Latest aluminium facades Tenders | Government aluminium facades Tenders

State Government

CTN :45285975

28 May, 2026 1.21 Crore

Daman - Gujarat

Tender For providing and supplying modular furniture for newly constructed government school building at kachigam, nani daman. - civil works, providing supply and installation of corner sink table -size :-1100mm l x 1100mm d x 900mm hconstruction : floor based welded cabinet system having storage body should be flush face construction with intersection of vertical and horizontal members like lh and rh side panel along with front horizontal channel, back panel and bottom panel. it should be relocated anywhere easily as it is an independent unit. cabinet should of square non-sharp edge construction. doors should be assembled with ss-304 hinge assembly. removable back panel should be provided to easily access the service lines running behind the cabinet benches. intermediate horizontal channels should be provided between door and drawer. toe-space of 90mm x 90mm is provided at front-bottom side of cabinet. levelers are provided for easy leveling of welded cabinet. shelf should be eight-bend panel with 20mm height. drawer tray should be of single piece construction. drawer should be well supported on lh and rh ball slide suspension system. steel door and drawer front should be of double wall construction with sound dampening material filled inside. doors should be easily removable and hinges should be easily replaceable. knee space panel should be in 22 gauge , cabinets are tested as per sefa 8m standard from a sefa approved lab and also tested as per en 14727 from a third party testing agency having nabl accreditation. dimensions : w= 900 mm, d = 900 mm, h = 875 mm configurations: 1 shutter - 1 nos moc: mscrca: is 513 (1994) thickness: lh/rh side panels, shutter front, bottom panel, top front, drawer separator, shelf, alignment channel is of 1.2mm thk. removable back panel, shutter cover, fr. rack strip, top cover panel is of 0.8mmthk. finish: powder coating pure epoxy, thickness 40-50 microns , followed with 9 tank pre treatment process the thickness of powder coat should be 45-50 microns, which passes the test of salt spray for 1000 hours. it should have a high temperature withstanding capacity with excellent electrical insulation properties.the rear portion of above accessories which is in contact with live metal should be made from thermo set material which will not melt on heating.handle : anodized aluminum recessed-type, ctc: 160.0mm lock: units have a locking facility with 180 and 10 lever cam lock mechanism (except for sink and corner unit) hinge: ss hinge screw: ss 304.shutter : should be of twin-type construction with sound dampening effect using profill.shutter cover should be equipped with bump on for sound dampening. base moulding should be made of pvc with corner clips. ball slide: 500mm length shutter should have provision of roller catch.pp sink,polypropylene molded sinks: made up of 5 mm thick high density and elastic poly propylene with good resistance to organic solvents. sink - bowl size to be a minimum of (l x w x d) 560 x 355 x 300 mm.faucet - 3-way type faucet as per approved makeworktop : jet black granite: it should be 19mm (+/- 2mm) thick jet black granite worktop. the exposed edges of the worktop should be chamfered and smoothened. the bottom of the worktop should be polished and there should be a v-groove throughout the length of the exposed edges to protect the cabinets from coming in contact with the spillages. the overhang on the storage cabinet is 25 mm at the front side and 30 mm at the sides. the backing material used is a neoprene mat of 6 mm thickness. (make as per selection of architect or selection of higher authority), providing supply and installation of corner table - size 1100mm l x 1100mm d x 900mm hconstruction: floor based welded cabinet system having storage body should be flush face construction with intersection of vertical and horizontal members like lh and rh side panel along with front horizontal channel, back panel and bottom panel. it should be relocated anywhere easily as it is an indepe

corporations/Associations/Others

CTN :45111401

14 May, 2026 5.14 Lacs

Chandigarh - Chandigarh

Tender For providing and fixing new children play equipments in various parks of sector 27 and 28 chandigarh under ward development fund. - providing and fixing of horizontal bridge ladder 10 long, high, 2 wide made of m.s.angle /pipe completed as per ca s drg.no.02 of job no.m-02., m.a.p.s.(jumbo 3 x 1)sr.no. description qty.1. standard see saw 01 no.2. double swing 01 no.3. wave slide 5 ht. 01 no.area : 4m x 4msafe area : 5m x 5m(jumbo 3 x 1 ) set consist of standard see saw:this items provides a good entertainer for children. the seats of the see saw are made from rotational molding and the see saw stand is fitted on 40 nb gi pipe. the level is of 15 nb & 25 nb pipes. the bearing used is a heavy-duty bush type.double swingin the double swing the leg support is bending made of 40nnb gi pipes and top pipe is 50nb gi pipes with gi junction box with powder coating. the swing seat is made up of 10mm thick rubber belt. the belt seat is affixed on 6mm rubber coated gi chain. the ball bearings are mounted inside a specially designed nylon clamp.wave slide: the wave slide chute shall be made up of 4mm thick of fiber reinforced plastic with self-pigmented. the wave shape should be in such manner that it will not give any jerk or bump to the rider. the chute has its end such as it causes safe landing of the child. the landing portion should be in horizontal with respect to the ground. there should be support provided made up of 25 nb gi pipe., multi activity play systemspecifications:-s.no. description qty.1 sq. deck 7 -0 h with canopy 12 sq. deck 5 -0 h with canopy 13 sq. deck 3 -0 h with canopy 14 sq. deck 4 -0 x 4 -0 with 3 -0 ht 15 straight inclined bridge 4 -0 long 16 swing bridge 8 -0 long 17 spiral slide 5 -0 ht 18 double wave slide 7 -0 ht. 19 cross stairs 5 -0 ht 110 ladder 7 -0 ht. 111 triangular stairs 3 ht. 112 split level ladder 113 double wave slide 3 -0 ht. 114. expansion ladder 7;-0 & 3 -0 2brief descriptions/sizes of different components of multiplay systems:-i. square deck of size 4 -0 x 4 -0 :- the size of sq. deck shall be 4 -0 x 4 -0 . the vertical supporting pipes shall be of minimum size 80 nb g.i. pipes or as required with nylon roof clamps attached to its. the horizontal supporting members shall be of m.s. angle of minimum size 40x40x5 mm or as required. the platform of the ladder shall be of aluminum chequred plate of minimum thickness 16 swg or as required. ii. canopy: - the canopy over square deck shall be made in two layers of fiber reinforced plastic with minimum thickness of 3 mm and the same shall be supported on structural framework of m.s. square pipe. the layers of iso gel coat shall be applied over canopy and two extra layers on the flange. the colour, design and finish of the outer surface of the canopy shall be as approved by engineer-in-charge.iii. double wave slide 3 -0 ht.:- this shall be made of frp having minimum shell thickness of 4 mm. the backside of the slide surface shall be mat finished. the layers of tooling gelcoat shall be applied to the slide to give it smooth finish. the supporting frame of the slide shall be made from g.i. pipe of minimum size 25 nbv. the pipes shall be powder coatediv. double wave slide 7 -0 ht.:- this shall be made of frp having minimum shell thickness of 4 mm. the backside of the slide surface shall be mat finished. 5 layers of tooling gelcoat shall be applied to the slide to give it smooth finish. the supporting frame shall be made from g.i. pipe of minimum size 25 nb. the pipes shall be powder coated. additional h type support shall be provided in the center.v. spiral slide 5 -0 :- the spiral slide chute shall be made of frp having minimum shell thickness of 4 mm and the same shall be supported on center support of g.i. pipe having minimum size of 80 nb. the backside of the slide surface shall be mat. 5 layers of tooling gelcoat shall be applied to the slide to give it smooth finish. the landing module shall be supported on gi pipe of minimum size 20 nb powder c

corporations/Associations/Others

CTN :45151624

18 May, 2026 5.14 Lacs

Chandigarh - Chandigarh

Tender For providing and fixing new children play equipments in various parks of sector 27 and 28 chandigarh under ward development fund. - providing and fixing of horizontal bridge ladder 10 long, high, 2 wide made of m.s.angle /pipe completed as per ca s drg.no.02 of job no.m-02., m.a.p.s.(jumbo 3 x 1)sr.no. description qty.1. standard see saw 01 no.2. double swing 01 no.3. wave slide 5 ht. 01 no.area : 4m x 4msafe area : 5m x 5m(jumbo 3 x 1 ) set consist of standard see saw:this items provides a good entertainer for children. the seats of the see saw are made from rotational molding and the see saw stand is fitted on 40 nb gi pipe. the level is of 15 nb & 25 nb pipes. the bearing used is a heavy-duty bush type.double swingin the double swing the leg support is bending made of 40nnb gi pipes and top pipe is 50nb gi pipes with gi junction box with powder coating. the swing seat is made up of 10mm thick rubber belt. the belt seat is affixed on 6mm rubber coated gi chain. the ball bearings are mounted inside a specially designed nylon clamp.wave slide: the wave slide chute shall be made up of 4mm thick of fiber reinforced plastic with self-pigmented. the wave shape should be in such manner that it will not give any jerk or bump to the rider. the chute has its end such as it causes safe landing of the child. the landing portion should be in horizontal with respect to the ground. there should be support provided made up of 25 nb gi pipe., multi activity play systemspecifications:-s.no. description qty.1 sq. deck 7 -0 h with canopy 12 sq. deck 5 -0 h with canopy 13 sq. deck 3 -0 h with canopy 14 sq. deck 4 -0 x 4 -0 with 3 -0 ht 15 straight inclined bridge 4 -0 long 16 swing bridge 8 -0 long 17 spiral slide 5 -0 ht 18 double wave slide 7 -0 ht. 19 cross stairs 5 -0 ht 110 ladder 7 -0 ht. 111 triangular stairs 3 ht. 112 split level ladder 113 double wave slide 3 -0 ht. 114. expansion ladder 7;-0 & 3 -0 2brief descriptions/sizes of different components of multiplay systems:-i. square deck of size 4 -0 x 4 -0 :- the size of sq. deck shall be 4 -0 x 4 -0 . the vertical supporting pipes shall be of minimum size 80 nb g.i. pipes or as required with nylon roof clamps attached to its. the horizontal supporting members shall be of m.s. angle of minimum size 40x40x5 mm or as required. the platform of the ladder shall be of aluminum chequred plate of minimum thickness 16 swg or as required. ii. canopy: - the canopy over square deck shall be made in two layers of fiber reinforced plastic with minimum thickness of 3 mm and the same shall be supported on structural framework of m.s. square pipe. the layers of iso gel coat shall be applied over canopy and two extra layers on the flange. the colour, design and finish of the outer surface of the canopy shall be as approved by engineer-in-charge.iii. double wave slide 3 -0 ht.:- this shall be made of frp having minimum shell thickness of 4 mm. the backside of the slide surface shall be mat finished. the layers of tooling gelcoat shall be applied to the slide to give it smooth finish. the supporting frame of the slide shall be made from g.i. pipe of minimum size 25 nbv. the pipes shall be powder coatediv. double wave slide 7 -0 ht.:- this shall be made of frp having minimum shell thickness of 4 mm. the backside of the slide surface shall be mat finished. 5 layers of tooling gelcoat shall be applied to the slide to give it smooth finish. the supporting frame shall be made from g.i. pipe of minimum size 25 nb. the pipes shall be powder coated. additional h type support shall be provided in the center.v. spiral slide 5 -0 :- the spiral slide chute shall be made of frp having minimum shell thickness of 4 mm and the same shall be supported on center support of g.i. pipe having minimum size of 80 nb. the backside of the slide surface shall be mat. 5 layers of tooling gelcoat shall be applied to the slide to give it smooth finish. the landing module shall be supported on gi pipe of minimum size 20 nb powder c

Central Government And Public Sector

CTN :45025201

07 May, 2026 NA

Nagpur - Maharashtra

Tender For supply of aluminum alloy pop blind rivet with steel mendral specn rivet diameter 4.0 mm (+00, -0.1) , hole size 4.1 mm , rivet length 12 mm +/-0.2, grip range 6.1 to 8.1 , head diameter 7.8 mm, head thickness1.3, tensile strength min. 130 lbs & shear strength min. 90 lbs alu. % - 99 min. to is: 740/77 designation 19000 and steel portion to is: 1875/1992 class (2a) designation 14c6 class -1 length 45 mm (min) overall. as per specn. 740/77 steel portion to is.1875/92 class 2/a designation 25 c8 [ warranty period: 30 months after the date of delivery ]

Central Government And Public Sector

CTN :44933116

27 Apr, 2026 NA

Raipur - Chhattisgarh

Tender For supply of file straw board to size- 23cm x 35 cm (+/- 1 cm) with 8 cm clear spines excluding pasting portion of the flap along with 2 nos of transparent perplex sheet of size- 150mmx25mmx2mm with 2 holes centrally punched with 7.9cm distance between the hole. file material is of 2.5 mm to 3mm thick straw board. binding cloth to be pasted on all the edges of each flap in apportion of 20 mm & also on the middle portion of both parts , spines at centre joint space in a width of 14-15cm along the length of file. file should be punched & eyeleted with 4 nos aluminum eyelets- two on each flap at a distance of 1.5cm to 2 cm from the left edge of each flap. 2 nos of good quality cotton tag/lace of lengthapprox 60 cm & dia 3-4 mm to be inserted in the tag holes. one(1) cotton tape of 100 cm x (12-15)mm width x 2mm thickness should be inserted throughout the two inners made at the middle portion of backside of the file cover. binding cloth is to be of good quality & color should be dark blue. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :44843790

17 Apr, 2026 NA

Kota - Rajasthan

Tender For corrigendum : supply of goods warning board and detailed description as follows- warning cum sighting board for goods train size 1800 mmx 535 mm made of 3 mm aluminum composite panel with back supporting frame of 35mm x35mm x 3 mm iron angle. the yellow portion of the board shall be cut out from yellow high intensity prismatic grade retroreflective sheet. as per drawing attached. note- material should be supplied as per description of the material mentioned. and sample must be approved before supply of the material. [ warranty period: 12 months after the date of delivery ]

CTN :44624212

13 Apr, 2026 95.70 Lacs

Kamrup - Assam

Tender For corrigendum : providing aluminum net and ms net portion at all the corridor and mosquito proof net at the all bathrooms from ground floor to 3rd floor of a, b, c and d- block at subansiri hostel in iit guwahati campus

Central Government/Public Sector

CTN :43938777

08 Apr, 2026 NA

Bangalore - Karnataka

Tender For bid to ras supply of mounted points : : -"mounted point w178 mounted point shape w178 size 9 53 x 31 x 6 35 mm shank length 50 8 mm excluding mounted portionspecification a60pv", " mounted points w 177 shape w177 size 9 52 x 19 05 x 6 35 mm shank length 50 8 mm excluding mounted portionspc a 80 pv2", "mounted point shape w178 size 9 53 x 12 7 x 6 35 mmshank length 50 8 mm excluding mounted portion specification a60 pv", "mounted point a15 a15 27 shape a15 size 6 35 x 26 99 x 6 35 mm shank length 50 8mm excluding mounted portionspecification a60 pv", "mounted point al oxide shape a 15 mounted dia 6 35mm x mounted length 26 99mm and shank spindle dia 6 35mm x 50 8mm length after mounting colour bluematerial spec ceramic aluminum oxidemix of white aluminium oxide and blue ceramic sintered aluminium oxide in a vitrified bondmetal to be groud titanium nimonic steel and steel alloys hrc 30 40 operation polishing finishing and removal mixing of weld under beadoperating speed 25000 rpm to 35000 rpmgrit 60tolerance 0 25 mm", "mounted point b52 shape b52 size 9 53 x 19 05 x 6 35 mm shank length 28 58 mm excluding mounted portionspecification a60 q5 v", "mounted point shape w217 size 25 4 x 9 53 x 6 35 shank length 50 8 excluding mounted portionspecification a60 pv", "mounted point shape w170 size 7 94 x 12 7 x 3 18 mmshank length 50 8 mm excluding mounted portion spec a60 pv", "mounted point alo oxide shape a4 a4 60 spindle dia 6 35mm sh l 50 8mm size 31 75 x 31 75 x 6 35 mmshank length 5 8 mm excluding mounted portioncolour white specification aa46 p5v8"

State Government

CTN :44748225

05 May, 2026 NA

Surendranagar - Gujarat

Tender For special repair to repairing of registrar quarter (category-d) opposite tagore portion at special repairndranagar (providing cooking shed, aluminum section etc.) (job no. special repairnr/25-26/25)

CTN :44689833

06 Apr, 2026 NA

Bokaro - Jharkhand

Tender For supply, design, fitment of aluminum composite panel with aluminum frame for surge testing machine ,size- height 74inch, length 34 inch width 34 inch, door size 51 inch x 24 inch, acrylic glass for upper door portion 23 inch, locking system should be provide in door, all side must be cover with aluminum composite panel [ warranty period: 30 months after the date of delivery ]

Aluminium Facades Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors