Latest aluminium oxide Tenders | Government aluminium oxide Tenders

CTN :42716376

15 Dec, 2025 NA

Katni - Madhya Pradesh

Tender For bid to ras supply of ramming mass dry type-j-2

CTN :42716410

15 Dec, 2025 NA

Katni - Madhya Pradesh

Tender For bid to ras supply of ramming mass daka dry type-jsq

Central Government/Public Sector

CTN :43155965

19 Dec, 2025 NA

Salem - Tamil Nadu

Tender For tap hole ramming mass m95 (90mt).

CTN :43129103

20 Dec, 2025 NA

Bangalore - Karnataka

Tender For supply of acid ramming mass

CTN :43140952

31 Dec, 2025 NA

Bijnor - Uttar Pradesh

Tender For supply of polishing cloth (microcloth) self adhesive,emery paper, aluminium oxide/silicon carbide , non-self adhesive & others

CTN :42998990

30 Dec, 2025 1.07 Crore

Bahraich - Uttar Pradesh

Tender For akankshi nagar yojanantargat nagar panchayat payagpur men block parisar ke andar khali bhoomi par adhyayan kendra ki sthapna hetu library ka nirman karya. - earth work in excavation by mechanical means (hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. all kinds of soil. as per dsr no.-2.8.1, filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m as per dsr no.-2.25, providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level : 1:4:8 (1 cement : 4 coarse sand (zone-iii) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) as per dsr no.-4.1.8, supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. as per dsr no.-2.27, treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 coarse sand) to match the existing floor: with chlorpyriphos/lindane e.c. 20% with 1% concentration. as per dsr no.-2.35.3.1, reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand(zone-iii) derived from natural sources : 3 graded stone aggregate 20mm nominal size derived from natural sources). as per dsr no.-5.2.2, reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-iii) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). as per dsr no.-5.3, ground floor, first floor, as per dsr no.-5.3b, as per dsr no.-5.3b, providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - all work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-iii) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). as per dsr no.-5.1.2, centering and shuttering including strutting, propping etc. and removal of form for. as per dsr no.-5.9, foundations, footings, bases of columns, etc. for mass concrete. as per dsr no.-5.9.1, lintels, beams, plinth beams, girders, bressumers and cantilevers. as per dsr no.-5.9.5, columns, pillars, piers, abutments, posts and struts. as per dsr no.-5.9.6, brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in foundation and plinth in. as per dsr no.-6.1.1 & 6.1.2, cement mortar 1:4 (1 cement : 4 coarse sand), cement mortar 1:6 (1 cement : 6 coarse sand), cement mortar 1:6 (1 cement : 6 coarse sand), cement mortar 1:6 (1 cement : 6 coarse sand), providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-iii) derived from natural sources : 4 graded stone aggregate 12.5mm nominal size derived from natural sources) as per dsr no.-4.10, providing & applying a coat of residual petroleum bitumen of grade of vg-10 of approved

Central Government/Public Sector

CTN :42825963

16 Dec, 2025 42.65 Lacs

Allahabad - Uttar Pradesh

Tender For corrigendum : provision of pol stores for microlight base elect section tool crib addn altn of roof sheet provn of view cutters and other allied work at certain location of af station under ge af bamrauli - surface dressing n exc 15 cm deep in soft/loose soil, complete all as specified and directed., excavation in trenches for n.exc 1.50m wide not exceeding 10 sqm on plan and n.exc 1.5m in depth in soft/ loose soil and getting out, complete all as specified and directed., excavating over areas hard & dense soil, n. exc 1.5 m deep and getting out, complete all as specified and directed., m&l for pcc 1:4:8 type d2 graded stone aggregate cement concrete in flooring, foundation, filling and mass, complete all as specified and directed., returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. complete all as specified and directed., removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m. complete all as specified and directed., m&l for hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface, complete all as specified and directed., m& l for rcc type b1, (1:2:4) nominal mix (20mm grade aggregate) foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc., basement slabs, complete all as specified and directed., m&l for rcc (20mm grade aggregate type b1 (1:2:4) nominal mix columns, pillars, piers, posts and struts, complete all as specified and directed., m&l for rcc type b1, (1:2:4) nominal mix (20mm grade aggregate slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like all as specified and directed., m&l for rcc type b1, (1:2:4) nominal mix (20mm grade aggregate) beams, cantilevers, bressummers, lintels over 1.5m span all as specified and directed., m&l for rcc type b1, (1:2:4) nominal mix (20mm grade aggregate to chajjas, complete all as specified and directed., m&l for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work, vertical or to batter, complete all as specified and directed., m&l for formwork to sides of pillars, posts, struts, piers, columns and stanchions, complete all as specified and directed., m&l for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (horizontal or sloping), complete all as specified and directed., m&l for formwork to sides and soffits of floor or roof beams, beam haunch ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed., m&l for formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of rcc/pcc bands in walls, horizontal or sloping, and similar work all exceeding 20cm wide, complete all as specified and directed., s&f for mild steel tmt bars 10mm dia and over, cut to length, bent to shape required, includingcranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed., s&f for mild steel tmt or twisted bars 6 to 8 mm dia as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia as in stirrups etc. complete all as specified and directed., m& l for pcc 75mm thick type c-1 ,1:3:6 using 20mm graded stone aggregate as in plinth protection, complete all as specified and directed., m&l for brick work with sub class b bricks, straight

Central Government/Public Sector

CTN :42918715

16 Dec, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : supply of 3800694, taphole ramming mass

Central Government/Public Sector

CTN :43070483

26 Dec, 2025 NA

Ahmedabad - Gujarat

Tender For supply of lab chemicals c c - acetone , carbon disulphide , conc. sulphuric acid , cyclohexane , dichloromethane , heptane , methanol , nhexane , toluene , potassium hydroxide , petroleum ether , isopropylalcohol , xylene , ammonia solution , millipore 45 micron hv filter paper , filter millipore syringe 0. 45 micron , 1 ml syringe barrel without needle , 2 ml syringe barrel without needle , pipette pump 1 ml , pipette pump 2 ml , pipette pump 5 ml , pipette pump 10 ml , pipette pump 25 ml , big tissue paper roll , l nitrile gloves , activated aluminium oxide