Latest aluminium paint Tenders | Government aluminium paint Tenders

State Government

CTN :45440516

11 Jun, 2026 NA

Warud - Maharashtra

Tender For material supply for construction of gp bhawan - material supply, 80mm metal, 40mm metal, 20mm metal, murum, bricks, emulsion paint, concrete mixer, cement 50kg bag with isi mark, fine sand, steel tmt 500 (8 mm 10 mm 12mm 16mm), vitrified tiles, pvc pipe110mm, ceramic tiles, syntex tank, 15mm pipe, 20mmpipe, wheel stop, grill, sliding window, ventilaters, channel gate, cement frame, acrylic plastic sheet panel (door), door frame (sagwan), primer, water proofing cement paint, paver block, distemper, engrave marble naming plate size 90*60cm

State Government

CTN :45414540

08 Jun, 2026 NA

Prayagraj - Uttar Pradesh

Tender For repair, maintenance and painting work sq ft 26700 complete with cement mortar plaster, using birla/asian wall putty for smoothing surface and two or more coats of oil bound acrylic emulsion paints and synthetic enamel paints good quality

Central Government And Public Sector

CTN :45441140

19 Jun, 2026 1.47 Crore

Tuticorin - Tamil Nadu

Tender For supply and application of hot thermal insulation on pipe lines and equipment at hwp, tuticorin - supply and apply of inhibited lightly resin bonded machine laid machine stitched rockwool mattresses (lrb) having density 128 kg/m3 backed with one side ss hexagonal wire netting of size 3/4" x 22 swg for pipelines below inches. for . this material shall conform to is: 8183. ,0.5"nbxthick 25mm, 0.75"nbxthick 25mm, 1"nbxthick 25mm, 1.25"nbxthick 25mm, 1.5"nbxthick 25mm, 2"nbxthick 30mm, 2.5"nbxthick 30mm, 3"nbxthick 30mm, 4"nbxthick 30mm, 5"nbxthick 30mm, 6"nbxthick 40mm, 6"nbxthick 50mm, 8"nbxthick 40mm, 8"nbxthick 50mm, 10"nbxthick 40mm, 12"nbxthick 50mm, 14"nbxthick 50mm, 16"nbxthick 50mm, 18"nbxthick 50mm, supply and apply of inhibited lightly resin bonded machine laid machine stitched rockwool mattresses (lrb) & loose wool (loose fill)having density 128 kg/m3 backed with one side ss hexagonal wire netting of size 3/4" x 22 swg for the vessels / equipments mentioned below.this material shall conform to is: 8183. 31c1,50 mm thick, 14v6,40 mm thick, 14h1,60 mm thick, 14s3,40 mm thick, 14v2,40 mm thick, 12e2,40 mm thick, removal of hot insulation from pipe lines up to 6", removal of hot insulation from pipe lines above 6", removal of hot insuation from equipmet, erection and de-erection of scaffolding at various locations in the plant required for application of paint & insulation., mechanised surface cleaning using flap wheel machine , application of two coats of 30 micron thick each bituminous black/heat resistant aluminium paint for pipelines / equpments prior to application of hot/cold insulation.supply of heat resistance aluminium paint for temperature up to 600 deg *c as per is:3384, wherever insulating the pipe lines which are found to be no u clamps, shoes and saddle supports same shall be fabricated and proveded by smaw welding and shall be fixed with ismc sheets and new fasteners. the required ms plate and fasterners will be supplied by the deaprtment as free issue material. whereever gratings and structrues are foulig for insulation of pipe lienes asmae shall be rectified prioar to insualtion.

CTN :45439271

18 Jun, 2026 NA

Hoigebazar - West Bengal

Tender For engagement of sub-contractor for grit blasting of structural components followed by aluminium metallizing, one coat of etch primer one coat of zinc chromate one coat of aluminium paint along with marking of partsas sub contract basis for works contra

CTN :45289871

13 Jun, 2026 40.00 Lacs

Awantipora - Jammu And Kashmir

Tender For corrigendum : stage contract for carrying out various electrical maintenance works including sitc, itc of various line materials and distribution substations and dismantling of existing deteriorated out lived electrical infrastructure for the year 2026-27 under th - supply, installation, testing and commissioning of 3-phase 25 kva distribution transformers with bimetallic terminal connectors energy level-2, (al wound ), and with lv cable box having detachable aluminium gland plate, supply, installation, testing and commissioning of, 3-phase 63 kva distribution transformers with bimetallic terminal connectors energy level-2, (al wound ), and with lv cable box having detachable aluminium gland plate, supply, installation, testing and commissioning of, 3-phase 100 kva distribution transformers with bimetallic terminal connectors energy level-2, (al wound ), and with lv cable box having detachable aluminium gland plate, supply, installation, testing and commissioning of, 3-phase 200 kva distribution transformers with bimetallic terminal connectors energy level-2, (al wound ), and with lv cable box having detachable aluminium gland plate, supply, installation, testing and commissioning of, 3-phase 250 kva distribution transformers with bimetallic terminal connectors energy level-2, (al wound ), and with lv cable box having detachable aluminium gland plate, sitc of 11 mtr long st poles 410, sp-56 including transportation, manual, mechanical carriage, delivery at site with pit excavation, refilling the pit with soil, boulders., sitc of 9 mtr long st poles 410, sp-33 including transportation, manual, mechanical carriage, delivery at site with pit excavation, refilling the pit with soil, boulders., sitc of 8 mtr long st poles 410, sp-15 including transportation, manual, mechanical carriage, delivery at site with pit excavation, refilling the pit with soil, boulders., sitc of 8 mtr long pcc poles including manual, mechanical carriage, excavation of pole pits with inscription of permenent marking on each pole "name of scheme-2019-20/xx" (xxx mean pole numbers say 01,02...) in white paint in backgound of green paint at conspicious place, providing & fixing of pole earthing as per rec standard as per j-1 (spiral earthing) drawing, supply,fixing of spike earthing rod 20mm 2,5 mtr long with gi strip (25x3)mm, supply and painting of each pole 1 coat red oxide paint and 2 coats of aluminium paint (@ 1 ltr/pole red oxide paint and 1 ltr/pole aluminium paint), providing, errection, testing & commissioning of channel cross arms, v-cross arms, sub-station channels & angle iron braces, transformer beltings, including back clamps for fixing cross arms etc fabricated out of galvanized iron of different sizes (rec standard) & to be fixed with gi nuts & bolts and washers., providing, errection, testing & commissioning of channel cross arms, v-cross arms, sub-station channels & angle iron braces, transformer beltings, including back clamps for fixing cross arms etc fabricated out of mild steel of different sizes (rec standard) & to be fixed with gi nuts & bolts and washers., providing & and fixing of 11 kv pin insulators (polymer) with pins ( 5 kn), providing & fixing of 11 kv, g.o ab switch , 3-phase, 200a (09 insulator post type) with arragement for pad locks & operating rod . the operating rod should be g.i pipe (b-class) of 25 mm dia of requisite length., providing & fixing of 11 kv horn, gap fuse 3-phase 100a, providing & fixing of 11kv link set 3-phase, 200 a (station type), sitc of 11kv isolator double break, 3-pole, 630 amps, horizontal mounting type , with earth switch, providing & fixing supply and installation of gapless surge arrestor,9 kv,10 ka, la with (polymer) housing, station type, providing & fixing of lt fuse set of suitable capacity for 63kva,100kva,200kva (as per tender drawing attached), providing & fixing of 11 kv disc insulators (polymer) complete with fitting( 4

corporations/Associations/Others

CTN :43766038

08 Jun, 2026 NA

Cuddalore - Tamil Nadu

Tender For bid to ras bid to ras bid to ras corrigendum : supply of enamel, synthetic, exterior (a) undercoating (b) finishing (v4) confirming to is 2932 (q3) , aluminium paint for general purposes in dual container as per is 2339 (q3) , thinner for epoxy paints (bhel) (q3)

State Government

CTN :45427475

11 Jun, 2026 NA

Kangra - Himachal Pradesh

Tender For tender for supply of equipment material, design, erection, testing commissioning for sop to pump house constructed at jakhota-i bohal khalsa under hpshiva project w.r.t. horticulture development block dehra in electrical section bharoli under esd 1 - supply part of lt line with aaac 7/3.15 (0.323 km), steel tubular poles 8 mtr. long with base plate, steel tubular poles 9 mtr. long with base plate, muff for steel tubular pole with concrete filling, aaac conductor 7/3.15, 55 sq. mm ( includes 3 conductor length and additional 1% sag (sag, jumpering and wastage)), lt ab cable [size 4x70+1x70+1x16 sq. mm] x 2 cable, pvc (1.1 kv, ai, un-armour 3.5 x 35 sq. mm, single continuous earth wire (g.i wire 8 swg), channel iron (75x40x4.8 mm), length 1.50 mtr + 0.2 mtr}, shackle insulator, d-iron, stay set complete, stay wire, earthing set lt complete in all respect, earth knob, half clamp, full clamp, nuts & bolts off sizes, spiral pvc spacer, aluminium paint, red oxide point, supply part of aug. of 63 kva to 100 kva distribution sub-station, aluminium thimble 120 sq mm, lt cable 3.5 core 120 sq. mm, chain link fencing, angle iron, gate etc. for transformer fencing, 3-ph, 4-wire trivector meter 200/5 a, erection part of lt line, erection charges & transportation charges complete in all respect of lt line, erection part of aug. of 63 kva to 100 kva dtr, erection charges & transportation charges complete in all respect of aug. of 11/0.4 kv, 63 to 100 kva dtr

State Government

CTN :45427476

11 Jun, 2026 NA

Kangra - Himachal Pradesh

Tender For tender for supply of equipment / material , design, erection, testing & commissioning for sop to civil hospital jawalamukhi by providing 11/0.4 kv, 400 kva dtr a/w 11 kv ht line in electrical section amb under esd hpsebl no-i jawalamukhi, ed jawalamukhi. - supply part of 11 kv ht line with aaac 7/3.81 (0.065 km), steel tubular poles 11 mtr. long with base plate, muff for steel tubular pole with concrete filling, aaac conductor 7/3.81, 80 sq. mm ( includes 3 conductor length and additional 1% sag (sag, jumpering and wastage)), single continuous earth wire (g.i wire 8 swg), cross-arm {channel iron (100x50x6 mm), length 1270 mm}, 11 kv pin insulators ( porcelain, 12 kv, 10 kn): 3 no. per pole structure, ai (50x50x6 mm), length 750 mm x2 no., x-bracing set -ms angle iron 50x50x6, length {2125 mmx2 no }, pole top bracket (100x50x6 mm), length 100 mm, ht stay set complete, stay wire, earthing set ht complete in all respect, eye hook for earth wire, barbed wire (rec sp f 3-1981), half clamp, full clamp, danger plate (250x200x1.6 mm), nuts & bolts off sizes, 11 kv g.o. switch, d.o fuse unit, aluminium paint, red oxide point, supply part of 11/0.4 kv 400 kva distribution sub-station, steel tubular poles 9 mtr. long, muffs with concerete filling, x-arm: [channel iron (100x50x6 mm), length : 2800 mm x 2 nos], ms angle iron (50x50x6 mm), length: 2800 mm x(1 nos for las), x-arm: [channel iron (75x40x6 mm), length : 2800 mm x 4 nos] for supporting do fuse unit & go switch, x-arm [channel iron (100x50x6 mm), length : 2800 mm x 2 nos for transformer bed, x-arm [channel iron (100x50x6 mm), length : 460 mm x 2 nos for supporting main channel of transformer, ms angle iron (50x50x6 mm), length : 2800 mm x 2 nos, ms angle iron 35x35x5 mm), length : 460 mm x 2 nos, ms angle iron 50x50x6 mm), length : 950 mm x 2 nos for bed knee bracing, ms angle iron (50x50x6 mm), length : 2800 mm x 2 nos for lt distribution box and go switch assembly, ms angle iron (50x50x6 mm), length : 450 mm x 1 nos for lt distribution box and go switch assembly, go switch handle supporting : [ channel iron (75x40x6 mm), length:460 mm, go ab switch unit (11kv, 400a, 25 ka ) triple pole o/d type, d.o fuse unit, surge arrester, 9 kv station class (porcelain type), discs insulator sets (comprising 1 no. disc: ^^(porcelain, bs, 12 kv, 90 kn) including dead end clamps etc.), stay set complete, stay wire, pipe earthing set, gi wire (6 swg) earth wire, half clamp (m.s. flat 50x6 mm), full clamp ( m.s flat 50x6 mm), nuts and bolts of various sizes (galvanised / coated), aluminium thimble 300 sq mm, copper thimble 95 sq mm, danger plate, barbed wire, lt cable 3.5 core 400 sq. mm, lt cable 3.5 core 70 sq. mm, aluminium paint., red oxide, transformer bed (civil work), chain link fencing, angle iron, gate etc. for transformer fencing, ct pt combined unit, energy meter (3-ph, 4-wire) dlms compliant 1000/5 a ct type for 400 kva dtr, pvc multistrand 2.5 sq mm copper wire, ms angle iron (50x50x6 mm) length 2800 mm x 4 nos., ms angle iron (50x50x6 mm) length 450 mm x 2 nos., erection part of 11 kv ht line, erection charges & transportation charges complete in all respect of 11 kv ht line, erection part of 400 kva dtr, erection charges & transportation charges complete in all respect of 11/0.4 kv, 400 kva dtr

State Government

CTN :45427477

11 Jun, 2026 NA

Kangra - Himachal Pradesh

Tender For tender for supply of equipment / material , design, erection, testing & commissioning for sop to pump house constructed at jakhota (sasan) & dhanot under hpshiva project w.r.t. horticulture development block dehra in electrical section adhwani under esd hpsebl no-ii jawalamukhi, ed jawalamukhi. - supply part of lt line with aaac 7/3.15 (0.070 km) sasan, steel tubular poles 8 mtr. long with base plate, muff for steel tubular pole with concrete filling, aaac conductor 7/3.15, 55 sq. mm ( includes 3 conductor length and additional 1% sag (sag, jumpering and wastage)), pvc (1.1 kv, ai, un-armour 3.5 x 35 sq. mm, single continuous earth wire (g.i wire 8 swg), shackle insulator, d-iron, stay set complete, stay wire, earth knob, nuts & bolts off sizes, aluminium paint, red oxide point, supply part of lt line with aaac 7/3.15 (0.325 km) dhanot, steel tubular poles 8 mtr. long with base plate, muff for steel tubular pole with concrete filling, aaac conductor 7/3.15, 55 sq. mm ( includes 3 conductor length and additional 1% sag (sag, jumpering and wastage)), pvc (1.1 kv, ai, un-armour 3.5 x 35 sq. mm, single continuous earth wire (g.i wire 8 swg), shackle insulator, d-iron, stay set complete, stay wire, earth knob, nuts & bolts off sizes, aluminium paint, red oxide point, supply part of aug. of 63 kva to 100 kva distribution sub-station sasan, aluminium thimble 120 sq mm, lt cable 3.5 core 120 sq. mm, surge arrestor 9 kv station, nuts & bolts off sizes, pipe earthing set, 8 swg gi wire for earthing, 3-ph, 4-wire trivector meter 100/5 a, supply part of aug. of 25 kva to 100 kva distribution sub-station dhanot, aluminium thimble 120 sq mm, lt cable 3.5 core 120 sq. mm, surge arrestor 9 kv station, nuts & bolts off sizes, pipe earthing set, 8 swg gi wire for earthing, 3-ph, 4-wire trivector meter 100/5 a, erection part of lt line sasan, erection charges & transportation charges complete in all respect of lt line, erection part of lt line dhanot, erection charges & transportation charges complete in all respect of lt line, erection part of aug. of 63 kva to 100 kva dtr sasan, erection charges & transportation charges complete in all respect of aug. of 11/0.4 kv, 63 to 100 kva dtr, erection part of aug. of 25 kva to 100 kva dtr dhanot, erection charges & transportation charges complete in all respect of aug. of 11/0.4 kv, 63 to 100 kva dtr

State Government

CTN :45427478

11 Jun, 2026 NA

Kangra - Himachal Pradesh

Tender For tender for supply of equipment / material , design, erection, testing & commissioning for sop to improvement of distribution system of various lwss in eletrical section silh under esd hpsebl majheen, ed jawalamukhi. - supply part of aug. 11/0.4 kv 100 to 250 kva distribution sub-station, cable 3.5 x 240 sq. mm, lt distribution panel box for 250 kva dtr, aluminium thimble 240 sq mm, capacitor bank 81 kvar for 250 kva dtr, danger plate, surge arrester, transformer bed (civil work), chain link fencing, angle iron, gate etc. for transformer fencing, chemical earth, aaac 7/4.26 sq. mm, chain pully 3 ton, supply part of ct-pt unit, ct pt combined unit (pt:11 kv/110 v ct: 200/5 a), 3-ph, 4-wire tri vector meter (pt - ratio -/110 v, pvc multistrand 2.5 sq mm copper wire, 1 inch dia gi pipe for concealing, bend joint/elbow, st pole 9 mtr long with base plate, muffs with concerete filling, x-arm: [channel iron (100x50x6 mm), length : 2800 mm x 4 nos], x-arm: [channel iron (75x40x4.8 mm), length : 2800 mm x 4 nos] for supporting do fuse unit & go switch, x-arm [channel iron (100x50x6 mm), length : 460 mm x 2 nos for supporting main channel of transformer, ms angle iron (50x50x6 mm), length : 2800 mm x 1 nos, ms angle iron 50x50x6 mm), length : 950 mm x 2 nos, ms angle iron (50x50x6 mm), length : 2800 mm x 4 nos, ms angle iron (50x50x6 mm), length : 460 mm x 2 nos, go switch handle supporting : [ channel iron (75x40x6 mm), length:460 mm, go ab switch unit (11kv, 400a, 25 ka ) triple pole o/d type, d.o fuse unit, surge arrester, 9 kv station class (porcelain type), discs insulator sets (comprising 1 no. disc: ^^(porcelain, bs, 12 kv, 90 kn) including dead end clamps etc.), stay set complete, stay wire, pipe earthing set, gi wire (6 swg) earth wire, half clamp (m.s. flat 50x6 mm), full clamp ( m.s flat 50x6 mm), nuts and bolts of various sizes (galvanised / coated), aluminium thimble, copper thimble, danger plate, barbed wire, aluminium paint., red oxide, erection part of aug. 11/0.4 kv 100 to 250 kva distribution sub-station, erection charges & transportation charges complete in all respect of aug. 11/0.4 kv 100 to 250 kva distribution sub-station, erection part of ct-pt unit, erection charges & transportation charges complete in all respect of ct-pt unit

Aluminium Paint Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors