Latest alizarine Tenders | Government alizarine Tenders

Central Government/Public Sector

CTN :45652396

02 Jul, 2026 NA

Kapurthala - Punjab

Tender For supply of set of welded partition frame for non ac bangladesh coach. note: make/manufacturer of raw material shall be m/s jsl or m/s sail., as per drawing: mp25parnabang version 3, packing instruction: `packing condition of set of partition frame and procedure to achieve best possible protection during transportation: 1. surface preparation: - thoroughly clean the components to remove any dirt, grease or contaminants - apply a protective film, such as pvc or laser film or bubble sheet, to shield surfaces from scratches and environmental factor. 2. packing materials: - wooden crates: construct sturdy wooden cage tailored to the component's dimensions. - steel strapping: utilize rust-proof steel straps to securely bundle components, preventing movement during transit. 3. moisture barrier: - incorporate moisture-proof materials, such as plastic film or water proof ability paper, to guard against corrosion. 4. component arrangement: - place components on wooden pallets or within custom-designed supports to distribute weight evenly and prevent deformation. - ensure that no part of the component extends beyond the protective packaging to avoid exposure to potential damage. 5. securingthe components: - use steel straps or ropes to fimly anchor the components within thewooden crate, minimizing internal movement. - for added stability, employ bracing or cushioning materials, such as foam pads or corrugated inserts, to fill voids and absorbshocks. - hardware items to be suitably packed separately inside the crate. 6. labeling and documentation: - clearly label each package with essential information, including pl no. specifications, details of each set with qty. and also keep one copy inside ot the crate, weight, handling instructions and firm's & destination details. 7. loading onto trailer/lorry/truck/transport: - strategically position the packaged components within the truck/suitable to maintain balance and prevent shifting during transit. - secure the packages to the container's structure using lashing ties or additional bracing as needed. 8. final inspection and sealing: - conduct a thorough inspection to verify thatall components are securely packed and that packaging materials are intact. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45664839

03 Jul, 2026 NA

Kapurthala - Punjab

Tender For supply of set of welded partition frame for bangladesh ac chair car coaches.note: make/manufacturer of raw material shall be m/s jsl or m/s sail., as per drawing: mp25paraccbang version 2, packing instruction: `packing condition of set of partition frame and procedure to achieve best possible protection during transportation: 1. surface preparation: - thoroughly clean the components to remove any dirt, grease or contaminants - apply a protective film, such as pvc or laser film or bubble sheet, to shield surfaces from scratches and environmental factor. 2. packing materials: - wooden crates: construct sturdy wooden cage tailored to the component's dimensions. - steel strapping: utilize rust-proof steel straps to securely bundle components, preventing movement during transit. 3. moisture barrier: - incorporate moisture-proof materials, such as plasticfilm or water proof ability paper, to guard against corrosion. 4. componentarrangement: - place components on wooden pallets or within custom-designed supports to distribute weight evenly and prevent deformation. - ensure that no part of the component extends beyond the protective packaging to avoid exposure to potential damage. 5. securing the components: - use steel straps or ropes to fimly anchor the components within the wooden crate, minimizing internal movement. - for added stability, employ bracing or cushioning materials, such as foam pads or corrugated inserts, to fill voids and absorb shocks. - hardware items to be suitably packed separately inside the crate. 6. labeling and documentation: - clearly label each package with essential information, including pl no. specifications, details of each set with qty. and also keep one copy inside ot the crate, weight, handling instructions and firm's & destination details. 7. loading onto trailer/lorry/truck/transport: - strategically position the packaged components within the truck/suitable to maintain balance and prevent shifting during transit. - secure the packages to the container's structure using lashing ties or additional bracing as needed. 8. final inspection and sealing: - conduct a thorough inspection to verify that all components are securely packed and that packaging materials are intact. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45664918

06 Jul, 2026 NA

Delhi - Delhi

Tender For supply of inhibitor corrosion , coolant pre mix fleet guard complete eg 50 : 50 cil part no. 3167224 for cummins engine model vta-28-l as per drg.no. cil part no. 3167224 specn: cil part no. 3167224 [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45638111

20 Jul, 2026 NA

Kapurthala - Punjab

Tender For supply of set of partition frame for lsdd amrit bharat 3.0 ( (note- colour scheme is as per design letter no md48161 dated- 15/05/2026 ), as per drawing: mp26pfgsab3.0 version 0, packing instruction: `packing condition of set of partition frame and procedure to achieve best possible protection during transportation: 1. surface preparation: - thoroughly clean the components to remove any dirt, grease or contaminants - apply a protective film, such as pvc or laser film or bubble sheet, to shield surfaces from scratches and environmental factor. 2. packing materials: - wooden crates: construct sturdy wooden cage tailored to the component's dimensions. - steel strapping: utilize rust-proof steel straps to securely bundle components, preventing movement during transit. 3. moisture barrier: - incorporate moisture-proof materials, such as plastic film or water proof ability paper, to guard against corrosion. 4. component arrangement: - place components on wooden pallets or within custom-designed supports to distribute weight evenly and prevent deformation. - ensure that no part of the component extends beyond the protective packaging to avoid exposure to potential damage. 5. securing the components: - use steel straps or ropes to fimly anchor the components within the wooden crate, minimizing internal movement. - for added stability, employ bracing or cushioning materials, such as foam pads or corrugated inserts, to fill voids and absorb shocks. - hardware items to be suitably packed separately inside the crate. 6. labeling and documentation: - clearly label each package with essential information, including pl no. specifications, details of each set with qty. and also keep one copy inside ot the crate, weight, handling instructions and firm's & destination details. 7. loading onto trailer/lorry/truck/transport: - strategically position the packaged components within the truck/suitable to maintain balance and prevent shifting during transit. - secure the packages to the container's structure using lashing ties or additional bracing as needed.8. final inspection and sealing: - conduct a thorough inspection to verify that all components are securely packed and that packaging materials are intact. [ warranty period:30 months after the date of delivery ] ]

CTN :45332546

23 Jun, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : tender for supply of eprom mpu24/mem5-02 programmed , panel rcs-fpp/04 , corrosion inhibitor rust ban 326 , snap ring 32x1.5 din 471 , computer accessories , plug-in board , screw m10x150 , gasket , pressure gauge 0-10 bar , temperature monitor , instrument , o ring 39.2x3 , plug-in board , telephone cable , thermocouple , adjusting washer , soldering iron stand , woodruff key , o ring , actuator vlv , cylinder head with valve , paste ultra therm mtu , pressure hose , oil filter , o ring , molykote paste g-n plus , gasket liquid loctite 573 , clamp , terminal , plug in board cob9-01/a , pressure sensor , relay 24v / 4a , conversion kit f/series 4000 (5205304531) , illuminescent diode , signal lamp , mpc1-01 card f/computer a.741620/741634 , software , tool bag , module cob 8-01 , diskette , housing , temperature sensor pt100/110mm , plug-in board , male connector , speed sensor , plug-in board sab 1-03(5295308912) , coolant level sensor , flashing lamp red , plug-in board cib 3-02 , plug-in-board not adjusted , speed transmitter dm52 , pressure sensor 1600 bar/r , relay , terminal , pressure sensor , flashing light , blue , fuse fk2/6a , terminal(0055314981) , terminal strip_0045310081 , fuse 2a fk2 , pressure sensor , switch , terminal block , pressure sensor 6 bar(sw) , fuel filter primary(lcm) , plug , w/p repair kit , relay , printer , thermal actuator , plug in board dfc 2-01 , display unlabelled , connection interface for monitoring , cable for monitor system , switch , loctite nr 510 surface sealant , plug , union , bolt m20 1.50x103.0 lg 18 conrod , switch , plate guard g73 , switch , bushing , bushing , modular system , led , conn fuel rail rear , diode m.kuelkoerp , plug in board mpu 30-02 , track-ball , cable , plug-in board , cover , automatic cutout , multi led 5 5k blue , plug in board , male connector , control lever ros 2 03 , fuse , control lever , o-ring , plug - in board , nut , sealing ring , keyboard english , terminal , wiring harness to injector , mpc 1 01 card f computer , silcone rubber loctite 5970 , compensating washer , plug-in board , switch , washer , shaft wtr pmp hi temp clg circuit , guide ring , valve keeper wedge , plug-in board , plate , flow restrictor , plug-in-board , plug in board , filter element , adaptor , modular system , plug-in board rob1-01 a , inb 1 , trackball , plug-in board , plug in board aib2-03 , aib 1 , plug-in board , plug-in-board , roller tappet , con rod bearing size 0-0 , pressure sensor , plug-in board , sealing ring , plug in board , bellows , transition socket , sleeve rubber , grommet , ring sealing a12x15.5 , hex nut , straight connector , rocker shaft , techometer , computer hard disc 2.5 60gb not adjuste , screw , eprom mem5 mcupps cps adjusted , audiable alarm , adaptor 10 6 n 15007 , plug , pressure spring , o ring , benjo screw , washer , o ring , plug in board , plugin board , washer , grommet , o ring , plug , drain valve , plug-in-board not adjusted , piston ring , washer , o ring , rtv , cover , split pin , level monitor bediaplca , terminal strip , contact block , module mcs 5 pim3 , oil seal high temp cirt pump , panel , repair kit , starter , bearing bushing , seal ring , circlip , seal ring , ring asm , contam indicator , fuel filter , pressure sensor , plug-in board

CTN :45416480

02 Jul, 2026 20.00 Lacs

Rohtak - Haryana

Tender For rate contract for two years (extendable) for purchase of m and e items for use in gas mani fold- bpc flow meter with humidifier bottle:, providing of bpc flow meter (polycarbon 0-15 ltr. capacity/min) and 250 ml humidifier bottle with bs type oxygen probe for existing outlets complete etc. as required at site., humidifier bottle:, humidifier bottle should be compatible with oxygen flow meter and it should be reusable type. the bottle should be shatter proof and made of polypropylene. metal component of humidifier bottle should make of brass with anti- corrosion nickel plating., trolley for b type cylinder:, trolley with load capacity of one oxygen b type cylinder. made up of mild steel & frame work made of crc tube. surface finishing should be powder coated. trolley with 02 no. of wheels., nrv for manifold:, providing & fixing of manifold non return valve is specially made of solid brass body, 100% flow return guard. facilitates changing of empty cylinders plus helps in preventing the back flow of the gases. high pressure non- return valve - 230 bar (3330 psi), 2nd fix for ohio/heal rom type oxygen/air/nitrous/vacuum outlet:, a gas specific back body with steel mounting plate. compatible for existing outlet., probe for ohio/heal rom type oxygen/air/nitrous/vacuum outlet:, probe made with stainless steel matching with existing outlet point. indigenous and ce certified., probe for pb type oxygen/n2o/vacuum/air outlet:, probe made with stainless steel matching with existing outlet point. indigenous and ce certified., star for 2nd fix of pb type oxygen/n2o/vacuum/air outlet, spring for 2 fix of pb type oxygen/n2o/vacuum/air outlet, nrv for ohio/heal rom type oxygen/air/nitrous/vacuum outlet point:, providing & fixing of non return valve is specially made of solid brass body, 100% flow return guard., o' ring set for penlon/ beconmedas type oxygen/air/nitrous/vacuum outlet point, ward vacuum unit with 2000ml jar & regulator:, consists of one no. vacuum regulator with on/off knob, collection jar of capacity 2000 ml made of unbreakable which is polycarbonate/plastic auto clavable up to 134 deg. c. a bracket is also provided regulation range from 0-760mm hg. the vacuum unit should include regulator along with 0-760mm of hg vacuum gauge of 2" size dial. 2000ml capacity reusable plastic collection bottle with overflow safety trap with plastic slide wall mounted type., ward vacuum unit with 600ml jar & regulator:, consists of one no. vacuum regulator with on/off knob, collection jar of capacity 600 ml made of unbreakable which is polycarbonate/plastic autoclavable up to 134 deg. c. a bracket is also provided regulation range from 0-760mm hg. the vacuum unit should include regulator along with 0-760mm of hg vacuum gauge of 2" size dial. 600ml capacity reusable plastic collection bottle with overflow safety trap with plastic slide wall mounted type., vacuum regulator:, the vacuum regulator with on/off knob along with range from 0-760mm hg &vacuum gauge of 2" size dial., gasket for 600 ml. of ward vacuum unit, gasket for 2000 ml. of ward vacuum unit, mounting bracket for ward vacuum unit (plastic):, a bracket is also provided regulation range from 0-760mm hg., ohio hill rom outlet sheet, ohio/ hill rom outlet o'ring set, pb type outlet sheet, pressure gauge(o₂/n₂o/air):, providing & fixing of pressure gauge (pressure range- 100 to 400 kg/cm2) material- stainless steel body, size- 4 inch & pressure (0 bar to 7 bar), high pressure tube(hard type):, non toxic. medical grade pvc material finish. transparent high pressure tube options are clear in contraction as well as smooth in usage., low pressure tubing:, non toxic, medical grade pvc material finish. transparent low pressure tube options are clear in contraction as well as smooth in usage., lock for ohio/hill rom outlet point, nrv washer for ohio/ hill rom outlet point

CTN :45405513

17 Jul, 2026 NA

Gorakhpur - Uttar Pradesh

Tender For supply of led based head light as per rdso spec no. rdso/2017/ el/spec/0134, rev 04 issudon 9.10.2025 or latest for three phase lomotives. note:1) bird guard to be provided on headlig ht glass to prevent breakage of glass due to bird hit.2) die cast aluminium body to be provided for he adlight for long life and prevention of corrosion. [ warranty period: 30 months after the date of delivery ] ]

Central Government And Public Sector

CTN :45390027

23 Jun, 2026 NA

Nagpur - Maharashtra

Tender For replacement of corrosion guard and corroded/perforated chequered plate by new ss chequered plate in bridge no. 348 up & mid ,116 up & dn, 34 up & dn, 68 159 and 270 under the jurisdiction of sse/bridge/gondia in nagpur division.

Central Government/Public Sector

CTN :45405669

29 Jun, 2026 NA

Gandhidham - Gujarat

Tender For supply of inhibitor corrosion in 205 ltrs. barrel compleat eg 50:50 premix coolant suitable for cummins 500 kva diesel engine fitted in lhb power car ktaa-19-g10. make - cummins part no. 3816981 or fleet-guard part no. cco2774. [ warranty period: 30 months after the date of delivery ] ]

Central Government And Public Sector

CTN :44959330

01 Jun, 2026 NA

Nagpur - Maharashtra

Tender For corrigendum : inhibitor corrosion, part no. 3816981. fleet guard part no cc2774. size 205 litres complete eg 50:50 premix. make: cummins, fleetguard, and donaldson. warranty: nine months from the date of supply. [ warranty period: 9 months after the date of delivery ]

Alizarine Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector

Central Government/Public Sector

Central Government And Public Sector