Tender For supply of long life loco side buffer assembly capacity 30 kj min. as per rdso drg. no.sk.dl-4748 alt-1 & rdso spec. no. mp-0.41.00.03 (rev.02) november 2022 [ warranty period: 30 months after the date of delivery ]
Tender For auction sale of depot ferrous scrap - scrap ms melting consisting of buffer plunger with or without spindle, buffer socket, brake beam and truss bar, nut-bolt, rivets, pin, bush, small die, inner race, outer race, suspention strip, washer, door hinges, door roster, ff or rf, hb wheel, side bearer plate, yoke plate, bottom plate, ,sbs plate, anchor plate, hb lever, be lever, bc link, empty axle box, axle box cover, axle box housing, foot step, briddle bar, striker casting, back stopper, empty load box, main hole cover, shackle, shackle pin, screw coupling, bearing long shaft, cbc parts of coaches with undetchable nylon bush and other nylon items, shackle stone, coil spring, locking plate, shaft, operating handle, draw bar, broken coil spring up to four coil, front and rear plate, vertical support assly , main pin of cbc shank, manual uncoupling handle, wedge lock cbc parts of coaches, vertical supporting device for cbc, anti roll bar of lhb coaches, plunger, foot step, bb hanger, eq lever, bk shoe, striker casting, brake shoe head, bk.shoe key, silent block yoke pin support plate, lashing chain, buckle, roller, backing ring, spacer, distance ring, cone assembly and other parts of ctrb, wire supporting hook, protecting tube, silent block all type, l.s. beam, knuckle pin, knuckle plate, clamp, bearing pieces, silent block all type, sab complete and sab loose part, sab rod, and all type rod released from wagons loose and attached, control rod,coupler rod, small cut pieces of s.s., bracket, upper and lower part of control arm of lhb coaches and other ferrous melting category items, with or without minor undetachable non-ferrous attachment. [qty on approx basis].
Tender For corrigendum : auction sale of rolling stock - condemned bg wag-5ha ac loco no. 23480 with all available ferrous -non ferrous-wooden fittings- excluding the following reclaimable items- (1) wheel set with bull gear(hitachi), msu and wheel disc- 6 sets (2) axle box housing with ferrous components-12 nos. (3) cbc assembly with yoke, draft gear and shank- 2 nos removed items- (1) battery-10 nos (2) line contactor-4 nos (3)loco side buffer-4 nos (4) transformer with conservator-1 no (5) tap changer with smgr-1 no. loco no- 23480 wag-5ha. ds8 no. 022822-25-22474 of 05.02.2026 location- els/ajj cus- sse-els-ajj. pl.no. 98980889. note- (1) rc items to be handed over to custodian at specified location before final delivery.(2) cutting permitted to loadable size only. (3) crane/jcb loading permitted.(4) purchaser should take safety precaution while cutting of loco.(5) at the time of delivery all items including zero value items such as rexene, rubber, frp etc., should be removed and cleared by purchaser from railway premises and should be disposed as per the existing norms of central/state government.
Tender For corrigendum : supply of long life loco side buffer assembly (capacity: 30 kj minimum) to rdso drg.no. sk.dl- 4748 (alt-2) or latest and spec.no. mp.0.41.00.03 (rev.03) aug-2024 & amd no.1 sept. 2025 or latest. [warranty period: 30 months after the date of delivery ]
Tender For auction sale of rolling stock - condemned bg-8 wheeler wagons- with all available fittings there on but excluding the following reclaimable items - 1)cr bcnm1 30019261000 - rc items:-1.casnub bogie complete set with bolster assembly and brake gear assembly, 2.wheel set complete with axle, axle box roller bearing complete set, 3.yoke pin, and 4.side bearer top plate, 2)cr boxnm1 10019600252 - rc items:-1.casnub bogie complete set with bolster assembly and brake gear assembly, 2.wheel set complete with axle, axle box roller bearing complete set, 3.yoke pin, and 4.side bearer top plate, 3)sr boxnm1 10069645319 - rc items:-1.casnub bogie complete set with bolster assembly and brake gear assembly, 2.wheel set complete with axle, axle box roller bearing complete set, 3.yoke pin, and 4.side bearer top plate, 4)sc boxnr 25099760826 - rc items:-1.casnub bogie complete set with bolster assembly and brake gear assembly, 2.wheel set complete with axle, axle box roller bearing complete set, 3.yoke pin, and 4.side bearer top plate, 5)sc boxnr 25099760284 - rc items:-1.casnub bogie complete set with bolster assembly and brake gear assembly, 2.wheel set complete with axle, axle box roller bearing complete set, 3.yoke pin, and 4.side bearer top plate, 6)sc boxnm1 10099660733 - rc items:-1.casnub bogie complete set with bolster assembly and brake gear assembly, 2.wheel set complete with axle, axle box roller bearing complete set, 3.yoke pin, and 4.side bearer top plate, 7)cr boxnm1 10019860229 - rc items:-1.casnub bogie complete set with bolster assembly and brake gear assembly, 2.wheel set complete with axle, axle box roller bearing complete set, 3. centre buffer coupler body assembly complete without draft gear and yoke vn side only, 4.yoke pin, and 5.side bearer top plate = 7 wagons. ds8 no:023310-25-24115 dt: 27.02.2026. pl.no. 98110159, location: jtj yard. custodian: sse - c and w - jtj. remarks: 1) rc items to be handed over to the custodian at specified location before final delivery-stores section. (2) cutting permitted to loadable size only. (3) crane loading permitted. (4) purchaser should take safety precaution while cutting of wagons. (5) at the time of delivery all items including zero value items such as rexene, rubber, frp etc., should be removed and cleared by the purchaser from railway premises and should be disposed as per the existing norms of central/state government. (6) wagons are in grounded condition, bogies and wheel sets are in removed condition and are kept aside.
Tender For auction sale of rolling stock - condemned bg-8 wheeler wagons- with all available fittings there on but excluding the following reclaimable items - 1)se boxnr 25079624773 - rc items:-1.casnub bogie complete set with bolster assembly and brake gear assembly, 2.wheel set complete with axle, axle box roller bearing complete set, 3.yoke pin, and 4.side bearer top plate, 2)se boxnr 10079860290 - rc items:-1.casnub bogie complete set with bolster assembly and brake gear assembly, 2.wheel set complete with axle, axle box roller bearing complete set, 3.yoke pin, and 4.side bearer top plate, 3)ecr bcnm1 30109360019 - rc items:-1.casnub bogie complete set with bolster assembly and brake gear assembly, 2.wheel set complete with axle, axle box roller bearing complete set, 3.yoke pin, and 4.side bearer top plate, 4)se boxnr 25079673702 - rc items:-1.casnub bogie complete set with bolster assembly and brake gear assembly, 2.wheel set complete with axle, axle box roller bearing complete set, 3.yoke pin, and 4.side bearer top plate, 5)cr bcnm1 30019061037 - rc items:-1..wheel set complete with axle, axle box roller bearing complete set, 2.yoke pin, and 3.side bearer top plate, 6)er bobrnm1 72029562036 - rc items:-1.casnub bogie complete set with bolster assembly and brake gear assembly, 2.wheel set complete with axle, axle box roller bearing complete set, 3. centre buffer coupler body assembly complete without draft gear and yoke tpt side only, 4.yoke pin, and 5.side bearer top plate, 7)er bobrm1 72029578549 - rc items:-1.casnub bogie complete set with bolster assembly and brake gear assembly, 2.wheel set complete with axle, axle box roller bearing complete set, 3. centre buffer coupler body assembly complete without draft gear and yoke tpt side only, 4.yoke pin, and 5.side bearer top plate = 7 wagons. ds8 no:023310-25-24113 dt: 27.02.2026. location: jtj yard. custodian: sse - c and w - jtj. pl.no. 98110159, remarks: 1) rc items to be handed over to the custodian at specified location before final delivery-stores section. (2) cutting permitted to loadable size only. (3) crane loading permitted. (4) purchaser should take safety precaution while cutting of wagons. (5) at the time of delivery all items including zero value items such as rexene, rubber, frp etc., should be removed and cleared by the purchaser from railway premises and should be disposed as per the existing norms of central/state government. (6) wagons are in grounded condition, bogies and wheel sets are in removed condition and are kept aside except for sl no 5) cr bcnm1 30019061037.
Tender For auction sale of rolling stock - condemned bg-8 wheeler wagons- with all available fittings there on but excluding the following reclaimable items - 1)sc bcnm1 30099060074 - rc items:-1.casnub bogie complete set with bolster assembly and brake gear assembly, 2.wheel set complete with axle, axle box roller bearing complete set, 3. centre buffer coupler body assembly complete without draft gear and yoke tpt side only, 4.yoke pin, and 5.side bearer top plate , 2)er boxnm1 10029660925 - rc items:-1.wheel set complete with axle, axle box roller bearing complete set, 2.yoke pin, and 3.side bearer top plate, 3)wr boxnr 25089814638 - rc items:-1.casnub bogie complete set with bolster assembly and brake gear assembly, 2.wheel set complete with axle, axle box roller bearing complete set, 3. centre buffer coupler body assembly complete without draft gear and yoke tpt side only, 4.yoke pin, and 5.side bearer top plate, 4)sc boxnr 10099818172 - rc items:-1.casnub bogie complete set with bolster assembly and brake gear assembly, 2.wheel set complete with axle, axle box roller bearing complete set, 3.yoke pin, and 4.side bearer top plate, 5)sc boxnm1 10099663871 - rc items:-1.casnub bogie complete set with bolster assembly and brake gear assembly, 2.wheel set complete with axle, axle box roller bearing complete set, 3.yoke pin, and 4.side bearer top plate, 6)cncr bfkn 98259014008 - rc items:-1.wheel set complete with axle, axle box roller bearing complete set, 2.yoke pin, and 3.side bearer top plate, 7)er bobrnm1 72029563613 - rc items:-1.casnub bogie complete set with bolster assembly and brake gear assembly, 2.wheel set complete with axle, axle box roller bearing complete set, 3.yoke pin, and 4.side bearer top plate= 7 wagons. ds8 no:023310-25-24108 dt: 27.02.2026. pl.no. 98110159 location: jtj yard. custodian: sse - c and w - jtj. remarks: 1) rc items to be handed over to the custodian at specified location before final delivery-stores section. (2) cutting permitted to loadable size only. (3) crane loading permitted. (4) purchaser should take safety precaution while cutting of wagons. (5) at the time of delivery all items including zero value items such as rexene, rubber, frp etc., should be removed and cleared by the purchaser from railway premises and should be disposed as per the existing norms of central/state government. (6) wagons are in grounded condition, bogies and wheel sets are in removed condition and are kept aside except for wagon sl no 2&6.