Latest aluminium partition Tenders | Government aluminium partition Tenders

Central Government/Public Sector

CTN :43297542

29 Dec, 2025 4.27 Lacs

Bangalore - Karnataka

Tender For repair and replacement of skylight glass at mhu,mdc and aluminium partition and wooden flooring works at various locations at campus.

corporations/Associations/Others

CTN :43296672

24 Dec, 2025 5.00 Lacs

Harur - Tamil Nadu

Tender For maintenance and fixing of aluminium partition wall , air conditioner in harur municipal office in harur municipality

State Government

CTN :43301194

26 Dec, 2025 NA

Pondicherry - Pondicherry

Tender For work of providing and fixing of aluminium partition for rio3 panel inside the power house building of ppcl campus t.r pattinam, karaikal, has been postponed as under.

CTN :43306765

01 Jan, 2026 79.0 Thousand

Leh - Jammu And Kashmir

Tender For supply of pen stand , revolving chair with head rest , name plates , aluminium partition with glass , hdmi cable 5 mtr , sandisk usb , 10 ft x 1ft 5 inch flex

corporations/Associations/Others

CTN :43294324

13 Jan, 2026 2.96 Lacs

Kolkata - West Bengal

Tender For installation of aluminium partition at portion of room no 253, second floor, mllac department for installation of a.c. facilities

Co-operative

CTN :43265185

05 Jan, 2026 NA

Godhra - Gujarat

Tender For curd & paneer section expansion, modification project & additional work at panchamrut dairy, godhra on turnkey basis. - shifting of existing curd cup packing machine (capacity: 2400 cph and 3600 cph), curd matka/ tub packing machine (capacity: 120 matka/hr), semi automatic bottle packing machine pack size: 1 liter and 500 ml (capacity: 120 bpm), balance tank (200 l) with cip return pump for packing machine cip (capacity: suitable), new curd packing room with puf & aluminium partition , air curtain, al sliding door etc (capacity: as per layout), curd incubation room (capacity: as per layout), blast room for curd (capacity: as per layout), cold store for curd/paneer (capacity: 120 matka/hr), existing curd incubation room- expansion/ modification (gf) (capacity: as per layout), dismental ,shifting and re locate of existing jaw cooling system with tank,pump,chiller & pipe in pipe chiller (capacity: suitable), phe for curd milk cooling (42 to 4 degree) (capacity: 5 kl ph), curd milk transfer pump with vfd to heater (capacity: 5 kl ph), cip return pump for curd milk storage tank (capacity: 10 kl ph), curd milk heater ( 4 to 45 degree c) with all standard accessories. (capacity: 2 kl ph), steam water mixing battery with 10 mtr hose (washing points) (capacity: suitable), off line weigh scale (capacity: 120 matka/hr), paneer packing room expansion /modification with ahu system (capacity: 3 kg), paneer cube and block (100 and 200 g ) cutting machine (capacity: suitable), off line hardening block (capacity: 50kg/hr), paneer heater modification ( 4 to 80 deg.c) (capacity: suitable), paneer block cooling tank with pneumatic rack in/out system & uv treatment system with chiller and circulation pump (capacity: 2 kl), product, cip and utility pipes, valves, fittings and supports with insulation (capacity: suitable), mcc panel ,electrical and other utility (capacity: suitable), modification in existing blast room at ground floor (capacity: suitable), intruments (capacity: suitable), curd milk storage tank (capacity: 5 kl), milk storage tank for products with transfer pump (capacity: 10 kl and 10 klph pump), additon of cip circuit in existing cip kitchen (capacity: suitable), pet area incubation room one side and top insulation false ceiling with auto cut off heater including electrical connection from existing panel (capacity: suitable), installtion erection and commissioning work including lifting and shifting (capacity: suitable)

Central Government/Public Sector

CTN :43272646

08 Jan, 2026 NA

Jodhpur - Rajasthan

Tender For aluminium partitioning work in various departments at iit jodhpur

Central Government/Public Sector

CTN :42887331

27 Dec, 2025 NA

Roorkee - Uttarakhand

Tender For corrigendum : certain repair to b/r and e/m items in zone c under ge roorkee - demolition of brickwork or stone boulder masonary built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed., m&l for brick work, with class b brick straight or curved on plan to any radius built in cement mortar (1:6) as in raising of manholes and septic tanks complete all as specified and directed, taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed, m&l for rendering 15 mm thick on fair faces of brick surfaces or concrete surfaces and finished surfaces even & smooth in cm 1:4 complete including mixing water proofing compound complete all as specified and directed, supply only water proofing compound complete all as specified and directed., m&l for rendering 15 mm thick on other than fair faces of brick surfaces or concrete surfaces and finished surfaces even & smooth in cm 1:6 complete all as specified and directed, m&l for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed, m&l for preparing newly plastered surface of wall and applying two coats of oil bound distemper complete all as specified and directed, m&l for complete removal of existing treatment from walls (any number of layers) by scrapping with steel scrappers or any other means, including filling depressions of scrapped surfaces and applying two coats of oil bound distemper, over and including a coat of 1 mm thick wall care putty with preparation of plastered surfaces complete all as specified and directed., m&l for preparation of old decorated wall surfaces by complete removal of existing treatment on walls including cornices by broming down with steel brush, scrapping down smoke soot, moulds moss and efflorescent salts and trading oil and grease spots and applying two coat of cement base paint inluding one mm thick cement base putty complete all as specified and directed., m&l for preparation of old decorated wall surfaces by complete removal of existing treatment on walls including cornices by broming down with steel brush, scrapping down smoke soot, moulds moss and efflorescent salts and trading oil and grease spots and applying two coats of 100% premium acrylic emulsion paint having voc less than 50 gm/litre and uv resistance as per is 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces inluding one mm thick cement base putty all as specified and as directed. (note: painting of overhead tank min height 18 to 25 meter), m&l in repair for built in steel cup board with pressed steel frame of size 75 mmx45mmx1.25 mm thick with pressed steel shutter 1mm thick godrej pattern fixed to masonry wall by hold fast made out of 25x3 mm flat iron including ms hanging rod of 10 mm dia with bracket fixed on inner side of one leaf of shutter and on other leaf provision of ms peg set of 3 pegs including spray including locking arrangement spray painting with two coats of synthetic enamel paint over one coat of red oxide primer with two coats of synthetic enamel paint over one coat of red oxide primer all around on steel surface of frame & shutter and making good disturbed portion in cm (1:3) or pcc (1:2:4) type b-0 complete all as specified and directed., s&f in repair 110 mm dia pvc (swr) bends any radius with oval access door complete all as specified and directed, s&f in repair 75 mm dia pvc (swr) bends with access door any radius complete all as specified and directed, s&f in repair 75 mm dia pvc (swr) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or fixed to w

CTN :43252280

29 Dec, 2025 208

Honnali - Karnataka

Tender For purchaging of drinking water meterials comes under the lingapura grama panchayath honnali taluk davnagere dist - ring spanner12x13, ring spanner18x19, duoble spanner18x19, ring spanner20x22, pipe w.rench 24, pipe w.rench 14, pipe w.rench 12, dol starter (13-21a), h d p pipe3mangalam, g i nippal3h d p, out door typepanel board, p nippl s s2h d, nipplss212hdp, fuse63 amps, pn6 pe100 hdpe pipe2 mangle, relay unit l&t, agri sl valve50 mm, nipple20x9, union32mm, g i coller25 mm (1, g i bend15 mm, g i nipple 3650 mm, g i coller25x20 1x3/4, g i coller20x15 1/2, g i elbow20x15 mm, meet ball valve p 65 mm, j k solvent 500 ml, pvc elbow finolex 63 mm 6kg, ball vale pvc p 63 mm, pvc pipe 6kg finolex 40 mm, p v c pipe finolex 63 mm 4kg, jk solution 100 ml, reapere coller finolex 63mm, axelblade, airvalve, aluminium coil 1000 feet 10 mm, borecap 2 10, shallacv, pvc elbow (thread)75x63 mm, g i bend isi 50 mm, mm g i nipple 50x12, gi coller heavy 50 mm, ashirvad ci top & bottom adopter 50mm, ashirvad column pipe50mm, g i nipple h 50x6, trangel boll valve 50 mm, moterunnati 7.5 h p 12 stg, aluminium coil 300ft 10 mm, clamp double nut bolts 2heavy, panelbox big, finolex sub cable 4.0 sq mm, pvc service shaddal finolex 63x25 mm, spanner 22 mm, pvc tee finolx 75 mm 6kg, novolt coil, pvc elbow finolex 75 mm 6kg, sj relay 20-32 a, pvc pipe finolex 75mm 4kg, pvc end cap 63 mm 6kg, f t a pvc 63 mm, pvc elbow75mm6kg, l& t starter, reapere coller110 mm, reapere coller90 mm, fta pvc 90mm, pvc coller90mm, pvc coller 75mm, g ielbow2 isi, sp2preventer, motor panelboard, m t a pvc 63 mm, fuse100amps, flanz 110 mm, sp3 preventer, autostarter, tatapipe50mmgig, finolex sub cable 2.5 sq mm, bolt nut 12 mm, standassembly, g i b nipple 20x24, g i b nippe h 20x12, taper cock 20 mm, pvcshadlefinolex75x25mmb, mm f t a15, mm f t a25, ashirvad column pipe32 mm, mm g i nippl50x12, g i bend50mm, g i coller20mm, g i elbow20 mm, ginipple620mm, gi nipple 1220 mm, g i nipple 1820 mm, g i nippl 20 mm 24, pvc ball valve25mm, pvc ball valve20 mm, pvc ball valve75mm, pvc coller 25 mm8kg, pvc coupler90mm4kg, g i coller50 mm, mm pvc r f t a75x63, s l valve 65 mm, pvc m t a 90mm 6kg, pvcthread elbow 90x75 mm, pvcball valve plane110 mm, pvc ball valve plane110 mm, pvc tee90 mm 6kg, pvc elbow90 mm 6kg, pvc fta63 mm, pvc rmta75x63 mm, pvc rmta90x75 mm, pvc rmta90x 63 mm, repair saddle90mm, repair saddle110 mm, repair saddle63x15 mm, meteringpanel, flanz65 mm (slv), flanz50 mm (slv), end cap20 mm, mm r c75x63, mta15mm, g i nipple 3015 mm, g i nipple 2415 mm, g i nipple 3615 mm, gi nipple 4820 mm, g i nipple 3620 mm, gi nipple 615 mm, g i nipple6 50mm, g i elbow50 mm, pvc pipe15 mm 12, pvcpipe25mm3 4, g i nipp1850 mm, pvc ball valve90 mm, panl bord3 h p, panl bord2h p, moter2h p 25 stg, moter2 h p 20 stg, moter3 h p 25 stg, moter3 h p 20 stg, mug moter panlset, opn well moter sub 12.5 h p, moter6 h p 12 stg, moter8 h p 12 stg, moter5 h p 8 stg, moter6 h p 8 stg, mm 305 mtr 1100 v cable10 s q, axelframe, pn6 pe 100 hdpe pipe2 1/2mangalam, c r i n r v 3, v-guard moter 0.5 hp, pvc pipe90 mm 6kg, nut bolt3/8x11/2, wrench18pipe, pipe w.rench18, ring spanner24x26, duoble spanner24x26, duoble spanner14x15, double spanner12x13, standassembly non-telescopic, m12 x 50 mm long hex coupler, m10 x 40 bolts with nylock nut, m12 x 40 bolts with 2 nuts, ball bearing 6204z, handleaxle, chain withcoupling, connecting rods10 ft. (3 mtrs)., handle barwelded component, watertank assembly, thirdplate, head assembly (+ cover & axle), moter2hp 25 stg, moter2 hp 20 stg, moter3 hp 25 stg, moter3 hp 20 stg, moter pump14 stg, moter pump12 stg, moter pump10 stg, moter pump8 stg, mugmoter panlset, opnwell motersub15 h p, opn wellmotersub 12.5 h p, opn wellmotersub 10 h p, open well moter sub 7.5 h p, brass ball vale 1/2, ginipple 16x12, hdpe service saddle 63 x 20, hdpe elect fusion fta b 20mm, hdpe elect fusion coupler 90mm, hdpe elect fusion tee 90 mm, hdpe ef reducer 90 x 75mm, hdpe ef reducer 7

CTN :43241632

29 Dec, 2025 NA

Kanpur - Uttar Pradesh

Tender For supply of pvc paneling , aluminium partition 19 point 5 ft x7 point 5 ft , aluminium door , glass film , door closer

Aluminium Partition Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

corporations/Associations/Others

State Government

corporations/Associations/Others

Co-operative

Central Government/Public Sector

Central Government/Public Sector