Latest aluminium facade Tenders | Government aluminium facade Tenders

Central Government And Public Sector

CTN :42761118

28 Nov, 2025 50.36 Lacs

Khammam-T - Telangana

Tender For overhauling of ash handling equipments - esp cleaning, plate valve overhauling, esp, ahp access door overhaul, rapping machanism overhaul, cerm, rapping machanism overhaul, derm, esp screen plate welding / repair, aph cleaning, hot zone ferrules replacement, cold zone ferruls replacement, maintenance of cerm/derm driving mechanism including gear box, bah seal trough cleaning and repair, bah nozzle repair, clinker grinder overhaaul, feed gate overhaul, linear welding, gas cutting, bending of 2mm to 3mm plate to fabrication of expansion bellow, pipe welding., ejector overhaul, repair/replacement of valves of sizes 3" to 8", repair/replacement of valves of sizes 1/2" to 3", replacement of mixing chambers, repair/replacement of spool pieces of aph, esp dfacs or expansion bellows including clearance of jam, replacement of cerm / derm main drive shaft, removal of ash in esp, aph and associated ducts during short shutdowns, providing dummys in ash slurry pipelines/ammonia dummys, hydro pnuematic converter tank repair / replacement, feed sump of clinker grinder repair / replacement, steel housing of clinker grinder repair / replacement, nozzle replacement for mixing chamber, replacing shock bar bolts with special washers, painting, scaffolding, fabrication/replacement / repair of worn out structural elements, repaire of hammers, supply of aluminum cladding sheet as per scope of work.

Central Government / Public Sector

CTN :42783899

20 Nov, 2025 NA

Sambalpur - Odisha

Tender For supply of 40watt well glass luminaries complete with aluminum die cast housing with epoxy powder coated with heat resistance poly carbonate diffuser, rated voltage 220-240v ac supply, with ip-65 or higher, cct: 6500k, luminary system efficacy: >120, cri: >70, with warranty 36 months similar to orient model no. orient electric 40w well glass fixture. make : orient/surya/halonix/baja or similar.

Corporations And Associations And Others

CTN :42741519

17 Nov, 2025 9.39 Lacs

Delhi - Delhi

Tender For providing and fixing of 210 nos.led street lights fitting with accessories at various locations in badarpur constituency ac-53.list of location attached. - led street light fixture, powder coated pressure die cast aluminum body (system lumen efficacy >135 lm/watt) supplying, installation, testing & commissioning of street light led fixture, powder coated pressure die cast aluminum body with built in or separate driver as per the requirement with driver efficiency >85%, input voltage: 140-270 volt ac, freq 50/60 hz, operating temp range -15 deg to 50 deg centigrade, internal surge protection of 5 kv l,n,e as per iec 61000-4 5, driver efficiency >85%,thd 10% as per iec 61000-3-2 , p. f. 0.95, ip 66,ik-10, cri >80 , under voltage and over voltage protection,emi emc as per cispr-15, lenses for beam angle as per iesna type i/ii/iii as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (led,driver & electrical circuitry) of minimum 50000 burning hours with 70% of initial lumen maintained till life ends as per lm80 extrapolation ies tm-21-11 report , cct 3000 k /4000 k / 5700 k /6000 k/6500 k (as per ansi bin) , sdcm(standard deviation color matching) 5, maximum power consumption should not more than the specified rating and fixture shall be of relevant bis standard complete in all respect i/c connections with 1.5 sq mm frls, pvc insulated copper conductor single core cable and earthing etc. as required with minimum 5 year oem warranty. system lumen efficacy >135 lm/watt output . lm79 & lm80 test report from nabl lab for all testing required for led fixtures as per bis shall be submitted. shape size and cct shall be as approved by engineer-in-charge as per requirement. (thermal management: heat sink of aluminum housing such that led junction temperature shall not rise above 90 c) 45 watt, supply and fixing of 32mm dia x 1 meter long g.i. pipe (medium class) bracket for mounting of fluorescent/hpmv/hpsv street light fitting on pole including bending the pipe to the required shape , 2 nos 25mm x 6mm flat iron clamps with nuts, bolts and washer , painting the flat iron with primer and finish paint etc. as reqd., laying of one number pvc insulated and pvc sheathed/xlpe power cable of 1.1 kv grade of following size in the existing masonry open duct as required. up to 35 sqmm, supply of xlpe insulated pvc sheathed al. conductor un-armoured cable 1.1kv grade conforming to is-7098 of following size:-2c*4 sqmm, supplying and drawing following sizes of frls pvc insulated copper conductor, single core cable in the existing surface/ recessed steel/ pvc conduit as required.3x1.5 sqmm

Central Government / Public Sector

CTN :42671907

25 Nov, 2025 NA

Vijayawada - Andhra Pradesh

Tender For supply of aluminum name tag for axle box housing of bvzi wheel set to ryps drg.no.ryps/scr//c&w/sk-1030.

CTN :42521821

20 Nov, 2025 5.28 Lacs

Paradip - Odisha

Tender For tender for supply of amplifier ssb 80 dfm with usb sd card etc , wireless microphone set awm 495 v2 , micro phone dm440 , pa music horn speaker amh402 t40 watt , emergency lights led 6 watt or more , instant geyser vertical wall mounting single phase 230 v plus or minus 10 percent 3 kw 3 ltr capacity isi marked stainless steel 304 inner container heating element incoloy glass coated outer container abs with 2 mtr flexible cable along with 3 pin plug of 16 amp , 25 ltr geyser isi marked vertical wall mounting pressure ratio 60 w by cm2 crca outer container copper inner container 2 mtr flexible cable along with 3 pin plug of 16 amp , 2 c x 2.5 sqmm al cts wire as per is 694 by 2010 latest isi marked type c hr insulation having type test report from govt. lab ornabl accredited lab or ilac accredited lab outer sheath type st 2 hr , 2 c x 4 sqmm al cts wire as per is 694 by2010 latest isi marked type c hr insulation having type test report from govt. lab or nabl accredited lab or ilac accredited lab outer sheath type st 2 hr , 2 c x 6 sqmm al cts wire as per is 694 by 2010 latest isi marked type c hr insulation having type test report from govt lab or nabl accredited lab or ilac accredited lab outer sheath type st 2 hr , 36 watt 2inch by 2inch recess mounted led light colour temperature 65000 k light intensity 100 lm per watt led chip efficacy greater than equal to 130 square shape 600 mm x 600mm diffuser materials poly carbonate uv stabilized working light 15000 hours colour rendering hours or equal to80 ingress protection ip 20 body die cast aluminum or crca or extruded aluminum warranty 03 years having lm 79 lm 80 and tm 21 test report issued from central govt laboratory or nabl accredited lab or ilac accredited lab as per is 10322 by part5 by section 2 , pedestal fan 500mm as per is 1169 1967 latest maximum input 90 watt minimum air delivery 90 m3 by min no of aluminum blade 3 adjustable height minimum 1100 mm maximum 1400mm knob regulator 3 speed copper winding metal body colour white double ball bearing steel fan stand with base class e insulation 5 mtr flexible cord sheathed cable isi mark , high speed wall mounted oscillating type fan as per is 555 latest bracket mounted fan capacitor type motor speed control mechanism pull cord or string based control no of abs blades 3 colour white double ball bearing copper winding 1 point 5 mtr flexible cord warranty 01 year , pwr 1 point 1 kv pvc al by ar cable 3core xlpe insulated 10 sqmm as per is7098 part i 1988 latest isi marked inner sheath thermo plastic galvanized round steel wire armored having type test report from govt lab or nabl accredited lab or ilac accredited lab , 300 watt led flood light housing materials aluminum die casting lumens efficiency greater than 130 lm per w single phase 230 volt 50000 light burning hours weather protection ip 66 beam angle 120 degree warranty 03 years lm 79 lm 80 and tm 21 test report issued from central govt laboratory or nabl accredited lab or ilac accredited lab as per is 10322 by part 5 by section 2 and is 16107 minimum internal protection against surges and transients 5 kv minimum external protection against surge and transients 10 kv , 36 watt post top led light fitting , housing materials aluminium die casting , lumens efficiency greater than 90 lm per w main current 125 ma single phase 230 volt 50000 light burning hours powder coated finish weather protection ip 65 , 6 amp flush type 03 pin wall socket brass or copper current caring materials screw type terminal body polycarbonate isi marked warranty 1 year , step type electronic fan regulator no of steps 4 body polycarbonate rated power 90 watt , tranparent pvc type led strip light warm white 130 lumen per watt 10 watt rope light wattage per meter provoide closed end cap isi marked as per lm 80 is16106 working life in hours should be minimum 50000 as per lm 80 ip protection ip 65

Central Government/Public Sector

CTN :42499854

19 Nov, 2025 NA

Multi City - Multi State

Tender For supply of led four feet tube light fitting 20/22 watts batten, housing : aluminum extrusion finish white powder coated , colour : cool white , diffuser milky white , 100 lumens/watts., temperature (k) : 6000+/-500 , beam angle (in degree) > / = 120 , operating voltage range (in volts) 160 to 270, rated voltage (in volts) 220 to 240 - 50hz , power factor > / = 0.9, surge voltage withstand (in kv) 2.5/4, cri > 80% . ip - 20/21. make: philips, wipro,havells, crompton, polycab, jaquar only. note: (1) oem proof of purchase to be submitted along with the material supplied. [ warranty period: 60 months after the date of delivery ]

Aluminium Facade Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

Central Government / Public Sector

Corporations And Associations And Others

Central Government / Public Sector

Central Government/Public Sector