and fire point determination test cup: brass, precision machined with heat resistant handle heater: electric heater (1000 w 10% nickel chromium) with variable control heating rate: 5 6 c per minute (as per standard) temperature range: -6 to 400 c thermometer: astm 11c or equivalent flame applicator: gas test flame with fine control valvebody: stainless steel housing display: analog / digital temperature indicator power supply: 230v ac, 50 hz safety: overheat protection heat insulation , closed cup apparatus :specification :standard compliance: astm d93 / is 1448 (part 21) test cup:brass cup diameter: 50.7 50.8 mm capacity: minimum 70 ml stirring system heater: electric heater 650 w 10% heating rate: 1 12 c/min adjustable ignition: pilot flame with automatic shutter mechanism temperature measurement: thermometer or digital sensor(ip-28c or astm) display: digital temperature display power supply: 230v ac, 50 hz safety:over-temperature cut-off flame safety control , tail stock assembly :specification :medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, slip gauge :specification :set size: m87 (87 pieces) or equivalent range: 1.001 mm to 100 mm step sizes: 0.001 mm 0.005 mm 0.01 mm material: high-grade alloy steel / tungsten carbide (preferred) hardness: hrc 63 65 accuracy: grade: grade 1 or grade 2 flatne flatness / parallelism: 0.5 m stored in protective wooden boxes to prevent wear; calibration grades include charts for exact sizes , dc motor:specification :type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 pole construction: laminated stator salient poles accessible armature features: cut section / open type suitable for dismantling and reassembly, hydraulic cylinder :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steel calibration grades include charts for exact sizes supply: mounted on training base suitable for dismantling and inspection , hydraulic operated directional control valves (dcv):specification :type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study , bearing with shaft assembly :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply:mounted on training base suitable for dismantling and inspection , coupling unit using driving and dr

CTN :45676692

09 Jul, 2026 NA

Chennai - Tamil Nadu

Tender For purchase of fire safety and fighting laboratory equipment for fts department - purchase of fire safety and fighting laboratory equipment for fts department, cleveland open cup (coc) apparatus standard compliance: astm d92 / is 1448 (part 69) test method: open cup flash and fire point determination test cup: brass, precision machined with heat resistant handle heater: electric heater (1000 w 10% nickel chromium) with variable control heating rate: 5 c per minute (as per standard) temperature range: (-6 to 400) c thermometer: astm 11c or equivalent flame applicator: gas test flame with fine control valve body: stainless steel housing display: analog / digital temperature indicator power supply: 230v ac, 50 hzsafety: overheat protection heat insulation, pensky-martens closed cup apparatus standard compliance: astm d93 / is 1448 (part 21) type: pensky-martens closed cup (motorized, digital type preferred) test cup: brass cup diameter: 50.7 50.8 mm capacity: minimum 70 ml stirring system: heater: electric heater 650 w 10% heating rate: 1 12 c/min adjustableignition:pilot flame with automatic shutter mechanismtemperature measurement:thermometer or digital sensor (ip-28c or astm)digital temperature displaypower supply:230v ac, 50 hzsafety: over-temperature cut-off flame safety control

CTN :45697897

10 Jul, 2026 NA

Jammu - Jammu And Kashmir

Tender For supply of c type fast charging cable 60 w , usb adaptor 25w , hdmi to micro hdmi cable 1.5 m , electronic spices jumper wire cable multicolor , usb to c card reader , rob craze mq-2 gas senosor module 5v , esp32 nsr8 development board module , rylr498 lora anteena , temperature sensor module , flame fire detection sensor module , digital temperature sensor module for ardunio

Central Government/Public Sector

CTN :45376467

09 Jul, 2026 30.00 Lacs

Bikaner - Rajasthan

Tender For corrigendum : repair and comprehensive maintenance of swimming pool plant and equipments fire fighting system at af stn nal under ge (af) nal - comprehensive annual maintenance of swimming pool comprises of the following equipments complete all as specified and directed.(a) pumping sets of capacity 3.5 hp - 05 nos (01 as standby) (b) pressure filter of filtering capacity 50 cum/hr - 04 nos (01 as standby)(c) dosing pump - 02 nos (one for chlorination and one for soda ash)(d) electrical panel board consisting of starters of suitable rating complete.note: rate quoted by the contractor shall deemed to be included for the following :-(i) contractor shall provide trained technician and a helper, who will visit swimming pool once in a week, to check and servicing of the equipments above to ensure the serviceability and proper functioning of swimming pool.(ii) grease and lubricating oil shall be provided by the contractor at his own end and nothing extra shall be payable on this account. (iii) cleaning all swimming pool building inside, plant room, equipments including surrounding area of the buildings. (iv) check serviceability of all self priming recirculation pump of single stage / horizontal self priming pump set of 3.5hp / 3.26 kw capacity and all other connected items., comprehensive annual maintenance of fire fighting system in sekhon hall , new tech flight, sre and new atc of the following equipments complete all as specified and directed.(a) main fire pump with centrifugal motor of existing capacity- 04 nos (b) jockey fire pump with electric motor of existing capacity - 04 nos (c) makeup fire pump- 04 nos(d) dg fire pump with engine - 04 nos note: rate quoted by the contractor shall deemed to be included for the following :-(i) contractor shall provide trained technician and a helper, who will visit fire fighting installation in sekhon hall , new tech flight and new atc once in a week, to check and servicing of the equipments above to ensure the serviceability and proper functioning of installation.(ii) grease and lubricating oil shall be provided by the contractor at his own end and nothing extra shall be payable on this account.(iii) cleaning all fire fighting installation buildings (sekhon hall , new tech flight and new atc) inside, plant room,equipments including surrounding area of the building. (iv) check serviceability of all self priming recirculation pump of single stage / horizontal self priming pump set of all existing capacity and all other connected items., s&f in repair pressure pump limit switch of capacity 1psi to 4 psi and 230 volt as per existing make and model fixed on pressure booster line complete all as specified and directed., supply, installation, testing and commissioning in repair of detectors complying with and type certified to en-45 addressable type multi sensor detector with heat and smoke combination with base with self built intelligence as per is:11360 (for annexes) complete all as specified and directed., supply, installation, testing and commissioning in repair of addressable manual call point / pill station resettable type with base complete all as specified and directed, supply, installation, testing and commissioning in repair of fire alarm sounder/siren electronic type horizontal single stage continuous type normal operation for atleast 50 minutes with sound level 65 db to 120 db measured at 1.5 mtr with sound output variation +5 db 500 mtr complete all as specified and directed, supply and fixing in repair addressable monitor module for activating the sirens complete all as specified and directed, taking out old unserviceable hose box by cutting and welding and s&f hose box made of 18 gauge ms sheet 800mmx 600 mm x 250 mm with double door with 4 mm thick glasses and door frame made of 16 gauge ms sheet for keeping 2 nos hose pipe of length 15 mtr each branch pipe nozzle coupling etc and painted fire red out side and brilliant white inside yard complete all as specified and dire

Alarm Monitoring Machine Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector