Web Analytics Made Easy - StatCounter

Alluminium Section Tenders

Get complete information related to latest Alluminium Section Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Alluminium Section Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Alluminium Section Tenders .

Filter
Loading....
Loading....
Loading....
Loading....
Loading....

Bid Submission Date Range
Tender Value

State Government

CTN :41195316 Due date: 08 Aug, 202508 Aug, 2025 2.45 Crore
Tender For supply of demolition of brick work and stone masonry , dismentaling tiled of stone , dismentling doors, windows, ventilators etc , removing and scraping of old deteriorated plaster of any thickness , dismentaling aluminium gypsum partition, door, window, and fixed glazing and false ceiling , dismantling santtary fittings , brick work , providing and fixing g.i. hexagonal chickenmesh , providing 15mm thick cement plaster , glass door with aluminium frame corner , flush door with wpc frame , flush door , standared extruded of alluminium section , applying two coats of putty and two coats of primer , plastic emultion paint , vitrified flooring , complete carpet system with the manufacturers approved adhesive , kota stone slab , grid ceiling , plain gypsum board frmr grade ceiling , armstrong wooden grid ceiling , chair type 01 main chair , chair type 02 chair , accoustic panelling , training room chair , custom made furniture , ply wall paneling finish with veneer finish , ply palmet work , frosted sparkling glass film , cement sheet , low height storage , full height storage , urinal partition , plumbing fixture , screw down bib taps , white glazed vitreous china wall mounting type european type water closet , washbasin with single hole for pillar tap , c.p. brass waste for washbasin or sink. a 32mmdia. , providing and fixing urinal , chromium plated, bottle trap , chromium plated brass half trun flush cock , kitchen sink , rubber plug for sink or wash basin. , m.i. fisher union for washbasin , c.p. brass towel rail comlete , toilet paper holder , pillar tap , bevelled edge mirrror , signages , wall mounted customised ss fonts signages , art work , roller blind , digital clock , stainless steel dustbin , square pedal bin 10x15 stainless steel dustbin , s.s finish pot , artificial plant , electrical work , secondary light points , one light point , bell point , 6a socket with one 6a switch , ) /bid number : gem/2025/b/6490197 * /dated: 24-07-2025 & & / bid document 1 / 83 & & ' ' /item category 16a socket with one 16a switch , one fan point , 20a - 6 pin switch 20 amp indicator switch socket for ac , flexible copper frls cable , providing and erecting switch board , supply and laying of pvc medium duty conduits , t.v. socket with back box, harware etc. , telephone socket with back box, harware etc. , rj 45 data point socket with back box,harware etc. , cat-6 t with cable with requrie harware and accessories etc. , tv rg-6 cable with requrie harware and accessories etc. , 4 way splitter with wall mount boxes,harware etc. , rg-11 cable to be laid with pvc condiut ,pull boxes,harware etc. , 3phase and 1 phase distribtuion box , medium voltage cable end termination , 4c x 6 sq. mm al xlpe armoured cable , 4c x 10 sq. mm al xlpe armoured cable , 3.5 c x 120 sq. mm al xlpe armoured cable , cable end termination and connection , 4c x 10 sq. mm al-cu xlpe armoured cable , light fixtures fans , high speed 50 watt ceiling fan with double , exhaust fan , removing all electrical material , cctv camera , dome camera , nvr , hard disk , network switch , network rack , 65 uhd led display for cctv , conduits and pipes , 8 modem jack for computer open rj-45 cat-iii , lan cable , network switch , fire alarm system , fault isolator , photothermal detector , thermal detector , fire survival armoured cable , fire alarm panel , av is to controller , chairman unit microphone with flexible stem , delegate unit microphone wit flexible stem , multicore conference cable , ceiling or wall mount speaker , power amplifier , digital signal processor , speaker cable , presentation point -pop up box , main led display size , usb camera for soft vc , multi format presentation switcher , multiformat active table plate transmitter , hdmi receiver , lan switch , hdmi - hdmi cable , 4-pair cat5e shielded twisted pair stp cable , usb , usb hub , equipment rack , cassette type split air- , split ac machine , ms angle

CTN :39964740 Due date: 01 Aug, 202501 Aug, 2025 NA
Tender For bid to ras supply of excavating over areas exc 1 point 5 m deep and , excavating over areas exc 1 point 5 m deep , ml for moorum red bajri filling in , ml for hard core of broken stone and , ml for cement concrete type d , ml for rcc m25 as in foundations , ml for rcc m25 as beams cantilevers , ml for rcc m30 as in foundations incl , ml for rcc m30 walls , ml for rcc m25 as in columns pillars piers , m l for tmt bars 10 mm dia , ml for formwork to sides of concrete , ml for formwork to faces of walls , ml for formwork to sides of pillars , ml for formwork to sides and , ml brick work with sub class brick , ml for damp proof course to h , m l for rendering 10 mm thick on fair faces o , m l for rendering 15mm thick on fair faces of , m l for preparation of new wall surfaces and , preperation of new plastered surfaces a , ml for 75 mm thick pcc , sf gl frame work for seamless ceiling , ml for hangers 6 mm dia , ml for providing and fixing , sf roof trusses framed , sf plates plain or chequered , ml for mild steel screw bolts , sf prepainted galvalume aluminum z , sf prepainted galvalume aluminum , m l for applying two coats of synthetic , ml for steel rolling shutters with out ball , removing excavated material n exc 50m and , ml for framed work as in doors or gates of a , sf wire netting of galvanised steel wire , sg gate valve 50 mm dia , sf 50 mm dia tubes med grade , material and labour for point , one 3 pin socket outlet 5 amps on , one 3 pin socket outlet 5 amps , material and labour for point wiring , material and labour for switch piano , material and labour for socket outlet , all as per serial item no 11 here in , material and labour for ceiling rose , supply and fix led flood light 35 36 37 w , supply and fixing sheet metal enclosure , supply and fixing mcb single pole 6 to 3 , supply and fixing mcb spn 50 to 63 am , material and labour for earthing , supply fix air circulator fans 230v , m l for bore well of depth 60 mtr , supply installation testing and , supply and fix foot valve , supply and fix sluice valves of 40 mm bore , supply laying and testing , double scull 2x , quadruple scull 4x equipment to , scull oars equipment to be , sweep oars equipment to , speed coach , heart rate watch , display led screen 10x8 , digital camera , mirror with aluminum frame with , stop watch , wall fan heavy duty , indoor rowing machine equipment , single scull 1x equipment to be bid details/ 2 / 53

State Government

CTN :41192318 Due date: 12 Aug, 202512 Aug, 2025 3.50 Lacs
Tender For suply of iti item - basic electrical er. book scvt, work shop calulation & science electrical book scvt, work shop calulation & science mechenical book scvt, basic er. drwaing electrical book, basic er. drwaing mecheical book, employer ability skill book, carpainter trade theory book, wire man trade theory book, tracter mechenic trade theory book, fan regulator, aluminum wire 6mm isi mark, aluminum wire 8 mm isi mark, pander holder, casin patti pvc 1 inch, casin patti pvc 1.5 inch, copper wire isi mark celeve insulation, warnish, cotton tap, cilive no. 1 to 7, steel screw 16 by 4, wood polish warnish, copper wire 1.5 mm, copper wire 2.5mm, flaxible wire 25/36, soldring wire, soldring flux, tap isi mark, cotton weste, engine oil crb, drill machine chakkra 5 inch sut with key, lawan remover bush cutter machine carben brush, grinder wheel ( smoth wheel ), oil filter isi mark, disel filter, touch wood polish, wiper, plastic grip, polish, brush kalam, butten holder, fan regulator resistance, bell push switch, ciling rose, angle holder, water colour camel, bombay kill(nail)3 inch, biranji 3 by 4 inch, drill burma, keel 1 inch 2 inch 3 inch, fevicol, sent paper rezmal 0 to 60 no., roll paper 80 no isi, laboratry ovum ilament 500 watt, drill machine 13mm armecher carbon brush, lakdi beat 6 mm to 12 mm, grinder patte 36 40 60 80 no., grinder dick, cutter machine patta 5 inch, grinder patte loha ghisne ka, circuler saw machine cutter 08 inch, circuler saw machine rande ki blade 13 inch, ply 18 mm 4 by 8 isi, ply 12 mm 4 by 8 isi, pipe 2 inch 20 feet long, angle 2 inch 10 ft long, door mate, thinner, prakar, drawing copy, practical copy, cane chair, jangal lakadi satkata babul neem etc, sanmica 4x8, fan bearing 6201/6202, pvc paper 5, 7 no, fan condenser 2.5 mfd, welding electrodes size 2.90 by 3.50mm, tractor fuel pipe line all size, v belt machine all size, nut bolt all size, machin screw all size, half treat steel screw all size

State Government

CTN :41208620 Due date: 04 Aug, 202504 Aug, 2025 5.04 Lacs
Tender For special repair to city civil and sessions court, bhadra, ahmedabad. (constructing mediation centre chambers at room no. 627 at 6th floor and other places-alluminium section office partition work, flooring work and other miscellaneous works) (2nd attempt)

CTN :41228018 Due date: 04 Aug, 202504 Aug, 2025 11.68 Lacs
Tender For providing electrical supply to newly installed acs in various class of govt. model senior secondary school, school-16-d,chandigarh. - dsr item no. 2.10 supplying and fixing 5 a to 32 a rating, 240/415 v, 10 ka, "c" curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required., single pole, triple pole, dsr item no.2.5 supplying and fixing of following ways surface/ recess mounting, vertical type, 415 v, tpn mcb distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 a tinned copper bus bar, common neutral link, earth bar, din bar for mounting mcbs (but without mcbs and incomer) as required (note: vertical type mcb tpdb is normally used where 3 phase outlets are required)., 4 way (4 + 12) double door, dsr item no.14.16 supplying and laying of following size dwc hdpe pipe isi marked along with all accessories like socket, bend, couplers etc. conforming to is 14930, part ii complete with fitting and cutting, jointing etc. direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required., 160 mm dia (od-160 mm & id-135 mm nominal), providing and fixing following rating mccb 4 pole 415 volt (thermal magnetic / microprocessor release) without ms enclosure for over load and short circuit protection, 36-55 ka breaking capacity (ics=100% icu) with positive isolation. (as per complete item no. 4 of the dnit)., 100 amp 4 pole 36 ka mccb (thermal magnetic release)., 250 amp 4 pole 36 ka mccb (thermal magnetic release)., 400 amp 4 pole 50/ 55 ka mccb (microprocessor release) with lsig protection., supply and laying of xlpe insulated pvc sheathed aluminium conductor cable of 1.1 kv grade as per is 7098 (part-i) 1988 (amended up to date) of the following sizes to be laid direct on surface with the help of m.s. clamp of suitable thickness. (as per complete item no. 5 of the dnit)., size 35 sq.mm 3.5 core xlpe al. arm. cond. cable, size 25 sq.mm 3.5 core xlpe al. arm. cond. cable, supply and laying of xlpe insulated pvc sheathed aluminum conductor cable of 1.1 kv grade as per is 7098 (part-i) 1988 (amended up to date) of the following sizes to be laid in existing rcc/hume/dwc/ metal pipe. (as per complete item no. 6 of the dnit)., size 300 sq.mm 3.5 core xlpe al. arm. cond. cable, supply, erection testing and commissioning of l.t. cubical panel indoor type with degree of protection ip 54 fabricated from 14 gms (2mm) thick crca sheet and ms flat, (as per complete item no. 7 of the dnit)., 01 no. lt panel approx. size 1150 mm x 2400 mm

CTN :41012374 Due date: 29 Jul, 202529 Jul, 2025 NA
Tender For bid to ras corrigendum : supply of pvc pipe 110 mm dia each 3 mtr length open bracket make colon prince slash finolex slash supreme close bracket , pvc pipe t 110 mm dia each 3 mtr length open bracket make colon prince slash finolex slash supreme close bracket , wash hand basin 580 mm x 450 mm with assy and with pedestal confirming to is 2556dash2004 open bracket make colon parryware slash cera slash hindware close bracket , 40mm thick composite puf panel sandwiched between ppgi sheets 50 mm thick hot dipped galvanized steel as per item description , acid resistance tiles size 300mm x 300mm open bracket make colon johnson slash kajaria slash orient close bracket 1st quality , acrylic sheet 8 apostrophe x 4 apostrophe x 3mm open bracket make colon dashacrylic slash prakash close bracket , angle holder open bracket make colon anchor slash ssk slash cona close bracket , angle iron pickets , bed switch 5 amps open bracket make colon bajaj slash havells slash anchor close bracket , bib cock long spout brass chromium plated 15 mm weight not less than 330 gm open bracket make colon dashess ess slash prayag slash johnson suisse close bracket , bib cock long spout brass chromium plated 25 mm weight not less than 400 gm make ess prayag johnson suisse , bulb holder , cable pvc insulated elecric cables heavy duty 1100 volts size 1 point 5 sqmm single core frls make or havells or finolex or polycab , ceiling rose three terminal open bracket snow white close bracket open bracket make colon anchor slash ssk slash cona close bracket , cement opc 43 grade packed in hdpe bag each 50 kg wt make birla gold or ambuja or ultratech or acc or jk or dalmia or equivalent , cgi sheet 12 apostrophe x 3 apostrophe x 0dot63mm open bracket make colon sail slash tata slash jindal close bracket , change over switch 32 ampscomma 4 polecomma tpn confirming to is 13947 open bracket part 3 close bracket 2607 open bracket make colon dash havells slash standard slash l and t close bracket , change over switch 63 ampscomma 4 polecomma tpn confirming to is 13947 open bracket part 3 close bracket 2607 open bracket make colon dash havells slash standard slash l and t close bracket , charcoal , coarse aggregate 20mm graded , curtain arrangement drapery and rod made of 25 mm dia and 1600 mm long pre coated ms pipe with fancy type ends as per item description , door handle , door hinges 75 mm make isi marked , door steel mesh , earthing pit , electric geyser 5 star of capacity 25 ltr make vdashguard racold bajaj slash crompton , end cape all size , exhaust fan 230 volts 300 mm sweep plastic body alongwith louvers and complete fittings open bracket make colon bajaj slash havells slash crompton close bracket dot , fire ball extinguisher of 1dot3 kg wt with suitable provision for wall mounting and capable of self as per item description , galvanised iron wire mesh 100 x 100x 5 mm thick , gate valve 32 mm open bracket make colon sfmc finolex slash supreme close bracket , geyser pipe , glass putti , glazed ceramic tiles of size 600x600 mm thickness between 6 to 7mm make johnson kajaria orient open bracket 1st quality conforming to is 156222006 , individual standalone plastic body smoke alarm with adequate provision for fixing on wall slash ceiling slash roof the unit to have sensor as per item description , iwc of vitreous china squatting pan orissa pattern of size 580mmx440mm dark coloured with or trap make parryware hindware cera complete in all respects , joint socket all type , kero room heater tank capacity 18 ltrscomma height 60 cm weight min 14 kg width min 50 cm and max heating capacity 800 sqftdot , led blub head , led bulb 10 w , led bulb 18 slash 20 w , led bulb 9 w , led bulk head fitting high pressure die cast aluminum front cover with glass cover with specially design gasket with led lamp 10 watts make havells bajaj philips crompton , led ceiling light 36 wattcomma open bracket size 2 apostrophe x2 apostrophe close bracket make colon philipscomma syskacomma cromp

CTN :41237053 Due date: 02 Sep, 202502 Sep, 2025 NA
Tender For lavatory module for lwlrrm coaches (mdts133 rev-05, mdts118 rev-01 & l.n o.rbl-md46271 (part-1) dt.19/03/2024 are applicable) as per set list no. mcfpllmlwlrrm versio n-00 with addendum (rcf letter no. md46111, dated 16.04.2024) & corrigendum-1(rcf letter no. md 46111,dated 18.04.2024) along with modification as advised as per annexure-2-lwlrrm dated 16-06- 205. aluminum composite panels as per rcf letter no. md46251 dated14.06.2006. (note-the supply of lavatory module is to be done in knockdown condition and design of frp modules will be in 03 piece s as per non-ac coaches of frp modular toilet which shall be fully assembled inside the coach and ss back pieces for every amenities are provided). colour shade of subject item may be as per mcf desig n letter no. rbl-md46271 (part-1), dated 19.03.2024.packing instruction: spi111. [ warranty per iod: 78 months after the date of delivery ]

Central Government/Public Sector

CTN :41237867 Due date: 07 Aug, 202507 Aug, 2025 NA
Tender For supply of pure methane in new 0.5 liter w/c aluminum high pressure canister with fine control needle valve purity of 99.999 % with septum, make: asg or similar. firm should clear mention the make and mode l of item in their offer. [ warranty period: 30 months after the date of delivery ]

corporations/Associations/Others

CTN :41044978 Due date: 02 Aug, 202502 Aug, 2025 NA
Tender For corrigendum : supply of electrical item d d - power saving chowk 48w , power saving rod 48w , led bulb 9w , cable 10mm 3core aluminum , cable 16mm 3core aluminum , cable 16mm 3core copper , 100w bulb holder , 10mm wire copper

Central Government/Public Sector

CTN :41185962 Due date: 13 Aug, 202513 Aug, 2025 98.60 Lacs
Tender For tender for supply of provision of individual intensity control for runway threshold and end lights at shillong airport : : - supply of 1 x 6 sq. mm 5 kv grade single core. (refer item no.1 of boq page no.1) , supply of 5 kv grade 6 sq. mm size plug and receptacle. (refer item no.2 of boq page no.1) , supply of 50 mm size hdpe pipe. (refer item no.3 of boq page no.1) , supply of medium class gi pipes 40 mm. (refer item no.4 of boq page no.1) , supply of following size of xlpe insulated pvc sheathed aluminum conductor armored power cable of 1.1 kv. (refer item no.5 of boq page no.1) , supplying and making end termination with double brass compression gland and aluminium lugs. (refer item no.6 of boq page no.1) , supplying and making end termination with double brass compression gland and aluminium lugs. (refer item no.7 of boq page no.1) , supplying and making cable route marker with cement concrete. (refer item no.8 of boq page no.2) , making field connections by crimping upto 6 sq.mm plug and receptacle. (refer item no.9 of boq page no.2) , laying of following size hdpe pipe of size upto 90 mm isi marked along with existing accessories. (refer item no.10 of boq page no.2) , laying of the following size hdpe pipe of size upto 90 mm isi marked. (refer item no.11 of boq page no.2) , laying of one number pvc insulated & pvc sheathed armoured aluminium cable. (refer item no.12 of boq page no.2) , laying of one number pvc insulated and pvc sheathed. (refer item no.13 of boq page no.2) , laying of following size dia. medium b class gi pipe. (refer item no.14 of boq page no.2) , laying and fixing of one number pvc insulated. (refer item no.15 of boq page no.3) , laying and fixing of one number pvc insulated and pvc sheathed. (refer item no.16 of boq page no.3) , providing and laying 6 swg gi wire in the trench. (refer item no.17 of boq page no.3) , earthing with gi earth pipe 4.5 m long and 40mm dia. (refer item no.18 of boq page no.3) , supply of ci transformer housing box. (refer item no.19 of boq page no.3) , installation of transformer housing box. (refer item no.20 of boq page no.3) , sitc of indoor type air cooled constant current regulator. (refer item no.21 of boq page no.4) , sitc of indoor type air cooled constant current regulator. (refer item no.22 of boq page no.4) , integration of threshold and end lights circuits with the existing alcms panel. (refer item no.23 of boq page no.4) , design manufacturing supply installation testing and commissioning of lt panel. (refer item no.24 of boq page no.5)
 Loading, Please wait...

Connect us via What's Up