Latest aluminium roofing Tenders | Government aluminium roofing Tenders

CTN :41272076

08 Aug, 2025 6.69 Lacs

Kavaratti - Lakshadweep

Tender For construction of segregation shed with material recovery facility centre for plastic waste management at agatti (re tender-i) - surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m., earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by engineer-in- charge:, providing and laying cement concrete 1:4:8 ( 1 cement: 4 river sand: 8 granite chips ) foundation and plinth., providing and laying cement concrete block (machine moulded) masonry in in foundation and plinth in cm 1:6 with blocks of size 40cmx20cmx15cm, providing and laying half block masonry in super structure above plinth level upto floor five level cement mortar 1:4 ( 1 cement 4 metal sand ) cement concrete block of size 40cmx10cmx15cm, 12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand), providing and fixing hand rail of approved size by welding etc. to steel ladder rail-ing, balcony railing and staircase railing including applying a priming coat of approved steel primer g.i.pipe, steel work in built up tubular trusses including cutting, hoisting fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shaped washers etc. complete. hot finished welded type tubes, providing aluminium sheet roofing fixed with galvnized iron jor l hooks and 8mm dia c.i plain bitumen washers complete excluding the cost of purlins, rafters and trusses corrugated sheet 0.56mm thick., cement concrete flooring 1:2:4 ( 1 cement, 2 metal sand,4 granite chips ) finished with floating coat of neat cement ,including cement slurry ,but excluding the cost of noising of steps etc.complete a) 40mm thick with 20 mm nominal size stone aggregate, providing ridges or hips in aluminium sheet roofing with g.i /j or l hooks bolts and nuts 8 mm dia g.i plain bitumen washers complete. 0.56mm thick., providing and fixing m.s welded mesh 50mmx50mm in position and applying a priming coat of approved steel primer with all necessary nails

CTN :41298980

11 Aug, 2025 NA

Kangra - Himachal Pradesh

Tender For supply of steel roofing through sheet or srt (steel profiles) as per is 1079 (q3)

CTN :41274944

11 Aug, 2025 32.14 Lacs

Baramulla - Jammu And Kashmir

Tender For supply of svl pd with integ power mgt sys - quick setting compound rapidite confirming to is specification. , natural sand. , aggregate 20mm. , aggregate 40mm. , load bearing concrete pcc soild blocks , integral water proofing compound , reinforcement. tmt steel bars 16 mm dia bar for rcc roof band , reinforcement. tmt steel bars 12 mm dia bar for rcc roof band , reinforcement.tmt steel bars 10 mm dia bar for rcc roof band , reinforcement.tmt steel bars 8 mm dia bar for rcc roof band , ms binding wire not less than 0.9mm dia annealed conforming to relevant is , ply wood 1.50m x 0.20 m and 12mm thick for shuttering of rcc roof band. , ply wood 10 mm thick as per requirement for flat surface , ismb 150 rsj 150 x 75mm 3.5 m long , ismb 150 rsj 150 x 75mm 1.20 m long , steel roofing trough srt of size 1630 x 613 x 180mm made out of 2mm thick hot , hdpe laminated sand bags of size 75 x 40cm sand colour and each bag having weight not less than 75 gms , pbs roll self finished tarfelt hessian base for water proofing grade- 1 . , silicone gel sealant of 01 pack of 400 gms including applicator gun , bitumen for filling of expansion joint of pcc , hdpe sheet having weight 100 gm sqm in black colour of width 5.50mm , pre fabricated steel window loop hole of size 600mm x450mm shall be provided with amn pd. , pre prefabricated steel door , pre fabricated steel shutter loop hole of size 2200mm x600mm shall be provided with svl pd. , pre fabricated steel shutter loop hole of size 1200mm x600mm shall be provided with svl pd. , ci grating of size 300 x 300 mm with frame not less than 4 kg. , pvc swr pipe 110 mm dia single socketed 3 mtr long , synthetic enamel paint colour og chocolate , red oxide primer conforming to relevant , oil bound distemper of approved brand. , thinner make asian berge shalimar. , chalk white , cement base paint. make duracem snowcem british xtracem , 10 mm thick base plate 400x400 for column , column ismb 250x175 56.90kg rm 3 mtr long , beam ismb200x100mm 25.40kg rm for first floor and roof 2.4 04 nosmtr long , beam ismb150x75mm 15kg rm for first floor and roof 2.4 04 nos and 2.2 04 nos mtr long , 8 mm thick ms plate connection between column and ismb 200x200mm , normal nut bolts 150mm long 16mm dia , 8mm thick ms plate for first floor 2.4 x 2.2mtr , 6 mm thick gable side wall ms sheet 14 nos 2.40x0.30m and 7 nos 2.20x.30m , ms steel angle 65x65x6mm 5.80kg rm for stair case , column shs 75x75mm 04 nos 3mtr length , beam shs 45x45mm 05 nos 2.40 mtr length , 8mm thick ms plate 150x150mm connection between column and beam , cgi sheet 3mtr x 1 mtr , 8mm thick ms plate 0.15 x 0.15mtr , normal nut bolts 150mm long 12mm dia , foundation bolt 450 mm long dia 16mm , pvc cable insulated and pvc sheathed 10 sq mm 2 core , switch socket combination 16 amp 3 pin , switch socket combination 5 6 amp one way , t w switch board 10 inch x8 inch , t w switch board 7 inch x4 inch , t w switch board 4 inch x4 inch , main swithch 32 amp two pole 240 v , change over switch 16 amp two pole 240 v conforming to is making havells standard , led tube light fitting 1x18 w 4 feet long complete with all accessories incl tube rod , led bulb 20 w , flexible wire twin core 23 00076 conforming to is 9537 pt iii 1983 , pvc conduit pipe 20 mm dia conforming to is 9537 pt iii 1983 , pvc l bend for 20 mm conduit pipe 20 mm dia , pvc round block squareblock rectangle block for mounting of switches socket etc. , ms screw 20 mm conforming to revelent is pkt of 100 nos , ms screw 25 mm conforming to revelent is pkt of 100 nos , tape insulation in 2 cm width 10 mtr roll confirming to isi 12714 , pvc saddle clip 20 mmconforming to is 3419 1976 , pendent holder bakelite , pvc insulated cable and pvc sheathed 2.5 sq mm 1 core copper conductor conforming to is 694 1990 , mcb 16 amp double pole 240v confirming to is 8823 1978 , mcb 6 amp two pole 240 v , mcb distribution bds 8 way single door with blank , switch socket combination 6 amp 3 pin , pvc junction box 2 to

CTN :41272031

09 Aug, 2025 8.10 Lacs

Multi City - Multi State

Tender For design, supply, installation, testing and fixing of high tensile sheet roofing with structural steel frame work for open court yard area of guest house 01 at nrsc balanagar campus

CTN :41266674

20 Aug, 2025 NA

Kupwara - Jammu And Kashmir

Tender For supply of hdpe laminated sand bag of size 75x40 cm sand colour and each bag having weight not less than 60 gms , shs 6 mm thick size 120x120mm x 2.1m long for column with holes as per tech spec and make of tata sail jindal or as per make att , ismb 150 rsj 150 x 75 mm g1 3050mm long for beam conforming to relevant is and make of tata sail jindal or as per make att , ismb 150 rsj 150 x 75 mm g2 2.2m long for beam 2 conforming to relevant is and make of tata sail jindal or as per make att , ismb 125 rsj 150 x 75mm g3 0.40m long for beam conforming to relevant is as per tech spec and make of tata sail jindal or as per make att , 6mm thick ms plate 150x150mm for shs column incl welding knoching cutting and nuts and bolts washer etc , 12mm dia nut bolt 75mm long inserted in 12mm dia eight nos hole in each column , steel roofing trough of size 1630 mm x 613 mm x 180 mm made out of 2 mm thick as per tech spec att , ms hexagonal nuts bolts and washers 12 mm dia 40 mm long. , ldpe sheet 3 m wide weighing 1.00 kg per rm black in colour and shall contain as per tech spec att , red oxide primer conforming to relevant is , synthetic enamel paint colour green ist quality conforming to relevant is as per tech spec att , thinner as per as per tech spec att . sample to be approved before supply. , dry distemper as per tech spec att. sample to be approved before supply , chalk whiting as per tech spec attsample to be approved before supply , paint brush 4 inch make amar or lucky sample to be approved before supply , pre fabricated double shutter steel door of size 1100mm x1900mm made out of 2mm thick ms black carbon sheet as per tech spec att , supply of swivel bullet proof glass glass 610mm x300mm size 72 mm thick as per tech spec att , silicone gel sealent of 01 pack of 400 gms including aplicator gun , ply wood 10 mm thick as per requirement for flat surface , foundation bolts of 16 mm dia and 250 m long with nut bolts washer etc. , stone aggregate to be crushed rock or gravel 20mm graded confirming to relevant is , manufacturing sand confirming to relevant is as per tech spec att , stone aggregate to be crushed rock or gravel 40mm graded confirming to relevant is as per tech spec att , rapidite quick setting liquid confirming to is 1344-2018 of make acclerec cico fosroc , integrated water proofing compound. , aluminimum straight edge 50mm squre 2mm thick 1800mm long , wooden flat gurmala , water leveling pipe pvc 100 mtr , hand rivet gun machine , drill bit 6mm dia , drill bit 8mm dia , tape measuring metallic 30 m , mason trowel , tasla iron 18 inch , shovel with wooden handle , axe picks with wooden handle , fawda with wooden handle , crobar 5 feet long , rammer with wooden handle of wt 5 10 kg , sieve for sieving fine and crose agg 900 x 1500mm made of angle iron frame with stand , brick hammer 1 and 2 kgs , cutting plier insulate 6 inch , screw driver 12 inch with insulated plastic , pipe wrench 12 inch , pipe wrench 18 inch , adjustable spanner 12 inch , hacksaw frame with 2 blade , hand gloves canvas with isi mark , aluminium sprit level 6 inch , brick line , plumbob

CTN :41196092

14 Aug, 2025 NA

Thiruvananthapuram - Kerala

Tender For supply of anchor bolt hook type 8mm , anchor bolt 6mm , anchor bolt 8mm , pvc coated wire , drill bit 6mm , drill bit 8mm , drill bit 12mm , drill bit 14mm , drill bit 16mm , flush tank , trolley wheels 75 mm dia heavy duty , ss cupboard handle 8 inch , ss drawer slider 16 inch long , drawer wheel 1.5 inch dia heavy duty , 1 inch black screw , 1.5 inch black screw , 1.25 inch black screw , 2 inch black screw , 0.50 inch counter sunk ss screw , 0.75 inch counter sunk ss screw , 1 inch self screw , 1.5 inch self screw , 1.25 inch self screw , 2 inch self screw , 0.50 inch self screw , 0.75 inch self screw , fisher 10mm , fisher 8mm , fisher 6mm , brass screw 2 inch , brass screw 2.5 inch , ss tower bolt 300mm long , glass cutter , m seal 250 g , ss curtain hook cup hook , ss bracket 20 mm dia for hanger rod , joint filler , rubber gloves , scrubber for tank cleaning , mop for tank cleaning , 16mm x 10cm nut and bolt with washer , 12mm x 10cm nut and bolt with washer , 10mm x 10cm nut and bolt with washer , 8mm x 10cm nut and bolt with washer , 6mm x 10cm nut and bolt with washer , calcium silicate false ceiling tile 600x600mm , gypsum false ceiling tile 600x600mm , false ceiling grid main tee , false ceiling grid 4ft tee , false ceiling grid 2ft tee , false ceiling grid 1 inch wall angle , false ceiling grid 0.75 inch supporting angle stay , g.i perimeter section for gypsum ceiling , g.i inter section for gypsum ceiling , g.i section for gypsum ceiling , gypsum screw gyproc for gypsum ceiling , 8mm anchor bolt gyproc for gypsum board , mr gypsum board 8x4 , gypsum joint putty , gypsum joint tape 2 inch , aluminium rivet 3.5mm , rivet gun , star bit , 3.5 mm metal bit , 6mm metal bit , 4mm metal bit , 6mm hilti bit , wheather strip for aluminium door , aluminium door pivot , 12 inch aluminium tower bolt , 8 inch aluminium tower bolt , aluminium door bolt 300 mm , o rubber , aluminium door lock godrej , cylinder lock , acp sheet 3.5mm viva , j corner pvc section , 7 by 8 corner pvc , small wheather strip for cupboard door , autocloser bit , ss autocloser hinge ebco , 0.75 inch gypsaw screw , 1 inch gypsaw screw , 1.5 inch gypsaw screw , 2 inch gypsaw screw , 2 inch wood screw , 3 inch wood screw , 18 inch aluminium cutting wheel , ss door handle 6 inch , gp pipe , ms angle , ms flat , dog chain for cylinders , cup brush for grainding , 6 inch rainwater gutter aqua star , rain water gutter clamp 6 inch , rain water gutter end cap 6 inch , rain water gutter drop 6 inch , rain water gutter connection 6 inch , 25x25mm plastic dummy , 40x40mm plastic dummy , 50x50mm plastic dummy , 60x40mm plastic dummy , 100x100mm plastic dummy , welding glass , welding holder , welding machine male connector , welding machine female connector , welding cable , concrete nail 2 inch , 100x100x4mm ms plate with hole , 150x150x4mm ms plate with hole , self screw bit for sheet , ms nut and bolt 1.5 inch long 8mm thick , gate hinge ms 1.5 inch , gate hinge ms 2 inch , ms aldrop 6 inch , 0.35mm trafford roofing sheet 10ft long , plain roofing sheet 0.35mm thick 2ft width , 0.35mm ridge sheet 8ft , 18 guage g.i plain sheet 8x4ft , banian waste , 3.5mm steel wire rope , 4mm steel wire rope , weld mesh 1 inch x 1inch , fevicol , wpc panal 32 mm thick 0.75x2.00m , wpc panal 32 mm thick 0.85x2.00m , skin door 75 x200 32 mm thick , skin door 90 x200 32 mm thick , magnetic catcher

CTN :41233769

09 Aug, 2025 NA

Baramulla - Jammu And Kashmir

Tender For supply of steel roofing through sheet or srt (steel profiles) as per is 1079 (q3)

CTN :41233927

07 Aug, 2025 1.40 Crore

Baramulla - Jammu And Kashmir

Tender For permanent defence pd rubik of size 2.55m x 2.55m o o and 2.10 m height with thickness of interlocking hollow block 25 mm thick , hdpe laminated sand bag of size 75x40 cm , shs 6 mm thick size 120x120mm x 2.4m long for column with holes , ismb 150 rsj 150 x 75 mm g1 3050 mtr long for beam , ismb 150 rsj 150 x 75 mm g2 2.20 mtr long for beam 2 , ismb 125 rsj 125 x 70mm g3 0.40 mtr long for beam , 6 mm thick ms base plate of size 150x150mm for shs column , 12mm dia nut bolt 75mm long inserted in 12mm dia eight nos hole in each column. , steel roofing trough srt of size 1630 mm x 613 mm x 180 mm made out of 2 mm thick hot rolled carbon steel sheet , ms hexagonal nuts. bolts and washers 12 mm dia 40 mm long. , ldpe sheet 3 m wide weighing 1.00 kg rm black in colour , red oxide primer conforming to relevant is , synthetic enamel paint colour green , thinner sample to be approved before supply , dry distemper sample to be approved before supply , chalk whiting sample to be approved before supply , paint brush 4 inch , pre fabricated double door shutter steel door of size 1100mmx1900mm made out of 2mm thick , supply of swivel bullet proof glass glass 610mm x300mmx 72 mm thick , silicone gel sealent of 01 pack of 400 gms including aplicator gun , ply wood 10 mm thick for pcc form work. , foundation bolts of 16 mm dia and 250 m long with nut bolts washer etc. , sifcon pre fabricated interlocking rcc blocks. , aggregate 20mm. , natural manufactured sand , aggregate 40mm , rapidite conforming to is 1344 2018 make acclerex cico fosroc , integrated water proofing compound. , aluminimum straight edge 50mm squre 2mm thick 1800mm long , wooden flat gurmala , water leveling pipe pvc 100 mtr , hand rivet gun machine , drill bit 6mm dia , drill bit 8mm dia , tape measuring metallic 30 m , mason trowel karchi , tasla iron 18 inch , shovel with wooden handle , axe picks with wooden handle , fawda with wooden handle , crobar 5 feet long , rammer with wooden handle of wt 5 10 kg , sieve for sieving fine and crose agg 900 x 1500mm made of angle iron frame with stand , brick hammer 1 2 kgs , cutting plier insulate 6 inch , screw driver 12 inch with insulated plastic , pipe wrench 12 inch , pipe wrench 18 inch , adjustable spanner 12 inch , hacksaw frame with 2 blade , hand gloves canvas with isi mark , aluminium sprit level 6 inch , brick line , plumbob

CTN :41203405

14 Aug, 2025 NA

Kamorta - Andaman And Nicobar Islands

Tender For supply of materials/items for mgnrega works nancowry block for fy-2025-26 - rate for accssible ares (kamorta & nancowry islands), cement (o.p.c) 43-grade, crusher dust good quality, pulverised sand good quality, coarse sand good quality, boulder 40-90mm, stone aggregate 40 mm, stone aggregate 20 mm, stone aggregate 12.5/13.2mm, cement concrete hollow block 40x15x20 cms, cement concrete hollow block 40x10x20 cms, m.s flat various size, m.s angle various size, tmt steel bars various size, binding wire good quality, nailsvarious size, nut & bolt various size, j hook various size, coach screw with cap washer 2 , self type screw various sizes as per requirement, ply wood anti-termite (commercial), approved/ reputed brand. 12 mm thick, ply wood water proof & factory painted (marine), approved/ reputed brand. 19 mm thick, pre painted galvanised (ppgi) roofing sheet 9 feet, ppgi plain sheet 2 feet width, cement primer (reputed brand.) good quality, wood primer (reputed brand.) good quality, oil bound distemper (reputed brand.) good quality, synthetic enamel paint (reputed brand) good quality, painting brush (amar) various sizes, sliding bolt make classic 300x16mm, window handles (anodized) various sizes as per requirement, iron hinges various sizes as per requirement, tower bolt (anodized) various sizes as per requirement, w/c pan complete set make hindustan or any other reputed company indian type (460x440) mm, pvc pipe make hindustan 100 mm, pvc pipe 3 inch, thinner make sheenlac good quality, steel hand saw for wood good quality, saw file (triangular) 4 inch, augur 3/8 inch, wooden shuttering with propping good quality wood, g.i. wire mesh of dia. 4mm, pvc coated to achieve outer dia. not less than 5mm in required colour, shade and height. (reputed brand) mesh size 100x100mm, pre cast rcc post for fencing top width-12cm, bottom width-15cm, height-1.70m, main bars-4 nos.10mm dia, stirrups-8mm dia @100mmc/c spacing, rcc mix-1:1.5:3, pre-cast rcc hume pipe. inner dia-1.00m, length-1.00m, thickness-10cm, main bars-12mm dia, stirrups-10mm dia @100mmc/c spacing, rcc mix-1:1.5:3, pre-cast rcc hume pipe inner dia-0.50m, length-1.00m, thickness-10cm, main bars-12mm dia, stirrups-10mm dia @100mmc/c spacing, rcc mix-1:1.5:3, pre-cast rcc ring for c/o ring well inner dia-2.0m., height-30cm, thickness-8cm, vertical main bars- 8mm dia@10cm c/c spacing , and 3 nos. 8mm dia distribution bars of rcc mix-1:1.5:3, plump bob good quality, sledge hammer good quality, ball peen hammer good quality, try square good quality, trowel good quality, mixing pan good quality, pvc cowl 100mm, pvc door frame make rajshree 50x47mm wide 5mm thick, pvc door 30x50mm wide 5mm thick and 75mm wide pvc sheets for top rail, preparation & installation of citizen information board fully metallic board of (4x3) feet on 4 feet stand. black coloured board with information written in white and have to fix with concrete footing at work site, preparation & installation of citizen information board fully metallic board of (2x3) feet on 4 feet stand. black coloured board with information written in white and have to fix with concrete footing at work site, preparation & installation of citizen information board fully wooden board of (4x3) feet on 4 feet stand. black coloured board with information written in white and have to fix proper footing support., mooram good quality, epoxy paint standard, red oxide paint standard, welding charges arc welding, mixer machine (on hire) 10/7 cubic feet or 1 bag capacity, hiring of road roller8 tonne, precast rcc circular slab of 1.44 sqm,thickness-5 cm, main bars-8 mm dia, distribution bars-8mm dia @100mm c/c spacing, rcc mix-1:1.5:3, rate for inaccssible areas (katchal, teressa & chowra islands), cement (o.p.c) 43-grade, crusher dust good quality, pulverised sand good quality, coarse sand good quality, boulder 40-90mm, stone aggregate 40 mm, stone aggregate 20 mm, stone aggregate 12.5/13.2mm, cement concrete hollow b

CTN :41057767

30 Jul, 2025 7.00 Lacs

Kangra - Himachal Pradesh

Tender For bid to ras supply of steel roofing through sheet or srt (steel profiles) as per is 1079 (q3)

Aluminium Roofing Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors