Latest alarm unit Tenders | Government alarm unit Tenders

Central Government/Public Sector

CTN :43532425

24 Jan, 2026 NA

Multi City - Multi State

Tender For supply of water level sensor pressure transducer type of part no. fgiptwlsxxxxxx01 make a. paul. [ warranty period: 30 months after the date of delivery ]

CTN :43532006

12 Jan, 2026 NA

Multi City - Multi State

Tender For supply of shunt safe device(unit) working with 12 volt rechargeable lithium ion battery with alarm, battery indication & water proof cover of box with battery overcharging auto cut & battery charging led indicator. 1. the unit should be an audio visible alarm unit to be used by the shunting staff for their own safety during shunting operations.2. the unit should be made of at least 1.2 mm thick ms sheet duly powder epoxy coasted.3. the visible indication is to be provided with the help of a matrix of blue led?s of 5 mm diameter. the front size matrix should be having 4 rows and 4 columns and the matrices on either side should have 1 column of 4 led?s each. the leds should be flashing with one second off and one second on times. the side led?s should be located at an angle of 32 to 35 degrees from the front matrix, with the objective is to disperse the light in the front, as well as on the two sides.4. the audio alarm should comprise of a loud speaker of such intensity as to be audible from a distance of at least 75 meters in a noisy environment. nominal audio power output of the unit should be 10 watt, which should be provided by the means of the sturdy horn type loud speaker. the horn should be protected with the help of ms bracket of suitable size duly powder coated. the sound is to be intermittent to be decided in consultation with railways.5. the unit should be provided with a battery backup of at least 4 to 5 hours.6. battery 12 v 4.5 ah lithium ?ion battery.7. the unit shall be usable in all weather conditions in open areas. the design should be rainwater proof.8. there should be hook for hanging the device with the coach/wagon. the hook should have a diameter of 2.5 inches and it should be possible to rotate the hook in any direction. hook should be strong enough to sustain the regular used of the unit.9. rubber lining or any other type of shock absorbers should be provided at the bottom and the back side.10. the unit should be provided with a suitable and sturdy on off switch, so located that it is not operated accidentally. a jack plug in arrangement should be provided to facilitate the changing of battery with an external charger.11. the led?s should be protected with the help of an acrylic sheet.12. battery on charge indication should be provided at suitable location.13. external smps charger to be provided for charging batteries. [ warranty period: 30 months after the date of delivery ]

CTN :43520195

19 Jan, 2026 NA

Parganas - West Bengal

Tender For supply of nylon disc filter pad assembly with aluminum tubes/plates for 1473 cap: 100lpm make: universal precisi , spare nylon disc for 1473 cap: 100lpm make: universal precision tools , spare filter pad element for 1473 cap: 100lpm make: universal precision tools , oil level indicator high/low level proximity sensor, 200mm for 1473 cap: 100lpm make: universal precisi

CTN :43519489

19 Jan, 2026 NA

Uttara Kannada - Karnataka

Tender For supply of repair and refurbishment of sewage tank high level sensor

CTN :43521859

30 Jan, 2026 NA

Multi City - Multi State

Tender For supply of x3-mast-17m-02-538-10-0 exhaust silencer with ss joint exhaust p , x2-misc-lorros-03-240-03-0-00 cutting plier type 1121 , x2-misc-lorros-03-240-02-0 hammer ball pane 500 gm with handle , x3-mast-17m-03-240-11-0 nose plier with insulated handle 200mm l , x2-misc- lorros-03-220-17-0 nylon pvc pipe 5 mtr , x2-misc- lorros-03-915-11-0 battery cable assy positive and negative , x3-mast-17m-6h-431-08-000 spnr de 16x17mm , x3-mast-17m-6h-431-06-0-00 spnr de 12x13mm , x2- misc-lorros-03-286-01-0 fuel tank assy with fuel level sensor e , x3-mast-17m-04-250-01-000 v belt a x 43 raw edge cogged lp 1131 h , x3-mast-17m-34-032-02-000 pre filter element , z1-misc-2056-92146-00 pcb led pannel assy , z3-5825-091417 detector log video amp , z6-2540- 002192 box storage vehicular accessories , x3-mg-19- dynaf-8-47-008-07 bearing rod end

Central Government / Public Sector

CTN :43502224

22 Jan, 2026 NA

Sultanpur - Uttar Pradesh

Tender For supply of oil temperature sensor , water pump assembly , oil seal flywheel side , oil seal , water level sensor , oil pressure sensor , pigtail harness , piston gudgeon pin clip , engine cylinder liner , connecting rod bearing , oil ring viton , cylinder head cover gasket , copper bush , disc washer , o ring viton , copper washer , engine wiring harness , canopy wiring harness , high pressure fuel pipe , high pressure pipe , flexible fuel pipe , o ring set , gasket set , flexible fuel pipe set , hose set , hose clip set , radiator coolant , inlet valve , exhaust valve insert , inlet valve insert , valve cone outlet , valve collet , valve spring outer , valve spring inner , valve guide , valve spring cap , injector sleeve , brass cap , injector stud bolt , lubricating oil pump , lube oil filter element , fuel filter pre , fuel filter micro , lubricating oil , lubricating oil ci 4 , air filter outer element , air filter inner element , battery , toh charges , freight charge , cylinder head calibration , fip calibration , injector calibration , turbo calibration ) /bid number : gem/2026/b/7084334 * /dated: 08-01-2026 & & / bid document 1 / 59

Central Government / Public Sector

CTN :43501981

19 Jan, 2026 NA

Bongaigaon - Assam

Tender For supply of fuel bath cover , humidity probe , main rtd temperature probe , ball holder assembly , water level sensor assembly , hfrr pushrod insert , solenoid valve , hfrr standard specimen pack , o rings for arm lifter , flow meter mass flow control , main shaft replacement coupling

State Government

CTN :43473705

28 Jan, 2026 NA

Kheda - Gujarat

Tender For supply of smps, temp. controller, limit switches, etc. items for unit-8 wanakbori tps. - power supply module, input ac : 85-264 v, output dc: 24v dc, 5a, model : pro eco 120w 24v 5a, make : weidmuller, power supply , input ac : 85-264, output dc: 24v dc, 10a , weidmuller pro eco 240w, power supply unit 24v dc,20a, 10 amp smps, part no-spb 240-24 for hpp plc, switch mode power supply power compact-3ac/24vdc-10,order.no.: pc-0324-100-0,input:ac 400-500v / 0.73-0.66a/50-60hz input range:ac 320-575v/dc 450-800v output: dc 24v / 10a,amb. temp.: -25*c.+70*c derating: -2.5 percentage / k>55*c make: block, dryer-smps-s8fs-co5024j, item code : 930ea0019r00, input-50/60 hz,100-240vac 1.2a,out24vdc 2.2a, summit make dryer model si 12k dw, switched mode power supply unit 230 vac / 24 vdc, 10a, power supply,phoenix contact,o/p 24v dc,10a,order no2866378,24dc/24dc/10, phoenix make24 v dc power supply,20 amp for primary i/o bank, temperature controller, make- radix, model- nex 205, jaibalaji control gears pvt.ltd.make limit switch model:cee em 45,45 - 56 contact:1no+2 nc contact rating:415v 50hz 1.5a,ac15/dc13 thermal current(ith):10a@240v ac/30v dc impulse voltage:1.5kv ip rating:ip 67 application:wt wagon on table., jai balaji bc9 limitswitch jlsl-1 ip-67 same polarity 2no+2nc 415v 50hz 1.5a ac15/dc13 thermal current(ith):-10a,240vac/30vdc rated impulse voltage:-1.5kv, bc- 9 oil tight limit switch, type: jlsl- 2 (1no+1nc) rollerlever 76.2 mm long with 19 mm dia. 8mm wide metal roller jai balaji make, jai balaji make roller (adjustable) lever operated (oil tight) limit switch, type: jlsl a (spring return) 1no+nc contact, length of lever: adjustable lever (32mm to 82.5mm) metal roller: 19mm x 8mm ac11 rating: 6a, 110v, ip-67, limit switch 1.5a/440v, nll1 for vfd of id fans . bhel code-cn9072529022, liquid level controller with 3 electrodes, model : wlc d1, supply voltage : 90 to 270v ac, 3 electrode input sensor, o/p contact : 1 co, din rail mount , make : minilec, diode oring unit, 24vdc, 5a, na-doms 5-24@a, p/n : 4012boi01373, make : geip/emerson std, diode oring unit, 24vdc, 5a, na-doms 10-24@a, p/n : 4012boi01374, make : geip/emerson std, diode o ring module, 20a, 24v dc