Latest aluminum alloy plate Tenders | Government aluminum alloy plate Tenders

Central Government And Public Sector

CTN :45727605

28 Jul, 2026 NA

Bangalore - Karnataka

Tender For heavy duty circular magnet with following specification 1. application- circular lifting magnet suitable for lifting cold as well as hot ferrous material up to 600?c in a foundry environment 2. operating voltage-220vdc 3. cold current- max.105 amps 4. cold power- min. 18.5 kw 5. self weight- total self-weight of the magnet shall not exceed 5 tons, inclusive of suspension chain, master bail, lugs, pins, and all other accessories 6. duty cycle- min 50% at a 10-minute cycle 7. magnet diameter- 1650 mm with tolerance of -25.5 mm/+50 mm 8. minimum lifting capacities- the lifting capacities of the magnet shall not be less than the following: a) pig iron (1 hm)-2359 kg, b) pig iron (2 broken)-1225 to 1497 kg, c) steel turnings-771 kg 9. magnet conductor & insulation- magnet conductor shall be made of premium electrical-grade copper, minimum copper purity shall be 99.99%, coil insulation shall be class "h" 10. magnet body construction- the magnet shall be made of high-grade cast steel, of welded construction, and shall be waterproof and mechanically robust, suitable for heavy-duty foundry applications 11. bottom plate & sealing plate- a)heavy duty non-magnetic bottom plate and sealing plate shall be provided,b) material shall be wear-resistant, work-hardened manganese steel, c)plates shall protect the coil from damage due to impact, abrasion, and bumping 12. suspension chain assembly- a)heavy duty, annealed alloy steel, 3-legged chain shall be provided, b)chain shall be complete with a master bail suitable for crane hook suspension. heavy-duty lugs & pins shall be provided toconnect the chain to the magnet 14. surge protection? a suitably rated surge suppressor shall in the magnet circuit 15. testing & test certificates? all relevant tests and test certificates shall be submitted along with the supply. specn: 1. cold current: max 105amps, 2. cold power: 18.5 kw 3. self weight less than 5ton inclusive of chain, bail and other accessories. duty cycle: min. 50% at 10minutes cycle 5. diameter of magnet: 66inches -1 inch +3inch. 6. lifting capacities shall not be less than (a) pig iron1hm - 2359kgs) (b) 2 broken pieces: 1225 (c) steel turnings: 771kg ]

Central Government/Public Sector

CTN :44753589

30 Jun, 2026 NA

Haridwar - Uttarakhand

Tender For bid to ras bid to ras bid to ras bid to ras corrigendum : tender for supply of aluminium alloy d d -aluminium alloy plate n.std-astm b209 (m) size- 25.4 dim.- t grade- alloy 5083 (h-112) , aluminium alloy plate n.std-astm b209 (m) size- 28.75 dim.- t grade- alloy 5083 (h-112) , aluminium alloy plate (plate as per din 1725 & din 1745 also acceptable ) n.std-astm b 209 (m) size- 6.35x2000x6000mm dim.- txwxl grade- al-5083 h112 , aluminum alloy plate en aw 6082 t6 en 485-2 , thk-70 mm , requirements- material test certificate (mtc) as per en 485-2 standard - en 485 size- thk-70 mm , aluminium alloy round (material as per din 1725 and 1747 also acceptable) n.std-astm b 221(m) size- 125 grade- al 5083 h112 , aluminium alloy plate n.std-astm b 209 (m) size- t-2mm dim.- t grade- gr-al 5083 h 112 , aluminium alloy round (round as per din-1725 & din- 1747 also acceptable ) n.std-astm b 221 (m) size- d-400mm dim.- d grade- al- 5083 h112 , aluminium alloy plate n.std-astm b 209 (m) size- t-15 mm dim.- t grade- gr-al 5083 h112 , aluminium alloy plate n.std-astm b 209 (m) size- t-100 mm dim.- t grade- gr-al 5083 temper f , aluminium alloy tube (material as per din-1725 and 1746 also acceptable) n.std-astm b 221(m) size- 40x5 dim.- odxt grade- al 5083 h112 , aluminium alloy plate n.std-astm b209 (m) size- 9.50 dim.- t grade- alloy 5083 (h-112) , aluminium alloy plate n.std- astm b209 (m) size- 19.05 dim.- t grade- alloy 5083 (h-112) , aluminium alloy round (material as per din 1725 and 1747 also acceptable) n.std-astm b 221(m) size- 340 dim.- d grade- al 5083 h112 , aluminium alloy tube (material as per din-1725 and 1746 also acceptable) n.std-astm b 221(m) size- 330x27.5 dim.- odxt grade- al 5083 h112 , aluminium alloy round (material as per din 1725 and 1747 also acceptable) n.std-astm b 221(m) size- 150 dim.- d grade- al 5083 h112 , aluminium alloy plate n.std-astm b 209 (m) size- t-10 mm dim.- t grade- gr-al 5083 h 112

CTN :45696125

13 Jul, 2026 NA

Palacode - Tamil Nadu

Tender For supply of equipment for mechanical engineering department - supply of equipment for mechanical engineering department, lathe machine :specification :bed: 2v & 2 flat, induction hardened and ground minimum bed length: 1375 mm bed width: 240 mm capacity: height of centre: 165 mm swing over bed: 320 mm swing over gap: 510 mm swing over cross slide: 180 mm distance between centres: 650 mm slides: cross slide travel: 200 mm compound slide travel: 115 mm spindle: spindle bore: 40 mm spindle nose: thread type, 62 mm spindle taper: mt-3 tail stock: quill diameter: 38.1 mm taper: mt-3 travel: 120 mm speed: no. of speeds: minimum 8 range: (40 800 )rpm threading: metric: (1 6 )mm (min 13 steps) english: (2 24 )tpi (min 19 steps) lead screw: (1 4) tpi electrical: motor: 1.5 hp, 230v/415v, 50 hz drive: v-belt structure: bed: close-grained cast iron (fg 260) gears: hardened steel base: rigid cast iron stand , open cup apparatus :specification :standard compliance: astm d92 / is 1448 (part 69) test method: open cup flash and fire point determination test cup: brass, precision machined with heat resistant handle heater: electric heater (1000 w 10% nickel chromium) with variable control heating rate: 5 6 c per minute (as per standard) temperature range: -6 to 400 c thermometer: astm 11c or equivalent flame applicator: gas test flame with fine control valvebody: stainless steel housing display: analog / digital temperature indicator power supply: 230v ac, 50 hz safety: overheat protection heat insulation , closed cup apparatus :specification :standard compliance: astm d93 / is 1448 (part 21) test cup:brass cup diameter: 50.7 50.8 mm capacity: minimum 70 ml stirring system heater: electric heater 650 w 10% heating rate: 1 12 c/min adjustable ignition: pilot flame with automatic shutter mechanism temperature measurement: thermometer or digital sensor(ip-28c or astm) display: digital temperature display power supply: 230v ac, 50 hz safety:over-temperature cut-off flame safety control , tail stock assembly :specification :medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, slip gauge :specification :set size: m87 (87 pieces) or equivalent range: 1.001 mm to 100 mm step sizes: 0.001 mm 0.005 mm 0.01 mm material: high-grade alloy steel / tungsten carbide (preferred) hardness: hrc 63 65 accuracy: grade: grade 1 or grade 2 flatne flatness / parallelism: 0.5 m stored in protective wooden boxes to prevent wear; calibration grades include charts for exact sizes , dc motor:specification :type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 pole construction: laminated stator salient poles accessible armature features: cut section / open type suitable for dismantling and reassembly, hydraulic cylinder :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steel calibration grades include charts for exact sizes supply: mounted on training base suitable for dismantling and inspection , hydraulic operated directional control valves (dcv):specification :type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study , bearing with shaft assembly :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply:mounted on training base suitable for dismantling and inspection , coupling unit using driving and dr

CTN :45404122

19 Jun, 2026 NA

Palacode - Tamil Nadu

Tender For corrigendum : supply of equipment for mechanical engineering department - supply of equipment for mechanical engineering department, lathe machine :specification :bed: 2v & 2 flat, induction hardened and ground minimum bed length: 1375 mm bed width: 240 mm capacity: height of centre: 165 mm swing over bed: 320 mm swing over gap: 510 mm swing over cross slide: 180 mm distance between centres: 650 mm slides: cross slide travel: 200 mm compound slide travel: 115 mm spindle: spindle bore: 40 mm spindle nose: thread type, 62 mm spindle taper: mt-3 tail stock: quill diameter: 38.1 mm taper: mt-3 travel: 120 mm speed: no. of speeds: minimum 8 range: (40 800 )rpm threading: metric: (1 6 )mm (min 13 steps) english: (2 24 )tpi (min 19 steps) lead screw: (1 4) tpi electrical: motor: 1.5 hp, 230v/415v, 50 hz drive: v-belt structure: bed: close-grained cast iron (fg 260) gears: hardened steel base: rigid cast iron stand , open cup apparatus :specification :standard compliance: astm d92 / is 1448 (part 69) test method: open cup flash and fire point determination test cup: brass, precision machined with heat resistant handle heater: electric heater (1000 w 10% nickel chromium) with variable control heating rate: 5 6 c per minute (as per standard) temperature range: -6 to 400 c thermometer: astm 11c or equivalent flame applicator: gas test flame with fine control valvebody: stainless steel housing display: analog / digital temperature indicator power supply: 230v ac, 50 hz safety: overheat protection heat insulation , closed cup apparatus :specification :standard compliance: astm d93 / is 1448 (part 21) test cup:brass cup diameter: 50.7 50.8 mm capacity: minimum 70 ml stirring system heater: electric heater 650 w 10% heating rate: 1 12 c/min adjustable ignition: pilot flame with automatic shutter mechanism temperature measurement: thermometer or digital sensor(ip-28c or astm) display: digital temperature display power supply: 230v ac, 50 hz safety:over-temperature cut-off flame safety control , tail stock assembly :specification :medium-duty tailstock assembly for dismantling & assembly quill stroke: minimum 75 mm taper: mt-3 (preferred standard) feed: hand wheel operated features: set-over screws for taper turning spindle locking arrangement body: cast iron (fg 260) spindle: hardened steel, slip gauge :specification :set size: m87 (87 pieces) or equivalent range: 1.001 mm to 100 mm step sizes: 0.001 mm 0.005 mm 0.01 mm material: high-grade alloy steel / tungsten carbide (preferred) hardness: hrc 63 65 accuracy: grade: grade 1 or grade 2 flatne flatness / parallelism: 0.5 m stored in protective wooden boxes to prevent wear; calibration grades include charts for exact sizes , dc motor:specification :type: dc shunt motor (dismantling model) power: minimum 0.5 hp voltage: 220 v dc speed: 1500 rpm poles: 4 pole construction: laminated stator salient poles accessible armature features: cut section / open type suitable for dismantling and reassembly, hydraulic cylinder :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steel calibration grades include charts for exact sizes supply: mounted on training base suitable for dismantling and inspection , hydraulic operated directional control valves (dcv):specification :type: manual spool type dc valve configuration: 4/2 way size: ng06 (cetop 3) rated pressure: 210 bar flow capacity: 20 40 lpm body: hardened steel / cast steel spool: ground and hardened ports: clearly marked (p, a, b, t) supply: mounted on training plate suitable for dismantling and study , bearing with shaft assembly :specification :bore diameter: 50 mm stroke length: 250 mm working pressure: 160 bar cylinder tube: honed steel piston rod: hard chrome plated seals: standard industrial seals end caps: steelsupply:mounted on training base suitable for dismantling and inspection , coupling unit using

Central Government/Public Sector

CTN :45370605

09 Jun, 2026 NA

Multi City - Multi State

Tender For supply of (dfpw12301183) aluminum alloy plate en aw 6082 t6 en 485-2, thk= 30 mm , (dfpw12301191) aluminum alloy plate en aw 6082 t6 en 485-2, thk= 42 mm,

Central Government And Public Sector

CTN :45117688

19 May, 2026 NA

Bangalore - Karnataka

Tender For supply of set of high wear-resistant, easily weldable and bendable wear plates made of hardox 400 or hardox 450 of ssab make / rockhard 400 or rockhard 450 of jindal steel ltd make / rockstar 400 or rockstar 450 of am and ns india make, having hardness 370 to 430 bhn (approx. 38 to 45 hrc), suitable for use as wear pieces in chip conveyor trough assemblies. one set consists of: (1) 6 mm x 50 mm x 2000 mm plate = 200 nos. (2) 12 mm x 100 mm x 2000 mm plate = 32 nos. (3) 16 mm x 100 mm x 2000 mm plate = 24 nos. 1) eligibility: only original manufacturers or their authorized distributors/dealers shall be permitted to participate in the tender process. authorization certificate from the oem shall be submittedalong with the offer. 2) material specification: the plates shall be made of high abrasion resistant steel, capable of withstanding continuous sliding and rolling wear caused by conveyor chain rollers and metal chipsin chip conveyor trough assemblies. 3) weldability and fabrication: the plates shall be suitable for conventional welding methods, including: (a) manual metal annual rate contract welding (mmaw) (b) submerged annual rate contract welding (saw) (c) compatible with standard thermal cutting processes. 4) quality certification: material shall be supplied with mill test certificate (mtc) as per en 10204 type 3.1, confirming: (a) heat number (b) chemical composition (c) hardness (d) mechanical properties. 5) brand marking: plates shall carry manufacturer identification / grade marking wherever applicable accepted makes: (1) hardox 400 / hardox 450 - ssab. (2) rockhard 400 / rockhard 450 - jindal steel ltd. (3) rockstar 400 / rockstar 450 - am and ns india only. [ warranty period: 18 months after the date of delivery ]

Central Government/Public Sector

CTN :44821610

05 May, 2026 NA

Haridwar - Uttarakhand

Tender For bid to ras bid to ras supply of aluminum alloy plate en aw 6082 t6 en 485-2, thk= 30 mm

CTN :44842024

23 Apr, 2026 NA

Saran - Bihar

Tender For corrigendum : supply of wear plate for peening/ cleaning machine part no.-6-720214-1 as per drawing no. 723390110110 alt.2 material : abrasion resistant iron casting to is : 4771 type - ii make : samir industries or equivalent note : 1) attached drawing is only for general guidance . firm should visit rwp/bela.plant for exact shape, size and dimension before bulk supply of material. [ warranty period: 12 months after the date of delivery ]