Latest aluminium ventilator Tenders | Government aluminium ventilator Tenders

State Government

CTN :41248992

12 Aug, 2025 NA

Jhabua - Madhya Pradesh

Tender For e-tender for material required for construction work--name & description of material, iron rebar 6,10,12 mm isi a iron articles gate, door, signboard, ventilation, etc., aj hook for fencing in kg, winding wire in kg

State Government

CTN :40741630

18 Aug, 2025 16.84 Lacs

Kheda - Gujarat

Tender For corrigendum : work of routine, preventive and breakdown maintenance of air washer systems & ventilation systems of 1 x 800 mw wanakbori tps on as & when required basis

Central Government/Public Sector

CTN :41220454

18 Aug, 2025 75.52 Lacs

Cuddapah - Andhra Pradesh

Tender For tender for supply of replacement on autoclave impellers and repairing of agitator shafts : : - dismantling of drain flanges 06 numbers , top side 02 flanges for ventilation purpose , removal of impellers in one autoclave (around 24 impellers) , removal of any other flanges (total about 08). (for autoclave-1) , replacement of impellers in one autoclave (around 24 impellers)) (supply of inconel 600 impellers are in scope of ucil) , erection of drain flanges 06 numbers , top side 02 flanges (for ventilation purpose) , boxing up of any other all flanges (total about 8). (for autoclave-1) , dismantling of drain flanges 06 numbers , top side 02 flanges for ventilation purpose , removal of impellers in one autoclave (around 24 impellers) , removal of any other flanges (total about 08). (for autoclave-2) , replacement of impellers in one autoclave (around 24 impellers)) (supply of inconel 600 impellers are in scope of ucil) , erection of drain flanges 06 numbers , top side 02 flanges (for ventilation purpose) , boxing up of any other all flanges (total about 8). (for autoclave-2) , removal of set of 6 agitators from autoclave , repairing , re fixing with scope of work as follows refer the tender document for the complet scope of work (for autoclave-1) , removal of set of 6 agitators from autoclave , repairing , re fixing with scope of work as follows refer the tender document for the complet scope of work (for autoclave-2)

CTN :41235853

18 Aug, 2025 98.0 Thousand

Multi City - Telangana

Tender For procurement of general items required for bhupalpalli area - m.s. bolts & nuts, rivets, washers & screws, dog nails, fish plates, nuts & bolts for fish plates, belt jointing pins, cable hooks and signal hooks, belt conveyor rollers, belt sections, resin capsules, cement capsules, gi canisters , blasting gallery – spacers, radiator repairs, repairs and rewinding of motors of ac & dc, repairs / rewinding of transformers (welding / lighting/ power), gi wire, wire mesh for longwall salvage, manufacturing of supply of electrical coils for , ac motors up to 6.6 kv grade and transformer coils up to 33 kv grade, repairs of rotors for electric motor, lighting cable, steel chock manufacturing, house wiring, all types of fan repairs, shovel bucket welding, repairs of pumps, couplings manufacturing, special steel and alloy castings (tooth points, track pads, mn steel casting), manufacturing of fly ash bricks. (not to be manufactured at stores site. it shall be at their own site)., manufacturing of pump components (spares)., transformer oil filtration, reconditioning of drill bits and drill rods, vulcanizing the old trailing cables of drill machines, sdls, lhds, etc. (work should be carried out at the respective mine premises). , manufacturing of earth clams, g.i flats, g.i bolts and nuts., manufacturing of earth pit components and erection., crimping of hydraulic hoses., repairs to hydraulic pumps, motors, control valves and other related components, refurbishing of lt & ht switches with oem spares including testing., manufacturing / repairs of slip rings & d-contacts., furniture repairs i.e., cane chairs, table, almirahs, etc., repairs to wet grinders, water purifiers, and water coolers, manufacturing of coupling bolts of all sizes, fabrication of oht line components like cross arms, clamps, stay wires, cross brassings, base plates etc., manufacturing of haulage rope drum rollers., all sizes of ventilation doors.

State Government

CTN :41189956

31 Jul, 2025 5.25 Lacs

Shimla - Himachal Pradesh

Tender For name of work : request for quotations for the supply of life equipments for transhumant/nomads under vety. camps for the year 2025-26. - annexure-a, tarpaulin : (hdpe , 200 gsm, 15 ft x 18 ft), light weight tent :polyester tent for camping quick pop-up camping with fiber poles , superior air ventilation ,waterproof pu coating house , portable & foldable , capacity 4 person

State Government

CTN :41204633

31 Jul, 2025 17.86 Lacs

Delhi - Delhi

Tender For maintenance of completed scheme under na-ii/south zonesh-providing and installation of digital safety system and safety equipments in community halls of kishangarh and harkesh nagar (specialized work) - supplying and installation of high quality image with 4 mp ip bullet camera, audio recording 1/2.8"cmos sensor, 4 mp (1920*1080)@30/25fps; 720p (1280*720)@30/25fps, ultra 265, h.265, h.264, smart ip, up to 30m (98ft) ip distance, day/night functionality, 2d/3d dnr (digital noise reduction), ip67 protection, support poe power supply, 3- axis, , lens - 2.8 mm- 6 mm@f2.0, adjustment angle, pan: 0 ~ 360 , shutter - auto/manual, 1 ~ 1/100000s, minimum illumination - colour: 0.01lux (f2.0, agc on) 0lux with ir on, , digital noise reduction - 2d/3d dnr, day/night - ir-cut filter with auto switch (icr), s/n - >52db, ir range - up to 30m (98ft) ir range, wave length - 850metre, ir on/off control - auto/manual, defog -digital defog, wdr - dwdr, 10/100m base-tx ethernet, ce: en 60950-1 ul: ul60950-1 fcc: fcc part 15, complete as req. make:- hikvision / advidia / dahua/bosch or equivalent as approved by the engineer-in-charge., supplying of nvr support ultra 265/h.265/h.264 video formats, 16-channel input, third-party ip cameras supported with onvif conformance: profile s, profile g, profile t, support 1-ch hdmi, 1-ch vga, hdmi at up to 4k(3840x2160) resolution, hdmi and vga simultaneous output, up to 4k resolution recording, 4 sata hdd up to 10tb, support cloud upgrade, ip video input - 4-ch, upto 160 mbps incoming and outgoing bandwidth, remote users - 128, protocols - p2p, upnp, ntp, dhcp, pppoe, video/audio output - hdmi/vga output - hdmi: 3840x2160/30hz, audio output - 1-ch, 3.5mm ,decoding format - ultra 265/h.265/h.264, sata - 1 sata interface, capacity - up to 6tb for each disk, network interface - 1 rj45 10m/100m self-adaptive ethernet interface complete make:- hikvision / advidia / dahua/ bosch or equivalent as approved by the engineer-in-charge, supplying of 6 tb hdd for nvr complete as req. make- seagate, wd, toshiba or equivalent as approved by the engineer-in-charge., supplying of 16 port gigabit poe switch easy smart managed 16 poe+ (802.3at/af)10/100/1000 mbps rj45 ports providing up to 30w per port total @ 250 watt, 2 non-poe ports total 18 port 2 combo sfp slots for high speed connection i/c testing etc. complete as req. make: cisco/ tp link/ juniper/ netgear/ or equivalent as approved by the engineer-in-charge., supplying and drawing of utp 4 pair cat 6 lan cable in the existing surface/recessed steel/ pvc conduit as required and approved by the engineer-in-charge. make: d-link/ cp-plus/ finolex / havells or equivalent as approved by the engineer-in-charge., supplying of fixing of following sizes of medium class pvc conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. a) 25 mm as approved by the engineer-in-charge., supply, installation, commissioning of 43 (108 cm) 4k ultra hd smart led tv with usb port for cctv surveillance system i/c testing etc. as required. make: samsung / lg/ sony or equivalent as approved by the engineer-in-charge., supply, installation, commissioning of 6u outdoor weatherproof rack confirms to ip55 outdoor standards. adjustable 19 equipment mounting verticals provide better mounting flexibility and maximize the usable mounting space depth adjustable mounting slots pole/ wall mounting provision on rear side top panel with ventilation cable entry from bottom. pdu of 6 socket and fan, lockable toughened glass door, powder coated sheet metal cabinet factory with accessories i/c wall mounting, fixing, testing etc. complete as req. make: server rack/ netrack/ dynamic/ rittal or equivalent as approved by the engineer-in-charge, supply, installation, commissioning of online ups 1kva 24 volts inbuilt ovcd for 1-2 hrs. backup for nvr and cameras, monitor i/c wall mounting, fixing, testing etc. as required make: microte

corporations/Associations/Others

CTN :41208690

07 Aug, 2025 NA

Surat - Gujarat

Tender For item rate tender for repairing and renovation of carpentary works in sub zone-1 of south west (athwa) zone. - providing & fixing powder coated aluminium partly glazed and partly panelled partition using medium duty sections of hindalco, zindal, narmada, banco or equivalent approved make having section 63.50 mm x 38.10mm ( frame-.758 kg/rmt & middle section- 0.819 kg./rmt), galzing clip with 5 mm thick clear float glass of approved make including all other necessary fittings and fixtures. entire work will have to be made water proof using necessary rubber sectioned wherever required. gaps all round the frame to be filled with approved water proof sealent. bottom portion of doors both side to be covered with 12mm thick prelaminated particle board of approved make and quality and as per design., providing & fixing partly panel & partly glass powder coated aluminium doors with aluminium section of hindalco, jindal , narmada,banco or equivalent approved make having poder coated outer frame leg partition section of 63.50 mm x 38.10 mm having weight 1.158 kg. / r.m. shutter section having size 83.5 mm x 44.45mm ( top & bottom: 1.384 kg./rmt. and middle 1.139 kg./rmt.) door vertical 47.62mm x 44.45 mm ( vertical:0.881 kg./rmt. & top hing side:0.974 kg./mt.), glazing clip (jindal section no. 19370 wt. 0.109 kg./ mt.) with 5mm thick sheet glass in acid frogting and 12 mm thick prelaminated sheet of greenlam, panama or archid make as approved by engineer-incharge including fixing brass pivot, handle, lock etc. complete., providing & fixing window having extruded aluminium colour powder coated / colour anodize section frame main outer size 63.50 x 38.10 x 1.95 mm ( of jindal section no.: 4605,@ wt. 1.094kg/mt.) horizontal two track member size 61.85 mm x 31.75 mm x 1.20 mm (of jindal section no : 8687, @ wt. 0.695 kg/mt.) vertical member of size 61.85 mm x 31.75mm x 130mm ( of jindal section no : 8758 @ wt. of 0.659 kg/mt.) with sliding shutters of horizontal member size 40 mm x 18 mm x 1.29 mm ( of jindal section no.:8947, @ wt. of 0.456 kg/mt/section 8948, @ wt. of 0.457 kg/mt) with 5 mm thick transparent silicon sealant glass fixing to frame as per details etc., providing & fixing window having extruded aluminium colour anodize section frame main outer size 95 mm x 24 mm x 1.17 mm ( of jindal section no.: 2459,@ wt. of 0.738 kg/mt.) horizontal three track member size 92 mm x 31.75 mm x 1.30 mm (of jindal section no : 8688, @ wt. 1.07 kg/mt.), vertical member of size 92 mm x 31.75mm x 1.50mm ( of jindal section no : 8933 @ wt. 1.06 kg/mt.) with sliding shutters of horizontal member size 40 mm x 18 mm x 1.29 mm ( of jindal section no.:8949, @ wt. of 0.456 kg/mt/) with 5 mm thick transparent bronze colour tinted float glass with powder coated aluminium fittings & fixtures and transparent silicon sealant glass fixing to frame as per details etc., providing and fixing standared extruded of aluminium section of size 61 x 37.0 x0.90 mm (of jindal section no.14080, @ wt. 0.471 kg per mt) with colour powder coated alluminium frame for lovered glass ventilation with 4 mm thick figured glass as details etc. complete for ventilation., providing & fixing panels -12mm thick indian gypsum panels of saint gobin brand, screwed to g.i. gram at 200mm c/c, frame g.i. frame fabrication with 60 x 26 x 0.5mm perimeter channels as required, 155 x 5 x..55mm intermediate channel at 1220mm c/c, 25 x 10 x 0.55mm ceiling angle at 1220 mm c/c, securely fixed soflit hangers at 1220mm c/c, false ceiling angle shall not at more than 610 mm from adjan wall connecting clips, etc, as required complete as per manufacture specifactions, joints all joints of panels field and finished with indian gypsum, jointing compound, joining tapes, etc. complete including scaffolding as required complete in all respects by engineer in charge., supply & fixing of 16mm.th.armstrong classic lite square edge mineral fiber celling with 24mm grid(l

State Government

CTN :40985784

11 Aug, 2025 2.50 Crore

Mohali - Punjab

Tender For corrigendum : purchase of recovery and rejuvenation lab. - infrared sauna tower irradiance: 55-110 mw/cm2, providing therapeutic benefits rated power: 100-240v ac, 2 amp, 50-60hz, suitable for standard electrical outlets wattage: 350w, combining red light and near-infrared therapy wavelength: 650nm (red light) and 850nm (near-infrared), promoting healing and relaxation led arrays: 70 red light leds (650nm) and 70 near-infrared leds (850nm), ensuring optimal coverage variable optics: 7 60-degree optics for maximum impact and quicker results. emf emissions: no detectable emf emissions at 10-15cm, prioritizing user safety. infrared sauna units with below mentioned features to be preferred- heaters: full spectrum heaters (400w each) or carbon fiber heaters (up to 2160w total power) temperature control: digital temperature and time control for customizable sessions materials: canadian hemlock wood or western red cedar, known for durability and hypoallergenic properties additional features: bluetooth connectivity, chromotherapy lights, and built-in stereo speakers for an enhanced experience. energy efficiency: reduced electricity consumption for cost-effective use temperature range: operating temperatures between 115 f and 140 f for comfortable sessions safety features: person-specific designs and low emf emissions for safe use, cryotherapy chamberwhole body cryo therapy chamber that runs completely on electricity without need of liquidnitrogen low temperatures within the range: -130 to -140 degree celsius. multiple treatment options electric mechanical lift system ensures user s head is outside the chamber to prevent exposure to cryogenic temperatures. real-time skin temperature monitoring using ir tech sensors ensuring safe and controlledcooling. smart software that manages the treatment processes throughout each session. simple quick plug-and-play set up without requiring specialized ventilation. large uhd touchscreen for easy operation and control. at least 3 media monitors for displaying media content. hifi speakers for audio entertainment and ambient audio. work on normal indian 220v at 16a or less, whole-body pneumatic lymphatic drainage machine:key features- multi-chamber design: multiple chambers that inflate and deflate in sequence to mimic manual lymphatic drainage- adjustable pressure: adjustable pressure settings to accommodate different patient needs and comfort levels- programmable treatment: programmable treatment protocols for customized therapy sessions- user-friendly interface: intuitive interface for easy operation and programming- input voltage: ac110v/220v- power consumption: less than 400w- screen: 8-inch wide color touch screen- air pressure: 20-360 mmhg (max pressure 37.5kpa)- cooling device output temperature: 5 to -16 c- output vacuum pressure: 0-110kpa- default time: 0-60 minutes- fuse size: f3al250v- ambient temperature: 5 c to 42 c- number of air bags: 24 bags or 16 pairs atleast - treatment modes: 4 modes atleast - intensity levels: 3 levels- package size: 62x42x31cm approx - gross weight: 15 kg approxsafety features- automatic pressure adjustment: automatic pressure adjustment to prevent excessive pressure and ensure patient comfort- emergency stop: emergency stop feature to quickly deflate chambers in case of discomfort or distress- patient monitoring: optional patient monitoring capabilities to track vital signs and treatment responseadditional features- multiple treatment modes: multiple treatment modes for different conditions, such as lymphedema, edema, and post-surgical swelling- data logging: optional data logging capabilities to track treatment parameters and patient progress- portability: optional portable design for increased flexibility and convenience.certifications: ce or fda clearance, percussion massager (gun massager)key features- percussive action: a percussive action that provides rapid and repetitive strokes to muscles and tissues- adjustable speed: adjustable speed settings to cust

State Government

CTN :41068449

08 Aug, 2025 NA

Nagpur - Maharashtra

Tender For enquiry for work contract for dismantling segregation and lot preparation of unserviceable air conditioning and ventilation system as per schedule at phps totladoh

CTN :41026012

31 Jul, 2025 NA

Tirunelveli - Tamil Nadu

Tender For supply of procurement and installation of furniture and accessorices for visitor room and guard room - oversized sofas 3s , sofa 2s , armchair , side table , centre table , television cabinet , media console cabinet , acrylic information board , window blind , rack , mirror , led acrylic 3d board , wall mounted fan , high rpm air ventilation device , visitors chair , computer table with chairs , executive chair , office table with top , stainless steel chairs 3s , information led display , curtains , key box , accessories , almirah , work station , overhead storeage cabinet , office chair , l shape executive table , executive table

Aluminium Ventilator Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors