Latest aluminium bar Tenders | Government aluminium bar Tenders

Central Government/Public Sector

CTN :45732202

04 Jul, 2026 NA

Mumbai - Maharashtra

Tender For supply, termination installation, testing and commissioning of ventilation system in paint shop of lower parel workshop along with complete installation of industrial air blower with movable trolley, operating voltage 190v ac to 380 v ac, 50 hz, single/three phase supply, maximum power consumption shall be less than 600 watt, maximum speed of 400 rpm, air flow of 700 meter cube per minute, weight shallbe less than 60 kg and noise shall be less than 50db. size of blower shall not be more than 1500 mm diameter confirming to is 6272-1987 or latest all electrical works shall be carried out in accordance with the provision of indian electricity act 2003 and indian electricity rules 1956 amended to date and all the safety codes and procedures outlined in the safety codes shall be complied with general and safety requirement shall be governed by is 13947 (pt 1) 1993 and is:8623/1993, amended to date. termination of all cables shall be done with bimetallic terminal connector suitable for 2.5 dia aluminium tubular busbar for 20a copper palm copper cu etp cw 0041a and aluminium barrel aluminium al 99.5 cable connector temperature resilience, corrosion resistance size: 2.5 sqmm confirming to is: 5561-1970 with maximum temperature rise of 90 degree celsius. materiat shall be confirmed to designation a6 of is: 617-1959. breaking resistance for barrel 85 n/m sq m and for palm 225 n/m sq m with stretching a5% for barrel must be for palm 2.5. type test certificate from nabl or any other govt. agency lab report shall be attached along with the offer without which offer will be rejected. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45737409

08 Jul, 2026 NA

Mumbai - Maharashtra

Tender For supply of bimetallic terminal connector suitable for 25 mm dia, aluminium tubular bus bar to terminal pad of 3.3 kv isolator/ct with copper palm copper cu etp cw004l and aluminium barrel aluminium al 99.5cable connector temperature resilience, corrosion resistance confirming to is: 5561-1970 with maximum temperature rise of 90 degree elsius. material shall be confirmed to designation a6 of is: 61 7-1959. breakingresistance for barrel 85 n/m sq m and for palm 225 n/m sq m with stretching a5% for barrel must be for palm 35. (nabl certificate shall be submitted along with the offer) [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45743942

07 Jul, 2026 NA

Mumbai - Maharashtra

Tender For supply and end termination of over load current protection system along with full end termination suitable for overload and short circuit protection along with miniature circuit breaker distribution board with eight way mcb capacity 415 with busbar rating 200a v, c type rated sc capacity 10ka confirming tois: 13032:1991 latest with housing powder coating siemens grey-7035 with bimetallic terminal connector suitable for 16 dia aluminium tubular busbar for 32a copper palm copper cu etp cw 0041a and aluminium barrel aluminium al 99.5 cable connector temperature resilience, corrosion resistance size: 16 sqmm confirming to is: 5561-1970 with maximum temperature rise of 90 degree celsius. material shall be confirmed todesignation a6 of is: 617-1959. breaking resistance for barrel 85 n/m sq m and for palm 225 n/m sq m with stretching a5% for barrel must be for palm 16. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45604809

07 Jul, 2026 NA

Mumbai - Maharashtra

Tender For corrigendum : supply and end termination of over load current protection system along with full end termination suitable for overload and short circuit protection along with miniature circuit breaker distribution board with eight way mcb capacity 415 with busbar rating 200a v, c type rated sc capacity 10ka confirming tois: 13032:1991 latest with housing powder coating siemens grey-7035 with bimetallic terminal connector suitable for 16 dia aluminium tubular busbar for 32a copper palm copper cu etp cw 0041a and aluminium barrel aluminium al 99.5 cable connector temperature resilience, corrosion resistance size: 16 sqmm confirming to is: 5561-1970 with maximum temperature rise of 90 degree celsius. material shall be confirmed todesignation a6 of is: 617-1959. breaking resistance for barrel 85 n/m sq m and for palm 225 n/m sq m with stretching a5% for barrel must be for palm 16. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45709820

20 Jul, 2026 NA

Veraval - Gujarat

Tender For supply of aluminium barrel tower bolt of dia d=10mm, size 150mm, confirming to is:204 (part 2)-1992 (5th revision) with amendment-3 of jan.-2008,type-4. [ warranty period: 30 months after the date of delivery ] ]

State Government

CTN :45684603

06 Jul, 2026 NA

Haringhata - West Bengal

Tender For rate quoted for mgnrega work various material under haringhata block - rate quoted for mgnrega work various material under haringhata block, 1 st picked class brick, 1 st class brick, 1st class brick bats ( size as direction of eic)., silver sand, fine sand, medium sand, course sand, portland cement, brick aggregrates (single size) 40 mm normal size., stone aggregrates (single size) 40 mm normal size. (without carriage), stone aggregrates (single size) 20 mm normal size.(without carriage), stone aggregrates (single size) 10 mm normal size.(without carriage), stone aggregrates (single size) 5.6 mm normal size.(without carriage), stone aggregrates 13.2 mm nominal size. (without carriage), stone aggregrates 11.2 mm nominal size. (without carriage), 22.4 mm machine made chips (without carriage)., jhama metal kiln burnt. ( size as direction of eic)., thermocol 12.5 mm thick., polythene sheet (150 gm per sqm), hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, hire charge of shuttering plank(without prop )(25mm-30 mm), hire charge of shuttering plank(with prop )(25mm-30 mm), hire charge of shuttering plank( with prop (30mm 37 mm ), vibrator (needle type 40 mm), steel material- tor steel rods/hysd bars/tmt bars(sail/tata/rinl) (fe415/fe500/fe500d,conforms to is 1786), steel material- tor steel rods/hysd bars/tmt bars(jsw/jspl/shyam/srmb/ssl/bmasl/electro steel)(fe415/fe500/fe500d,conforms to is 1786), ms ornamental grill (above 10 kg/sq.m up to 16 kg/sq.m, nail, 1220. wire mesh (rabbit), glue, 3050. galvanised steel corrugated sheets, 1023. galvanised steel j or l hooks 8 mm dia, galvanised steel bolt & nuts 6 mm dia and 25 mm long round head with slots, g.i lime washere, bitumen washer, stainless steel bolts/ square bar and plates, unslaked lime, supply of first aid box including medicines (specified by pia) at site., display board(ibs), display board(ibs), g.i. wire, coconut rope, sal ballah (10 cm ), sal ballah ( 125 mm ), sal ballah (15 cm ), cement primer(interior), cement primer(exterior), primer( for wood), cement based dust putty, black japan paint, enamel paint for steel grill, synthetic enemel paint in black or chocolate shade., woodwork for door and window frame malayashia sal, panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position butexcluding the cost of hinge and other fittings.(ii) 40mm thick shutters with 19mm thick panel of size 30 to 45 cm.(b) sishu, gamar, champ,badam,bhola, mogra, hallak., supplying, fitting & fixing factory made p.v.c. door frame of size 50 mmx47 mm with a wall thickness of 5 mm, made out of extruded 5 mm, pvc sheet miter, coloured orissa pattern w.c. pan 580x440 mm, vitreous china pedestal for wash basin, vitreous china foot rests 250x125x25 mm, ptmt - liquid soap container of 400 ml capacity, ptmt - towel rail (600 mm), ptmt - soap dish/holder 138x102x75 mm, fan hook, r.c.c. ventilator, vitrified floor tile 60x60 cm, turpentine oil, vitreous china flat back wash basin 450x300 mm, r.c.c. pipes np2 class 450 mm dia, r.c.c. pipes np2 class 300 mm dia, supplying, fitting & fixing 30 mm thick both side prelaminated factory made solid panel pvc door shutter consisting of outer frame made out of m.s. tubes of 19 gauge thickness and size 19 mmx19 mm for styles, top and bottom rails, m.s. frame shall have cost of steel primers of approved make, supplying, fitting and fixing m.s. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (cost of concrete will be paid separately) (a) 40mm x 6mm, 250mm length, anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to i.s. specification (i.s. 205/66) and fitted and fixed with cadmium plated screws: (vii) 100 x 75 x 4.0mm, anodised aluminium barrel / tower / socket

Central Government/Public Sector

CTN :45702701

01 Jul, 2026 NA

Chennai - Tamil Nadu

Tender For auction sale of rolling stock - condemned and unserviceable bg demu coach no. special repair dpc 008073 with available items [refer enclosure for the material composition]. location: coach care centre tpj/diesel loco shed goc. custodian: sse/demu/diesel shed/goc. re-claimable items - [1] wheel sets with bull gear-04 sets [2] 8v 450ah lead acid battery-03 nos [3] 6v batteries-18 nos [4] truck assembly-02 sets [5] axle box with bearings-08 nos [6] buffer complete-02 nos [7] schaku coupler assembly[draw bar with hook, draft gear assembly]-01 set [8] brake cylinders-04 nos [9] wear pieces(brass)-04 nos [10] dpc main doors-02 nos. advice note no.073817-25-08698, dt: 11.12.25. note-[1] delivery to be made on as is where is and lot basis.[2]the location indicated is only tentative. railway reserves the right to change the location of sold coach, based on the availability of track, cutting and loading space and other administrative reason, as deemed fit by the auction conducting officer.[3]gas/chisel cutting is permitted only to sizes that are loadable with a crane, only after ensuring sufficient safety measures against fire hazards etc. to avoid any mishap to any person, railway material etc. and the same should be ensured by the witnessing officials.[4]in case purchasers require usage of any railway assets/materials such as electricity/forklift truck etc. during the process of delivery, they are required to pay the prescribed amount to railways, as directed by the respective custodian of the lot. special condition- [1] reclaimable item as said above in description of the lot, should be returned to the custodian before commencing delivery. [2] in order to make the assessment, the purchaser may visit the coach offered for condemnation and the site conditions before quoting the offer.[3] the purchaser has to make his own arrangements such as tools, lifting tackles, lifting equipment, gas cutting equipment. [4] the weight and quantities were taken into consideration as advised by the custodian [5] the purchaser may note that reclaimable items of coach are to be stripped instead of gas cutting to avoid damage to rc items and the purchaser should make such arrangements, especially traction motors should be removed by using proper tools and equipments without causing damage to truck assembly [6] the purchaser is strictly instructed to transport/stack all the reclaimable items at one location well away from the cut off parts of the coach as directed by the custodian. [7] the purchaser will be held responsible for any damage/fire accident caused to the railway property. [8] railway is not responsible for any shortage.[9] after completion of delivery, purchaser has to keep the cutting and loading spot neat and clean, free of any left over coach scrap. [10] railways does not guarantee for quality, quantity description etc.[11] delivery should commence immediately after cutting without any delay. [12] the courts in chennai alone shall have exclusive jurisdiction in the matters/disputes arising out of the contract/arbitration/conciliation proceedings and the place of arbitration/conciliation, if any, shall be in chennai only. [13] bsv partly paid along with emd will be forfeited, if full payment is not received in stipulated time, with interest if any applicable. [14] part delivery is not permitted against part payment. [15] if any hsd oil/lube oil available in fuel tank/oil sump of the said coach, the same may be returned to the custodian.(location: coach care centre tpj / diesel loco shed goc)

Central Government/Public Sector

CTN :45467327

04 Jul, 2026 NA

Bangalore - Karnataka

Tender For corrigendum : supply of aluminium bar-ams 4132 dia150+ /-4mm , aluminium bar-au2gn dia 200+ /- 6 mm

Central Government/Public Sector

CTN :45702761

03 Jul, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - cond.& u/s diesel/emu/c&w/lhb, equilising beam, buffer, ac loco components such as tooth gears, crank shaft, brake disc, pinion, injector, gear wheel, cylinder liners, grease cup, alternator fan cover filter assembly, cattle guard, sab air brake components,air brake cylinder components, shock absorber, cattle guard, linear,traction motor spare parts, dust collector,tapperbearing with polimer cage,doubelcupcollar,shockabsorber,hp cylinder rail guard, outer/inner sleeves of bearing bolts& nuts, air filter, damper, lube oil filter, tiny springs,rotor, anchor link scrap, sab components, cutoff angle cock, control arm upper, ca lower, traction rod, anti roll bar assembly, axle box components, gears, brake disk, leaf spring, carrier assembly, bearing bolt, centering device, fork eye, coupler sleeve, air pipe assembly, break shoe bolster link, hoop coupler, parking break assembly,primary and secondary springs,footsteps,bolster hanger, dust guard, wearing plate, compensating ring, impeller, inner hanger,iron bracket above transformer, brake gear components, spring plate, coupler sleeve, brake hanger, yoke lead, coupler bearing, coupler rear plate, coupler clearance plates, wearing plate, brake beam, dust covers, collar, dashpot top, protective tube, gear case vocer, side bearer cover, pins for hanger, machinery items cut pieces, shock absorber, nipplers, cutout cocks, etc., tm pinion, tm parts as holder plate and end shield, axle box parts as axle box cover,boldter,oilcup,angles,equilising stay,pipes,nosepad,lsbeam,cibrakeblock , automobile parts,silentblock,impeller housing,cowl, axle guide and racer, traction link, the bar, traction housing,brake hangar, pull rod, slack adjuster, knuckle, clevis, screw coupling, cbc coupler and parts, fuffer, cattle guard, labyrinth, bearing for axle box, traction motor and aux motors, damper, sand box, sand ejector, sand pipe, foot step, sand ejector., angle cock and ferrous couplings, lathe machine head, junction box, cutting ferrous, angles, rod, ferrous heater coils, ferrous lamp pipe, transformet brackets, oil lubricator for suspension bearing, lid for gear case, linear, push rod &gudgeon pin, compressor, hood with impeller,ocb ducts, labyrinth, end frame tamper, hanger link, cylinder linear, oil dispersive, axle box cover, servo motor, striker casting with grease adherings(diesel),castiron components, impeller, guard, compartment sliding doors, compensating ring, end sheild, cartridge with nu bearing,pipe, drum,hoist, gear, impeller, eot crane wheels, eot crane gears , side rod, pull rod, pinion wheel, pull lift chain, door closer, emu coupler,inter cooler, engine head, covers, dooms, pipes, tank, front cover, rear cover, hand rail, after cooler, cylinder body, spring piston, holder plate,sand box, labyrinth, lhb bearings, outer bearing covers, end shield, piston trunk, adjusting rod, palm pull rod, control arm, dbr rf boxes,hoods, brake hanger, brake hanger with head, brake head & semi permanent coupler and parts, bmbc components, bend cover, inspection cover, centrifugal dust collector, cut off angle cock, safety rod, racker arm, valve plate, cylinder bore, bearing cover, emu sliding door, silencer, racer, raiser, bellow plate, door operating cylinder scrap, msu components scrap, labyrinth &pinion shaft(diesel), compensation ring, buff gear, hood with impeller, ront fork complete housing, lb spring set scrap, stator w/o coil, contering dis, anger link with or w/o silent block, oil cup and all other scraps released from diesel / ac loco/emu/c&w/lhb components and all other ms/ci with/without minor non ferrous attachments in as is where is condition. pl no. 98050126. custodian: cdms-rsf-gsd-per. note: 1) cutting permitted to loadable sizes only. 2) during delivery if any major non-ferrous items found the same should be handed over to custodian. 3) loading by crane / jcb is also permitted. location: bin n

CTN :45674269

04 Jul, 2026 NA

Tawang - Arunachal Pradesh

Tender For supply of health faucet (q3) , copper alloy taps/stop valves (v2) conforming to is 8931 (q3) , plastic bib taps, pillar taps, angle valves & stop valves for hot & cold water services conforming to is 9763 (q3) , towel rail (q3) , plastic seats and covers for water - closets as per is 2548 (q3) , pvc three layer water storage tank 500 ltrs , wall mixer cp 3 way 15 mm , pvc three layer water storage tank 1000 ltrs , kitchen sink with out drain board , centre hole basin mixture cp 15 mm , pvc low level flushing cistern 10 ltr , western toilet european pattern , kitchen rack stainless steel 36 inch by 24 inch , sink mixture cp 15 mm , pvc pipe 110 mm bore , wc orissa pattern viterous china 450 by 350 mm , bib cock brass 15 mm , glass shelf 6 mm thick with cp railing , ppr pipe 25 mm , hand wash basin viterous china glazed , ppr pipe 20 mm outer diameter , 15mm brass fancy tap cp bib tap 15mm , looking mirror cabinet type 450 by 300 mm , ppr gate valve 20 mm , hydraulic door closer , angle valve , powder coating bib tap , toilet paper holder cp , pvc waste pipe flexible type 32 mm and 600 mm long , urinal pot viterous flat back , pvc bend 110 mm bore , pvc connection pipe 15 by 600 mm , basin mixtuer assembly cp , ppr union 15mm , ppr gate valve 15mm , 15mm brass fancy tap angle valve , ppr union 20 mm , ppr elbow 20 mm , door wall hook rail set peg set 3 pin , plywood bwr 8 ft by 4 ft by 8 mm , stainless steel curtain rails 4mtr each , plywood bwr 8 ft by 4 ft by 4 mm , pvc three layer water storage tank 300 ltrs , lever type flushing cisten single flush system 10 ltr , ppr gate valve 25 mm , elbow gi 15 mm , door stopper aluminium , ppr 25mm tank socket , cp waste coupling 32 mm , tee equal gi 15 mm , helical door spring , pvc shelf 450 by 200 mm , ppr socket 15mm , ppr elbow 15 mm , nipple gi 15 by 100 mm , 2 way bib cock cp , aluminium sliding bolt 250 mm long , socket gi 15 mm , gi bend 15 mm , stop cock cp brass 15 mm , towel ring cp , ppr tank socket 20 mm , plywood bwr 8 ft by 4 ft by 6 mm , union gi 20 mm , pvc connector 110 mm bore , ppr socket 25 mm , bib cock aassembly cp , ms butt hinges 100 mm , door wall hook rail set , ppr socket 20 mm , pvc towel rail 600 mm , looking mirror 5 mm , ppr tank socket 15mm , shower cp 100 mm with rod , pvc soap dish , white cement , flushing handle suitable for 10 ltrs cistern , pvc over head shower with arm , jet spray cp 15 mm , tee gi 15mm , pvc waste coupling 32 mm , aluminium anodised handle 100 mm , excel acrylic emulsion terracoda , ppr pipe 25 mm dia 3 layer with socket , pvc bend for cistern , ppr union socket 50 mm , ppr gate valve 50 mm , tee gi red 20 by 20 by 15mm , pvc stop cock 20 mm , synthetic enamel paint white colour , union gi 15 mm , ppr union socket 25mm , ppr pipe 40 mm dia 3 layer with socket , tee gi 20 mm , socket gi reducer 15 by 20 mm , pvc pillar tap 15 mm , connection pipe wired 600mm , m seal 100 gms , elbow gi 20 mm , teflon tape 19mm , syphon kit for flushing cistern , nails 3 inch 75mm , ppr pipe clamp 20 mm dia , ppr union socket 40 mm , ppr pipe 32 mm dia 3 layer with socket , pvc tee 110 mm , ppr union socket 32 mm , gi union socket 25mm , tank socket gi 15 mm , aluminium barrel tower bolt 75 mm , u clamp 20mm dia , symphon kit for dual flushing cystern , pvc grating round type 140 mm , ppr elbow 90 degree 50mm , aluminium barrel tower bolt 100 mm , glazing putty oil glazed , gi socket 50mm , ppr reducing tee 40 by 25mm , pvc bend 75 mm , tank socket gi 20 mm , gi socket 25 mm , ppr elbow 90 degree 32mm , ppr brass l 20mm , ppr brass t 20mm , ppr t 20mm , ppr union 25 mm , plywood bwr 8 ft by 4 ft by 12 mm , plywood bwr with 3 ply 8 ft by 4 ft by 16 mm , foam sheet 6 ft by 3 ft by 75 mm , plywood bwr 8 ft by 4 ft by 6mm , plywood bwr 8 ft by 4 ft by 3mm , plywood bwr 8 ft by 4 ft by 4mm , plywood bwr 7 ft by 3 ft by 12 mm , foam cushion 530 by 530 mm , prelaminated mdf board 8 ft by 4 ft by 12mm , ply wood commercial one side teak face 9 ft

Aluminium Bar Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors