Latest aluminium chequered plate Tenders | Government aluminium chequered plate Tenders

State Government

CTN :40906377

09 Jul, 2025 1.98 Lacs

Kullu - Himachal Pradesh

Tender For repair of damaged steel foothpath at bhutti chowk dhalpur kullu sh providing and fixing chequered plate and runner

corporations/Associations/Others

CTN :40649907

02 Jul, 2025 NA

Pune - Maharashtra

Tender For supply of suspension parts - supply of suspension parts, spherlastics bush tvs / wheels india make-meriter620000000063, boltm20x2.5x130, radius rod axle bracket tvs / wheels india make620000001013 / 620/1013 / 620000002198, spherlasticbushtvs / wheels india make-meriter 620000000790s / 620000000790, rubber bellow big tvs make/ wheels india 1r1k-420-300 / w010950m545 / fgw010950m545 / 62000001387, boltm16x2x100 / 625000020069, levelling valve major assy lh277632400129, spherlastic bush tvs / wheels india make-meriter620000000539, anti roll bar assy620000100338 / 620/338, 12" steel clamp pl620000000449, radius rod tvs / wheels india make 620000000982, spring hanger bracket front550732103706, hex nut1 ( m10x1 )12052399015 / m10x1, mr split bush assytvs / wheels india make-meriter620000000704, hanger link assy tvs / wheels india make 620000100337 / 620/100337, screw (m12x1.75x25) 278618999917 / 3901249 / 625000020149, wheel nut m22x2.5257540100110 / 263140100107, camshaft lh288042107901, set screw coller (third arm bolt) 257342106719 / m12800-0200257342108001 / m16x1.5x139 /, u clamp550732504220, compoand link bracket tvs / wheels india make lh 620000000929, steel clamp plate tvs / wheels india make620000000450, ful crum pin288042106701, axle bolt581735608001, u bolt tvs / wheels india make 278032404201 / m24x1.5x378 / 620000001009, ny lock nut for axle stud m12x1.5din934.5 / 12140701201 / 918123110 / l3621218, spacer tube266835608603, parller link support bkt tvs / wheels india make620000061371, parller link bkt lh tvs / wheels india make620000061370, parller link support bkt rh tvs / wheels india make620000061380, bolt m14x1.5x50625000020049, circlip257342104303, rear levevingbkt tvs / wheels india make620000061494, threaded ring266835306501, axle nut12056699023 / m12x1.5din 934.5 / l3021218 / 911123210, coller bolt m16x1.5x182, housing plate (balancing plate)n.p.n, spring hanger bracket550732403710, hex nutm16x1.5 12052396067, 6mm nylone pipe 1mtr tvs / wheels india make620000000286, rubber bush550732807504, male conector tvs / wheels india makem12x1.5 620000001140, circlip cam end288042104302, hard washer tvs / wheels india make625000230029, castle nut m24x1.05din957, coller boltm16x1.5x143 / a01956020-0200, sleeve derlin264142108602, castle nut m12x1.5 / 12102096027, male elbow tvs / wheels india make620000001144, hex nut with collerm16x1.5 550532506501, rubber pad257341307501, rubber connector tvs / wheels india make 620000000287 / 620000000280, screw tvs / wheels india make620000001447, hex screw tvs / wheels india make 625000020179 / m20x2.5x55, rubber bush550732807501, wheel ball w/n w424020071, lock washerc20din7436, spacer ring3223530352, nylock nut (938)m12x1.75, castle nut m18x1.5din937.5 / 257446006502 / 12102801080, rubber cen.bre.honey comb257341307505, castle nut (fr hub check nut) m32x1.05din937.5 / 12102299068 / m32x1.05x941, hex bolt m14x1.5x7011064114621 / m14x1.5x70, castle nutm14x1.5din935 / 12102001409, repair kit for leveling valvetvs / wheels india make620000100205, leveling valvetvs / wheels india make620000100413, hex bolt tvs / wheels india makem16 x 2 x 130mm 625000020078 / 625000020070, hex nylock nut625000140017 / m24x1.5, bump stoptvs / wheels india make620000000639, hanger linktvs / wheels india make620000001474, rubber connectertvs / wheels india make620000100207, nut tvs / wheels india make m16x1.5 625000140040, stud tvs / wheels india make620000000199, bolt hex tvs / wheels india make 625000020119 / m20x2.5x100, parller link lh tvs / wheels india make 620000100029, parller rod assy tvs / wheels india make620000100159, cow horn major assy lh tvs / wheels india make277832400152, cow horn doweltvs / wheels india make 620000000928, shock absorber tvs / wheels india make gabrial/ motherson620000000560, gasket carrier taper pivot w/o spigot tvs / wheels india make257635115302, taper pivot w/o spigot tvs / wheels india make620000000690, m16 spring washer tvs / wheels india make625000230006, boltm10x1.

CTN :40870616

18 Jul, 2025 NA

Kamrup - Assam

Tender For supply of encoer ortho glove size 7 , encoer ortho glove size 7 1 slash 2 , silicon in minus soles xl , silicon in soles l , orthopedic heating belt slash pad m , orthopedic heating belt slash pad l , 3 dot 5mm anterolateral distal tibial locking plates with 7 x 3 dot 5mm locking and cortical screws complete construct dot titanium , saw blades for conmed saw system , synthetic bone graft cubes minus sterile packed dot , synthetic bone graft wedges minus sterile packed dot , preminus sterile hydrofiber skin friendly flexible waterproof dressing size 9x15 cm , preminus sterile hydrofiber skin friendly flexible waterproof dressing size 9x30 cm , neoprene ankle brace large size , mosaic plasty osteochondral autograft transfer system 8 mm dot full quality assurance pre minus sterilised , calibrated cannulated 4 fluted drill bits h dot s dot s dot 175 minus 200mm length 2 dot 5 mm comma 3 or 4 faced chuck end dot 316lvm stainless steel dot , calibrated cannulated 4 fluted drill bits h dot s dot s dot 175 minus 200mm length 4 dot 5 mm comma 3 or 4 faced chuck end dot 316lvm stainless steel dot , ao pattern locking head screws 3 dot 5mm dia comma self tapping comma lengths 10 to 90 mm titanium comma should be mri safe dot , ao pattern 4 dot 0 mm partially threaded cannulated cancellous screws 20 to 80 mm length with washer dot materialminus 316lvm stainless steel comma should be mri safe dot , ao pattern 6 dot 5mm cannulated cancellous screw comma 16 mm partially threaded comma self minus tapping comma length 35mm to 100mm with washer titanium should mri safe , ao pattern 6 dot 5mm cannulated cancellous screw 32 mm partially threaded self minus tapping length 35mm to 105mm with washer material 316lvm stainless steel should be mri safe , radial head prosthesis comma uncemented with grit blasted slash porous coated stem surface comma multiple head diameter and stem length options required , ao pattern washer for 6 dot 5mm cancellous screw titanium comma should be mri safe dot , shaver blade size 3 dot 5 slash 4 dot 5 slash 5 dot 5 slash 2 dot 7 dot full quality assurance , cement restrictor plug , saw blades 1 dot 27mm for bpl2 stryker power system small slash medium slash broad , saw blades 1 dot 27mm for bpl2 synthes power system small slash medium slash broad , normal saline irrigation fluid for arthroscopy 3 ltr , tibial post fixation screws for acl reconstruction dia 6 dot 5mm length 30 mm , surgeon comma s gown wrap around large size comma water repellent with gsm 65 minus 77 with knitted cuff , arthroscopic pump tubing set with two puncture needles , 6 dot 5 ccs guide wire 1 dot 8 mm , smooth guide wire for femoral nailing long length , cannulated cancellous screw titanium 6 dot 5 mm with thread size 80 comma 85 comma 90 comma 95 comma 100 , 6 minus 12 holes 3 dot 5 mm titanium dcp plate with cortical and locking screws complete construct dot , disposable o minus drape , ethibond suture nominus 5 non absorbable , ethibond suture nominus 2 non absorbable , sterile disposable knee drapes pack pack should have conformable circular fenestration drape of water proof breathable triple layer fabric material dot , knee scorpion suture passer with scorpion needle comma suture tape 0 dot 9 mm , ortho surgical gown sterile comma disposable waterproof wrap around type medium comma large comma extra large dot aami 4 , cannuleted flexible reamer set for im nailing , trauma drape pack lower limb consisting of one impervious u drape one impervious o drape comma 4 x large sheets two cling films and anaesthesia isolation sheet with adhesive strip , disposable cannula 6mm , disposable cannula 8mm , arthroscopic knot cutter , interlocking cannulated anatomical femoral nailstrochantric entry5 minus and 7 degrees proximal offset with 4x 5 slash 4 dot 9 mm locking bolts end cap titanium comnplete construct , fiberstich sterile dispoisable comma all inside meniscalb repair device with 2 all suture suture implants and 2 minus 0 coreless uhmwpe suture , 2

Central Government/Public Sector

CTN :40870455

07 Jul, 2025 NA

Tiruvallur - Tamil Nadu

Tender For supply of rod st.const.-part number-961680308 , pin-part number-451430508 , retaining spring-part number- 433101208 , pressure sensor-part number-10816913 , adapter cable-part number-11000562 , hex screw- part number-11140402 , monitor with keyboards- part number-913285008 superseded by 10885338 , oil drain plug-part number-5004624 superseded by 12695663 , sealing ring-part number-710106508 , sheet-metal screw-part number-408200008 , washer- part number-10875645 , pan-head screw-part number-12216226 , guide pin-part number-10871288 , guide bushing-part number-10871289 , hex nut-part number-10875611 , screw plug-part number- 602425208 , male insert-part number-605609008 , socket shell-part number-605618608 , knotted-link chain-part number-740000808 , cable tie-part number-12104809 , sealant-part number-870002808 , crimping contact-part number-605610208 , fitting- part number-470430708 , fitting-part number- 475436108 , fitting-part number-470011308 , non- return valve-part number-511481508 , hose cpl.- part number-929339308 , hydro cylinder-part number-512389008 , seal kit diesel engine-part number-10115838 , water pump, pre-assembled-part number-10132817 , o-ring-part number-7381779 , o- ring-part number-501244408 , thermostat-part number-7380833 , o-ring-part number-570979708 , repair kit-part number-571582108 , repair kit-part number-571582708 , cable list sa-frame-part number-961857008 , plate-part number-975789508 , plate-part number-971249608 , plate-part number- 975904108 , cover compl.-part number-963544508 , axle holder-part number-997040301 , restrictor valve-part number-511421508 , oil line-part number- 571917108 , rope - 28 mm x 1000 m-part number- 10814602 superseded by 11124204 , pressure gauge- part number-750001808 , pressure gauge-part number-750001408 , hose cpl.-part number-927609808 , hose cpl.-part number-924936408 , hose cpl.-part number-929712108 , hose cpl.-part number-924673108 , hose cpl.-part number-925341208 , hose cpl.-part number-928750508 , hose cpl.-part number-924095608 , hose cpl.-part number-921573608 , hose cpl.-part number-962065408 , hose cpl.-part number-927682808 , hose cpl.-part number-926359608 , hose cpl.-part number-961797008 , hose cpl.-part number-926608308 , hose cpl.-part number-962065508 , hose cpl.-part number-962065608 , hose cpl.-part number-928459308 , hose cpl.-part number-961797508 , hose cpl.-part number-961797608 , hose cpl.-part number-926073808 , hose cpl.-part number-926147708 , hose cpl.-part number-928872308 , hose cpl.-part number-927690408 , hose cpl.-part number-927477308 , hose cpl.-part number-922077508 , hose cpl.-part number-928874108 , hose cpl.-part number-929629708 , hose cpl.-part number-961797708 , hose cpl.-part number-920973508 , hose cpl.-part number-929619008 , hose cpl.-part number-962169508 , hose cpl.-part number-926972508 , hose cpl.-part number-928042908 , hose cpl.-part number-929379908 , hose cpl.-part number-962169608 , hose cpl.-part number-928760508 , hose cpl.-part number-962065808 , holding plate-part number- 972205608 , pin-part number-971619208 , retaining spring-part number-433105008 , handle weld.const.- //bid details 2 / 138 part number-921079508 , pin-part number-972205708 , spring plug-part number-433206408 , floor plate- part number-388291208 , bracket with board-part number-967054708 , bracket with board-part number-967054608 , axle-part number-979282908 , plate-part number-971207108 , plate-part number- 971207208 , hex screw-part number-10487986 , washer-part number-4600146 , hex nut-part number- 10875607 , hex screw-part number-11631742 , round steel-part number-954584908 , rope guard-part number-11481159 , rope pulley cpl.-part number- 926892808 , plate-part number-97006134 , plate-part number-97006135 , electric aircraft protection- part number-963623008 , electric wind warning tele-part number-926803808 superseded by 916488499 , wind velocity transmitter-part number- 691404608 superseded by 11066001 , hydraulic oil- 210 l bar

Central Government/Public Sector

CTN :40855071

10 Jul, 2025 NA

Durg - Chhattisgarh

Tender For providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - manufacturing unit; total ladle lining management including ladle lining, monitoring, maintenance, and top plate fixing, welding, and de-bricking / dismantling of steel ..

CTN :40862067

09 Jul, 2025 NA

Bhind - Madhya Pradesh

Tender For under case number 11/25x3/5, small construction work, maintenance, repair, patchwork and material supply work in ward number 09 under the body area.-, , cement concrete grade m-10 (nominal mix with 40 mm maximum size of stone aggregate-providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level, foundations, footings, bases of columns, etc. for mass concrete centering and shuttering including strutting, propping stretchin g etc. complete for and removal of form work by sheet plate or ply wood shuttering for:, cement concrete grade m-20 (nominal mix) with 20 mm maximum size of stone aggregate-providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level, providing and laying cement concrete grade m-20 (nominal mix 1:1.5:3) with 20 mm graded crushed stone aggregate, mixing shall be in mechanical mixer, laying with paver compacting by use of pin, plate/screed vibrators including form work by strong steel girders fixed by spikes, separation membrane 125 micron thick, i/c cutting of joints @ 4 to 5 m interval & filling it with hot applied bitum inous sealant (without dowel bars). (max. thickness 20cm)", , thermo-mechanically treated bars. (fe 500 d or more)-"reinforcement for r.c.c. work including straightening, cutting, bending, placi ng in position and binding upto floor level including cost of binding wire, wastage and over laps upto 12mm horizontal/inclined pos ition of reinforcement bars in slab and beams, plinth, chajjas, lintels, upto 4.5m vertical length of reinforcement in wall columns (over laps shall be provided as per requirement of is: 13920; is 456 & sp: 34) etc. complete.", construction of granular sub-base by providing coarse graded material (cbr>30), spreading in uniform layers with motor grader on pr epared surface, mixing by mix in place method at omc and compacting with vibratory roller of 80-100 kn static weight to achieve the desired density, complete in all respect as per relevant clauses of section-400.", structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete, , two or more coats on new work.-"distempering with 1st quality acrylic distemper (ready mixed) of approved manufacturer, of required shade and colour complete, as per manufacturer's specification.", 300 mm dia-"providing, laying and jointing non-pressure (np4) rcc socket & spigot pipes with rubber gasket joint including testing of joints., 450 mm dia-"providing, laying and jointing non-pressure (np4) rcc socket & spigot pipes with rubber gasket joint including testing of joints, 600 mm dia-"providing, laying and jointing non-pressure (np4) rcc socket & spigot pipes with rubber gasket joint including testing of joints., ,

CTN :40862068

09 Jul, 2025 NA

Bhind - Madhya Pradesh

Tender For under case number 04/25x3/5, small construction work, maintenance, repair, patchwork and material supply work in ward number 02 within the body area.-, , cement concrete grade m-10 (nominal mix with 40 mm maximum siz of stone aggregate-providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work u to plinth level., , foundations, footings, bases of columns, etc. for mass concrete."-"centering and shuttering including strutting, propping stretchin g etc. complete for and removal of form work by sheet plate or ply wood shuttering for:", , cement concrete grade m-20 (nominal mix with 20 mm maximum size of stone aggregate-providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level., , providing and laying cement concrete grade m-20 (nominal mix 1:1.5:3) with 20 mm graded crushed stone aggregate, mixing shall be in mechanical mixer, laying with paver compacting by use of pin, plate/screed vibrators including form work by strong steel girders fixed by spikes, separation membrane 125 micron thick, i/c cutting of joints @ 4 to 5 m interval & filling it with hot applied bitum inous sealant (without dowel bars). (max. thickness 20cm)", , thermo-mechanically treated bars. (fe 500 d or more)-"reinforcement for r.c.c. work including straightening, cutting, bending, placi ng in position and binding upto floor level including cost of binding wire, wastage and over laps upto 12mm horizontal/inclined position of reinforcement bars in slab and beams, plinth, chajjas, lintels, upto 4.5m vertical length of reinforcement in wall columns (over laps shall be provided as per requirement of is: 13920; is 456 & sp: 34) etc. complete.", , construction of granular sub-base by providing coarse graded material (cbr>30), spreading in uniform layers with motor grader on pr epared surface, mixing by mix in place method at omc and compacting with vibratory roller of 80-100 kn static weight to achieve the desired density, complete in all respect as per relevant clauses of section-400.", , structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete", , two or new work.-"distempering with 1st quality acrylic distemper (ready mixed) of approved manufacturer, of required shade and colour complete, as per manufacturer's specification.", , 300 mm dia-"providing, laying and jointing non-pressure (np4) rcc socket & spigot pipes with rubber gasket joint including testing o f joints.", , 450 mm dia-"providing, laying and jointing non-pressure (np4) rcc socket & spigot pipes with rubber gasket joint including testing o f joints.", , 600 mm dia-"providing. laying and jointing non-pressure (np4) rcc socket & spigot pipes with rubber gasket joint including testing o f joints.",

CTN :40862072

09 Jul, 2025 NA

Bhind - Madhya Pradesh

Tender For under case number 11/25x3/5, small construction work, maintenance, repair, patchwork and material supply work in ward number 09 under the body area.-, , cement concrete grade m-10 (nominal mix with 40 mm maximum size of stone aggregate-providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level, foundations, footings, bases of columns, etc. for mass concrete centering and shuttering including strutting, propping stretchin g etc. complete for and removal of form work by sheet plate or ply wood shuttering for:, cement concrete grade m-20 (nominal mix) with 20 mm maximum size of stone aggregate-providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level, providing and laying cement concrete grade m-20 (nominal mix 1:1.5:3) with 20 mm graded crushed stone aggregate, mixing shall be in mechanical mixer, laying with paver compacting by use of pin, plate/screed vibrators including form work by strong steel girders fixed by spikes, separation membrane 125 micron thick, i/c cutting of joints @ 4 to 5 m interval & filling it with hot applied bitum inous sealant (without dowel bars). (max. thickness 20cm)", , thermo-mechanically treated bars. (fe 500 d or more)-"reinforcement for r.c.c. work including straightening, cutting, bending, placi ng in position and binding upto floor level including cost of binding wire, wastage and over laps upto 12mm horizontal/inclined pos ition of reinforcement bars in slab and beams, plinth, chajjas, lintels, upto 4.5m vertical length of reinforcement in wall columns (over laps shall be provided as per requirement of is: 13920; is 456 & sp: 34) etc. complete.", construction of granular sub-base by providing coarse graded material (cbr>30), spreading in uniform layers with motor grader on pr epared surface, mixing by mix in place method at omc and compacting with vibratory roller of 80-100 kn static weight to achieve the desired density, complete in all respect as per relevant clauses of section-400.", structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete, , two or more coats on new work.-"distempering with 1st quality acrylic distemper (ready mixed) of approved manufacturer, of required shade and colour complete, as per manufacturer's specification.", 300 mm dia-"providing, laying and jointing non-pressure (np4) rcc socket & spigot pipes with rubber gasket joint including testing of joints., 450 mm dia-"providing, laying and jointing non-pressure (np4) rcc socket & spigot pipes with rubber gasket joint including testing of joints, 600 mm dia-"providing, laying and jointing non-pressure (np4) rcc socket & spigot pipes with rubber gasket joint including testing of joints., ,

CTN :40862073

09 Jul, 2025 NA

Bhind - Madhya Pradesh

Tender For under case number 08/25x3/5, small construction work, maintenance, repair, patchwork and material supply work in ward number 06 within the body area.-, , cement concrete grade m-10 (nominal mix with 40 mm maximum siz of stone aggregate-providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work u to plinth level., , foundations, footings, bases of columns, etc. for mass concrete."-"centering and shuttering including strutting, propping stretchin g etc. complete for and removal of form work by sheet plate or ply wood shuttering for:", , cement concrete grade m-20 (nominal mix with 20 mm maximum size of stone aggregate-providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level., , providing and laying cement concrete grade m-20 (nominal mix 1:1.5:3) with 20 mm graded crushed stone aggregate, mixing shall be in mechanical mixer, laying with paver compacting by use of pin, plate/screed vibrators including form work by strong steel girders fixed by spikes, separation membrane 125 micron thick, i/c cutting of joints @ 4 to 5 m interval & filling it with hot applied bitum inous sealant (without dowel bars). (max. thickness 20cm)", , thermo-mechanically treated bars. (fe 500 d or more)-"reinforcement for r.c.c. work including straightening, cutting, bending, placi ng in position and binding upto floor level including cost of binding wire, wastage and over laps upto 12mm horizontal/inclined position of reinforcement bars in slab and beams, plinth, chajjas, lintels, upto 4.5m vertical length of reinforcement in wall columns (over laps shall be provided as per requirement of is: 13920; is 456 & sp: 34) etc. complete.", , construction of granular sub-base by providing coarse graded material (cbr>30), spreading in uniform layers with motor grader on pr epared surface, mixing by mix in place method at omc and compacting with vibratory roller of 80-100 kn static weight to achieve the desired density, complete in all respect as per relevant clauses of section-400.", , structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete", , two or new work.-"distempering with 1st quality acrylic distemper (ready mixed) of approved manufacturer, of required shade and colour complete, as per manufacturer's specification.", , 300 mm dia-"providing, laying and jointing non-pressure (np4) rcc socket & spigot pipes with rubber gasket joint including testing o f joints.", , 450 mm dia-"providing, laying and jointing non-pressure (np4) rcc socket & spigot pipes with rubber gasket joint including testing o f joints.", , 600 mm dia-"providing. laying and jointing non-pressure (np4) rcc socket & spigot pipes with rubber gasket joint including testing o f joints.",

CTN :40862074

09 Jul, 2025 NA

Bhind - Madhya Pradesh

Tender For under case number 11/25x3/5, small construction work, maintenance, repair, patchwork and material supply work in ward number 09 under the body area.-, , cement concrete grade m-10 (nominal mix with 40 mm maximum size of stone aggregate-providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level, foundations, footings, bases of columns, etc. for mass concrete centering and shuttering including strutting, propping stretchin g etc. complete for and removal of form work by sheet plate or ply wood shuttering for:, cement concrete grade m-20 (nominal mix) with 20 mm maximum size of stone aggregate-providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level, providing and laying cement concrete grade m-20 (nominal mix 1:1.5:3) with 20 mm graded crushed stone aggregate, mixing shall be in mechanical mixer, laying with paver compacting by use of pin, plate/screed vibrators including form work by strong steel girders fixed by spikes, separation membrane 125 micron thick, i/c cutting of joints @ 4 to 5 m interval & filling it with hot applied bitum inous sealant (without dowel bars). (max. thickness 20cm)", , thermo-mechanically treated bars. (fe 500 d or more)-"reinforcement for r.c.c. work including straightening, cutting, bending, placi ng in position and binding upto floor level including cost of binding wire, wastage and over laps upto 12mm horizontal/inclined pos ition of reinforcement bars in slab and beams, plinth, chajjas, lintels, upto 4.5m vertical length of reinforcement in wall columns (over laps shall be provided as per requirement of is: 13920; is 456 & sp: 34) etc. complete.", construction of granular sub-base by providing coarse graded material (cbr>30), spreading in uniform layers with motor grader on pr epared surface, mixing by mix in place method at omc and compacting with vibratory roller of 80-100 kn static weight to achieve the desired density, complete in all respect as per relevant clauses of section-400.", structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete, , two or more coats on new work.-"distempering with 1st quality acrylic distemper (ready mixed) of approved manufacturer, of required shade and colour complete, as per manufacturer's specification.", 300 mm dia-"providing, laying and jointing non-pressure (np4) rcc socket & spigot pipes with rubber gasket joint including testing of joints., 450 mm dia-"providing, laying and jointing non-pressure (np4) rcc socket & spigot pipes with rubber gasket joint including testing of joints, 600 mm dia-"providing, laying and jointing non-pressure (np4) rcc socket & spigot pipes with rubber gasket joint including testing of joints., ,

Aluminium Chequered Plate Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector