Latest aluminum alloy Tenders | Government aluminum alloy Tenders

Central Government/Public Sector

CTN :45683013

07 Jul, 2026 NA

Haridwar - Uttarakhand

Tender For corrigendum : supply of nylon rope ladder complete with 1" dia. aluminum steps as per design. nylon rope of 25 mm dia. with steps of 25 mm dia. aluminum alloy corrugated tubing spaced at 12 c/c duly packed on both sides size 20 feet long with hook for hanging. specification as per attached annexure "a". [ warrantyperiod: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45714895

18 Jul, 2026 NA

Pune - Maharashtra

Tender For special repairs to lt panels and connected items at pyro, pinaka, nag mixture building, magazine area and ap building in hemrl, pune - taking out old serviceable/unserviceable lt panel/capacitor panel of any description or capacity keeping aside in safe custody for schedule of credit complete all as specified and directed, supply, fixing and commissioning of cpri approved factory made lt cubicle panel board outdoor type conforming to is/iec-61439-1&2 : 2011 with canopy, louvers & shutters made out of 3.15 mm thick crca sheet totally enclosed with necessary ventilations, weather, dust and vermin proof with front and rear opeing and lcoking arrangement, degree of protection ip 56, 415 volts, 3 phase, 4 wire, 50 hz having aluminium bus bar of capacity 1200 amps tpn duly colour coded and for neutral supported with dmc/smc insulator colour coded with heat shrinkable sleeve having short circuit current with minimum 65 ka for one second and suitable for internal connection including instantaneous over load and earth fault relays complete with digial type voltmeter and ammeter inclduing suitable range of cts of metering, selector switches for voltmeter and ammeter, set of three led type indicating lamps duly wired with suitable size of copper cables and panel board shall be grouted in the ground with suitable size of foundation in pcc 1:2:4 type b1, ms channels 50 x50 x 6mm with nut bolts, wahsers, etc. suitable for fixing with bus duct including comprising of the following:-incoming: (a) acb adjustable type with thermal magnetic release 4 pole, 800a, 415v, 50 ka, 50 hz - 01 no. outgoing: (b) mccb 4p, 400 amps, 36 ka,415v, ac supply including extended rotary handle and spreader terminals fo incoming and outgoing - 03 nos, (c) mccb 4p, 125 amps, 25 ka,415v, ac supply including extended rotary handle and spreader terminals fo incoming and outgoing - 01 nos, (d) panel mounted type digital multifunctional energy meter a, v,z, kw, pf t operated, lt 3 phase, 4 wire inclding ct ratio 200/5 - 04 nos, (e) control mcb c curve, sp, 6 to 32a, 10ka, c curve - 02 nos, (f) led phase indicator (r,y & b) - 01 set. (pyro sub stn), supply, fixing and commissioning of cpri approved factory made lt cubicle panel board outdoor type conforming to is/iec-61439-1&2 : 2011 with canopy, louvers & shutters made out of 3.15 mm thick crca sheet totally enclosed with necessary ventilations, weather, dust and vermin proof with front and rear opeing and lcoking arrangement, degree of protection ip 56, 415 volts, 3 phase, 4 wire, 50 hz having aluminium bus bar of capacity 1200 amps tpn duly colour coded and for neutral supported with dmc/smc insulator colour coded with heat shrinkable sleeve having short circuit current with minimum 65 ka for one second and suitable for internal connection including instantaneous over load and earth fault relays complete with digial type voltmeter and ammeter inclduing suitable range of cts of metering, selector switches for voltmeter and ammeter, set of three led type indicating lamps duly wired with suitable size of copper cables and panel board shall be grouted in the ground with suitable size of foundation in pcc 1:2:4 type b1, ms channels 50 x50 x 6mm with nut bolts, wahsers, etc. suitable for fixing with bus duct including comprising of the following:-incoming: (a) acb adjustable type with thermal magnetic release 4 pole, 800a, 415v, 50 ka, 50 hz - 01 no. outgoing: (b) mccb 4p, 400 amps, 36 ka,415v, ac supply including extended rotary handle and spreader terminals fo incoming and outgoing - 01 nos, (c) mccb 4p, 315 amps, 25 ka,415v, ac supply including extended rotary handle and spreader terminals fo incoming and outgoing - 01 nos, (d) mccb 4p, 250 amps, 25 ka,415v, ac supply including extended rotary handle and spreader terminals fo incoming and outgoing - 02 nos (e) panel mounted type digital multifunctional energy meter a, v,z, kw, pf t operated, lt 3 phase, 4 wire inclding ct ratio 800/5 - 04 nos, (e) con

CTN :45387957

04 Jul, 2026 NA

Tarapur - Maharashtra

Tender For corrigendum : supply of inlet louvers size 930 mm frp 6 mm thick , fan assembly with hub aluminum alloy , main header pipe size 8 inch hdge , branch pipe size 3 inch hdge

CTN :45726916

07 Jul, 2026 1.50 Lacs

Multi City - Karnataka

Tender For corrigendum : advanced chrome-free acid anodization for corrosion protection of aircraft-grade aluminum alloys

CTN :45438320

06 Jul, 2026 45.00 Lacs

Ranga Reddy-T - Telangana

Tender For corrigendum : supply of providing and laying of painting works , patch works , waterproofing works , dismantling false ceiling , dismantling bison board , dismantling woden partistion , window closing , dismantling existing washbasin , cleaning , room 3 , providing toilets , toilet renovation works , roofing and false celing works , room 9 , floor patch works , dismantling of toilets , dismantling damaged windows , room 14 15 , dismantling existing doors , repairs to existing ventilator windows , dismantling existing wall and floor tiles , structural repair and opening modification works , dismantling brick structure and floor repair , dismantling and vegetation removal , dismantling existing broken and damaged glass panes , cpvc water supply line , site clearance and general demolition works , anti termite treatment , rodent and pest control treatment , overhead water tank cleaning repair and disinfection , storm water drain and surface drainage , signage and room identification , comprehensive checking of 1 nos 250 kva outdoor type substations including inspection , aluminium paint , servicing of existing 11 kv 400 amps 3 pole gang operated type air break ab switch , supplying and replacing damaged or worn out copper metal , supplying and replacing damaged or defective 11 kv post top insulators , supplying and replacing damaged or defective 11 kv pin type insulators , servicing of earth pits , supply installation testing and commissioning lbs , xlpe insulated aluminium conductor armoured ht cable , providing indoor or outdoor type heat shrinkable , supplying and laying of 3.5 core x 240 sq.mm 1.1 kv grade aluminium conductor xlpe insulated , supplying and making end termination for 3.5 core x 240 sq.mm 1.1 kv grade , joint for existing single run lt power cable of size 3.5 core x 240 sq.mm , comprehensive servicing and preventive maintenance of existing ht transformer , supply, fixing, installation, testing and commissioning of lightning arrester , providing and fixing cable identification tags , supply, installation, testing and commissioning sitc main mv panel , supply, installation, testing and commissioning sitc cubicle pdb panel , supply, installation, testing and commissioning sitc feeder pillar box , providing and installation of maintenance free earthing station , supplying and laying of 3.5 core x 120 sq.mm 1.1 kv grade aluminium conductor xlpe insulated , providing laying and fixing of overhead perforated or slotted ms cable tray , supply installation testing and commissioning 7 segment distribution board , providing fabricating supplying, installing testing and commissioning of electrical socket box

Central Government/Public Sector

CTN :45717363

09 Jul, 2026 NA

Chennai - Tamil Nadu

Tender For supply of light weight robust (housing should be made of aluminum alloy) torque wrench with range from 600 nm -1500 nm with scale division of 25 nm with 1 inch square drive as per the specification attached. acceptable makes: gedore / sturtevant richmont /stahlwille only [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45365796

04 Jul, 2026 11.50 Lacs

Jammu - Jammu And Kashmir

Tender For corrigendum : repair resurfacing of certain roads and connected items at bd bari mil stn - m&l preparing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with wire brush/brooms and finally fanning the cleaned surface with gunny bags or by mechanical blower to remove all loose dirt etc to black top surfaces, and applying evenly a priming/tack (viscosity grade paving bitumen of grade vg-10) @ 5 kg per 10 sqm to road surface bituminous asphaltic semi dense concrete consolidated thickness 30 mm with stone chippings graded aggregate with 5.5% of binder content by weight of total mix, (viscosity grade paving bitumen of grade vg-30) and 4% stone dust conforming to required specification for filler as per irc-95, 1987 (filler) by weight of mix, prepared in hot mix plant, rolled and compacted to required camber and gradient to uniform smooth surfaces by mechanical paver and rolled with 8 to 10 tone power roller completed all as specified and as directed., m&l for repair to potholes, any depth ,not exceeding 1 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, path etc, cutting around edges to at least 25mm in depth, making good by filling in screened and graded road metal, watering and well ramming, applying tack coat with (viscosity grade paving bitumen of grade vg-10) @ 10.0 kg per 10 sqm of surface putting in & including premixed bituminous macadam, well rammed and sealed with binder 9.80 kg/sqm, blinded with 0.09 cum of stone chippings, 6.3mm size and again well rammed, rolled and compacted to required camber and gradient to uniform smooth surfaces by mechanical paver and using with 8 to 12 tonne power roller (including supply of premixed macadam, binder and chippings),completed all as specified and as directed., premix bituminous macadam laid / rolled and compacted using 8 to 12 tonne power roller to required gradient and camber, with broken stone graded aggregate with 4% of paving bitumen binder of viscosity grade vg-30 grade by weight of toal mix (consolidated thickness 75mm or less) completed all as specified and as directed., m&l providing and laying at or near ground level factory made kerb stone of m-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required completed all as specified and as directed., m&l for marking lines 2.5 mm thick, dashes arrows etc of any description n. exc 10cm width/girth on road surface using hot applied thermo plastic road marking paint of approved colour confirming to bs-3262-1989 with special applicator machine all as per manufacturere instruction completed all as specified and as directed., supply and fix solar cat eye (green/red) aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency mono rystafie solar panel 2.4v/ 0.3 watt one ni-ed rechargeable battery (1.2v/ 1600ma) consisting of super bright led with 10,000 to 18,000 mcd completed as per manufactures instructions etc completed all as specified and as directed., supply and fixing metal tubular dealineator made out of abs round body fitted with 2 nos 65 mm dia highly reflective reflectors made out of and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in pcc 1:2:4 (150x150x300mm) type b1 complete all as specified and directed, s&f manufacturing, supplying and fixing retro reflective mandatory/ regulatory sign boards of 900 mm diametre with support length of 3750 mm and made up of 2 mm thick aluminium sheet, face to be fu

Central Government/Public Sector

CTN :44753589

30 Jun, 2026 NA

Haridwar - Uttarakhand

Tender For bid to ras bid to ras bid to ras bid to ras corrigendum : tender for supply of aluminium alloy d d -aluminium alloy plate n.std-astm b209 (m) size- 25.4 dim.- t grade- alloy 5083 (h-112) , aluminium alloy plate n.std-astm b209 (m) size- 28.75 dim.- t grade- alloy 5083 (h-112) , aluminium alloy plate (plate as per din 1725 & din 1745 also acceptable ) n.std-astm b 209 (m) size- 6.35x2000x6000mm dim.- txwxl grade- al-5083 h112 , aluminum alloy plate en aw 6082 t6 en 485-2 , thk-70 mm , requirements- material test certificate (mtc) as per en 485-2 standard - en 485 size- thk-70 mm , aluminium alloy round (material as per din 1725 and 1747 also acceptable) n.std-astm b 221(m) size- 125 grade- al 5083 h112 , aluminium alloy plate n.std-astm b 209 (m) size- t-2mm dim.- t grade- gr-al 5083 h 112 , aluminium alloy round (round as per din-1725 & din- 1747 also acceptable ) n.std-astm b 221 (m) size- d-400mm dim.- d grade- al- 5083 h112 , aluminium alloy plate n.std-astm b 209 (m) size- t-15 mm dim.- t grade- gr-al 5083 h112 , aluminium alloy plate n.std-astm b 209 (m) size- t-100 mm dim.- t grade- gr-al 5083 temper f , aluminium alloy tube (material as per din-1725 and 1746 also acceptable) n.std-astm b 221(m) size- 40x5 dim.- odxt grade- al 5083 h112 , aluminium alloy plate n.std-astm b209 (m) size- 9.50 dim.- t grade- alloy 5083 (h-112) , aluminium alloy plate n.std- astm b209 (m) size- 19.05 dim.- t grade- alloy 5083 (h-112) , aluminium alloy round (material as per din 1725 and 1747 also acceptable) n.std-astm b 221(m) size- 340 dim.- d grade- al 5083 h112 , aluminium alloy tube (material as per din-1725 and 1746 also acceptable) n.std-astm b 221(m) size- 330x27.5 dim.- odxt grade- al 5083 h112 , aluminium alloy round (material as per din 1725 and 1747 also acceptable) n.std-astm b 221(m) size- 150 dim.- d grade- al 5083 h112 , aluminium alloy plate n.std-astm b 209 (m) size- t-10 mm dim.- t grade- gr-al 5083 h 112

CTN :45715081

06 Jul, 2026 NA

Multi City - Multi State

Tender For supply of caution board with fittings, for running staff for panto raise as per rdso drg. no. eti/ohe/p/7582 ,rev-a and panto lower as per rdso drg. no. eti/ohe/p/7581, rev-a or latest (drawings shall be only for the ref. of dimensions of letter, symbols, holes and sheets) and as per rdso spec. no. eti/ohe/33a (12/97), rev-8 (11/2012)or latest. the material for base plate should be aluminum alloy sheet shall be of 2.0mm thickness (is 737-1986) as mentioned in specification. material for numerals/symbols/letter ( letter should be bi-lingual in hindi and english both) should be made of retro-reflective high intensity micro prismatic sheeting (type-iv) [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45681485

03 Jul, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For supply of a shaped ladder-main extrusion made up of aluminum alloy 'c' section 66 x 32 x 3.18mm thickness of he 30 gradet6 temper. step made up of 26mm x 3 mm thickness non slip, extra grip round corrugated fluted pipe steps. high quality leg grip rubber shoes for top and bottom. maximum working load: 90 kgs height - 6 feet available type: skid proof fluted mullion skid proof round rungs. make: sumer, nexus [ warranty period: 30 months after the date of delivery ] ]

Aluminum Alloy Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector