Latest aluminium paneling Tenders | Government aluminium paneling Tenders

CTN :45408698

10 Jun, 2026 17.47 Lacs

Kasaragod - Kerala

Tender For construction of 200 bedded gents and 200 bedded ladies hostel including internal water supply, sanitary installations, drainage etc at central university of kerala, periye campus, kasaragod, kerala. sh: providing and fixing aluminium work with glazing for kedar and alakananda hostel.subwork/packages:na

CTN :45408817

09 Jun, 2026 64.57 Lacs

Delhi - Delhi

Tender For construction of guest house cum cafeteria under phase-iii at nipgr, new delhi (sh: sky light work, aluminium glazing work in courtyard and other miscellaneous work)

CTN :45437446

15 Jun, 2026 NA

Shimla - Himachal Pradesh

Tender For supply of gi bend 50mm , gi elbow 15mm , gi elbow 20mm , gi elbow 25mm , gi elbow 50mm , gi elbow reducer 20x25mm , gi elbow reducer 25x40mm , gi elbow reducer 40x50mm , gi elbow reducing 20 x 15mm , gi elbow reducing 25 x 15mm , gi nipple 15mm x 100mm , gi nipple 15mm x 150mm long , gi nipple 20mm x 50mm , gi nipple 15mm x 50mm long , gi nipple 20mm x 100mm long , gi nipple 20mmx150mm long , gi nipple 25 mm x 50 mm long , gi nipple 25mm x 100mm long , gi nipple 25mmx150mm long , gi nipple 40mm x 100 mm long , gi nipple 40mm x 50 mm long , gi nipple 40mmx150mm long , gi nipple 50mm x 100mm long , gi nipple 50mmx150mm long , gi plug 50 mm , gi plug 15 mm , gi plug 20 mm , gi plug 25 mm , gi socket 25mm , gi socket 15mm , gi socket 20mm , gi socket 40mm , gi socket red 40 x 15mm , gi socket reducer 15 x 20mm , gi socket reducer 25x20mm , gi socket reducing 15x20mm , gi socket reducing 25x15mm gi , gi tee eqal 20mm gi , gi tee eqal 25mm gi , gi tee eqal 40mm gi , gi tee equal 15mm gi , gi tee equal 80 mm isi maked , gi tee reducer 25x40mm , gi tee reducer 50x25mm , gi tee reducer 50x40mm , gi tee reducing gi 20x15mm , gi tee reducing gi 25x15mm , gi tee reducing gi 25x20mm , gi union 15mm , gi union 20mm , gi union 25mm , gi union 40mm , gi union 50mm , handle for almirah steel large or medium , helical door closer , helical door spring steel 150mm , hexa blade double edge 12 inch , hinges but steel 100mm , hinges but steel 50mm , hinges but steel 75mm , hinges butt aluminum 75mm , ht tape for 11 kva make scotch , indicating lamp for geyser , mixture for wash hand washbasin wall mixer , modular bell push 6a , modular socket 2 point 5 amp 2 pin , modular socket 6 amp 5 pin , modular socket 6 or 16 amp 6 pin , multisocket 6 amp 5 pin , nails wire 25mm , nails wire 40mm 14swg , nails wire 75mm 12swg , non return valve 100mm , non return valve 50mm , nut and bolt 3 inch long and dia 05mm , nylon newar , oil putty for glazing , one way switch 5a , onload changeover switch 200 amps with steel enclasure tpn , pillar cock pvc 15mm , pink primer for wood , plate rack stainless steel 1050x600x200mm , plate rack stainless steel 1050x600x250mm , ply wood teak face 8 x 4 x 6mm , ply wood commercial 6 x 3 x 12mm , ply wood commercial 8 x 4 x 3mm , ply wood commercial 8 x 4 x 6mm , plywood 1 side t or f 8x4x4mm , plywood commercial 8x4x4mm , plywood commercial bwr 8x4x12mm , plywood commercial bwr grade 8x4x18 mm thick , plywwood teak face 6x3x9 mm , polythene connection 450 x 15mm with nut and washer , polythene connection 600 x 15 mm with nut and washer , polythene connection 900 x 15 mm with nut and washer , pre laminated board 2440 x 1220 x 18mm or 19mm , premix readymade mixture for road brush paint flat 150mm, brushes paint flat 125mm, brushes paint flat 25mm, brushes paint flat 75mm, cable flexible copper conductor 1 point 5 sqmm single core , cable pvc copper conductor 2 point 50 sqmm 3 core, cement in plastic bag 50kg each, changeover switch 400 amp 4pole, changeover switch 63 amps 4 pole, clamp for pvc pipe 100mm, cloth green baize , cloth malmal, corner shelf 5 inch, coupling cp brass 32mm for sink, cp connection 600 x 15mm with brass coupling and nut and washer, door seal strip aluminium 1 mtr wide, dwc hdpe pipe 100mm, dwc hdpe pipe 40mm, dwc hdpe pipe 50mm, dwc hdpe pipe 80mm, elbow 3 way 32mm gi, extension nipple cp brass 15 mm, fan electronic regulator step or capacitor type 100 watt two module, fan regulator modular type 100 w for //bid details 2 / 112

State Government

CTN :45415906

10 Jun, 2026 NA

Birbhum - West Bengal

Tender For local market rate for construction items materials of labpur dev. block jurisdiction of fy-2026-27 (including all taxes). - laying and jointing pvc pipe. heading, welding by electric plant, hire charges for 5 hp with operator,fuel and shifting etc all charges complete, hire charges of shuttering plank (25mm-30mm thick) with prop including all fittings, hire charges of shuttering plank (25mm-30mm thick) without prop including all fittings, hire charges of shuttering plank (above 30mm-37mm thick) with prop including all fittings, hire charges of 5 kva generator, hire charges of 3 kva generator, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, vibrator (needle type 40 mm), surface vibrator, water tanker 5000 ltr. capacity, 1st class picked jhama bricks(traditional), 1st class traditional bricks (kiln burnt), modular fly ash bricks, fly ash bricks(traditional), coloured inter locking c.c. paver block, moorum, fine sand, medium sand, coarse sand, coarse sand, portland cement, white cement, water proofing materials, brick aggregate (single size):50 mm nominal size, brick aggregate (single size):40 mm nominal size, stone aggregate(single size):63 mm nominal size, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 06 mm nominal size, stone screening type a (13.2 mm), stone screening type b (11.2mm), stone boulder( 225 mm above ), stone boulder ( 225mm-150mm ), grade 1 stone metal 63 mm to 45 mm, polythene sheet (150 gm per sqm), thermocol 12.5 mm thick., udaypur marble slab ( for floor, lobby etc) 18 mm thick of size 0.3 sq m to 0.6 sq m, chawk dungri marble slab ( for floor, lobby etc) 18 mm thick of size 0.3 sq m to 0.6 sq m, udaypur marble slab ( for wall/dado) 18 mm thick of size 0.3 sq m to 0.6 sq m, chawk dungri marble slab ( for wall/dado) 18 mm thick of size 0.3 sq m to 0.6 sq m, 18 mm thick marble partition slab for urinals including fitting fixing (with chawk doongri marble), ceramic glazed tiles ist quality 300 x 300 mm in all shades and designs of white, ivory, grey, fume red brown etc., rectified - ceramic glazed tiles ist quality 300 x 300 mm or more in all shades designs white, ivory, grey, fume red brown etc, vitrified floor tile 60x60 cm, precast chequered cement tiles 22 mm thick dark shade using ordinary cement, bitumen vg-30, bitumen emulsion, coal tar, diesel oil, sal silliguri -in/c labour cost, sal malaysia-in/c labour cost, neem wood -in/c labour cost, other local wood -in/c labour cost, ordinary teak wood -in/c labour cost, sisu/gamar wood -in/c labour cost, local sal wood -in/c labour cost, bamboo (8cm-10cm dia) including fixing, eucalyptus bullah (7.5cm -10cm dia), eucalyptus bullah (12.5cm -15cm dia), eucalyptus bullah (17.5cm -20cm dia), sal bullah (7.5cm -10cm dia), sal bullah (12.5cm -15cm dia), sal bullah (17.5cm -20cm dia), malayasia sal cleat, wood dust, frp composite door frame 66mm x 70mm, frp composite door frame 66mm x 90mm, supplying solid flush type doors of commercial quality, 30 mm thick factory made glass fiber reinforced plastic panel door shutter i/c carriage, supplying,fitting & fixing of 2-track / 3-track aluminium sliding window, supplying, fitting & fixing of partly glazed partly paneled or fully glazed single leaf aluminium swing door, supplying, fitting & fixing of aluminium fixed partition wall of all aluminium sections, anodised aluminium hanging type door stopper, brass 150 mm floor door stopper (0.357 kg), chromium plated brass mortice latch and lock 100x65 mm with 6 levers and a pair of brass lever handles, ms integrated grill for steel window and ventillator, two point nose steel handle, openable steel windows as per is sizes with side hung shutters and horizotal glazing bars., top hung side hung ventillator, fixed type ventilators as per i.s. sizes with horizontal glazing bars h

CTN :45419965

11 Jun, 2026 34.85 Lacs

Puducherry - Tamil Nadu

Tender For construction of 400 bedded boys hostel building at jipmer campus, puducherry. (civil work): building portion including internal water supply lines, sanitary intallation, drainage, demolition of existing quarters & other development works. (electrical and mechanical installation): package c1: providing internal e1, c2: providing fire alarm system, c3: providing firefighting system, c4: providing cctv, c5: providing 3 nos 13 passenger lift, c6: providing 5000 lpd solar water heater, c7: providing networking, (agreement no.32/ee(puducherry)/cpwd/2023-24) sub head: risk & cost under clause 14 for structural glazing aluminium composite panel work, providing and supplying aluminium extruded tubular and other aluminium sections and designing, fabricating, testing, protection, installing and fixing in position structural galzing work and extra for openable / top hung vision glass panels and providing and supplying spandrel glass panels work.subwork/packages:risk & cost under clause 14 for structural galzing aluminium composite panel work, providing and supplying aluminium extruded tubular and other aluminium sections and designing, fabricating, testing, protection, installing and fixing in position structural glazing work and extra for openable / top hung vision glass panels and providing and supplying spandral glass panels work.

State Government

CTN :45382897

08 Jun, 2026 13.48 Lacs

Faridabad - Haryana

Tender For dnit name : repairing of plaster work and providing and laying vitrified floor tiles, water proofing, floor mounted, pcc, flush door shutters, paint work, sanitary work in house no.1413, 1414, 1415 and 146 in sector-15 faridabad and all other works contingent thereto. chargeable head - annual maintenance of hsvp staff quarters in sector-15 and 15a, faridabad for the year 2026-27. - [10.1]providing and laying of base course of floors consisting of 100 mm thick cement 1:8:16 and 100 mm sand or stone filling., [10.109]providing and laying gang saw cut 30 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of engineer-in-charge., [10.67.1]providing and laying vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to i.s. 15622, of approved make, in all colours and shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement and matching pigments etc. complete. 1. size of tile 500x500 mm, [11.5.3]12 mm cement plaster of mix : 3. 1:4 (1 cement: 4 fine sand), [11.6.2]15 mm cement plaster on the rough side of single or half brick wall of mix : 2. 1:6 (1 cement: 6 fine sand), [11.64.1]distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : 1. new work (two or more coats) over and including water thinnable priming coat with cement primer, [11.96.1]finishing walls with premium acrylic smooth exterior paint with silicone additives of required shade: 1. new work (two or more coats applied @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm), [12.157.1.2]providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate z sections and other sections of approved make conforming to is: 733 and is: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required epdm rubber/ neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / panelling, c.p. brass / stainless steel screws, all complete as per architectural drawings and the directions of engineer-in-charge. (glazing, panelling and dash fasteners to be paid for separately) : 1.2. for fixed portion powder coated aluminium (minimum thickness of powder coating 50 micron), [12.159.2]providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with epdm rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (cost of aluminium snap beading shall be paid in basic item): 2. with float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm), [13.29.1]steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 1. in stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete, [13.44]providing and fixing circular/ hexagonal cast iron or m.s. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick m.s. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ m.s. sheet box by means of

State Government

CTN :45363451

06 Jun, 2026 1.38 Lacs

Jummu - Jammu And Kashmir

Tender For providing and fitting of al cable along with accessories and realignment of diesel generator set wiring and allied works in the divisional office. - providing & fitting of al cable in the division office. the job involves providing/fitting of angle board on the wall, with the help of hammer and chisels. providing and fitting of automatic change over switch one, switch disconnector 01 no s. al cable capacity 3.5 core 50 mm sq 20 mtrs in length from dg set to change over switch. along with pvc pipe clumps. providing and fitting of 16 mm sq. multistrand copper wire 10 mtr. in length from main switch to automatic change over to fuse box. checking of connections, repairs/replacement to wiring wherever damaged. providing and fitting of three tube lights, switch, fans two nos, extension wire for wifi sets. testing on load complete job. the job further also includes repair/replacement of damaged wooden doors 03 no s size (81 43 ) & 01 no s size (74 43 ) , frames, shutters, panels, replacement of unserviceable wooden members, fixing of hinges, handles, tower bolts, locks, glass panes, and all allied fittings. the work also includes surface preparation, polishing/painting, and finishing to ensure proper functionality and durability., the work includes repair and installation of 01 no s aluminium paneling size (36 24 ), including fixing of aluminium sheets/panels, frames, fasteners, and all allied accessories as required. the scope also covers repair/replacement of wooden paneling size (84 84 ), including fixing of wooden boards, framing members, polishing/finishing, and all associated carpentry works. the job includes cost of material & labour charges complete job.

CTN :45125955

03 Jun, 2026 NA

Kannauj - Uttar Pradesh

Tender For bid to ras providing of facility management services - lumpsum based - educational institute; fixing glass panels with rubber beading and cleaning all classroom glass surfaces to ensure proper fitting and a clear finish; consumables to be provided by service provider (inclu..,facility management services - lumpsum based - educational institute; repairing and refixing aluminium sections to ensure proper alignment, strength, and durability of the glazing system; consumables to be provided by service provider (inclusive in c..,facility management services - lumpsum based - educational institute; fabrication, installation, and proper fixing of components with required scaffolding for safe and accurate execution; consumables to be provided by service provider (inclusive in c..

CTN :45367742

19 Jun, 2026 NA

Jamnagar - Gujarat

Tender For supply of fancy tap with l bend , cp waste coupling for steel kitchen sink 100x32mm , ewc china glazed p trap , gi elbow 15mm , gi elbow 20mm , gi nipple 15x100 mm long , gi nipple 20x100 mm long , gi nipple 20x150 mm long , gi nipple 20x75 mm long , gi plug 15mm , gi plug 20mm , gi claimps 20mm dia tubing , gi elbow reducing 20x15mm , gi elbow reducing 25x20mm , gi socket 15 mm , cp grating 150 mm dia , pvc flushing cistern l l 10 ltr cap , gi socket reducing 25x 15 mm , gi socket 20 mm , gi tubing 15 mm medium grade , gi tee equal 15 mm , gi tees equal 20 mm , gi wiremesh roll 15mtr roll of 30 kgs , gi tubing 20 mm medium grade , glass sheet 3 mm thick ordinary quality in sqaure n ecx 0 point 50 sqm each pane , glass sheet plane 4 ft x 4 ft x 5 mm thick , glass shelf 600 x 120mm x 6mm thick with chromium guard , hacksaw blade both side teak heavy duty , helical door spring 250mm , glass sheet pin headed 4 ft x 4 ft x 5 mm thick , hydrolic door closer left , hydrolic door closer right , looking mirror 18 inch x 24 inch with pvc frame , looking mirror 5 feet height for office , nails 1inch , nails 1 point 5 inches , nails 4 inches , oil putty , paint blue , paint synthetic enamal in white colour , pillar tap for whb swan neck , plywood bwr grade of size 8 ft x4 ft x6mm , putty glazing , pvc ball cock float valve 15mm complete , pvc ball cock float valve 20mm complete , steel ms hinges butt 75 mm , looking mirror 600x450 pvc frame , pvc pillar tap 15mm fancy , pvc ball cock float valve 25mm complete , pvc bib cock 15 mm , pvc bib cock long body 15 mm , pvc bib cock short body 15 mm , pvc connection 15x450mm long complete with nut bolt and washer , pvc grating round or square 100 x 150mm , pvc grating 100mm , pvc grating 140 mm , pvc grating 75mm , pvc connection 15x600mm long complete with nut bolt and washer , pvc shower rose 15 x 100mm , pvc urinal waste pipe with coupler screw type , pvc waste pipe corrugated 32 x 900 mm long , pvc stop cock 15mm , pvc stop cock 15mm external thread , pvc towel rail 24 inches 600mm , pvc waste pipe 32 mm flexible type heavy grade 600 mm length , pvc waste pipe flexible 40mm x 600 mm , rat rail brass rod pattern spring 300 mm including roller and roller plate , stainless steel kitchen sink 675 x 535mm , water storage tank 500 ltr , stainless steel kitchen sink with drainboard overall size 915mm x 460mm and bowl size 410mm x 330mm x 160mm complete , stainless steel plate rack size 1220x x915x610mm , stainless steel plate rack size 900x750x250mm , steel ms hinges butt 100 mm , cp brass soap dish , taflon tape , turpentine oil , water storage tank 1000 ltr , bib tap for sink swan neck , wash basin 550 x 400 mm , seat cover for wc with rubber base , corner glass shelf 9 inch x 12 inch size , aluminium door stopper 100mm double rubber type , double layer cyl verticle tank 1000 ltr white colour , double layer cyl verticle tank 700 ltr white colour , hydraulic door closer , mortise door lock , pvc grating with waste hole basin mixer 150mm , pvc lid for tank 1000 ltrs with hinges and screw , pvc pipe 15 mm 10 mtr long , pvc pipe 20 mm 10 mtr long , pvc pipe 25 mm 10 mtr long , ss sink coupling no 3 , ss sink coupling no 4 , tank cover for tank 500 or 1000 ltrs , gi nipple 20 mm tank checknut , gi tank nipple 25 mm checknut , gi tank nipple 15 mm checknut , ms tower bolt 150 mm , white cement i kg bag , aluminium curtain rod 25 mm 12 feet long , cp bib cock 2 way 15 mm , ball valve high pressure ptmt pvc withapoxy coated aluminium rod 32 mm , bib cock brass 15 mm , cp waste coupling 32 mm brass cp , ball valve high pressure ptmt pvc withapoxy coated //bid details 2 / 116 aluminium rod 20 mm , ball valve high pressure ptmt pvc withapoxy coated aluminium rod 15 mm , white cement 5 kg bag , pvc elbow 15 mm , pvc elbow 20 mm , pvc elbow 25 mm , leather tool bag , nails wire of various size , fevicol 5 kg pack size , tumbler holder glass

corporations/Associations/Others

CTN :45355298

03 Jun, 2026 27.68 Lacs

Mayiladutjurai - Tamil Nadu

Tender For providing structural glazing (refer detail name of work for tender notice) for the work of construction of new district police office building with development works at mayiladuthurai in mayiladuthurai district - fabricating the structural glazing grid electro coloured anodizing using size (2 x1 2.5 to 3 kg), in-pw-tug-gp) fabricating supply and fixing of toughened glass partition grid using (2 x 1 ) aluminium section, in-ele-acp) providing and fixing of aluminium composite panel (acp) having 50x25x1.20mm tk fabricated fixed at all level elevation and heights, in-ele-alu ch) supplying and fixing of aluminum outer frame having 50x25mm 1.2mm tk, aluminum channel of size 50x25 mm plain, 1.2mm thickness, fabricated fixed at all level elevation height extrude section cutting and fixing required space, fw-ss-ahs-2leg) providing two legged scaffolding using 15cm diameter casurina props or best quality bamboo posts of 4m overall length fw-ss-ahs-5.5m b).5.50 m height in addition of 2.5m ht (portico), fw-ss-ahs-10.5m d) 10.50 m height in addition of 2.5m ht (front elevation), in-ele-cir.pill-bw) providing 0.60 mtr dia circular pillar at a height of 6.45 mtr by using country bricks with cement mortor

Aluminium Paneling Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

corporations/Associations/Others