Latest aluminium busbar Tenders | Government aluminium busbar Tenders

Central Government/Public Sector

CTN :45713835

18 Jul, 2026 30.00 Lacs

Mumbai - Maharashtra

Tender For repair/replacement of external electric supply distribution network with other connected items at malad, marve and kandivali under ge (n) santacruz, mumbai - supply, install, testing & commissioning pedestal cubical type double door lt bus bar chamber box of suitable size factory made modular construction fabricated out of 3 mm thick crca sheet, angle iron, channels, epoxy powder coated to give a superior finish , outdoor type , totally enclosed dust & vermin proof with locking arrangements front & back side opening system including rain shed, busbar chamber should be suitable for accomodating all aluminium bus bar strips (50mm x 10mm x 04 nos) & gi strip for earth fixed on porcelain insulators, and one independent metering module suitable for accomodating three phase volt meters & ammeter digital type, indicator lamps, cable entry/exits cut outs at bottom part, with fixing arrangement on pcc (1:3:6) type c-2 bed block with studs, bolts, nuts & washers, danger notice board with scull suitable for 415 volts or required size to be fixed on pannel including dismantling of old bus bar panel all as specified and directed by engr-in charge.notes:-(a) aluminium bus bar duly covered with colour coded shrinkable sleeves of required size for phases and neutral - 01 set(b) mccb 4 pole , ics=100%icu- 25 ka, 415 volts, 100 amps , with thermal adjustable and fixed magnetic setting with extended terminals -02 nos.(c) digital multifunction meter of size 96x96 mm to measure current, voltage, frequency and power factor with built in selector switch and programable ct of appropriate ratio.-01 no make- imp/automatic electrical(ae)/ l&t / havells/ meco(d) panel indicating lamp neon/led type (red ,yellow & blue) with lamp holders - 03 nos(e) panel instrumental wiring with frls suitable size but not less than 2.5 sqmm copper wire single core - 01 job(f) necessary sizes of lugs for fixing of cables in bus bar deemded to be included rate quoted by the contractor.make of mccb & mcb: larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 36 ka 400 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb, all as specified and directed by engr-in-charge. make:- larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 36 ka 160 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb, all as specified and directed by engr-in-charge. make:-larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 16 ka 100 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb, all as specified and directed by engr-in-charge. make:-larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 36 ka 250 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb all as specified and directed by engr-in-charge make:-larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supplying, laying,connecting, testing & commissioning lt ug pvc insulated, heavy duty, 1100 v grade electric cable with aluminium conductor of size 16 sqmm x 4 core, laid in trenches or passing through pipe or fixed to wall, making all connections with and including provision of necessary glands, lugs, bushing etc as required including taking down old unserviceable cable complete all as specified and as directed by engineer-in-charge of following sizes:-note : earthwork excavation, dwc

Central Government/Public Sector

CTN :45714895

18 Jul, 2026 NA

Pune - Maharashtra

Tender For special repairs to lt panels and connected items at pyro, pinaka, nag mixture building, magazine area and ap building in hemrl, pune - taking out old serviceable/unserviceable lt panel/capacitor panel of any description or capacity keeping aside in safe custody for schedule of credit complete all as specified and directed, supply, fixing and commissioning of cpri approved factory made lt cubicle panel board outdoor type conforming to is/iec-61439-1&2 : 2011 with canopy, louvers & shutters made out of 3.15 mm thick crca sheet totally enclosed with necessary ventilations, weather, dust and vermin proof with front and rear opeing and lcoking arrangement, degree of protection ip 56, 415 volts, 3 phase, 4 wire, 50 hz having aluminium bus bar of capacity 1200 amps tpn duly colour coded and for neutral supported with dmc/smc insulator colour coded with heat shrinkable sleeve having short circuit current with minimum 65 ka for one second and suitable for internal connection including instantaneous over load and earth fault relays complete with digial type voltmeter and ammeter inclduing suitable range of cts of metering, selector switches for voltmeter and ammeter, set of three led type indicating lamps duly wired with suitable size of copper cables and panel board shall be grouted in the ground with suitable size of foundation in pcc 1:2:4 type b1, ms channels 50 x50 x 6mm with nut bolts, wahsers, etc. suitable for fixing with bus duct including comprising of the following:-incoming: (a) acb adjustable type with thermal magnetic release 4 pole, 800a, 415v, 50 ka, 50 hz - 01 no. outgoing: (b) mccb 4p, 400 amps, 36 ka,415v, ac supply including extended rotary handle and spreader terminals fo incoming and outgoing - 03 nos, (c) mccb 4p, 125 amps, 25 ka,415v, ac supply including extended rotary handle and spreader terminals fo incoming and outgoing - 01 nos, (d) panel mounted type digital multifunctional energy meter a, v,z, kw, pf t operated, lt 3 phase, 4 wire inclding ct ratio 200/5 - 04 nos, (e) control mcb c curve, sp, 6 to 32a, 10ka, c curve - 02 nos, (f) led phase indicator (r,y & b) - 01 set. (pyro sub stn), supply, fixing and commissioning of cpri approved factory made lt cubicle panel board outdoor type conforming to is/iec-61439-1&2 : 2011 with canopy, louvers & shutters made out of 3.15 mm thick crca sheet totally enclosed with necessary ventilations, weather, dust and vermin proof with front and rear opeing and lcoking arrangement, degree of protection ip 56, 415 volts, 3 phase, 4 wire, 50 hz having aluminium bus bar of capacity 1200 amps tpn duly colour coded and for neutral supported with dmc/smc insulator colour coded with heat shrinkable sleeve having short circuit current with minimum 65 ka for one second and suitable for internal connection including instantaneous over load and earth fault relays complete with digial type voltmeter and ammeter inclduing suitable range of cts of metering, selector switches for voltmeter and ammeter, set of three led type indicating lamps duly wired with suitable size of copper cables and panel board shall be grouted in the ground with suitable size of foundation in pcc 1:2:4 type b1, ms channels 50 x50 x 6mm with nut bolts, wahsers, etc. suitable for fixing with bus duct including comprising of the following:-incoming: (a) acb adjustable type with thermal magnetic release 4 pole, 800a, 415v, 50 ka, 50 hz - 01 no. outgoing: (b) mccb 4p, 400 amps, 36 ka,415v, ac supply including extended rotary handle and spreader terminals fo incoming and outgoing - 01 nos, (c) mccb 4p, 315 amps, 25 ka,415v, ac supply including extended rotary handle and spreader terminals fo incoming and outgoing - 01 nos, (d) mccb 4p, 250 amps, 25 ka,415v, ac supply including extended rotary handle and spreader terminals fo incoming and outgoing - 02 nos (e) panel mounted type digital multifunctional energy meter a, v,z, kw, pf t operated, lt 3 phase, 4 wire inclding ct ratio 800/5 - 04 nos, (e) con

CTN :45178236

02 Jul, 2026 5.33 Lacs

Jammu - Jammu And Kashmir

Tender For bid to ras supply of fabrication and construction of copper plate earthing details of electrodes and earth pit at hpt tv site gurez, jammu and kashmir. , interconnecting earth electrodes with providing, fabrication and fixing of 50mmx3mm copper strip at hpt tv site gurez, jammu and kashmir. , copper strip laying for extension of earthing system up to the xtr hall, ups and lt panel and terminating in bus bar by digging the soil and placing the copper strip along the trenches at hpt tv gurez , providing of 375x38x6mm copper bus bar with insulators and steel nut bolts and the fixing of 375x38x6mm copper bus bar is to be done to terminate the different earthing system at hpt tv gurez, jandk , providing and fixing of nomenclature sign marker for earth pits at hpt tv site gurez, jammu and kashmir. ) /bid number : gem/2026/b/7514498 * /dated: 13-05-2026 & & / bid document 1 / 18

CTN :45703815

11 Jul, 2026 6.00 Lacs

Kheri - Uttar Pradesh

Tender For supply of general electric items b b - wire 22swg , glass sleev 14 mm , slip ring for cane unloader bbl make 10 kw motor , exhaust fan 24 , plastic cooling fan for 5 00 hp motor , plastic cooling fan for 7 5 hp motor , plastic cooling fan for 10 hp motor , havells make auto cut hot air blower 2000 watt with overheat protection , soldering iron 65 watt , soldring wire , plastic cooling fan for 50 hp motor , teflon rod dia 65mm length 300mm , glass sleev 16 mm , mash rum type push button red , mash rum type push button blue , plastic cooling fan for 15 hp motor , carbon brush 12 20 32 , mettalic carbon brush 20 15 8 , carbon brush 30 20 100 , timer st 800 , carbon brush 21 31 37 , porcelean kit kat200 amp 415 v standard make , fuse wire 6 amp , fuse wire 10 amp , fuse wire 16 amp , dol starter empty box mk1 , dol starter empty box ml2 , exhaust fan 16 1 phase 960rpm ci body crompton havells make , carbon brush 20 32 40 , rocker arm 12 5 hp kec slip ring motor , h t connector 3 way , h t connector 6 way , potentio meter 500 ohm 2 w 10 turn bourns make , diode 6 amp , step down double phase transformer 415 vac to 24vdc , usha bajaj make room heater with ss reflector and body , dc solenoid coil for hydraulic grab for reverse forward direction , ss seamless ring size 1 for cane unloader , karam make industrial safety belt , silk rope 3 4 resham , foldable aluminium ladder 16 ft , amp meter 400 5 96 96 , amp meter 0 100 5 96 96 , amp meter 150 5 96 96 , limit switch 1 no 1 nc type ls 011 10 amp 500 v , frequency meter 96 96 , frequency meter digital type , air cooled resistance box for 12 5 hp 15 hp bbl make slipring motor , analog rpm meter make beacon sensor type input magnetic picup no of teeth 06 range 0 8000 rpm , selector switch for volt meter , selector switch for amp meter , volt meter 96 96 0 500 vac ae make , current transformer ct 250 5a , amp meter 300 5 96 96 , amp meter 600 5 96 96 , dyno pack with controller , current transformer ct 300 5a , current transformer ct 400 5a , current transformer ct 600 5a , current transformer ct 500 5a , current transformer ct 100 5a , carbon holder for 12 5 hp slip ring motor cane unloader motor , current transformer ct 500 1 a , amp meter 500 5 96 96 , amp meter 800 5 96 96 , porcelean kit kat 100 amp 415v , amp meter 250 5 96 96 , amp meter 1200 5 96 96 , timer 800 q 1 no 1 nc , portable single phase welding machine 220 vac , current transformer 1200 1 , current transformer 1200 5 , ictpn switch 200 amp , metravi make nctm 200 contact on contact combined digital tacho metermeter , diamond hammer drill bit size 6 mm for aluminium busbar drilling , diamond hammer drill bit size 8 mm for aluminium busbar drilling , diamond hammer drill bit size 10 mm for aluminium busbar drilling , diamond hammer drill bit size-14 mm for aluminium busbar drilling

CTN :45298008

01 Jul, 2026 NA

Parganas - West Bengal

Tender For bid to ras supply of xlpe cable for working voltage up to and including 1.1 kv marked to is 7098 (part 1) (q2) , miniature circuit breakers (mcb) for ac operation marked to is/iec 60898 (part 1) (q2) , supply and fixing on load change over switch ss enclosure complete with capacity 200 amp, 415 volt, 4 pole, 50 hz. , supply and fixing sheet metal enclosure spn db double door having facility to fix mcb spn as incomer and mcbs as outgoing, spn 4 ways, ip-43 , supply and fixing sheet metal enclosure tpn db double door having facility to fix mcb tpn as incommer and mcbs as outgoing tpn 4 ways, ip-43 , supply and fixing bus bar chamber 100 amp, 4 way, 415 volts enclosurre is made from crca sheet of thickness 3.15mm crca sheet cover , supply and fixing of straight through epoxy cable joint kit incl jointing materials making joints of ug electric cable 1100 v grade nominal cross sectional area not exc.50 sqmm, 3.5 by 4 core , supply and fixing straight through epoxy cable joint kit incl jointing materials making joints of ug electric cable 1100 v grade cross sectional area 240 sqmm to 300 sqmm, 3.5 core. , supply and fixing end termination epoxy cable joint kit including jointing materials for making joints of ug electric cable 1100 v grade nominal cross sectional area 240 sqmm to 300 sqmm, 3.5 core , supply and fixing of galvanised iron pipe 100 mm bore dia light grade for protection of ug cable , supply of digging nad layingg in excavation trenches not exc. 1.50 m wide and not exc. 1.50 m in depth, complete all as specified and directed. , returning, filling in including spreading, levelling, watering and well ramming in layers not exc. 250 mm in soft loose soil , supply and fixing of galvanised iron pipe 40 mm bore dia light grade for protection of ug cable , supply, installation, commissioning and testing including providing all necessary electrical connection,lt feeder panel board of size 1.0 m x 0.6 m x ) /bid number : gem/2026/b/7568567 * /dated: 22-05-2026 & & / bid document 1 / 30 & & ' ' /item category 0.5 m , supply, installation, commissioning and testing including providing all necessary electrical connections lt feeder panel board of size 0.6 m x 0.6 m x 0.5 m , supply and fixing earhing complete with gi earth plate electrode of size 600x600x6mm thick.complete all as specified and directed in boq spec file , supply and fixing earhing complete with gi earth plate electrode of size 600x600x6mm thick. complete all as specified and directed in boq spec file , supply and fixing of sub-class b brick, well burnt, laid breadth-wise along the axis of cable laid in trenches over sand cushion laid for ug cable protection, complete all as specified and directed. , supply and fixing horizontal boring under a depth of 0.65 m from the gl for passing pipe upto 40 mm bore dia , supply of digging and laying of removing excavated materials soils not exc. 50 m and depositing where directed at a level not exc.1.50 m , taking down out unserviceable or serviceable lt ug cables of nominal cross-sectional area 300 sqmm including bricks, gi pipes etc. , taking down out unserviceable or serviceable lt ug cables of nominal cross-sectional area 50 sqmm 3.5 core including bricks, gi pipes etc. , supply of digging and laying of sand cushioning dry in trenches for protection of ug cables below, above and around the ug cable laid in trenches of 230 mm spread thickness , cutting road by hard standing and making good disturbed surfaces by using pcc type-c2,1-3-6 by using 40 mm graded stone aggregate , boring of holes under road,pavement,hard standing by trenchless technology using ultra sounding technique including hdpe pipe 150 mm dia suitable for 0.4 mpa working pressure , cutting chases, chipping in making good to facings, where required and pointing in cement mortar 1- 3 to ends or edges of landings, steps, sills, sunshades, shelves, lintels etc. , submain wiring comprising single core 2 runs of 6 sqmm nominal coss sectional area frlh

Central Government And Public Sector

CTN :45704062

06 Jul, 2026 5.16 Lacs

Darbhanga - Bihar

Tender For supply of modernization of distribution infra 2x400 kva substation companybagh b b -dismantling and refurbishing of electrical distribution system , itc of existing load bank with static meter , itc of existing load bank , trimming and pruning of four trees , transportation of one dismantled lt panel darbhanga to mzp , removing of old faulty outlived mv panel , provision of structural iron channels mounting framework for the lt panel , re-furbishment of existing mv panel , brickwork for minor structural alterations near the lt panel support base , straight through joint 185 , straight through joint 50 , removing and relaying of existing cement interlocking bricks , laying of 1.1 kv grade of 35 sqmm to 185 sqmm direct in ground , dressing of cables , finishing of the lt bus bar box , 20w surface-mounted led tube light , a. horizontal type tpn db 8 way with double door , b. horizontal type tpn db 8 way single door , a. vertical type, 415 v, tpn db 8 way double door , dressing of dbs , a. single pole mcb 6 to 32 a , b. four pole isolator 63 a , c. four pole isolator 40 a , d. double pole isolator 40 a , e. tp mcb 63 a , f. 125 a tp mccb 16 ka , 3 pole mccb of 250a, 25 ka , itc of existing lt bus bar box , sitc wall mounted heavy-duty air circulators fans of 600mm metal blades , supplying and fixing of 5mm thick m.s.chequered plates , fixing of ms stand of pac outdoor unit , providing double coat spray painting , sign writting numbering on all panel proper marking of its connectivity , a. wiring for light point group-a , a. copper conductor, single core cable 2 x 1.5 sq. mm , a. medium class pvc conduit 20 mm , shifting re- installation of submersible pump staters , making opening of wall to suit the size of 380 mm sweep exhaust fan , supplying fixing of exhaust fan of 380 mm sweep heavy duty , a. blanking plate , b. 5 pin 15 a socket , c. 15 16 a piano type switch , d. 5 6 a piano type switch , e. 3 pin 5 6 a socket outlet , f. 3 pin 15 a top , g. wall fan , h. down rod for ceiling fan installation 3 ft length hook , a. 100 watt flood light , b. 24 w led rimless surface panel light , sitc of 100 a 3 phase neutral copper bus bar in sheet steel enclosure , dressing of existing distribution system of type ii staff qtr , itc of 100 a 3 phase neutral bus bar with 100 a mccb in sheet steel enclosure , supplying fixing of double pole spn mcb 32 a in the sheet steel enclosure , s l 2 1.5 sqmm copper conductor , removing the faulty lt cable of size 3.5 core 240 sq.mm , ms clamp on four pole structure for fixing the ht cable , extracting of spare main ht cable 11 kv 95 sq mm size from the soil , extracting of faulty spare ht cable 95 sq mm from the duct manual labour , fastners nut bolt, al lugs, socket, cu lugs socket, washers, screw, pvc clips , acrylic sheet of 2 mm thickness , hrc fuse of 200 a //bid details 2 / 49

Central Government/Public Sector

CTN :45509046

06 Jul, 2026 45.00 Lacs

Mathura - Uttar Pradesh

Tender For corrigendum : repair/maintenance and improvement of lt oh line/lt ug cable, lt panel,bus bar panel,lt switch gear including other allied works at mathura cantt under ge (east) mathura

Central Government/Public Sector

CTN :45357784

03 Jul, 2026 44.50 Lacs

Panitola - Assam

Tender For corrigendum : repair/maint of lt electric supply and distribution network including replacement of u/s cable joint kit, bus bar junction box,change over switch and connected items of electric supply at dibrugarh,ganeshbari,chabua, fsd panitola and laipuli area

Corporations And Associations And Others

CTN :45363921

03 Jul, 2026 NA

Gurdaspur - Punjab

Tender For corrigendum : supply of spares for instrumentation - "vfd pannel signal isolatorsr. no. 2306042013 make - multispampower supply ac 230 vi/p - 4 to 20 ma dco/p - 4 to 20 ma dcreguire boiler + mill + boiling house ", ash handling air pneumetic vibrator, pu elbow 1/4" one side thread - 10 mm, pu tee 1/4" one side thread - 10 mm, air filter 1/4" -10 mm, pu femal connector 1/4" - 10 mm, pu pipe-10 mm, sov double action 230 v ac 1/4", quick exhaust valve 1/2" cylinder, quick exhaust valve 1/4" for seal, "simens smart positioner sipart ps26 drs 110-0nn0- 0aa0ip 66/type 4xp- 1.4 to 7 barta- 30 dg c to +80 dg c", "dome power cylinder for ash handling model no. c 0631505sr. no. plt 20815/005 bore size 63mmstroke- 305 mmmake- duncam engineering limited (rnoia)", " turbine asco solonoide valve (red had type)brand ascotype - solonoide valve (electrno megnetic) 110 v dc", "limit switchmod no. lswp -1-02-4-a", "cesar bonettitype directional control valvesize / model- nf2pan 520 n00000", "valve limit switch box/ position monitormodel code klplubtg/16/05-26ingress protection- ip67 certifiedvoltage- 110 vdc", "wiring diagram explanation (013)type- close position switch", "product - cee em-45 limit switch model /type - cee em -45-50brand-jai bala ji", "pressure switch (switzer) model no. gm-201-33-b030-55-apressure range 0.4 to 4 bar", "proxy meter sensorsr. no. 23 h01p90output- 7,87 v/mm (200 mv/mil)w/o- 2456make - bently nevada", "siemens smart positioner sipart . ps26dr5 110-0nn0-0aa0ip 66/type 4xpr 1.4 to 7 barta 30 dgr c to +80 dgr c", "m00g pi servo amplifier ( valve driver)supply voltage - 24 vdccurrent 1 to 2 a", "signal conditioner/ isolatermake- pepperl +fuchs model - kfd2- stc5-1.20type- signal isolator/signal conditioner", boiling house hi tech m/c chennai bag clamping power cylinder with o ring kit, bag clamping rubber pad, limit switch for clamping, "plc omran dc - 12 v to 24 v zen 10 c dr - d- v2", smps (power supply 24 v), relay board channels, contector, controller unipluse f 701-s, pu connectors, male 1/4" - 8 mm, push button element no-nc, air filter regulator (afr) (0-10 bar), afr connectors, "load cell 110 kgmodel- 65023-110k-nc-02x make- vishay", proxy for load bucket, load bucket cylinder with kit o ring make janties, course fine cylinder with o ring kit make janties, sov ( solonoide valve) with base and coil make janties coil 220 v ac, coil only 220 v ac, load cell card hi- tech engineers, half inch ball valve (1/2"), "centrifugal machine (raw and refinery) afr (air filter regulator )connector femel - 3/8"" make janties ", "break limit switch make bch electric limited", solenoide valve (sov) single acting single coil with o ring kit, double acting double coil with coil 230 v ac and o ring kit, double acting single coil with coil 230 v ac and o ring kit make energy tech high tech pneumatic, coil 230 v ac for sov, hand operated pnumatics sov wtp high tech engineering, proxy type pnp supply 10-30 v type ps 2000 d make joy shree pune, pug mill valve sheet ( on/ off) size - 300 mm make aira, syrup seperator valve (on/ off) size 150 mm make - i& s system dehradun, r- valve pnumatic 1/4", boiling house refinery mbf control valve- 3" rubber seat, mbf on/off valve- 4" rubber seat, mbf on/off valve- 6" rubber seat, mbf on/off valve 3" rubber seat, melt concentrator 2" rubber seat hot water valve , 0-150 dgr c rtd pt-100 temp transmitter (tt), refinery ph electrode with transmitter, abb flow meter 3" model no. fep 63 y0a20080 a size 3", melt concentrator control valve 12" rubber seat , melt concentrator control valve 10" rubber seat , level transmitter (lt) make abb range 0-5000 mmwc remote seal type, control valve positioner make rotex model rtx 1000 -r-d-2-r1-2g-4r-nd-c-41 serial no. rtx/22/0873, multimeter make fluke, loop calibrator / milium source make masi bus, boiling house and boiler compressor k smart oil 200 l , oil filter element 150 lpm, air filter element, air oil seprator element kit, gasket , air oil seperator ele

CTN :45511136

02 Jul, 2026 3.60 Crore

Ujjain - Madhya Pradesh

Tender For corrigendum : supply of accessories for cable- (i)piercing connector type-i 16-50, (ii)piercing connector type-ii 16-50, (i)piercing connector type-i for single phase/ three phase (main 70-150 sqmm. tape of 50-95sqmm), (ii)piercing connector type-ii (main 70-150 sqmm tape-of 50-95 sqmm), suspension clamp with attachment, tension clamp with attachment, cable straight-through joint kit suitable for 70 sqmm, cable end termination kit suitable for 70 sqmm, i)t clamp for bus bar for dog to dog conductor, ii)terminal clamp for busbar for panther conductor, bi-metallic clamps for vcb, bi-metallic clamps for transformer, 30v 100ah lead acid battery, battery charger suitable for 30 v 100ah battery, 30v dc lithium-ion battery set, lt robust fuse unit/switch fuse unit, gi pipe 150mm b grade, gi pipe 150mm a grade, heat shrinkable cable jointing kit with lugs for 33/11 kv 3 core (33/11kv, 3*300 sqmm), (i)ht bi-metallic clamps for dtr, (ii)lt bi-metallic clamps for dtr, (i) dc distribution board with mcb, (ii)ac distribution board with mcb, led lamp complete fitting, (i) aluminium lugs 70 sqmm, (ii) aluminium lugs 150 sqmm, (iii) aluminium lugs 300 sqmm, pf unit (kitkat) 200 amp., pf unit (kitkat) 300 amp., hrc fuse base 200/250 amp., hrc fuse base 300 amp., hrc fuse base 400 amp., hrc fuse link 200/250 amp., hrc fuse link 300 amp., hrc fuse link 400 amp, hand operated chain pulley block 3 ton, silica gel breather 500 gm., (i) bi-metallic clamp suitable for 12mm dia lt stud, (ii) bi-metallic clamp suitable for 20mm dia lt stud, (iii) bi-metallic clamp suitable for ht stud, i) i-bolt 20 mm., ii) i-bolt 16 mm., t.c. fuse wire 14,16,18 & 20 swg, ethical & generic medicines and surgical items for dispensary mppkvvcl, ujjain

Aluminium Busbar Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government And Public Sector

Central Government/Public Sector

Central Government/Public Sector

Corporations And Associations And Others