Latest aluminium plate Tenders | Government aluminium plate Tenders

Central Government/Public Sector

CTN :45736147

07 Jul, 2026 NA

Perambalur - Tamil Nadu

Tender For supply of weighing machine -digital weighing scale capacity 200 kgs, accuracy 20 gram, checker plate top size 400 mm x 400 mm approx., of stainless steel , led display, response time- 3-4 seconds ,power- 220 v ac , battery backup: up to 12 hours. note: oem/authorized dealers only quote; oem/dealers warranty card to send along with material. calibration certificate/test report from government approved agency to be sent along with material [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45726897

06 Jul, 2026 NA

Kota - Rajasthan

Tender For wheel/tyre defect gauge for bg coaches as per railway boards approved irca part iv, rule 2.8.4 and plate 38, made of 3 mm thick hard alloy steel plate, used for inspection of condemn flange thickness, root radius, sharp flange, deep flange, flatness of tread etc. of wheel profile. condemning flange thickness of 22 mm & flat face of 50 mm gauges are to be supplied in separate carrying case and working manual. the gauges shall be supplied with certification from nabl/nabl accredited or govt. approved labs. first calibration valid for period two year ( warranty period : up to 30 months from the date of supply) [warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45710529

08 Jul, 2026 NA

Multi City - Haryana

Tender For auction sale of depot non ferrous scrap - scrap & condemned miscellaneous cast aluminium i.e.parts of locos,parts of distributor valve, housing assembly,aluminium plate for earthing, steady arm, antiwind clamp housing of wheel set earthing, leveling valve,junction boxes, blades etc of sort & sizes, complete or incomplete,with or w/o ferrous attachments,as it is, us & ur qty:- 2230.00 kgs loc:- material lying at office area-c,beside room no-e in nbg judw. remarks-[1]delivery will be given by actual weight on electronic weighing scale capacity-1000 kgs. [2]loading by purchaser.

CTN :45727070

09 Jul, 2026 NA

Haridwar - Uttarakhand

Tender For supply of bricks , sand , agg 20mm , agg 10mm , agg 63mm , coarse sand , cement , binding wire tata , white cement jk , wire brush , enamel paint gloss r y b g bk wh 6 ltr each , enamel paint matt r y b g bk wh 6 ltr each , turpentine oil , cotton waste , poster colour 12 shade , water tube colour 12 shade , glass marking pencil , distemper white , wall putty , emery paper 200 320 and 400 nos 25 each , stainer wall nut rose wood oak yellow red brown teak , washing thinner , touchwood 4 ltr pack , stain powder r br y bk 1 kg each , writing brush round 0 to 12 no , writing brush flat 0 to 12 no , water painting brush 0 to 12 no , oil painting brush 0 to 12 no , mixing plate tray , distemper brush , roller brush , putty blade , paint brush 1 inch , paint brush 2 inch , paint brush 4 inch , glass glue locitte , glass 2mm , glass 8mm , glass sanding disc , masking tape , acrylic putty , wall primer , canvas board 16 inch x 12 inch fine grain , universal stainer r y b g 1 btl each , diamond glazer , malmal cloth , duco primer , duco paint gloss r y b g bk wh 6 ltr each , duco paint matt r y b g bk wh 6 ltr each , duco thinner , pgi sheet 8 ft x4 ft x 24g , gi wire 2mm , gi wire 4mm , ms flat 1 pt 5 inch x 1 pt 5 inch x 5mm , ms flat 1 inch x 1 inch x 5mm , ms flat 2 inch x 1 inch x 5mm , ms square pipe 1 inch x1 inch x3mm , ms round pipe 1 inch x 3mm , ms rod 25mm , ms round bar 10mm , ms angle iron 25x25x3mm , ms angle iron 35x35x3mm , ms sheet 6 ft x 3 ft x 3mm , aluminium plate 3 ft x 4 ft , ms flat 2 inch x 5mm , gi pipe 3 by 4 inch , gi rivet no 8 500 gm , gi rivet no 10 500 gm , gi rivet no 12 500 gm , distilled water , u clip 6 mm , u clip 7 mm , u clip 9 mm , rawlplug 1 pt 5 , casing capping 25mm , extension board 15 amp modular , 3 pin top 15 amp , capacitor 42 mfd , fire fighting foam chemical 1 by 2 ltr btl , timber teak 10 ft x 2 inch x 2 inch cft 5 , timber sheesham 8 inch x 6 inch x 1 inch , plywood 8 ft x 4 ft x12mm , plywood 8 ft x 4 ft x 19mm , cnc bit flat bottom straight flutes bit 2 3 4 6 mm 5 each , cnc bit ball nose bit round tip 2 3 4 6mm 5 each , welding rod no 10 , cutting disc 14 inch , grinding disc 4 inch , grinding disc 8 inch , cutting disc 4 inch , aluminium filer rod 1 by 8 inch , brass rod 1 by 6 inch , copper rod 1 by 16 inch , brazing flux 1 kg pkt , acetylene gas , oxygen gas , co2 gas , nitrogen gas , soft coal , hack saw blade 12 inch , drill bit all size 2 to 13 mm bosch , power hacksaw blade 18 inch , black screw 3 by 4 inch 500 pc , black screw 1 inch 500 pc , black screw 2 inch 500 pc , sanding disc 4 inch , tile cutter blade 4 inch , tile cutter blade 121 by 141 bosch gdc , marbal grinding disc size 0 1 2 3 60 80 120 2 each size , marble polishing disc , silicon sealant with gun 250ml , pu expanding foam sealant with gun 250ml , spray paint gun , chain saw blade 18 inch , chain saw blade 16 inch , hand gloves , welding holder , hacksaw frame , duracell bty 1 pt 5v ultra

Central Government/Public Sector

CTN :45709681

13 Jul, 2026 NA

Multi City - Multi State

Tender For supply of one set consisting of following gauges- sr. no.1 : grease seal od ovaility checking gauge- gauge description - base plate diameter 300mm with basic accessories, dial indicator and od master gauge.(i) for measurement of od 209.187 at 6mm height for timken drg. no. e-58606 (hdl seal). (ii) for measurement of od 209.75 at 6mm height for skf drg. no. se-bt2-8515 d-23 (skf seal). (iii) od master gauge : od 209.78mm, with nabl calibration. (iv) digital dial indicator, model: 543-700, least count: 0.01mm, travel: 0-12.7mm, (purchased item), qty- 01 set, make: mitutoyo or equivalent. sr. no.2 : seal wear ring id ovaility checking gauge- gauge description-base plate diameter 300mm with basic accessories, dial indicatorand id master gauge. (i) for measurement of id 144.42 at 10mm height for timken drg. no. b-204944 (seal wear ring). (ii) for measurement of id 144.419 at 10mm height for neil drg. no. pesd-6075 (wear ringfor 6 x 11 class e ctrb). (iii) for measurement of id 144.45 at 10mm height for timken drg. no.rd-1637504 aa-13 (seal wear ring). (iv) id master ring gauge : id 144.42mm, with nabl calibrated. (v) digital dial indicator, model: 543-781, least count: 0.001mm, travel: 12.7mm, (purchased item), qty- 01 set, make: mitutoyo or equivalent. [ warranty period: 30 months after the date of delivery ] ]

CTN :45696125

13 Jul, 2026 NA

Palacode - Tamil Nadu

Tender For supply of equipment for mechanical engineering department - supply of equipment for mechanical engineering department, lathe machine :specification :bed: 2v & 2 flat, induction hardened and ground minimum bed length: 1375 mm bed width: 240 mm capacity: height of centre: 165 mm swing over bed: 320 mm swing over gap: 510 mm swing over cross slide: 180 mm distance between centres: 650 mm slides: cross slide travel: 200 mm compound slide travel: 115 mm spindle: spindle bore: 40 mm spindle nose: thread type, 62 mm spindle taper: mt-3 tail stock: quill diameter: 38.1 mm taper: mt-3 travel: 120 mm speed: no. of speeds: minimum 8 range: (40 800 )rpm threading: metric: (1 6 )mm (min 13 steps) english: (2 24 )tpi (min 19 steps) lead screw: (1 4) tpi electrical: motor: 1.5 hp, 230v/415v, 50 hz drive: v-belt structure: bed: close-grained cast iron (fg 260) gears: hardened steel base: rigid cast iron stand , open cup apparatus :specification :standard compliance: astm d92 / is 1448 (part 69) test method: open cup flash and fire point determination test cup: brass, precision machined with heat resistant handle heater: electric heater (1000 w 10% nickel chromium) with variable control heating rate: 5 6 c per minute (as per standard) temperature range: -6 to 400 c thermometer: astm 11c or equivalent flame applicator: gas test flame with fine control valvebody: stainless steel housing display: analog / digital temperature indicator power supply: 230v ac, 50 hz safety: overheat protection heat insulation , closed cup apparatus :specification :standard compliance: astm d93 / is 1448 (part 21) test cup:brass cup diameter: 50.7 50.8 mm capacity: minimum 70 ml stirring system heater: electric heater 650 w 10% heating rate: 1 12 c/min adjustable ignition: pilot flame with automatic shutter mechanism temperature measurement: thermometer or digital sensor(ip-28c or astm) display: digital temperature display power supply: 230v ac, 50 hz safety:over-temperature cut-off flame safety control , tail stock assembly :specification :medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, slip gauge :specification :set size: m87 (87 pieces) or equivalent range: 1.001 mm to 100 mm step sizes: 0.001 mm 0.005 mm 0.01 mm material: high-grade alloy steel / tungsten carbide (preferred) hardness: hrc 63 65 accuracy: grade: grade 1 or grade 2 flatne flatness / parallelism: 0.5 m stored in protective wooden boxes to prevent wear; calibration grades include charts for exact sizes , dc motor:specification :type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 pole construction: laminated stator salient poles accessible armature features: cut section / open type suitable for dismantling and reassembly, hydraulic cylinder :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steel calibration grades include charts for exact sizes supply: mounted on training base suitable for dismantling and inspection , hydraulic operated directional control valves (dcv):specification :type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study , bearing with shaft assembly :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply:mounted on training base suitable for dismantling and inspection , coupling unit using driving and dr

CTN :45689643

06 Jul, 2026 NA

Pune - Maharashtra

Tender For supply of turbo charger all seal replaced , turbo turust plate replacing , turbo bearing replacing , turbo bush replacing , turbo calibration

corporations/Associations/Others

CTN :45661832

02 Jul, 2026 1.87 Lacs

Kolkata - West Bengal

Tender For supply and installation of mechanical items for the tubewell at jogendra garden (wd-107) big-dia tubewell and other 19 nos. big dia tubewell under garfa big-dia t/w unit - chapter - viii supplying of materials m.s. blank flange as per is-6392 table 20 for 50 mm to size & for 200mm & above as is -6329 table-14)thickness 20mm-22mm nb diameter in mm 100, chapter - viii supplying of materials m.s. blank flange as per is-6392 table 20 for 50 mm to size & for 200mm & above as is -6329 table-14)thickness 20mm-22mm nb diameter in mm 150, materials and labour etc.(c)-(ii) cost of materials 1.supply of g. i. pipes of tata make including necessary sockets (i) 100 mm dia. (ii) heavy quality, materials and labour etc.(c)-(ii) cost of materials 1.supply of g. i. pipes of tata make including necessary sockets (k) 150 mm dia. (ii) heavy quality, materials and labour etc.(c)-(ii) cost of materials 1.supply of g. i. pipes of tata make including necessary sockets (h) 80 mm dia. (ii) medium quality, building works (f) structural steel works, grills, gates etc. b. repairing 2. welding in m.s. structural work withgas or electric: (b) continuous weld, building works. (u) - additional items : 20) supplying, fitting & fixing different factory made metal craft sheet (excluding cost of metal crafting) incluing cost of powder coating (for m.s, aluminium plate) & finished metal sheet with all fitting accessories complete in allrespect as per diection of engineer-in-charge. a)mild steel plate. i) 2.0mm thick, plumbing works (a)-(ii) g.i. pipe works and fittings 19(i) supplying, fitting and fixing pvc pipes of approved make of schedule 80 (medium duty) conforming to astmd - 1785 and threaded to match with gi pipes as per is : 1239 (part - i). with all necessaryaccessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. tting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (payment will be made on the centre line measurements of total pipe line including all specials. no separate payment will be made for accesories, specials. payment for painting will be made seperately) (a) for exposed work pvc pipes (dia) (h)80 mm, plumbing works (a)-(ii) g.i. pipe works and fittings 19(iii) supply of pvc pipes & fittings schedule 80 (medium duty) conforming to astmd - 1785 and threaded to match with gi pipes as per is : 1239 (part - i). (j) threaded end cap (dia) (n) 300 mm, plumbing works (a)-(ii) g.i. pipe works and fittings 19(iii) supply of pvc pipes & fittings schedule 80 (medium duty) conforming to astmd - 1785 and threaded to match with gi pipes as per is : 1239 (part - i). (j) threaded end cap (dia) (l) 200 mm, resting ring : fabrication and supply of protection device (resting ring) made from m.s. iron of size:o.d.10", i.d. 7" thickness 3/4" duly cross supported by 1/2" x 1/2" x 10" m.s. square bars welded firmly at all the ends complete., erection clamp - 4" dia : fabrication & supply of 4" dia erection clamp made from 1/2" x 4?" x 27" m.s. iron flat with making of 4 nos. 5/9" dia bolt holes and supplying of 4 nos. 5/8" dia x 3" long m.s. full thread bolts with nuts and washers., sub total, gst 9 %, gst 9 %, cess 1%

Central Government/Public Sector

CTN :45664149

08 Jul, 2026 NA

Ludhiana - Punjab

Tender For supply of set of (1) go gauges for checking of inner labyrinth (de) to plw drg. no. g-0564, qty- 01 no/set (2) go gauges for checking of bearing cap (nde) to plw drg. no. g-0569, qty- 01 no/set (3) go gauges for checking of clamp plate (nde) to plw drg. no. g-0570, qty- 01 no/set. each set consists of 03 items 03 nos. firm has to submit calibration certificate from any nabl approved lab. [ warranty period: 30 months after the date of delivery ] ]

CTN :45666967

04 Jul, 2026 NA

Krishnagiri - Tamil Nadu

Tender For purchase of civil lab equipments - equipments for lab, direct shear machine:standard compliance:the equipment shall conform to bureau of indian standards is 2720 (part 13) and equivalent astm international astm d3080.technical specifications:shear box size:60 mm 60 mm 25 mm specimen size (complete with grid plates, porous stones, and specimen cutter).normal load capacity:minimum 5 kn with loading yoke and calibrated loading hanger set.shear load capacity:minimum 2.5 kn or 5 kn with calibrated proving ring (with calibration certificate).rate of strain (shear displacement):variable speed drive with controlled displacement ranging from 0.01 mm/min to 1.25 mm/min (motorised model preferred for uniform rate control).displacement measurement:horizontal displacement dial gauge: 0.01 mm least countvertical displacement dial gauge: 0.002 mm or 0.01 mm least countloading frame:rigid, heavy-duty loading frame with corrosion-resistant finish.drive system:motorised with single phase 220 230 v, 50 hz power supply.accessories (to be supplied complete):shear box assemblyproving ring with calibration charttwo dial gaugesloading weights and hangerporous stones (2 nos.)specimen cuttertool kit, auger boring (or) any boring -soil sampling apparatus: engine type: 4-stroke, air-cooled, single-cylinder petrol engine displacement: 196 cc power output: minimum 6.5 7 hp ( 3.5 kw) maximum engine speed: ~3600 4000 rpm starting system: recoil (manual) start fuel type: pure petrol fuel tank capacity: minimum 1.5 1.6 l supported auger bit sizes: 4 , 6 , 8 , 10 , 12 , 14 (100 350 mm) bit material: heavy-duty mild steel with powder coating typical drilling depth: minimum 3.5 4 ft per bit (800 mm 1.2 m) bit coupling: quick-coupling system for easy bit replacements frame: robust tubular steel frame with ergonomic handles and vibration absorbers weight: minimum 20 22 kg (without auger bit), flow table test apparatus: dimensions and specifications as per is 9103, table top made from flat metal plate ,minimum thickness 1.5 mm, table top size:700 mm*700 mm ,with flatness tolerance of 1.5 mm.table top marked with: scribed cross at centre,lines parallel to table edges and central circle of 200 mm diameter underside of table top reinforced to prevent distortion. total mass of table top:16+_ 1kg table top base frame front and upper stops provided as per is 9103. lower front edge fitted with two rigid stops to transfer load directly to base frame. base frame designed to transfer impact load directly to supporting surface. minimizing bounce stop watch-digital -2 nos scale 1 mtr-2 nos mounting wooden platform 300 mm height amc for 3 years inclusive., drying oven:temperature range: ambient (room) up to 250 temperature control: digital pid controller / thermostat for accurate heating. prestogroupaccuracy: typically 1 2 c. chamber material: stainless steel inner chamber for durability and easy cleaning. air circulation: forced convection fan for uniform temperature. shelves: usually 2 3 adjustable shelves. power supply: single phase 220 230 v ac, 50 hz.

Aluminium Plate Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others

Central Government/Public Sector