Latest aluminium bar Tenders | Government aluminium bar Tenders

Central Government/Public Sector

CTN :45604809

07 Jul, 2026 NA

Mumbai - Maharashtra

Tender For corrigendum : supply and end termination of over load current protection system along with full end termination suitable for overload and short circuit protection along with miniature circuit breaker distribution board with eight way mcb capacity 415 with busbar rating 200a v, c type rated sc capacity 10ka confirming tois: 13032:1991 latest with housing powder coating siemens grey-7035 with bimetallic terminal connector suitable for 16 dia aluminium tubular busbar for 32a copper palm copper cu etp cw 0041a and aluminium barrel aluminium al 99.5 cable connector temperature resilience, corrosion resistance size: 16 sqmm confirming to is: 5561-1970 with maximum temperature rise of 90 degree celsius. material shall be confirmed todesignation a6 of is: 617-1959. breaking resistance for barrel 85 n/m sq m and for palm 225 n/m sq m with stretching a5% for barrel must be for palm 16. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45732202

04 Jul, 2026 NA

Mumbai - Maharashtra

Tender For supply, termination installation, testing and commissioning of ventilation system in paint shop of lower parel workshop along with complete installation of industrial air blower with movable trolley, operating voltage 190v ac to 380 v ac, 50 hz, single/three phase supply, maximum power consumption shall be less than 600 watt, maximum speed of 400 rpm, air flow of 700 meter cube per minute, weight shallbe less than 60 kg and noise shall be less than 50db. size of blower shall not be more than 1500 mm diameter confirming to is 6272-1987 or latest all electrical works shall be carried out in accordance with the provision of indian electricity act 2003 and indian electricity rules 1956 amended to date and all the safety codes and procedures outlined in the safety codes shall be complied with general and safety requirement shall be governed by is 13947 (pt 1) 1993 and is:8623/1993, amended to date. termination of all cables shall be done with bimetallic terminal connector suitable for 2.5 dia aluminium tubular busbar for 20a copper palm copper cu etp cw 0041a and aluminium barrel aluminium al 99.5 cable connector temperature resilience, corrosion resistance size: 2.5 sqmm confirming to is: 5561-1970 with maximum temperature rise of 90 degree celsius. materiat shall be confirmed to designation a6 of is: 617-1959. breaking resistance for barrel 85 n/m sq m and for palm 225 n/m sq m with stretching a5% for barrel must be for palm 2.5. type test certificate from nabl or any other govt. agency lab report shall be attached along with the offer without which offer will be rejected. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45737409

08 Jul, 2026 NA

Mumbai - Maharashtra

Tender For supply of bimetallic terminal connector suitable for 25 mm dia, aluminium tubular bus bar to terminal pad of 3.3 kv isolator/ct with copper palm copper cu etp cw004l and aluminium barrel aluminium al 99.5cable connector temperature resilience, corrosion resistance confirming to is: 5561-1970 with maximum temperature rise of 90 degree elsius. material shall be confirmed to designation a6 of is: 61 7-1959. breakingresistance for barrel 85 n/m sq m and for palm 225 n/m sq m with stretching a5% for barrel must be for palm 35. (nabl certificate shall be submitted along with the offer) [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45743942

07 Jul, 2026 NA

Mumbai - Maharashtra

Tender For supply and end termination of over load current protection system along with full end termination suitable for overload and short circuit protection along with miniature circuit breaker distribution board with eight way mcb capacity 415 with busbar rating 200a v, c type rated sc capacity 10ka confirming tois: 13032:1991 latest with housing powder coating siemens grey-7035 with bimetallic terminal connector suitable for 16 dia aluminium tubular busbar for 32a copper palm copper cu etp cw 0041a and aluminium barrel aluminium al 99.5 cable connector temperature resilience, corrosion resistance size: 16 sqmm confirming to is: 5561-1970 with maximum temperature rise of 90 degree celsius. material shall be confirmed todesignation a6 of is: 617-1959. breaking resistance for barrel 85 n/m sq m and for palm 225 n/m sq m with stretching a5% for barrel must be for palm 16. [ warranty period: 30 months after the date of delivery ] ]

CTN :45720703

30 Jul, 2026 2.00 Crore

Chhatarpur - Madhya Pradesh

Tender For inviting rates of different items for construction of diffrent type of work as per demand on cm help line or ward parsad or public - supply of handpump material 2026-27, excavation for roadwork in soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location with all lifts and lead up to 1000 m as per section-300 of the specifications.item no nvi-3.12, construction of embankment/sub-grade/earthen shoulders with material obtained from other sources, as per provisions of section 305 of the specifications, with approved materials/soil confirming to requirements given in table 301-1 of specifications including all lead and lifts, including cost of watering, compaction by vibratory roller/heavy pneumatic type roller etc. confirming to requirements given in table 301 2 of the specifications complete.item no nvi-3.12, construction of granular sub-base, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method at omc and compacting with vibratory roller of 80-100 kn static weight to achieve the desired density, including all lifts and lead complete in all respect as per section-400 of the specifications.by mix in place method item no nvi -4.1.1.1, construction of dry lean cement concrete sub- base over a prepared sub-grade with coarse and fine aggregate conforming to is: 383, the size of coarse aggregate not exceeding 26.5mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1 of the specifications, cement content not to be less than 150 kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in a batching plant, transported to site, laid with paver with electronic sensor/mechanical paver, compacting with 8-10 tonnes vibratory roller, finishing and curing and as per section 601 of specifications.item no nvi- 6.1.1, providing and laying cement concrete grade m-20 with 20 mm graded crushed stone aggregate, mixing shall be in mechanical mixer, laying with paver compacting by use of pin, plate / screed vibrators including form work by strong steel girders fixed by spikes, separation membrane 125 micron thick, including cutting of joints @ 4 to 5 m interval and filling it with hot applied bituminous sealant (without dowel bars) (max. thickness 20 cm).item no nvi-6.4, construction of dowel jointed, plain cement concrete pavement in m-30 grade concrete over a prepared sub base with 43 or higher grade cement, coarse and fine aggregate conforming to is:383 maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver with electronic sensor spreading the concrete by shovels, rakes compacted using needle, screed and plate vibrator and finished in a continuous operation including provision of contraction, expansion, and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, placing of dowel bar, tie rod admixtures as approved, curing compound, finishing to lines and grades as per approved drawings as per irc:15 and as per section-602 of the specifications complete excluding cost of steel in dowel bar and tie rod etc.item no nvi-6.2.1, earth work in excavation for foundation, trenches for pipes / cables or drains etc. by mechanical means / manual means (exceeding 30cm in depth.) including ramming of bottom,dressing of sides,disposal of excavated earth including of all lift and lead upto 50m.disposed earth to be levelled and neatly dressed.all kinds of soil item no nii 2.6.1, demolishing cement concrete manually/by mechanical means including disposal of material with in 50 meters lead as per direction of engineer-in-charge.1:3:6 or richer mixitem no nii

Central Government/Public Sector

CTN :45709820

20 Jul, 2026 NA

Veraval - Gujarat

Tender For supply of aluminium barrel tower bolt of dia d=10mm, size 150mm, confirming to is:204 (part 2)-1992 (5th revision) with amendment-3 of jan.-2008,type-4. [ warranty period: 30 months after the date of delivery ] ]

State Government

CTN :45684603

06 Jul, 2026 NA

Haringhata - West Bengal

Tender For rate quoted for mgnrega work various material under haringhata block - rate quoted for mgnrega work various material under haringhata block, 1 st picked class brick, 1 st class brick, 1st class brick bats ( size as direction of eic)., silver sand, fine sand, medium sand, course sand, portland cement, brick aggregrates (single size) 40 mm normal size., stone aggregrates (single size) 40 mm normal size. (without carriage), stone aggregrates (single size) 20 mm normal size.(without carriage), stone aggregrates (single size) 10 mm normal size.(without carriage), stone aggregrates (single size) 5.6 mm normal size.(without carriage), stone aggregrates 13.2 mm nominal size. (without carriage), stone aggregrates 11.2 mm nominal size. (without carriage), 22.4 mm machine made chips (without carriage)., jhama metal kiln burnt. ( size as direction of eic)., thermocol 12.5 mm thick., polythene sheet (150 gm per sqm), hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, hire charge of shuttering plank(without prop )(25mm-30 mm), hire charge of shuttering plank(with prop )(25mm-30 mm), hire charge of shuttering plank( with prop (30mm 37 mm ), vibrator (needle type 40 mm), steel material- tor steel rods/hysd bars/tmt bars(sail/tata/rinl) (fe415/fe500/fe500d,conforms to is 1786), steel material- tor steel rods/hysd bars/tmt bars(jsw/jspl/shyam/srmb/ssl/bmasl/electro steel)(fe415/fe500/fe500d,conforms to is 1786), ms ornamental grill (above 10 kg/sq.m up to 16 kg/sq.m, nail, 1220. wire mesh (rabbit), glue, 3050. galvanised steel corrugated sheets, 1023. galvanised steel j or l hooks 8 mm dia, galvanised steel bolt & nuts 6 mm dia and 25 mm long round head with slots, g.i lime washere, bitumen washer, stainless steel bolts/ square bar and plates, unslaked lime, supply of first aid box including medicines (specified by pia) at site., display board(ibs), display board(ibs), g.i. wire, coconut rope, sal ballah (10 cm ), sal ballah ( 125 mm ), sal ballah (15 cm ), cement primer(interior), cement primer(exterior), primer( for wood), cement based dust putty, black japan paint, enamel paint for steel grill, synthetic enemel paint in black or chocolate shade., woodwork for door and window frame malayashia sal, panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position butexcluding the cost of hinge and other fittings.(ii) 40mm thick shutters with 19mm thick panel of size 30 to 45 cm.(b) sishu, gamar, champ,badam,bhola, mogra, hallak., supplying, fitting & fixing factory made p.v.c. door frame of size 50 mmx47 mm with a wall thickness of 5 mm, made out of extruded 5 mm, pvc sheet miter, coloured orissa pattern w.c. pan 580x440 mm, vitreous china pedestal for wash basin, vitreous china foot rests 250x125x25 mm, ptmt - liquid soap container of 400 ml capacity, ptmt - towel rail (600 mm), ptmt - soap dish/holder 138x102x75 mm, fan hook, r.c.c. ventilator, vitrified floor tile 60x60 cm, turpentine oil, vitreous china flat back wash basin 450x300 mm, r.c.c. pipes np2 class 450 mm dia, r.c.c. pipes np2 class 300 mm dia, supplying, fitting & fixing 30 mm thick both side prelaminated factory made solid panel pvc door shutter consisting of outer frame made out of m.s. tubes of 19 gauge thickness and size 19 mmx19 mm for styles, top and bottom rails, m.s. frame shall have cost of steel primers of approved make, supplying, fitting and fixing m.s. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (cost of concrete will be paid separately) (a) 40mm x 6mm, 250mm length, anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to i.s. specification (i.s. 205/66) and fitted and fixed with cadmium plated screws: (vii) 100 x 75 x 4.0mm, anodised aluminium barrel / tower / socket

Central Government/Public Sector

CTN :45467327

04 Jul, 2026 NA

Bangalore - Karnataka

Tender For corrigendum : supply of aluminium bar-ams 4132 dia150+ /-4mm , aluminium bar-au2gn dia 200+ /- 6 mm

CTN :45688894

16 Jul, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For supply of supply of precleaner for air cleaner , connection , o ring for moatti lub oil filter , injector nozzle assembly , zinc rod , 1/8 bsp drain cock , plate covering , valve grinding paste (901702) , joint , lub.oil pressure sensor with switch , set bolt - m12x1.75x50 - 8.8 , set bolt-m16x2x50 - 8.8 , set screw m10x1.5x35-8.8 , stud , socket head grub screw - m10x10 , slotted c sunk head screw -m6x , circlip , banjo bolt-m14x1.5 , washer spring , clip jubilee for strainer , connection piece to turbocharger , flexible hose , temp.indicator 0 50 degc. , glass fuse 300ma size 5x20 fast blow , set of 10 , fuse 1a , iso1 electrodistributor , 24vdc , solenoid return , fuse 2a , fuse 6a , se card , m.e bearings scanner exhaust gas temp , on release safety card rgm card , logic unit and , programmable output(0-20) , indicating lamp-red , with lens , holder and lamp , indicating lamp-white with lens , holder and lamp , fuse cartridge 4a(am)10x38 , watershed connection , plunger barrel assembly (dia 25 mod) , o ring 4 x22.5 perbunan , o ring , o ring (for liner collar) , temp.switch(model ti-250-s)95deg 10m capilla , pressure transmitter , pr. transmitter 0-10 bar , gfl bolts , low lub oil sump level switch , set bolt -m20x2.5x120-8.8 , set scrw -m20x2.5x40-8.8 , stud m12x1.75x45-8.8 , self locking nut , allen screw , screw , socket head cap screw-m12x25-12.9 , socket head cap screw -12x40-12.9 , socket head cap screw-m12x55-12.9 , circlip , circlip external -60mm , banjo bolt - m22x1.5 , washer copper , copper washer , copper washer(33x39) , mech dir pin , spring dowel pin , spring dowel , lock washer pair , plain bearing with bearing bush , thrust ring , locating ring , ring nut , intermediate ring , sealing disc , contact no , pressure gauge 0-4bar dial 4 bourden ss3 , analog indicator 72x72.0-4bar i p4-20m , pressure transmitter , range 0-6bar , pressure switch , set at2.0b , pf-3p4-w-bb-1x00-21b-10b-db-n-v.t , solenoid valve nc 24vdc(y94 , y97 , y142.y143 , y) , high signal selector (or module) , solenoid valve no.24 vdc (y198) , safety stop , pressure guage with glycerine , i/p-0-10 bar , pressure transmitter 0-4 bar 24vdc o/p-4-20 ma , pressure transmitter 10 bar 24vdc o/p-4-20 ma , pressure guage with glycerine , i/p-0-6 bar , selector plate (opening 1 , 3 , 5) , pressure transmitter 6 bar 24vdc o/p-4-20 ma , pneumatic distributor (7/1 , 7/2 , 7/3) fuel rack , pressure transmitter 40 bar 24v dc , pneumatic distributor (8/1 , 8/2 , 8/3 , 8/4) stop , pressure regulator (5) , on/off switch , 2 pole , off delay timer 0.2-300sec.+socket , converter module(t452 , t458)charging airtemp.f.w.temp.(0-100) , supply card , ae 24/24 , sleeve nt-hh-pn10-dn100 , damper key , spring pack(new) , o ring 8.2x680.6 (nitrile) , o ring , o ring , bush(32307) , bush(32301) , signal isolator 4-20 ma/4-20ma loop powered , bearing temp measure card (mtp card) , bearing temp alarm card (aip card) , regr. safeties temp. card (rsp card) , on release safety icm1 card , frequency divider for governor speed sensor , a.b.b t/c magnetic speed sen , solenoid valve cnomo dia-1.6 , 24 vdc , regulator for fw temp. , 24vdc , i/p-rtd , o/p-4-20 ma , green head for push button , blue head for push button , on delay relay 24v dc , threshold module , rgm card , frequency divider-turbo speed , cable (engine speed measure) , pneumatic switch for local/remote operation , selector plate (solid) , selector seal , sub base seal , pilot push in type , fresh water air cooler inlet connection , fresh water pre heating inlet connection , fuel rack indicator , pressure gauge 0-6 bars , pr. switch 1.2bar min. , pr. switch , 4140-c-k-1-e-22-aa0 , 4.1b , pr switch type 4140c-19 bar , pressure transmitter p5r-6bar-4-20-1/2-pe , pressure transmitter p5r 0-40 bar , mss module 0-150 deg(convertor) , temp switch tcm96p 40deg c decreasing , temp switch tcm96r 90deg c increasing , temp switch tcm96r 95deg c increasing , pressure transducer 0-10 bars , mss module 0-100deg.c 4-20 temp con

CTN :45674269

04 Jul, 2026 NA

Tawang - Arunachal Pradesh

Tender For supply of health faucet (q3) , copper alloy taps/stop valves (v2) conforming to is 8931 (q3) , plastic bib taps, pillar taps, angle valves & stop valves for hot & cold water services conforming to is 9763 (q3) , towel rail (q3) , plastic seats and covers for water - closets as per is 2548 (q3) , pvc three layer water storage tank 500 ltrs , wall mixer cp 3 way 15 mm , pvc three layer water storage tank 1000 ltrs , kitchen sink with out drain board , centre hole basin mixture cp 15 mm , pvc low level flushing cistern 10 ltr , western toilet european pattern , kitchen rack stainless steel 36 inch by 24 inch , sink mixture cp 15 mm , pvc pipe 110 mm bore , wc orissa pattern viterous china 450 by 350 mm , bib cock brass 15 mm , glass shelf 6 mm thick with cp railing , ppr pipe 25 mm , hand wash basin viterous china glazed , ppr pipe 20 mm outer diameter , 15mm brass fancy tap cp bib tap 15mm , looking mirror cabinet type 450 by 300 mm , ppr gate valve 20 mm , hydraulic door closer , angle valve , powder coating bib tap , toilet paper holder cp , pvc waste pipe flexible type 32 mm and 600 mm long , urinal pot viterous flat back , pvc bend 110 mm bore , pvc connection pipe 15 by 600 mm , basin mixtuer assembly cp , ppr union 15mm , ppr gate valve 15mm , 15mm brass fancy tap angle valve , ppr union 20 mm , ppr elbow 20 mm , door wall hook rail set peg set 3 pin , plywood bwr 8 ft by 4 ft by 8 mm , stainless steel curtain rails 4mtr each , plywood bwr 8 ft by 4 ft by 4 mm , pvc three layer water storage tank 300 ltrs , lever type flushing cisten single flush system 10 ltr , ppr gate valve 25 mm , elbow gi 15 mm , door stopper aluminium , ppr 25mm tank socket , cp waste coupling 32 mm , tee equal gi 15 mm , helical door spring , pvc shelf 450 by 200 mm , ppr socket 15mm , ppr elbow 15 mm , nipple gi 15 by 100 mm , 2 way bib cock cp , aluminium sliding bolt 250 mm long , socket gi 15 mm , gi bend 15 mm , stop cock cp brass 15 mm , towel ring cp , ppr tank socket 20 mm , plywood bwr 8 ft by 4 ft by 6 mm , union gi 20 mm , pvc connector 110 mm bore , ppr socket 25 mm , bib cock aassembly cp , ms butt hinges 100 mm , door wall hook rail set , ppr socket 20 mm , pvc towel rail 600 mm , looking mirror 5 mm , ppr tank socket 15mm , shower cp 100 mm with rod , pvc soap dish , white cement , flushing handle suitable for 10 ltrs cistern , pvc over head shower with arm , jet spray cp 15 mm , tee gi 15mm , pvc waste coupling 32 mm , aluminium anodised handle 100 mm , excel acrylic emulsion terracoda , ppr pipe 25 mm dia 3 layer with socket , pvc bend for cistern , ppr union socket 50 mm , ppr gate valve 50 mm , tee gi red 20 by 20 by 15mm , pvc stop cock 20 mm , synthetic enamel paint white colour , union gi 15 mm , ppr union socket 25mm , ppr pipe 40 mm dia 3 layer with socket , tee gi 20 mm , socket gi reducer 15 by 20 mm , pvc pillar tap 15 mm , connection pipe wired 600mm , m seal 100 gms , elbow gi 20 mm , teflon tape 19mm , syphon kit for flushing cistern , nails 3 inch 75mm , ppr pipe clamp 20 mm dia , ppr union socket 40 mm , ppr pipe 32 mm dia 3 layer with socket , pvc tee 110 mm , ppr union socket 32 mm , gi union socket 25mm , tank socket gi 15 mm , aluminium barrel tower bolt 75 mm , u clamp 20mm dia , symphon kit for dual flushing cystern , pvc grating round type 140 mm , ppr elbow 90 degree 50mm , aluminium barrel tower bolt 100 mm , glazing putty oil glazed , gi socket 50mm , ppr reducing tee 40 by 25mm , pvc bend 75 mm , tank socket gi 20 mm , gi socket 25 mm , ppr elbow 90 degree 32mm , ppr brass l 20mm , ppr brass t 20mm , ppr t 20mm , ppr union 25 mm , plywood bwr 8 ft by 4 ft by 12 mm , plywood bwr with 3 ply 8 ft by 4 ft by 16 mm , foam sheet 6 ft by 3 ft by 75 mm , plywood bwr 8 ft by 4 ft by 6mm , plywood bwr 8 ft by 4 ft by 3mm , plywood bwr 8 ft by 4 ft by 4mm , plywood bwr 7 ft by 3 ft by 12 mm , foam cushion 530 by 530 mm , prelaminated mdf board 8 ft by 4 ft by 12mm , ply wood commercial one side teak face 9 ft

Aluminium Bar Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector