Latest aluminium sheet Tenders | Government aluminium sheet Tenders

Central Government/Public Sector

CTN :45736327

16 Jul, 2026 NA

Jodhpur - Rajasthan

Tender For supply of fire retardant neoprene rubber sheet for cable trenches in electric locomotives of thickness 1.5 mm +/- 0.2 mm & width 1000 mm, to clw spec. no. clw/es/r-24/d or latest. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

State Government

CTN :45719782

04 Jul, 2026 NA

Rampur Hat - West Bengal

Tender For supply of materials for mgnrega works - supply of materials, earth, coal (steam), carriage of tar bitumen, bitumen vg-30, bitumen emulsion, stone screening type a (13.2 mm), stone screening type b (11.2mm), stone screening type a (13.2 mm), coarse sand, stone aggregate(single size): 06 mm nominal size, grade 1 stone metal 63 mm to 45 mm, 1st class picked jhama bricks(traditional), 1st class bricks, coarse sand, stone boulder ( 225mm-150mm ), coloured inter locking c.c. paver block, fine sand, silver sand, portland cement, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 10 mm nominal size, loading unloading & stacking sand/ stone aggregate (less than 40mm nominal size), stone aggregate(single size): 40 mm nominal size, precast cement concrete blocks (nominal mix. 1:1.5:3 with 20 mm down coarse aggregate including supplying at site, laying and finishing the top surface with 1:3 cement mortar), medium sand, udaypur marble slab ( for floor, lobby etc) 18 mm thick of size 0.3 sq m to 0.6 sq m, chawk dungri marble slab ( for floor, lobby etc) 18 mm thick of size 0.3 sq m to 0.6 sq m, udaypur marble slab ( for wall/dado) 18 mm thick of size 0.3 sq m to 0.6 sq m, chawk dungri marble slab ( for wall/dado) 18 mm thick of size 0.3 sq m to 0.6 sq m, ceramic glazed tiles ist quality 300 x 300 mm in all shades and designs of white, ivory, grey, fume red brown etc., rectified - ceramic glazed tiles ist quality 300 x 300 mm or more in all shades designs white, ivory, grey, fume red brown etc, vitrified floor tile 60x60 cm, precast chequered cement tiles 22 mm thick dark shade using ordinary cement, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, vibrator (needle type 40 mm), water tanker 5000 ltr. capacity, r.c.c. pipes np2 class 300 mm dia, r.c.c. pipes np2 class 450 mm dia, rcc pipe 600 mm dia np- 3 spigot, carriage of r.c.c. pipes 600,700,750 & 800 mm dia, loading, unloading & stacking by manual means (r.c.c. pipes , c.i. pipes and unreinforced cement pipes) 600, 700, 750 & 800 mm dia, rcc pipe 900 mm dia np - 3 spigot, carriage of r.c.c. pipes 900 mm dia, loading, unloading & stacking by manual means (r.c.c. pipes , c.i. pipes and unreinforced cement pipes) 900 mm dia, empty gunny bag, bamboo (8cm-10cm dia) including fixing, nail, sal bullah (7.5cm -10cm dia), eucalyptus bullah (7.5cm -10cm dia), sal bullah (12.5cm -15cm dia), sal bullah (17.5cm -20cm dia), eucalyptus bullah (7.5cm -10cm dia), eucalyptus bullah (12.5cm -15cm dia), eucalyptus bullah (17.5cm -20cm dia), sausage wire net, galvanised steel corrugated sheets, galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots, galvanised steel j or l hooks 8 mm dia, false ceiling (with 4mm thick pearl designer fibre cement board), supplying, fitting & fixing asbestos corrugated sheet(6 mm thick), supplying, fitting & fixing asbestos ridging, supplying, fitting & fixing zn-al alloy steel sheet work in roof, supplying, fitting & fixing aluminium sheet ridging, fitting and fixing glass reinforced polyester translucent fiber glass sheet, fitting and fixing glass reinforced polyester translucent ridging, fitting & fixing circular corrugated aluminium sheet, tor steel rods/hysd bars/tmt bars(jsw/jspl/shyam/srmb/bmasl/elecrosteel/ssl)(fe415/fe500/fe500d conforms to is: 1786), tor steel rods/hysd bars/tmt bars (other than sail/tata/rinl/jsw/jspl/shyam/srmb/bmasl/elecrosteel/ssl)(fe415/fe500/fe500d conforms to is: 1786), brick aggregate (single size):40 mm nominal size, moorum, stone aggregate(single size):63 mm nominal size, river bed material, geotextile 120 gram per sqm membrane, hire charges of shuttering plank (25mm-30mm thick) with prop including all fittings, hire charges of shuttering plank (25mm-30mm thick) without prop including all fittings, hire charges of shuttering plank (above 30mm-37mm thick) with prop including all fittings, thermocol 12.5 mm thick., polythene sheet (150 gm

Central Government And Public Sector

CTN :45722240

20 Jul, 2026 NA

Kamega - Arunachal Pradesh

Tender For supply of day to day consumable items for maintenance of turbines of kameng hps - best quality stainless steel shim (ss304) of thickness 0.02 mm, width: 400mm, best quality stainless steel shim (ss304) of thickness 0.06mm, width: 400mm, best quality stainless steel shim (ss304) of thickness 0.07mm, width: 400mm, best quality stainless steel shim (ss304) of thickness 0.08 mm, width: 400mm, best quality stainless steel shim (ss304) of thickness 0.09 mm, width: 400mm, best quality stainless steel shim (ss304) of thickness 0.10 mm, width: 400mm, best quality stainless steel shim (ss304) of thickness 0.12 mm, width: 400mm, best quality stainless steel shim (ss304) of thickness 0.14 mm, width: 400mm, best quality stainless steel shim (ss304) of thickness 0.25 mm, width: 500mm, stainless steel shim (ss304) of thickness 0.50 mm, width: 500mm, best quality neoprene rubber cord 4 mm, best quality neoprene rubber cord 5.5 mm, best quality neoprene rubber cord 6 mm, best quality neoprene rubber cord 7 mm, best quality neoprene rubber cord 8 mm, best quality neoprene rubber cord 10 mm, best quality neoprene rubber cord 11 mm, hylomer blue gasket jointing sealant, champion make asbestos free oil-250 gasket, 3 mm thk (1500 mm x 5000 mm), best quality nitrile rubber sheet, size: 600x1000mm, 1.5 mm thickness, best quality nitrile rubber sheet, size: 1200x1000mm, 3 mm thickness, loctite 406 (20gm), anabond 666t-max (100gm), loctite si 595 (300 ml), loctite 243 threadlocker (50 ml), skf bearing grease 3in/5, m12x100 hilti anchor bolt, m16x150 hilti anchor bolt, m20x200 hilti anchor bolt, m12x 100 grade: 8.8 bolt with nut & washer, m16x 100 grade:8.8 bolt with nut & washer, m20x 100 grade:8.8 bolt with nut & washer, m20 full threaded stud, grade: 8.8 of length 1m, m12 full threaded stud, grade: 8.8 of length 1m, m16 full threaded stud, grade: 8.8 of length 1m, gland packing, make: stoplik, style-99, size: 10mm, paint brush flat 50mm, paint brush flat 75mm

CTN :45738387

10 Jul, 2026 NA

Rajauri - Jammu And Kashmir

Tender For supply of electrodes welding steel armour 4 point 00mm , electrodes welding steel mild general p 3439 000016 , electrodes welding steel mild general p 3439 000018 , steel angles 20 by 20 by 3 mm , steel angles 25 by 25 by 3 mm , steel angles 45 by 45 by 5 mm , steel bar carbon hot rolled round 12 mm , steel bar carbon hot rolled round 20 mm , turpentine , aluminium sheet soft 4.06mm , fevicol sr 998 , paint rfu black , paint rfu marking signal red , paint rfu marking white , paint rfu marking black , paint rfu ad br spr syn ena sea green , paint rfu fin syn ena br spr black , paint rfu priming red oxide

CTN :45358224

14 Jul, 2026 11.40 Lacs

Kota - Rajasthan

Tender For corrigendum : tn-25151 supply of miscellaneous rubber items at kstps, kota. - "white rubber insertion sheet made from superior quality natural/ synthetic/ blend rubber free from surface defects, porosity and grit conforming to is6381/1979. the reinforcement fabric used for white rubber insertion sheet should with stand minimum area", 3.0 mm , 5.0 mm, love-joy spider set in following sizes:, l-50, l-70, l-75, l-90, l- 95, l- 100, l - 110, l - 150, l-190, l-99/100, l-225, l-226, l-276, soft seal for 600 nb b/f valve make-m/s i/l ltd. od-577, id-522 mm.pcd-548 mm. hole dia 9 mm. no. of hole-20 th-10.0 mm. material- nitrile rubber shore hardness 60 + 5 on 'a' scale. , nitrile rubber gasket for 300 nbci/ ms pipe single side tapered id-320, od-345, h-10/28, th-4/12.5 mm. , nitrile rubber gasket for 150 nb wet slurry line single side tapered id-166 mm. od-190 mm. h-22/35 th-5/12 mm. , rubber coupling bush for sump drain pump id=22 mm, od=38, l=40 mm, rubber pad for love joy coupling c-280 , victaulic coupling rubber gasket -18l, victaulic coupling rubber gasket -18h, "victaulic coupling rubber gasket -20l", victaulic coupling rubber gasket -20h, seal kit set 3/8" 3way solenoid valves as per sample one set contains 6 pieces, vibration damping rubber pads/block for stacker reclaimer#1 size od=210 to 200(tapper).length=125 mm centre hole dia.=85 mm (sample piece available at site), neoprene rubber coupling pad size 40x40x20 mm, neoprene rubber brush size (idxodxlength ), 20x38x40, 32x50x55, 35x55x60, rubber cushion pad c-280, tyre coupling tc-011, tyre coupling tc-019, tyre coupling tc-013, rubberized cork sheets confirming to is :4253 pt-ii of 1980 rc-70c grade size of sheet :915x610x2.00 mm, rubberized cork sheets confirming to is :4253 pt-ii of 1980 rc-70c grade size of sheet :915x610x4.00 mm, rubberized cork sheets confirming to is :4253 pt-ii of 1980 rc-70c grade size of sheet :915x610x6.00 mm, rubberized cork sheets confirming to is :4253 pt-ii of 1980 rc-70c grade size of sheet :915x610x8.00 mm, dresser coupling rubber gasket for16'' for feed pipe, dresser coupling rubber gasket for36'' for coal valve gate raw coal feeder, gun metal rubber bush for feeder drive nitrile rubber gun metal bush id 22.5mm ,od 32mm,length 40 mm rubber bush od 44.5 mm ,length 40 mm, rock well coupling gasket 20l, enddoor gasket for stg-i (1 set consisting 2 nos. rare and 2 nos.front ), enddoor gasket for stg.-ii,iii,iv,v consisting (2 nos. rare and 2 nos.front ), rubber spider set :, sw-rrs 190/140, sw-190, rubber coupling bush for fd/pa fans of stage-i as per drawing , rubber coupling bush for fd/pa fans of stg-ii as drawing, rubber coupling bush for fd/pa fans of stg- iv/v as drawing, rubber gromet gasket for id/pa fans as per drawing u#3 to 7, victaulic coupling rubber gasket size 22l made of silicon rubber for pf pipe of u#5, 6&7. tech. specs: max. temp. 160-180 degree. a industrial grade scale, soft seal for 400 nb b/f valve make-m/s i/l ltd. od-357, id-307 mm. pcd-323 mm. hole dia 8 mm. no. of hole-16 th-9.0 mm. material- nitrile rubber shore hardness 60 + 5 on 'a' scale. , rubber pad for love joy coupling swq-280/140

CTN :45713505

13 Jul, 2026 NA

Seoni - Madhya Pradesh

Tender For supply of rubber leggings - rubber lagging, rubber lagging,neoprene bonding,thk:12mm"plain- pulley lagging sheet with neoprene bonding layersp.gr: 1.17gm/cc, hardness: 65(+/-5) shore a, tensile:115 kg/cm2, elongation: 450%(min) width - 2m thickness - 12 mm", rubber lagging,diamond groove,thk:15mm"daimond groove - pulley lagging sheet with neoprene bonding layersp.gr: 1.17 gm/cc, hardness: 65(+/-5) shore a, tensile:115 kg/cm2, elongation: 450% (min) width - 2m thickness - 15 mm"

CTN :45730362

08 Jul, 2026 NA

Patiala - Punjab

Tender For painting and hardware material, wood plyboard & glass panes for c-22 (creche) (part-a) at pup - oil bound distemper, wall care putty , neel , sand paper universal water stainer tube yellow oxide , s/e white paint ist quality 20 litre capacity , s/e oxford blue paint , fevicol ddl ,t.t. oil, paint brush, red marindi wood, kail wood, commercial plywood,wire netting 22x12 gauge,glass panes , m.s. hinges , aluminium tower bolt, aluminium handle , m.s. black nails , m.s. nails m.s. screw , iron door spring , wood primer , m.s. nails , fevicol sh , aluminium sheet , p.o.p. , malmal, lime.

CTN :45732497

08 Jul, 2026 NA

Ambala - Haryana

Tender For supply of insulation material and work, insulation work-aluminium sheet, lrb-50 mm, coconut rope ,bamboo size : 20 ,16 , 12 ,haisine cloth ,bitumine mackote

CTN :45704835

11 Jul, 2026 2.33 Lacs

Bulandshahr - Uttar Pradesh

Tender For tender for supply of rubber goods - rubber taper plug size-98/102mm , neoprene material , rubber v seal ring nk-1100 b type continuous machine od-109mm id-89mm (biig size ) od-95mm id-83mm (small size) as per sample , rubber taper plug size-42/45mm , rubber o ring size-od-13mm id-10mm as per sample for a type centrifugal machine , rubber seat for double beat valve size235x30x12mm , rubber squeezer/scrapper for door mud/juice size-800x100x12mm , rubber seat for double beat valve size335x30x20mm , rubber strip for juice heater size3/4 inch x 3/4 inch x 1/2 inch , rubber bucket ring for telescopic valve , neoprene material , neoprene material , neoprene material , rubber buffer for hopper as per drg no asr/cp-15-r-1 , venjo rubber hose pipe 3/8 01 mtr , rubber hose pipe for mill size-bor-20mm od32mm , rubber hose pipe for mill size-bor-20mm od32mm , rubber hose pipe for vacuum filter size-2.25 inch bore x18 inch length , rubber mud seal size-35x35mm , mud scrapper belt (patta) for vacuum filter , rubber buffer for centrifugal machine as per sample , rubber sheet drg no asr/bh/pan/22/96 , bottom cylinder o ring , neoprene rubber sheet for main hole size- id440 od-525mm thickness -16mm , rubber bush , dholak type rubber bush , rubber tyre ph-272 , rubber tyre ph-250 , neoprene make rubber sheet for 700m2 vapour cell vapour outlet valve as per drg no asr/bh/29802 , neoprene make rubber sheet for semikeshner exhaust inlet valve as per drawing no 102/1993 , neoprene make rubber sheet for semikeshner 1100m2 vapour outlet valve as per drg no asr/bh/12/12/16 , neoprene make rubber sheet for 2000m2 vapour cell vapour outlet valve as per drg no asr/bh/8/2023 inlet valve , neoprene make rubber sheet for 2000m2 vapour cell exhaust inlet valve as per drg no asr/bh/9/2023 , neoprene make rubber sheet for 700m2 vapour cell exhaust inlet valve , rubber bush , neoprene make rubber sheet for 700m2 vapour cell vapour cell exhaust inlet valve id515 od-645 , neoprene make rubber sheet for old quad 1st body vapour inlet valve as per drg no asr/bh21003 , rubber hose pipe both end contactor 1/2 inch x 1 1/2mtr , rubber sheets for vapour inlet valve of 50 ton pan drg no asr/bh/70 , rubber sheets for vapour inlet valve of 60 ton pan as per drg no asr/bh/pan/12/09/022

CTN :45712028

07 Jul, 2026 NA

Shahjahanpur - Uttar Pradesh

Tender For providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - industry unit; work of lagging cladding for season 2026 27; service provider - thermal insulation by providing light raising bonded slap (lrb slap) density 100 kgs/m3 & aluminium sheet 22swg g.i. wire 20 swg fixing of g.i. screw pan head 8x 13mm by grooving all joint with necessary overlapetc job involve the work of cleaning of surface area if required for insulation different station/ equipment with material rates as per isi norms

Aluminium Sheet Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

Central Government And Public Sector