Tender For auction sale of others - scrap mixed heterogeneous scrap compromising a ferrous mix, wooden scrap (including ply and compreg sheet), sunmica, pvc sheets and bushes, plastic, rexine, fiber/frp, window glass, v belts, rubber scrap , cotton waste, paper cardboard, and paper cartons along side rust and dust. the lot includes parts from lhb and icf coaches.approximate weight composition: ferrous mix (10%), sinmica (10%), wooden scrap (12%), pvc sheet/rexine(15%),fibre/frp windows (5%), v belt(2%), rubber & plastic (5%). and rust / dust (41%) please note that the composition breakdoown is approximate and actual values may very exclusion(non-delivered items): non-ferrous materials (unless attached to scrap and weighing under 50 grams) wheels, tires, axles,rails,springs,and any individual ferrous scrap piece weiguhing over 40 kg. jcb loading is permitted. the mode of delivery is by weight. loading shall commence from the front side without any sorting of material. materials will be delivered consecutively. i.e, location 1 will be delivered first and so on. loading shall commence from the front side . total lot qty. - 250 mt, custodian - sse (scrap) bvp, location :- 1. bg ws near incinator area, 2. mg ws near battery section , as is where is basis, loading by purchaser. fdp 50 days
Tender For local market rate for construction items materials of labpur dev. block jurisdiction of fy-2026-27 (including all taxes). - laying and jointing pvc pipe. heading, welding by electric plant, hire charges for 5 hp with operator,fuel and shifting etc all charges complete, hire charges of shuttering plank (25mm-30mm thick) with prop including all fittings, hire charges of shuttering plank (25mm-30mm thick) without prop including all fittings, hire charges of shuttering plank (above 30mm-37mm thick) with prop including all fittings, hire charges of 5 kva generator, hire charges of 3 kva generator, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, vibrator (needle type 40 mm), surface vibrator, water tanker 5000 ltr. capacity, 1st class picked jhama bricks(traditional), 1st class traditional bricks (kiln burnt), modular fly ash bricks, fly ash bricks(traditional), coloured inter locking c.c. paver block, moorum, fine sand, medium sand, coarse sand, coarse sand, portland cement, white cement, water proofing materials, brick aggregate (single size):50 mm nominal size, brick aggregate (single size):40 mm nominal size, stone aggregate(single size):63 mm nominal size, stone aggregate(single size): 40 mm nominal size, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 06 mm nominal size, stone screening type a (13.2 mm), stone screening type b (11.2mm), stone boulder( 225 mm above ), stone boulder ( 225mm-150mm ), grade 1 stone metal 63 mm to 45 mm, polythene sheet (150 gm per sqm), thermocol 12.5 mm thick., udaypur marble slab ( for floor, lobby etc) 18 mm thick of size 0.3 sq m to 0.6 sq m, chawk dungri marble slab ( for floor, lobby etc) 18 mm thick of size 0.3 sq m to 0.6 sq m, udaypur marble slab ( for wall/dado) 18 mm thick of size 0.3 sq m to 0.6 sq m, chawk dungri marble slab ( for wall/dado) 18 mm thick of size 0.3 sq m to 0.6 sq m, 18 mm thick marble partition slab for urinals including fitting fixing (with chawk doongri marble), ceramic glazed tiles ist quality 300 x 300 mm in all shades and designs of white, ivory, grey, fume red brown etc., rectified - ceramic glazed tiles ist quality 300 x 300 mm or more in all shades designs white, ivory, grey, fume red brown etc, vitrified floor tile 60x60 cm, precast chequered cement tiles 22 mm thick dark shade using ordinary cement, bitumen vg-30, bitumen emulsion, coal tar, diesel oil, sal silliguri -in/c labour cost, sal malaysia-in/c labour cost, neem wood -in/c labour cost, other local wood -in/c labour cost, ordinary teak wood -in/c labour cost, sisu/gamar wood -in/c labour cost, local sal wood -in/c labour cost, bamboo (8cm-10cm dia) including fixing, eucalyptus bullah (7.5cm -10cm dia), eucalyptus bullah (12.5cm -15cm dia), eucalyptus bullah (17.5cm -20cm dia), sal bullah (7.5cm -10cm dia), sal bullah (12.5cm -15cm dia), sal bullah (17.5cm -20cm dia), malayasia sal cleat, wood dust, frp composite door frame 66mm x 70mm, frp composite door frame 66mm x 90mm, supplying solid flush type doors of commercial quality, 30 mm thick factory made glass fiber reinforced plastic panel door shutter i/c carriage, supplying,fitting & fixing of 2-track / 3-track aluminium sliding window, supplying, fitting & fixing of partly glazed partly paneled or fully glazed single leaf aluminium swing door, supplying, fitting & fixing of aluminium fixed partition wall of all aluminium sections, anodised aluminium hanging type door stopper, brass 150 mm floor door stopper (0.357 kg), chromium plated brass mortice latch and lock 100x65 mm with 6 levers and a pair of brass lever handles, ms integrated grill for steel window and ventillator, two point nose steel handle, openable steel windows as per is sizes with side hung shutters and horizotal glazing bars., top hung side hung ventillator, fixed type ventilators as per i.s. sizes with horizontal glazing bars h
Tender For supply of glass shutter assly. for lavatory window [frp] to drg. no. icf/sk-5-5-020,alt. d, item 1 to 9, conforming to rdso specification no. rdso/2007/cg-02 (rev. 01) with ame ndment no. 2 of august 2016. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]
Tender For supply of frp housing with hammer for breaking window glass in case of emergency to drg. no. icf/sk-4-3-082, col-i, alt.-d or latest. material and spec. as per drawing. [ warranty period: 30 months after thedate of delivery ] ]
Tender For supply of frp door window guide arrgt.with equalising device to drg. no.icf/sk-5-3-011, alt.no.-'e' and rdso's specn. no.rdso/2007/cg-03(rev.-i) of feb.2008 with 3 amendments-last amendmentslip no. 3 of february 2019 colour of the material - satin blue to colour shade to isc- 177 of is:- 5-2007. [ warranty period: 30 months after the date of delivery ] ]
Tender For auction sale of rolling stock - allocation no.21213304.on as is where is basis. iron and steel cut-up parts of condemned conventional coach body with available unserviceable electrical excluded fittings, bearing no. [1] er/062220, type-wgscn, make-beml. [2] er/062217, type-wgscn, make-beml. [3] er/062212, type-wgscn, make-beml. total qty.-03nos. location-c and w extension yard/kpa. to be sold with all available fittings but without excluded fittings. excluded fittings/items are electrical excluded fittings i.e. (01 no. alternator from each coach). mechanical excluded fittings (per coach) i.e. (02 nos of bogie/trolley complete with helical springs, 04 nos aluminium water tank, 01 no. distributor valve, 01 no. cr with common pipe bracket, 04 nos. brake cylinder, 04 nos. wearing piece, 04 nos. wheel sets with rb & a/box complete, axle pulley complete, 04 nos of bio tank are excluded from sale and will be returned to the custodian as per extent procedure. approx saleable weights of condemned conventional coaches are included with the un-serviceable items, ferrous-iron, non- ferrous/ other¿s items i.e. un-serviceable aluminiumwindow guide frame & aluminium checker plate-(nil for all coaches) un-serviceable aluminium cable - (approx 36.7 kg. for all coaches), s/s wash basin-(06 nos in approx. 12 kg. for all coaches), s/s floor-(approx. 768 kg. for all coaches), ss inlay-(approx 80 kg for all coaches), lp sheet, pvc sheet, compreg sheet, coir, rexin, frp moulding, glass, wood etc. approx weight of lp sheet, pvc sheet, compreg sheet, coir, rexin, frp moulding, glass, wood are approx. 2.165 mt for each coaches. condition- [1] after sale, coaches will be handed over to the purchaser for dismantling and cutting at c&w extension yard/kpa. [2] cutting and dismantling of coaches are to be made at c&w extension yard/kpa by purchasers own arrangement after ensuring sufficient safety measures against fire hazards. [3] the returnable items of above coaches will be returned to the respective shop of kanchrapara workshop at the purchasers own arrangement before completion of delivery.
Tender For auction sale of rolling stock - allocation no.21213304.on as is where is basis. iron and steel cut-up parts of condemned conventional coach body with available unserviceable electrical excluded fittings, bearing no. [1] er/012332, type-wgscn, make-rcf. [2] er/062252, type-wgscn, make-rcf. [3] er/064169, type-wgscn, make-rcf. [4] er/062213, type-wgscn, make-beml. total qty.-04nos. location-c and w extension yard/kpa. to be sold with all available fittings but without excluded fittings. excluded fittings/items are electrical excluded fittings i.e. (01 no. alternator from each coach except coach sl-4). mechanical excluded fittings (per coach) i.e. (02 nos of bogie/trolley complete with helical springs, 04 nos aluminium water tank, 01 no. distributor valve, 01 no. cr with common pipe bracket, 04 nos. brake cylinder, 04 nos. wearing piece, 04 nos. wheel sets with rb & a/box complete, axle pulley complete, 04 nos of bio tank are excluded from sale and will be returned to the custodian as per extent procedure. approx saleable weights of condemned conventional coaches are included with the un-serviceable items, ferrous-iron, non- ferrous/ other¿s items i.e. un-serviceable aluminiumwindow guide frame & aluminium checker plate-(nil for all coaches) un-serviceable aluminium cable -(approx 36.7 kg. for all coaches), s/s wash basin-(06 nos in approx. 12 kg. for all coaches), s/s floor-( approx. 768 kg. for all coaches), ss inlay-(approx 80 kg for all coaches), lp sheet, pvc sheet, compreg sheet, coir, rexin, frp moulding, glass, wood etc. approx weight of lp sheet, pvc sheet, compreg sheet, coir, rexin, frp moulding, glass, wood are approx. 2.165 mt for each coaches. condition- [1] after sale, coaches will be handed over to the purchaser for dismantling and cutting at c&w extension yard/kpa. [2] cutting and dismantling of coaches are to be made at c&w extension yard/kpa by purchasers own arrangement after ensuring sufficient safety measures against fire hazards. [3] the returnable items of above coaches will be returned to the respective shop of kanchrapara workshop at the purchasers own arrangement before completion of delivery.
Tender For auction sale of rolling stock - allocation no.21213304.on as is where is basis. iron and steel cut-up parts of condemned conventional coach body along with cond. bogies, bearing nos. [1] er/062611, type-wgscz, make-icf. [2] er/042267, type-wgscn, make-icf. [3] cr/064175, type-wgscn, make-beml. total qty.-03nos. location-c and w extension yard/kpa. to be sold along with 02 nos. of condemned bogies (per coach) with all available fittings including unserviceable helical springs but without excluded fittings. excluded fittings/items are 04 nos. of wheel sets (per coach) with its fittings, 04 nos. of aluminium water tank (per coach) and nonferrous attachment if any are excluded from sale and will be returned to the custodian as per extent procedure. approx. saleable weights of condemned conventional coaches are included with the un-serviceable items; ferrous-iron, n- ferrous/ other¿s items i.e. un-serviceable aluminiumwindow guide frame & aluminium checker plate-(nil. for all coaches), aluminium cable-(approx35.22kg. for coach sl-1 & 36.7 kg for sl-2&3), s/s wash basin-(06 nos in 12kg. approx. for all coaches), s/s floor-(nil for coach sl-1&2, approx 768kg for sl-3), s/s inlay-(approx 80kg. for all coaches), ss bio tank-( approx. 492 kg. for coach sl-1&3, nil for sl-2). lp sheet, pvc sheet, compreg sheet, coir, rexin, frp moulding, glass, wood etc. approx. weight of lp, pvc, compreg sheet, coir, rexin, frp moulding, glass, wood are 1.958 mt for sl-1, 2.165mt for coach sl-2&3. nb: 04 nos. step hanger i.e approx. 80 kg are deficient from coach sl-2. condition- [1] after sale, coaches will be handed over to the purchaser for dismantling and cutting at c&w extension yard/kpa. [2] cutting and dismantling of the above coaches are to be made at c&w extension yard/kpa by purchasers own arrangement after ensuring sufficient safety measures against fire hazards. [3] the returnable items of above coaches will be returned to the respective shops of kanchrapara workshop at the purchasers own arrangement before completion of delivery.
Tender For auction sale of rolling stock - allocation no.21213304.on as is where is basis. iron and steel cut-up parts of condemned conventional coach body along with cond. bogies, bearing nos. [1] er/062618, type-wgscz, make-icf. [2] er/062619, type-wgscz, make-rcf. total qty.-02nos. location-c and w extension yard/kpa. to be sold along with 02 nos. of condemned bogies (per coach) with all available fittings including unserviceable helical springs but without excluded fittings. excluded fittings/items are 04 nos. of wheel sets (per coach) with its fittings, 04 nos. of aluminium water tank (per coach) and nonferrous attachment if any are excluded from sale and will be returned to the custodian as per extent procedure. approx. saleable weights of condemned conventional coaches are included with the un-serviceable items; ferrous-iron, n- ferrous/ other¿s items i.e. un-serviceable aluminiumwindow guide frame & aluminium checker plate-(nil for all coaches), aluminium cable-(approx35.2kg. for each coach), s/s wash basin-(04 nos in 08kg. approx. for coach sl-1 & 01 no. in 02 kg. for sl-2 ), s/s floor-(approx 768kg for each coach), s/s inlay-(approx 80kg. for each coach). lp sheet, pvc sheet, compreg sheet, coir, rexin, frp moulding, glass, wood, unserviceable bogie fittings, helical springs etc. approx. weight of lp sheet, pvc sheet, compreg sheet, coir, rexin, frp moulding, glass, wood are 1.958 mt for each coach. nb: approx 42 kg. compreg sheet are deficient from each coach & 06 nos bs door i.e. spprox 420 kg, 203 kg approx. bottom plate are deficient from coach sl-2. condition- [1] after sale, coaches will be handed over to the purchaser for dismantling and cutting at c&w extension yard/kpa. [2] cutting and dismantling of the above coaches are to be made at c&w extension yard/kpa by purchasers own arrangement after ensuring sufficient safety measures against fire hazards. [3] the returnable items of above coaches will be returned to the respective shops of kanchrapara workshop at the purchasers own arrangement before completion of delivery.