Latest alpha beta counter Tenders | Government alpha beta counter Tenders

Central Government/Public Sector

CTN :45714895

18 Jul, 2026 NA

Pune - Maharashtra

Tender For special repairs to lt panels and connected items at pyro, pinaka, nag mixture building, magazine area and ap building in hemrl, pune - taking out old serviceable/unserviceable lt panel/capacitor panel of any description or capacity keeping aside in safe custody for schedule of credit complete all as specified and directed, supply, fixing and commissioning of cpri approved factory made lt cubicle panel board outdoor type conforming to is/iec-61439-1&2 : 2011 with canopy, louvers & shutters made out of 3.15 mm thick crca sheet totally enclosed with necessary ventilations, weather, dust and vermin proof with front and rear opeing and lcoking arrangement, degree of protection ip 56, 415 volts, 3 phase, 4 wire, 50 hz having aluminium bus bar of capacity 1200 amps tpn duly colour coded and for neutral supported with dmc/smc insulator colour coded with heat shrinkable sleeve having short circuit current with minimum 65 ka for one second and suitable for internal connection including instantaneous over load and earth fault relays complete with digial type voltmeter and ammeter inclduing suitable range of cts of metering, selector switches for voltmeter and ammeter, set of three led type indicating lamps duly wired with suitable size of copper cables and panel board shall be grouted in the ground with suitable size of foundation in pcc 1:2:4 type b1, ms channels 50 x50 x 6mm with nut bolts, wahsers, etc. suitable for fixing with bus duct including comprising of the following:-incoming: (a) acb adjustable type with thermal magnetic release 4 pole, 800a, 415v, 50 ka, 50 hz - 01 no. outgoing: (b) mccb 4p, 400 amps, 36 ka,415v, ac supply including extended rotary handle and spreader terminals fo incoming and outgoing - 03 nos, (c) mccb 4p, 125 amps, 25 ka,415v, ac supply including extended rotary handle and spreader terminals fo incoming and outgoing - 01 nos, (d) panel mounted type digital multifunctional energy meter a, v,z, kw, pf t operated, lt 3 phase, 4 wire inclding ct ratio 200/5 - 04 nos, (e) control mcb c curve, sp, 6 to 32a, 10ka, c curve - 02 nos, (f) led phase indicator (r,y & b) - 01 set. (pyro sub stn), supply, fixing and commissioning of cpri approved factory made lt cubicle panel board outdoor type conforming to is/iec-61439-1&2 : 2011 with canopy, louvers & shutters made out of 3.15 mm thick crca sheet totally enclosed with necessary ventilations, weather, dust and vermin proof with front and rear opeing and lcoking arrangement, degree of protection ip 56, 415 volts, 3 phase, 4 wire, 50 hz having aluminium bus bar of capacity 1200 amps tpn duly colour coded and for neutral supported with dmc/smc insulator colour coded with heat shrinkable sleeve having short circuit current with minimum 65 ka for one second and suitable for internal connection including instantaneous over load and earth fault relays complete with digial type voltmeter and ammeter inclduing suitable range of cts of metering, selector switches for voltmeter and ammeter, set of three led type indicating lamps duly wired with suitable size of copper cables and panel board shall be grouted in the ground with suitable size of foundation in pcc 1:2:4 type b1, ms channels 50 x50 x 6mm with nut bolts, wahsers, etc. suitable for fixing with bus duct including comprising of the following:-incoming: (a) acb adjustable type with thermal magnetic release 4 pole, 800a, 415v, 50 ka, 50 hz - 01 no. outgoing: (b) mccb 4p, 400 amps, 36 ka,415v, ac supply including extended rotary handle and spreader terminals fo incoming and outgoing - 01 nos, (c) mccb 4p, 315 amps, 25 ka,415v, ac supply including extended rotary handle and spreader terminals fo incoming and outgoing - 01 nos, (d) mccb 4p, 250 amps, 25 ka,415v, ac supply including extended rotary handle and spreader terminals fo incoming and outgoing - 02 nos (e) panel mounted type digital multifunctional energy meter a, v,z, kw, pf t operated, lt 3 phase, 4 wire inclding ct ratio 800/5 - 04 nos, (e) con

State Government

CTN :45730100

04 Jul, 2026 NA

Koradi - Maharashtra

Tender For procurement of spares for wagon tippler weighbridges & belt weighers installed at chp 3x660mw, ktps, koradi. - chpelect load cell for 30 mt cap, load cell capacity 45 mt, canister type, bw 1250 tph load cell, bw 1250 tph remote indicator, bw 1250 tph speed sensor assy, weigh bridge frame turn buckle, hylum pads for load cell of 50mt road wb, load cell mount with strut,button,plug, reputed 100 mt top cup for load cell etc..

CTN :45642888

03 Jul, 2026 50.47 Lacs

Purnia - Bihar

Tender For corrigendum : supply of , frl 1 or 4 inch with pressure guage , quick exhaust valve 1 or 4 festo or norgen , quick exhaust valve 1 or 8 festo or norgen , spray,wd-40 cap- 400ml btl , cassette ss as per kosan carousel , guide rod for kosan introduction unit , 5 or 2 spring return valve , 1 or 2inch -f, ss ball valve , magnetic sensor , tepar strip for 90 deg bend , lock pin,chain conveyor duplex chain , switch,139a714,carousel kosncris - pressure switch , ejection puller arm , ejection pusher arm , needle valve , pneumatic cylinder 12mm or 16mm with fittings , shaft size- 40mm x 280 mm en-8 , shaft size- 40mm x 4000 mm en-8 , nut bolt 1.5inch x 10mm , nut bolt 1inch x10mm , f-mounting , ejection flexible coupling , pneumatic cylinder- 50 or 160- norgen or smc , toggle joint rod- lt-200 mm , pin of non-pneumatic filling gun , bearing no.6206 , bearing no.6304 , gas stop valve lpg 1 or 2inch , steel plate thick 10mm size 0.5mx0.5m , key pad for cuc card steel mk1v , key pad for cuc card mkii , anchor fastener length150mm dia 10mm gi , anchor fastener length150mm dia 12mm gi , anchor fastener length150mm dia 16mm gi , nut bolt length 1inch dia 6 mm , counter bolt 8mm, allenkey type, with lock nut , eye bolt for centering arm , spring,159a533,kosncris pt head , ss rod of gd or pt base , ss block of gd or pt base , linear bearing , optical cable for bar code sensor , automatic hot air sealing head , pneumatic cylinder size 500mmx50 norgan , 50 dia sealkit norgren , 50 dia sealkit janatics , solenoid coil for kosan filling scale- smc make , lpg hose of length 1 m , lpg hose of length 1.5 m , lpg hose of length 0.5 m , pencil sensor , rivet type conveyor chain , rod of kosan filling gun pneumatic type , kosan filling gun cup , dampner or kosan filling gun bush , kosan filling scale leg , lower bell for gd , vibration absorber for gd head , kosan fintec load cell for filling scale 200kg , load cell for jisl adjustment scale 650 kg , manual cvt head,kpot0122 carousel,kosncr , lifter plate for check scale , c channel of conveyor , telescopic boom pipe length 6m dia 1.5inch , drag chain , boom e plate with taflon ss thickness-10mm 1mx1m with taflon 12mm , mark iv display , reflector for kosan carousel , lpg filling gun pneumatic type , pneumatic counter , vacuum or suction indicator

CTN :45739418

15 Jul, 2026 4.97 Lacs

Shahjahanpur - Uttar Pradesh

Tender For supply of proximity sensor load current 200 ma 12 40 vdc , vacuum gauge dia 6 half fitting heavy duty 0 to 760 mm of hg , vacuum gauge dia 6 3 8 0 to 760 mm of hg , vacuum gauge dia 4 half fitting heavy duty 0 to760 mm hg , vacuum gauge dia 4 3 8 0 to 760 mm of hg , digital techometer with sensor in five digit , air regulator with air filter , shielded compansetting cable j k type , sensor for digital rpm meter 30mm od , electronic temperature controller j k pt100 type , electronic temperature indicator j k pt100 type , thermocouple j k pt100 type size 12 , temperature gauge stem type dia 6 150 c or 200c , five port solonoid valve 220v , pressure gauge dia 6 heavy duty fitting 2kg cm2 , pressure gauge dia 6 heavy duty fitting 10kg cm2 , pressure gauge dia 6 heavy duty fitting 16kg cm2 , pressure gauge dia 6 heavy duty fitting 21kg cm2 , pressure gauge dia 6 heavy duty fitting 40kg cm2 , pressure gauge dia 6 3 8 fitting 2kg cm2 , pressure gauge dia 6 3 8 fitting 10kg cm2 , pressure gauge dia 6 3 8 fitting 16kg cm2 , pressure gauge dia 6 3 8 fitting 21kg cm2 , pressure gauge dia 6 3 8 fitting 40kg cm2 , pressure gauge dia 4 heavy duty fitting 21 kg cm2 , pressure gauge dia 4 heavy duty fitting 40 kg cm2 , pressure gauge dia 10 fitting 40kg cm2 , pressure transmitter 0 to 25 bar , pressure transmitter 0 to 40 bar , digital stroke counter with sensor six digit , pressure gauge heavy duty glyserin filled dia 4 0 to 40 kg cm2 , pressure gauge heavy duty back connection 0 4kg cm2 , pressure gauge heavy duty back connection 0 10kg cm2 , pressure gauge heavy duty back connection 0 to 40kg cm2 , thermocouple j k pt100 type size 24 , multi point digital temperature indicator k type 8 point

CTN :45714162

14 Jul, 2026 9.90 Lacs

Saharanpur - Uttar Pradesh

Tender For supply of double ended shear beam ball type cap 30 ton for truck trolley weighbridge make zemic digital , double ended shear beam ball type cap 10 ton for cart hitch boggi weighbridge make zemic digital , s type 1 2 ton capacity load cell for out centre electro mechanical weighbridge make load master adi , battery 6v 7 2 ah , weight indicator for out center working on digital , weight indicator for out center working on analog , main card for indicator , r- s 232 weight transfer chip card , jumbo display size 2 ft x 1ft , load cell with installation , charger 12 volt 2 amp

CTN :45478137

01 Jul, 2026 NA

Vidisha - Madhya Pradesh

Tender For corrigendum : items - computer and servises and otheres, mcb (miniature circuit breaker), acb (3200a/4000a ), acb (air circuit breaker), allen key set, amf relay, ammeter, annunciation system, anti-corrosion spray, arc flash suit, arc flash suit (ht/lt panel ), auxiliary contacts, avr (automatic voltage regulator), battery charger, blower/air blower, breather assembly, bus coupler acb, busbar insulators, busbar supports, cable glands, cable glands, cable lugs, cable ties, cable ties, changeover switch, clamp meter, clamp meter, combination pliers, consumables, contact cleaner spray, contactor, continuity tester, control cable, control fuses, control relay, control wires, cooling fan, copper busbar, crimping tool, ct (current transformer), current transformer (ct), dg set synchronization panel (3 750 kva), digital multimeter, digital multimeter, discharge rod, earth fault relay, earth switch, earth tester, earthing rod, electrical contact cleaner, electrical gloves (11 kv rating), electrical safety gloves, emergency stop switch, energy meter, engine control module, face shield, ferrules, ferrules, flexible wire, frequency meter, fuse fuse base, heat shrink sleeves, heat shrink tubes, hrc fuse, hrc fuses, ht protection relay, indicator lamps (r/y/b), infrared thermometer / thermal camera, insulated screwdriver, insulation tape, isolator switch, lightning arrester, load sharing module, lockout-tagout (loto) kit, loto kit, lt pcc/mdb panel, lubricant spray ( ), lugs, maintenance tools, mccb, mccb (molded case circuit breaker), megger (insulation tester), megger 5 kv, microfiber cloth, motorized mechanism, multifunction meter, multifunction meter, nose pliers, numerical protection relay, oti (oil temperature indicator), over current relay, overload relay (olr), phase sequence meter, phase sequence tester, plc module, power analyzer, power cable, power factor meter, protection & metering, pt/vt (potential transformer), push buttons (start/stop), pvc insulation tape, reverse power relay, rust remover, safety equipment, safety goggles, safety helmet, safety helmet, safety shoes, safety shoes, screwdriver set, secondary injection test kit, selector switch, shunt trip coil, side cutter, silica gel, smps (power supply), soft brush, spanner set, speed governor module, spiral wrapping, spring charging motor, starting relay, synchronizing relay, terminal blocks, thermal camera, thermostat, timer relay, torque wrench, transformer buchholz relay, transformer oil, under/over frequency relay, under/over voltage relay, uv coil, vacuum cleaner, vcb (vacuum circuit breaker), voltage tester, voltmeter, wire markers, wire stripper, wti (winding temperature indicator), , , , comprehensive maintenance of substation, transformer, panels, synchronization panel a including all consumables, accessories, minor & majour spares, cleaning materials, testing instruments, preventive maintenance and breakdown maintenance complete., annual maintenance of substation, transformer, panels, synchronization panel a including all consumables, accessories, minor spares, cleaning materials, testing instruments, preventive maintenance and breakdown maintenance complete.

corporations/Associations/Others

CTN :45712936

13 Jul, 2026 19.20 Lacs

Sonbhadra - Uttar Pradesh

Tender For running maintenance of plc system - running preventive and breakdown maintenance of plc control system with electrical drives all control and instrumentation system of ash handling , replacement new erection of impulse line , replacement new erection of instrument fitting adopter nut tails elbow connector etc , overhauling b 501 and b 601 ss cock valve , overhauling repairing of junction boxes , servicing recalibration erection of fuzi yokogava rosemount etc transmitters , overhauling and recalibration new erection of digital indicators , overhauling and recalibration erection of flow meter conductivity meter , complete overhauling erection of level switches , replacement of pressure switch gauge vibration switch , removal testing erection commissioning calibration of temp gauges switches thermocouple , replacement erection overhauling cleaning of union isolating valveforged body valve , blowing of tapping points of different pressure transmitters switches , fabrication repairing of instruments plateform , laying patrolling of instrumentation cable , servicing and maintenance of air conditioner , cleaning of control room plc system , repairing of ups , service replacement of faulty butterfly valves along with act , servicing replacement of faulty diaphragm type valves , changing spindle gland of root valves , cleaning blowing by air of impulse lines , attend leakage from steam water air line , replace gauges switches of pressure temp , testing caliberation of pressure gauges , testing calibration of pressure switches , testing calibration of temp gauges , testing calibration of temp switches , replacement of thermocouples , cleaning servicing of terminal block in compressor house swas system , changing of ss root valves , servicing of 10mm hp lp 3way manifold valves , replace of 10mm hp lp 3way mfold valves , removal choking replace of impulse line , erection replacement of pvc armored compensate cable , replacement of universal digital indicator , servicing replacement of faulty 4way valve with actuator , replacement remounting of smps 24 v dc , dismantling replacement of combination timerof compressor , servicing of sampling cooler dhx18 sco2 , servicing of sampling cooler dhx12 sco2 , servicing of sampling cooler dhx06 sco1 , miscellaneous mechanical febrication , maintenance of actuator of butterfly valve , maintenance and upkeep of terminal box of motor of actuators in cw pump , maintenance re erection of butterfly valve actuator motor , revisioning and upkeep of marp dcs panel , revisioning testing of various type of switches of local control panel , maintenance revisioning upkeep and testing of 415 v power supply module , maintenance upkeep and repair of junction box of butterfly valve , servicing of mov motors actuators and limit switch assembly , checking cleaning and cable dressing mov motor , overhauling cleaning reconditioning of various size batteries , load test once in six months for various size battery of ups installed for 5x200mw , replacement of damaged switches mcb in acdb panel , cleaning painting of the wooden battery stands , maintenance of window type split type ac , gas charging of ac , rewinding of burnt fan motor

Central Government/Public Sector

CTN :45717520

22 Jul, 2026 NA

Chennai - Tamil Nadu

Tender For automatic mild steel compression testing machine for testing the strength of concrete as peris 14858 : 2000 or its latest, capacity - 2000kn, least count- 0.1 kn or better, accuracy- +/- 1%, accuracy class - class i, for cubes up to 200 mm and cylinders up to dia. 150x300 mm, power source- 230 v, 50 hz, single phase ac supply, display type - digital lcd or led, connectivity- bluetooth/wifi, usb 2.0, rs232 with suitable software and printer interface, required operation manual, carrying case and calibration certificate. (method of testing the concrete cube is as per is : 516 or latest). software features: ucs, youngs modulus, poissons ratio, software shall be capable to plot graph of real time data acquired for load vs. displacement, load vs. time, stress vs. strain. machine shall be able to operate as standalone with digital indicator unit as well as with dedicated data management and analysis software installed in a desktop pc or laptop(ms-windows), peak load, peak stress, unique record number shall be displayed on the digital indicator. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45681506

01 Jul, 2026 NA

Mumbai - Maharashtra

Tender For supply of twin path round endless polyster sling with covemax cover, fiber optic & over load indicator having full signal part anti abrasive protective 1/2 mtrs. 2 nos. fitted on single part cap=3 tons,effective length=2.5mtrs., cir length=5mtrs.,width=50mm.along with proof load certificate issued by agency/competent person approved by directorrate of industrial safety and health maharashra state.slingest,slingmax,e.e.karachiwalla&co. and eletech [ warranty period: 30 months after the date of delivery ] ]

CTN :45693782

13 Jul, 2026 73.10 Lacs

Bhiwani - Haryana

Tender For supply ere commi of various electromechanical equipment like 5 no 5 cs vt pump electric motors starter panel and other allied material for flood protection works from the field area of village dang khurd outfall at rd 65000r of nigana feeder - supply, erection & commissioning of 5 c/s axial/mix flow water lubricated vertical flood pumps of 5 cs. discharge at 1440 rpm at static head of approx 6.0 mtr. having adjustable height, including ms bend including flange welding, ss/ht nut & bolts etc complete in all respect as per site requirement with epoxy coating & as per approved specifications of the department, supply, erection & commissioning of solid shaft motor of capacity 30 hp, 1440 rpm, 3 phase, 380 volt+- 10%, with eficiency class ie2 (with 35 mtr compatible 3 phase submersible cu cable from motor to panel/starter) suitable for fitment with 5 cs. v.t axial/mix flow pump type vertical flange mounted as per approved specifications of the department., supply, erection & commissioning of fully automatic star delta starter of cap. 150 amp including all accessories as one incomer of mccb (150amp) with 1 no mcb for lighting load, contactor rating 120 amp, 90 amp, 70 amp with control transformer for control supply, outgoing indicator, having mpr & all types of protections i.e.uv/ov/ over current, phase imbalance/phase reversal protection, locked rotor, dry run etc, digital meters, push buttons, bus bars, capacitor bank, seperate relay for single phase protection etc. complete in all respect suitable for open fields operation of 1 no. motor of capacity of 30 hp with a stand of ms channel with canopy having suitable operating height above the kachha open fields as per approved specifications of the department. (suitable for voltage range 380 +- 10%,) panel should be outdoor type., supply, erection & commissioning of m.s delivery pipe 10" dia. made of ms plate both end flanged (equal to or less than 6 mtr length of pipe) as per approved specification & make. (including ss/ht nut & bolt, rubber packing & other fitment accessory required), supply, erection and commissioning of ms girder parallel flange section ismb 150 with primer and bituminous based paint inside & outside of length 4mtr (approx wt 60 kg per pc) as per approved make & conforming to is808:2021.

Alpha Beta Counter Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector