Latest alarm switch Tenders | Government alarm switch Tenders

Central Government/Public Sector

CTN :45436510

21 Jul, 2026 NA

Delhi - Delhi

Tender For manufacturing & supply of complete assembly of 1 in 12 bg (1673mm) 60e1 turnout to rdso drg. no. t-8779 (alt. 03) with 10125mm curved switch to rdso drg. no. t-8780 (alt. 04) with 60e1a1 thick web tongue rails for 60e1 rail of r260 grade rail on psc sleepers conforming to specification t-10-2025 along with weldable cms corissing to rdso drg. no. t-8781 (alt. 03) conforming to specification irs t-29 (revised 2024) & t-10-2025 including all fittings & check rails mentioned in above drawing no.'s. (list of all components are explained in annexure b). (the alteration in drawing and specification issued by rdso up to one month prior to tender opening date shall be applicable). note:i. one additional set of all the components mentioned in annexure b shall be supplied with each lot of 10 sets of complete assembly. ii. contracts/supply orders will be issued for quantities in the multiple of 10 sets only. [ warranty period: 180 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45422999

24 Jun, 2026 NA

Ahmedabad - Gujarat

Tender For supply of low water cut off max. working pressure 3.52 kgf/cm square equipped with snap action switch n.o=n.c rating 75vdc full load 5 a, as per part no. 12315175 ( low water alarm switch). make-hemco, kepco, bhel. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45421952

01 Jul, 2026 NA

Mumbai - Maharashtra

Tender For supply of inspection gauges for 6400 mm 0.r. fan shaped switch (curved) bg for 60 kg on psc sleeper to drg. no. rdso/t-4966 for use in depot: (rdso/t- 6213). the single kit consist of 4 nos. different gauges. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45421953

01 Jul, 2026 NA

Mumbai - Maharashtra

Tender For supply of inspection gauge for 6400 mm curved switch with zu-1-60 thick-web tongue rails for 1 in 8.5 turnout b.g. (1673mm) for 60 kg (uic)/60e1 on psc sleepers to drg. no.rdso-t6280 for use in depot: (rdso/t-9002). the single kit consist of 8 nos. different gauges. [ warranty period: 30 months after the date of delivery ] ]

Central Government And Public Sector

CTN :45453632

22 Jun, 2026 NA

Bongaigaon - Assam

Tender For manufacturing and supply of of inspection gauges as per rdso drg. no.t-6213 (part) along with testing and calibration by any government approved labs or by any nabl accredited labs for 6400mm over riding fan shaped curved switch b.g for 60kg (uic)/60e1 on psc sleeper to rdso drg. no.rt-4966 one set consists of (i) end template-y at point r (ats),gauge no.1 (ii) under cutting of tongue rail foot at ats, gauge no.2 (iii) 13mm head thickness (at 1682mm from ats), gaugeno.3 (iv) 12r toe radius at ats, gauge no.6 (v) tongue rail head thickness (at 4244mm from ats),gauge no.35 [ warranty period: 30 months after the date of delivery ] ]

Central Government / Public Sector

CTN :45436300

07 Jul, 2026 NA

Multi City - Multi State

Tender For supply of turnout psc sleeper for 25t for 1 in 8.5 b.g. (1673 mm) 60 e1 with 6400 mm 60e1a1 thick web switch (curved) with r260/r350 ht grade rail with weldable cms crossing (drawing and item details as mentioned in set documents are applicable) drw: (rdso) rdso/t-9841, alt.01 spec: (rdso) irs t 45 4th rev march 2021 with corrigendum 1 2 set doc: set document for rt_9841 [ warranty period: 60 months after the date of delivery ] ]

Corporations And Associations And Others

CTN :45328794

11 Jun, 2026 19.95 Lacs

Delhi - Delhi

Tender For corrigendum : providing t and p items and garden tools for ward no. 171 (cr park) south zone - providing t & p items and garden tools for ward no. 171 (cr park) south zone., supply of telescopic pole pruner:-specification:-pole length including blade: 6.5mblade material: hardened & tempered high carbon steel. the head of the blade shall have a hooked tip useful for cutting twigssaw blade shape: hooked type curved sawblade type & no of cutting teeth: tripple grounded 86 teeth blade length: 15"-16"pole type: light weight telescopic tubular aluminum alloy extendable poleno of positions for pole heightadjustment: 10 positionslocking mechanism: ergonomicvally designed two way locking mechanismtotal working length: max 219"(6623 mm), mln 103" (3103mm) branch cuttingcapacity: 200mm max, petrol operated brush cutterengine: single cylinder, 2 stroke, aircooled onlyengine displacement: 40.2ccpower output: 2kw/2.7hpmax output shaft speed at cuttingattachment: should be minimum 9000 rpmcarburetor: diaphragm with compensator technology.fuel tank capacity: minimum 600 ml.weight(dry, without cutting attachment & deflector): should not be more than 7.5 kgclutch: centrifugal type, clutch shoe support base & lining metal only.multi function handle: should have acceleration, on/off switch at right handle.brushcutter harness: should be double shoulder harness only.anti vibration system: must have 4- point aniti vibration system.vibration level in m/s2 at right handle: should not be more than 2.5 m/s2sound pressure level db(a): should not be more than 105 db(a)drive shaft design: must have drive shaft ends square design type only.certification: must have valid en certification, telescopic petrol operatedpole prunerengine: single cylinder, 2 stroke, air cooled onlydisplacement: should be between 25-30 ccpower output: should be minimum 1.2 hpweight (dry without cutting attachment & fuel): should not be more than 7.5 kgfuel tank capacity (ml): should be minimum 400mlchain oil capacity (ml): must have minimum 200 ml.clutch: clutch shoe linining should be metal only.guide bar length: minimum 30cmguide bar and chain: should have same manufacture onlychain type: every drive link need groove & small oil holes for better lubrication. saw chain pitch should be 1/4" or 3/8picco only and drive link thickness must have 1.1 mm or 1,3 mm.max. output shaft speed (rpm): should be minimum 8000 rpm at chain sprocket.equipment total length with guide bar and chain (cm): should be minimum 220 cm - compressed & total length of equipment -minimum 350 cm - extended.sound pressure level (db/a): should not be more than 95 db(a)vibration measurement m/s2 at control handle extended position: should not be more than 5.5 m/s2certification: must have tuv certification with test standard en iso 11680, supply of lawn mower:-specification:- type of machine walk behind lawn mowers power sourcepetrol engine engine displacement 224ccstart type recoil / pull startspeed control variable speeddrive type all wheel driveblade style rotary typeblade engagement electromagneticcut width (mm) 525 to 549minimum cut height 20 millimetermaximum cut height 80 millimeterblades hardened steelnumber of blades 1number of positions for cut height adjustment 6number of levers for cut heightadjustment: single levernumber of wheels 4front wheel size 203 millimeterrear wheel size 250 millimeterwheel tyres pneumaticif yes, grass catcher / collector / bag volume 70 liter"engine power rating (watt)" 4000 to 4999engine fuel tank capacity 1.4 ltr., supply of synthetic enamel paint in all shades as per required and direction of officer-in-charge., petrol operated chain sawengine : single cylinder, 2stroke, aircooled onlydisplacement: 45.4cc poweroutput: 2.3kw. 3.0 hpmax. engine speed (with guide bar & chain): at least 12500 rpmcarburetor: diaphragm type compensator technology.fuel tank capacity: should be minimum 450 ml.dry weight(without cutting attachment):should not be mor

CTN :45421988

18 Jun, 2026 NA

Kharagpur - West Bengal

Tender For manufacturing and supply of complete set of inspection gauges for 10125mm o.r. thick web curved switches b.g. for 1 in 12 60 kg drg. no. rdso/t-6155 (uic)on psc sleeper for use in depot . one set consist of : (1) end template at actual toe of switch, - gauge no. 1 (2) head width checking gauge at 2678mm from ats , - gauge no.2,(22mm head thickness) gauge-2a & 2b(3) head width checking combined gauge at 2678mm - gauge no. 2/1,from ats (22 mm head thickness),(4) head width checking combined gauge at 4958mm - gauge no. 3,from ats (55 mm head thickness) gauge- 3a & 3b (5) head width checking combined gauge at 4958mm - gauge no. 3/1,from ats (55 mm head thickness) make : alliance or similar. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45431589

11 Jun, 2026 NA

Rajkot - Gujarat

Tender For auction sale of depot ferrous scrap - old used and u/s ms chair plate sliding, chair plate attached with erc and fittings or w/o erc and fittings, ms plate, acb plates, fitting of curved switch 52 kg 1:12, 1:8.5, fittings of derailing switch 52 kg, stracher bars, protecting plate, bearing plate, some clamps etc pway items ms joggle fish plate, guage tie plate, mg fish plate, ms sej bracket, offsize fish plate and glued fish plate, offsize glued meter plate, offsize meter patti, offsize junction fishplate, (above items have some attached fittings) (location b/w godown no. 4&5) delivery- by weight

Central Government/Public Sector

CTN :45431597

11 Jun, 2026 NA

Rajkot - Gujarat

Tender For auction sale of depot ferrous scrap - old used and u/s ms chair plate sliding, chair plate attached with erc and fittings or w/o erc and fittings, ms plate, acb plates, fitting of curved switch 52 kg 1:12, 1:8.5, fittings of derailing switch 52 kg, stracher bars, protecting plate, bearing plate, some clamps etc pway items ms joggle fish plate, guage tie plate, mg fish plate, offsize fish plate and glued fish plate, offsize glued meter plate, offsize meter patti, offsize junction fishplate. (above items have some attached fittings) (location b/w godown no. 5 & 6) delivery- by weight

Alarm Switch Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors