Latest alternator pulley Tenders | Government alternator pulley Tenders

CTN :45627159

02 Jul, 2026 NA

Gurdaspur - Punjab

Tender For corrigendum : tender for clutch pulley bearing repair , coil repair , magnetic clutch repair , bearing noise issue repair , jammimg seizure

CTN :45703384

06 Jul, 2026 NA

Uttara Kannada - Karnataka

Tender For tender for repair and refurbishment of pulley and guide raise assembly for raising lowering of multifunction ma

Central Government/Public Sector

CTN :45702731

07 Jul, 2026 NA

Shoranur - Kerala

Tender For auction sale of rolling stock - pl no.98111061, condemned bg-8 wheeler- icf gs coaches 4 nos, without bogie, with all available ferrous, non-ferrous-wooden fittings thereon but excluding the following 9 reclaimable mechanical rc items common to all 4 coaches - 1] complete bogie arrangements including wheel sets 2 nos, 2] buffer plunger and casing 4 nos 3] cbc/screw coupling set [draw bar with hook, draft gear assembly] 2 set, 4] bogie mounted brake cylinder 4 nos, 5] main doors -6 nos, 6] wearing piece( bronze) and plate 4 nos each, 7] distributer valve complete full set 1 set, 8], cut off angle cock- 4 nos, 9] dirt collector- 2 nos.. 1} coach no. special repair gs 036430 (year built 2003), ds-8 no. 334711 dt 08.06.26, electrical rc items 1] ] bldc fan 400 mm-27 nos, 2) 9w led lamp- 28 nos, 3] 2w led lamp 4 nos, 4] switches, 5] mobile charger sockets, 6] regulator 4.5 kw 1 no, 7] vrla battery - 19 nos, 8] battery tray 4 nos, 9] rotary switch with panel board- 1 no, 10] alternator- 1 no, 11]alternator to regulator copper wire- 1 kg. 12] tensioning device, 13] v belts, 14] axle pulley.. 2) coach no. special repair gs 056435 (year built 2005), ds-8 no. 334704 dt 02.04.26, mechanical rc items as detailed above, electrical rc items 1] alternator 4.5 kw - 1 no, 2] regulator 4.5 kw 1 no, 3] vrla battery - 19 nos, 4] tensioning device 1 no, 5] bldc fan 400 mm-27 nos, 6] 9w led lamp- 28 nos, 7] 2w led lamp 4 nos, 8] md switches, 9] mobile charger socket, 10] rotary switch with panel board- 1 no, 11] emergency light unit- 2 nos, 12] v belt- 4 nos, 13] axle pulley- 1 no. 14] battery tray 4 nos. 3) coach no. special repair gs 071189 (year built 2007), ds-8 no. 334710 dt 08.06.26, mechanical rc items as detailed above, coach no. special repair special repair gs 071189 electrical rc items 1] ] bldc fan 400 mm-27 nos, 2) 9w led lamp- 28 nos, 3] switches, 4] emergency lamp unit- 2 nos, 5] mobile charger sockets, 6] regulator 4.5 kw 1 no, 7] vrla battery - 19 nos, 8] battery tray 4 nos, 9] rotary switch with panel board- 1 no, 10] alternator- 1 no, 11]alternator to regulator copper wire- 1 kg. 12] tensioning device, 13] v belts, 14] axle pulley. 4) coach no. special repair gs 046452 (year built 2004), ds-8 no. 334714 dt 10.06.26, mechanical rc items detailed as above , coach no. special repair special repair gs 046452 as mentioned above electrical rc items 1] ] bldc fan 400 mm-27 nos, 2) 9w led lamp- 28 nos, 3] switches, 4] emergency lamp unit- 3 nos, 5] mobile charger sockets, 6] regulator 4.5 kw 1 no, 7] vrla battery - 19 nos, 8] battery tray 4 nos, 9] rotary switch with panel board- 1 no, 10] alternator- 1 no, 11]alternator to regulator copper wire- 1 kg. 12] tensioning device, 13] v belts, 14] axle pulley. custodian sse/ c&w/ shoranur. location: 3 coaches stabled at ioh shed premises/ shoranur coach no 056452 presently available at road no 12 shoranur yard, it is to be shifted to ioh shed siding for cutting/delivery by the custodian.

Central Government/Public Sector

CTN :45702732

07 Jul, 2026 NA

Shoranur - Kerala

Tender For auction sale of rolling stock - pl no.98111061, condemned bg-8 wheeler- icf gslrd coaches 4 nos, without bogie, with all available ferrous, non-ferrous-wooden fittings thereon but excluding the following 9 reclaimable mechanical rc items common to all 4 coaches - 1] complete bogie arrangements including wheel sets 2 nos, 2] buffer plunger and casing 4 nos 3] cbc/screw coupling set [draw bar with hook, draft gear assembly] 2 set, 4] bogie mounted brake cylinder 4 nos, 5] main doors -6 nos, 6] wearing piece( bronze) and plate 4 nos each, 7] distributor valve complete full set 1 set, 8], cut off angle cock- 4 nos, 9] dirt collector- 2 nos.. 1} coach no. special repair gslrd 056750 (year built 2005), ds-8 no. 334706 dt 02.04.26, electrical rc items 1] alternator 1 no, 2] regulator 1 no, 3] tensioning device 1 no, 4] bldc fan -7 nos, 5] 9w led lamp- 15 nos, 6] 2w led lamp 4 nos, 7] 5 w led lamp 4 nos 8] side lamp 2 nos 9] tail lamp 2 nos 10] toggle switch 17 nos 11] rotary switch with panel board- 1 no 12] v belt- 4 nos, 13] axle pulley- 1 no 14] alternator to regulator copper wire- 1 kg. 2} coach no. special repair gslrd 051121 (year built 2005), ds-8 no. 334707 dt 21.04.26, electrical rc items 1] alternator 1 no, 2] regulator 1 no, 3] tensioning device 1 no, 4] bldc fan -7 nos, 5] 9w led lamp- 14 nos, 6] 5 w led lamp 4 nos 7] side lamp 2 nos 8] tail lamp 2 nos 9] rotary switch with panel board- 1 no 10] v belt- 4 nos, 11] axle pulley- 1 no 12] alternator to regulator copper wire- 1 kg. 13] mobile charger sockets 14] emergency lamp unit- 2 nos 15] vrla battery - 19 nos, 16] battery tray 4 nos..3} coach no. ner gslrd 073723 (year built 2007), ds-8 no. 334712 dt 08.06.26, electrical rc items 1] alternator 1 no, 2] regulator 1 no, 3] tensioning device 1 no, 4] bldc fan -7 nos, 5] 9w led lamp- 16 nos, 6] 2 w led lamp 2 nos 7] side lamp 2 nos 8] tail lamp 2 nos 9] rotary switch with panel board- 1 no 10] v belt- 4 nos, 11] axle pulley- 1 no 12] alternator to regulator copper wire- 1 kg. 13] mobile charger sockets 14] emergency lamp unit- 1 no 15] vrla battery - 19 nos, 16] battery tray 4 nos. 17] luggage light 4 nos ..4) coach no. nr gslrd 064925 (year built 2006), ds-8 no. 334713 dt 08.06.26, electrical rc items 1] alternator 1 no, 2] regulator 1 no, 3] tensioning device 1 no, 4] bldc fan -7 nos, 5] 9w led lamp- 16 nos, 6] 2 w led lamp 2 nos 7] side lamp 2 nos 8] tail lamp 2 nos 9] rotary switch with panel board- 1 no 10] v belt- 4 nos, 11] axle pulley- 1 no 12] alternator to regulator copper wire- 1 kg. 13] mobile charger sockets 14] switches 15] emergency lamp unit- 2 nos 16] vrla battery - 19 nos, 17] battery tray 4 nos. 18] luggage light 4 nos...custodian sse/ c&w/ shoranur. location: 3 coaches stabled at ioh shed premises/ shoranur coach no 051121 presently available at road no 12 shoranur yard, it is to be shifted to ioh shed siding for cutting/delivery by the custodian.

CTN :45687496

13 Jul, 2026 NA

Rupnagar - Punjab

Tender For 745 /p-3/emp-13364 dt 23.06.26 for repair, laying and jointing of conveyor belts and pulley laggings of conveyor system of chp at ggsstp, roopnagar

CTN :45692588

02 Jul, 2026 16.49 Lacs

Jamtara - Jharkhand

Tender For water treatment plant cleaning,purchasing of equipments for wtp, laying of di pipes and sluice valves, construction of sv chamber and phed esr repairing for jamtara nagar panchayat. - labour for site clearance -do--e/i, desilting the supply well, intake well /head works, sump of water supply /sewerage works etc. in wet or dry condition including lifts upto 9 m and lead upto 150m as required beyond the work site,stacking, spreading, including necessary guarding, etc. complete, as directed by e/i, supplying and laying of rapid sand gravity filter sand, supplying and laying of rapid sand gravity filter gravel, supplying of bamboo for scaffolding works, supplying of narial ropes for binding works submersible pump set, requirement of plumber class-ii for opening & closing of valve & other related works, requirement of electrician grade-ii for making required connections & other related works, hiring of different tools,chain pulley & tackles for cleaning & other works, disposal of excavated earth & filter bed sand, sand (lead 02k+10p=12 km), gravel (22 k.m. lead), tyre coupling (unique 3409-gn tyre coupling for 100hp & 50hp), bosch lithium based grease, graphit gland pack rope 12mm, graphit gland pack rope 16mm, 2.2kw (3hp) foot mounted motor tefc 1500 rpm 3-phase motor for clariflocculator, multi-blade paddles mounted on central shaft driven by foot-mounted geared motor, onload changeover switch 800a,415v, 4 pole, digital voltmeter (0-500v)-3 phase indicator, digital ammeter (0-500a)-3 phase indicator, led indicator lamp or phase light (r/y/b/g), pvc/xlpe insulated pvc sheated heavy duty,armoured lt cable with aluminium conductor voltage upto and including 1100 v, 240sqmm, 3.5 core, 2.5 sqmm isi marked frls pvc insulated, single core copper conductor cable, 1.5 sqmm isi marked frls pvc insulated, single core copper conductor cable, laying of one number pvc insulated and sheated/xlpe power cable of 1.1kv grade of size not exceeding 35sqmm direct in ground including excavation, sand cushioning and refilling the trench, tapered bearing 7316 mcb (large), deep groove ball bearing 6311 mcb (small), chain pulley block hoist 5 tonne, 360 rotation, 3mtr lifting height, pipe wrench, 18 inch taparia adjustable heavy duty pipe wrench, pipe wrench, 14 inch taparia adjustable heavy duty pipe wrench, 1/2" sqaure drive flank drive taparia goti 22mm socket set, 1/2" sqaure drive flank drive taparia goti 20mm socket set, rachet wrench, 18 inch single sided rachet wrench, 1/2 inch drill bit for threading di/ci pipe, tata agrico hammer -dfs- 2.5kg, 6 inch tyton epdm/sbr rubber gasket for 150mm di pipe conforming to is:5382 isi mark, 4 inch tyton epdm/sbr rubber gasket for 100mm di pipe conforming to is:5382 isi mark, 6 inch di end cap flanged type for 150mm di pipe, 4 inch di end cap flanged type for 100mm di pipe, epdm rubber gasket for non-return valve, earthwork in excavation in foundation (as per i.s. 3114/1965 for laying of different types & sizes of pipes) so as to give one meter average cover over the the socket of pipe with disposal of excavated earth within initial lead lift as per specification & direction of e/i (k-7 150mm), earthwork in excavation in foundation (as per i.s. 3114/1965 for laying of different types & sizes of pipes) so as to give one meter average cover over the the socket of pipe with disposal of excavated earth within initial lead lift as per specification & direction of e/i (k-7 100mm), earthwork in excavation in foundation (as per i.s. 3114/1965 for laying of different types & sizes of pipes) so as to give one meter average cover over the the socket of pipe with disposal of excavated earth within initial lead lift as per specification & direction of e/i (k-7 100mm repair), earth filling in foundaion trenches and plinth in layers not exceding 150 mm thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation of foundation trenches wit

CTN :45631517

10 Jul, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For mechanical maintenance of equipments in converter shop, hmdp, lp bay,scrap yard and slag yard in sms-2- preventive maintenance of oxygen lance system in sms #2, preventive maintenance of tilt drive system charging and taping doors of converter in sms #2, preventive maintenance of slag cut off dev in sms #2, preventive maintenance of relining car and allied lining equipment, periodic inspection and testing of oxygen lance mechanism of converter in sms #2, periodic inspection of converter tilt drive sms#2 and attending minor points, preventive maintenance of hmdp equipment, preventive maintenance of equipment in aro rinsing station in converter shop of sms #2, preventive maintenance of slag pot transfi car in sms #2, preventive maintenance of scrap box trans car in sms 2, , preventive maintenance of ladle tilter, replacement of lance body, repair of lance body, shifting jam cutting, patch pipe welding and other minor repairs of lance assemblies in sms 2., replacement of oxygen/water hose of lance, replacement of carriage gear box, rope drum pulleys etc in lance drive mechanism slag cut off device of sms #2., repair and replacement of slag skirt segments in converters of sms #2, repair and replacement of radial heat shields on drive side and non drive side of converter in sms #2, repair and replacement brick retainer plates, tap hole dummy flanges providing anchors etc in converters of sms#2, repair of bottom rinsing system pipes tuers, hoses supporting structure etc in converters of sms #2, replacement of converter shell tap hole barrel shells of scrap chutes, ladle shells etc in sms #2, repair of slag pots in sms #2 by welding, replacement of gear boxes up to 350 kg weight in bulk material charging system of sms, replacement of gear boxes of 351 kg to 850 kg weight in bulk material charging system of sms #2, replacement of damaged parts and alignment of fluid coupling co 62a/co 67 a/co65a conveyors, replacement of pulley assemblies of sizes up to 500 mm in belt conveyors in sms #2, replacement of pulley assemblies of sizes 600 mm and above in belt conveyors in sms #2, repair of chutes replacement of steel chute liners etc in conveyor system, replacement of rubber or poly profane liners, replacement of pneumatic cylinders of clam shell gates.gas flaps.compensators and diversion gates etc of bulk material charging system of sms 2, replacement of damaged chutes (other than conveyor chutes) of bulk material and ferro alloy charging system of sms #2, replacement of assemblies like, pneumatically operated diversion gate/gas flap gas lock valve etc ein bulk material charging system of sms#2", replacement of gear boxes in sptchmdp car in sms #2, replacement of wheel assembly in sptc/hmdp car of sms #2, replacement of gear boxes in stc/platform car/hot metal ladle transfer cars of sms #2, replacement of wheel assemblies in stc-platform car hot metal ladle transfer cars of sms #2, replacement of rails in converter section of sms#2, repair of steel teeming ladle hot metal ladle in sms #2 before relining, carrying out miscellaneous mechanical maintennace jobs of type lin converter section of sms #2, carrying out miscellaneous mechanical maintennace jobs of type z in converter section of sms #2, carrying out miscellaneous mechanikal maintennace jobs of type 3 in converter section of sms #2, perkidic inspection of equipments in converter shop, isbh, slag yard, scrap yard and lp bay in sms#2, repair and replacement of technological structures in converter section of sms #2, requir and replacement of auto coupler fixing bracket in steel terming ladles, carrying out steam parging in ladle driers/heaters of sms 2

Central Government And Public Sector

CTN :45637695

29 Jun, 2026 NA

Multi City - Chhattisgarh

Tender For auction sale of rolling stock - condemned coach as per below details. remarks - 1) condemned coach to be sold without excluded fittings as per crse/secr/bsp's letter no. mech/hq /010/010/warranty dated 23/09/2021; complete trolley along with complete wheel sets with all brake rigging fittings and bmbc, centre pivot pin, dv complete, bronze piece and electrical items i.e. alternator, pulley, fan, tube lights, rr box, battery to be recovered from purchaser. 2) coach to be sold on ""as is where is"" basis & delivered in numbers 3) after disposal of all cut off materials, cutting area to be cleaned by the purchaser. 4) left over cut pieces copper & aluminum wire, switches and other small electrical fittings are to be handed over to purchaser. 5) left over cut pieces, copper, aluminum or stainless steel strips on snack table, lp sheet panel or in else where attached on various places of coach fitting is to be handed over to purchaser.

Central Government And Public Sector

CTN :45637696

29 Jun, 2026 NA

Multi City - Chhattisgarh

Tender For auction sale of rolling stock - condemned coaches as per below details. remarks - 1) condemned coach to be sold without excluded fittings as per crse/secr/bsp's letter no. mech/hq /010/010/warranty dated 23/09/2021; complete trolley along with complete wheel sets with all brake rigging fittings and bmbc, centre pivot pin, dv complete, bronze piece and electrical items i.e. alternator, pulley, fan, tube lights, rr box, battery to be recovered from purchaser. 2) coaches to be sold on ""as is where is"" basis & will be delivered in numbers. 3) after disposal of all cut off materials, cutting area to be cleaned by the purchaser. 4) left over cut pieces copper & aluminum wire, switches and other small electrical fittings are to be handed over to purchaser. 5) left over cut pieces, copper, aluminum or stainless steel strips on snack table, lp sheet panel or in else where attached on various places of coach fitting are to be handed over to purchaser.

Central Government And Public Sector

CTN :45637697

29 Jun, 2026 NA

Multi City - Chhattisgarh

Tender For auction sale of rolling stock - condemned coaches as per below details. remarks - 1) condemned coach to be sold without excluded fittings as per crse/secr/bsp's letter no. mech/hq /010/010/warranty dated 23/09/2021; complete trolley along with complete wheel sets with all brake rigging fittings and bmbc, centre pivot pin, dv complete, bronze piece and electrical items i.e. alternator, pulley, fan, tube lights, rr box, battery to be recovered from purchaser. 2) coaches to be sold on ""as is where is"" basis & will be delivered in numbers. 3) after disposal of all cut off materials, cutting area to be cleaned by the purchaser. 4) left over cut pieces copper & aluminum wire, switches and other small electrical fittings are to be handed over to purchaser. 5) left over cut pieces, copper, aluminum or stainless steel strips on snack table, lp sheet panel or in else where attached on various places of coach fitting are to be handed over to purchaser.

Alternator Pulley Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector

Central Government And Public Sector

Central Government And Public Sector