Latest aluminium paste Tenders | Government aluminium paste Tenders

CTN :45444811

22 Jun, 2026 NA

Mumbai - Maharashtra

Tender For supply of aluminum stair nozing - item, purchase of aluminum stair nozing, freight, insurance, uploading charges etc., camera bracket , 8tb hdd (surveillance hard disk drive) 30 days backup , rg 45 connetor & dc pin , switch 16-port 1ghz mbps, i/o box , cat 6 cable conduit pipe with labour charges and electric work , hdmi cable 10 meter. , 6u wall mount rack enclosure , cabinet, camera power supply 10 amp , 12 volt 32 display monitor (full hdmi, 3 years extended comprehensive warranty ( to quote basic rate for per year), rate for amc as per per year (3 years on-site comprehensive warranty ) , rate for amc as per per year (3 years on-site comprehensive warranty ) , rate for amc as per per year (3 years on-site comprehensive warranty ) , rate for amc as per per year (3 years on-site comprehensive warranty ) , rate for amc as per per year (3 years on-site comprehensive warranty )

CTN :45458799

29 Jun, 2026 NA

Cuttack - Odisha

Tender For tender document for supply of office/hospital furniture executive chair , table , wooden chair , revolving stool (high desk to see microscope) , executive table with draw system (48 " 42") , executive chair without head rest , plastic chair for patient with arm , foot steps (prestige) , 500mm (l) x 300mm (w) x 230mm (h) anti slip aluminum trade plate , wooden height chair , wooden chair with cushion without arm and with back rest. width 18" height 36" , adjustable steel rack 3 self , steal rack height 36" length 36" width 10" , medicine storage box , plastic container & partition box (4/6 partition) , plastic rack for file , plastic cupboard 4 self , (4' x 2') , - , computer table , height 30" x length 36" x width 24" with key board, depu & ups stand, draw , eye department , waiting chair 3-seater , high back chair , high back with breathable mesh. , auto-adjustable , 3d adjustable soft pu padded armrests , visitor chair , mid-back visitor chair with contoured lumbar support. , powder-coated mild steel frame for stability. , 1.2 0.1 cm thick hot-pressed plywood with moulded polyurethane (pu) foam. , approximately 47.5 cm (w) x 58 cm (h) (back), 47 cm (w) x 48 cm (d) (seat). , fixed loop arms , almirah storwel plain , (1981 h x 916 w x 486 d) , drawer filling cabinet , (1320 h x 470 w x 620 d) , pedestal dustbin

CTN :45424341

23 Jun, 2026 NA

Jammu - Jammu And Kashmir

Tender For supply of prefabricated living shelter 06 men , prefabricated living shelter 10 men , living shelter 20 men , ceiling fan 1400 mm , ceiling fan 1200 mm , 1100 v grade pvc insulated copper stranded conductor two core , led panel ceiling light , house service bracket , led tube light fittings 20w , led tube light fittings 40 w , switch socket combination 5 amp 5 pin , switch socket combination 6 amp 5 pin , switch socket combination 15 amp 5 pin , switch socket combination 20 amp 10 pin , piano type switch 6 amp , piano type switch 5 amp , rectangular pvc switch board , led flood light 18 w , fan regulator block for mounting switches , mcb db made of steel sheet , fr insulation tape , mcb 6 amp sp , mcb 10 amp sp , mcb 25 amp spn , pvc ceiling rose 6 amp , pvc casing capping 25 mm , pvc casing capping 32 mm , angle holder with 14w led bulb , pvc round block , pvc rectanular box 250x200x50mm , pvc rectangular box 175x100x50mm , black screws 4mmx19mm , black screws 6mm x 40 mm , 20 watt bulk head fitting , 10 w led flood light , 20 mm pvc conduits with bend , mcb 16 amp with spn , mcb 63aamp with spn , mcb sp 6-32a amp with spn , pvc insulated cable copper conductor 1 point 5 sqmm , pvc insulated cable copper conductor 2 point 5 sqmm , 1100 v grade frpvc insulated of size 1 point 5mm , 1100 v grade frpvc insulated of size 2 point 5mm , flexible pipe 1 inch , angle holder with lamp shed 9w led bulb , main switch 32 amp 240v spn , change over switch 32 amp , pvc square box , pvc innersheathed unarmed cable 10 sqmm two core , hange over switch 63 amp dp , main switch 63 amp with spn , 1100 v grade 3 core frpvc , earthing material , lightening arrestor system , cp cloth hook with six hooks , ms hook for ceiling fan , 25 mm dia drapery rod 1 point 20m , 25 mm dia drapery rod 1 point 05m , fire extinguisher foam 1 kg cap , vitrified coloured floor tiles , looking mirror , ms single bed , ms single bunk bed , ms double bunk bed , steel locker , ms cabinet , wooden table , plastic chair , chromium plated peg set , aluminum peg stay of four hooks , mild steel chromium plated 25 mm dia , 6mm screw 100 mm long , white cement , ms binding wire , turpentine oil , red oxide , weather proof exterior base paint , synthetic enamel paint , brush 4 inch , brush 2 inch , wall putty , cement primer , integral water proofing compound , stainer 200 ml , vitrified double charged floor tiles , anti-skid coloured floor tiles , leak proof compound , non asbestos fibre cement designer board false ceiling , main vertical ms angle of size 60x60x6mm , horizontal ms angle of size 60x60x6mm , galvanised iron wire dia 3 mm length , erection tools , mild steel semi-automatic portable concrete vibrator

CTN :45296158

04 Jun, 2026 NA

Tawang - Arunachal Pradesh

Tender For bid to ras supply of aluminum partition: : - partiton 498 sq feet , medicine rack , file cabinet , computer table , aluminum rack

CTN :45346460

04 Jun, 2026 NA

Vellore - Tamil Nadu

Tender For supply of eee lab items dept use - three phase transformer rating: 3 kva input voltage: 415 v ac, 3-phase output voltage: 230 v ac, 3-phase frequency: 50 hz winding material: copper wound insulation class: class b or higher duty: continuous duty suitable for laboratory usebench/floor mounted suitable for laboratory operation all winding terminals shall be brought out to insulated terminals and enclosed within a protective outer cover for safe laboratory operation , dc stepper motor driver kit with stepper motorinput supply : 230 v ac, 50 hz stepper motor : permanent magnet / hybrid type with suitable driver circuits. motor operating voltage : 12 24 v dc variable speed control forward and reverse direction control full step and half step operation manual / automatic pulse generation facility built-in regulated dc power supply led indication for phase sequence and status test points provided for waveform observation start / stop control switches to be provided overload and short circuit protection to be provided mounted on compact powder coated cabinet with printed circuit diagram proper insulated terminals and interconnecting leads to be provided patch chords for interconnection. , dc servo motor driver kit with servo motorinput voltage 12 - 24v, dc, 5a, 10-60rpminput supply : 230 v ac, 50 hz servo motor type : dc servo motor with feedback arrangement motor operating voltage : 12 24 v dc controller type : microcontroller based servo drive controller speed control : variable speed control to be provided position control : angular position control facility to be provided direction control : forward and reverse operation feedback device : encoder / potentiometer based feedback system built-in regulated dc power supply led indications for power and status test points to be provided for signal observation and analysis start / stop control switches provided overload and short circuit protection to be provided mounted on powder coated cabinet with printed circuit diagram proper insulated terminals and interconnecting leads to be provided , three phase resistive loadrating: 5.25 kw supply: 415 v ac, 3-phase, 50 hz total number of load steps: 6 main switch to be provided approximate dimensions: 18 18 22 inches (l b h) comprising special cement-insulated electrical load resistors mounted on powder-coated ms panel/enclosure individual on/off rotary switches for load selection mounted on rubber wheels/casters for portability suitable for laboratory load testing applications proper insulation, ventilation, and earthing arrangement to be provided , single phase induction motor with load arrangement 5hp ,230v, 1400 rpmsingle phase, 2hp,230v,1440 rpm with dol starter loading arrangement and electrical workbench mechanical rope with aluminum brake drum loading with adjustable wheels - 2 no s 0-50 kg spring balance - 2 no s electrical panel board with workbench -cupboard with door. panel board- with proper internal wiring& terminals insulated necessary symbols of motor and starter, fuse, supply indicators to be provided and printed on panel board -digital rpm indicator with proximity sensor to be provided -required number of digital ammeter , three phase synchronous motor with electrical workbench 3-phase synchronous motor with electrical workbench and loading arrangement , rating: 5 hp voltage: 440 v ac, 50 hz speed: 1500 rpm (synchronous speed), induction start using damper winding, suitable starter panel, dc supply (0 220 v dc adjustable (variable dc control) within the panel),and necessary workbench electrical panel board with workbench -cupboard with door. panel board- with proper internal wiring& terminals insulated necessary symbols of motor , starter, exciter, fuse, supply indicators to be provided and printed on panel board -digital rpm indicator with proximity sensor to be provided -required number of digital ammeters and voltmeters for motor to be provided on panel board. , synchronizing panelthree phase, 415v, 15a synchronizi

corporations/Associations/Others

CTN :45350807

30 May, 2026 NA

Bengaluru - Karnataka

Tender For auction sale of lcu-copper,ms scrap,dg battery with electrolytes,aluminum cable,copper cable insulated,tx rack,solar panel,shelter panel,battery cabinet outdoor,dg cat-4

Central Government/Public Sector

CTN :45335205

29 May, 2026 NA

Solapur - Maharashtra

Tender For supply of aluminium paint brushing, bright finishing for general purpose to is 2339 : 2013 (re-affirmed %u2013 2018), read with all amendments and rdso amendment no. 1a rev. 1.0 as an additional requirement. packing in 4 ltrs. dual container. (aluminium paste packed in polyurethane bags and dipped in 4 ltrs. containers) [ warranty period: 12 months after the date of delivery ] ]

State Government

CTN :45285975

28 May, 2026 1.21 Crore

Daman - Gujarat

Tender For providing and supplying modular furniture for newly constructed government school building at kachigam, nani daman. - civil works, providing supply and installation of corner sink table -size :-1100mm l x 1100mm d x 900mm hconstruction : floor based welded cabinet system having storage body should be flush face construction with intersection of vertical and horizontal members like lh and rh side panel along with front horizontal channel, back panel and bottom panel. it should be relocated anywhere easily as it is an independent unit. cabinet should of square non-sharp edge construction. doors should be assembled with ss-304 hinge assembly. removable back panel should be provided to easily access the service lines running behind the cabinet benches. intermediate horizontal channels should be provided between door and drawer. toe-space of 90mm x 90mm is provided at front-bottom side of cabinet. levelers are provided for easy leveling of welded cabinet. shelf should be eight-bend panel with 20mm height. drawer tray should be of single piece construction. drawer should be well supported on lh and rh ball slide suspension system. steel door and drawer front should be of double wall construction with sound dampening material filled inside. doors should be easily removable and hinges should be easily replaceable. knee space panel should be in 22 gauge , cabinets are tested as per sefa 8m standard from a sefa approved lab and also tested as per en 14727 from a third party testing agency having nabl accreditation. dimensions : w= 900 mm, d = 900 mm, h = 875 mm configurations: 1 shutter - 1 nos moc: mscrca: is 513 (1994) thickness: lh/rh side panels, shutter front, bottom panel, top front, drawer separator, shelf, alignment channel is of 1.2mm thk. removable back panel, shutter cover, fr. rack strip, top cover panel is of 0.8mmthk. finish: powder coating pure epoxy, thickness 40-50 microns , followed with 9 tank pre treatment process the thickness of powder coat should be 45-50 microns, which passes the test of salt spray for 1000 hours. it should have a high temperature withstanding capacity with excellent electrical insulation properties.the rear portion of above accessories which is in contact with live metal should be made from thermo set material which will not melt on heating.handle : anodized aluminum recessed-type, ctc: 160.0mm lock: units have a locking facility with 180 and 10 lever cam lock mechanism (except for sink and corner unit) hinge: ss hinge screw: ss 304.shutter : should be of twin-type construction with sound dampening effect using profill.shutter cover should be equipped with bump on for sound dampening. base moulding should be made of pvc with corner clips. ball slide: 500mm length shutter should have provision of roller catch.pp sink,polypropylene molded sinks: made up of 5 mm thick high density and elastic poly propylene with good resistance to organic solvents. sink - bowl size to be a minimum of (l x w x d) 560 x 355 x 300 mm.faucet - 3-way type faucet as per approved makeworktop : jet black granite: it should be 19mm (+/- 2mm) thick jet black granite worktop. the exposed edges of the worktop should be chamfered and smoothened. the bottom of the worktop should be polished and there should be a v-groove throughout the length of the exposed edges to protect the cabinets from coming in contact with the spillages. the overhang on the storage cabinet is 25 mm at the front side and 30 mm at the sides. the backing material used is a neoprene mat of 6 mm thickness. (make as per selection of architect or selection of higher authority), providing supply and installation of corner table - size 1100mm l x 1100mm d x 900mm hconstruction: floor based welded cabinet system having storage body should be flush face construction with intersection of vertical and horizontal members like lh and rh side panel along with front horizontal channel, back panel and bottom panel. it should be relocated anywhere easily as it is an indepe

corporations/Associations/Others

CTN :45298504

26 May, 2026 NA

Bengaluru - Karnataka

Tender For auction sale of lcu-copper,ms scrap,dg battery with electrolytes,aluminum cable,cabinet,copper cable insulated,tx rack,solar panel,shelter panel,battery cabinet outdoor,dg cat-4

Central Government/Public Sector

CTN :45298231

18 Jun, 2026 NA

Jhansi - Uttar Pradesh

Tender For supply of paint aluminium brushing, bright finishing for general purposes to is:2339/2013 [reaffirmed 2018]. packing in 4 ltrs. dual containers [aluminium paste packed in polythene bags and dipped in 4 ltrs container]. [ warranty period: 12 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8lacs ] ]

Aluminium Paste Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government/Public Sector

State Government

corporations/Associations/Others

Central Government/Public Sector