Tender For corrigendum : repair / replacement and maint of lt external electric supply works and other connected items at east & west wing in tech area under ge (af) tech area gwalior - s&f in repair mccb, 4 pole, 630 amps current rating and ultimate breaking capacity ics=icu =100% 36 ka with adjustable overload setting and having thermal magnetic release and to be fixed in distribution board, complete all as specified and directed., all as per item here-in-before but mccb, 4 pole, 400 amps current rating and ultimate breaking capacity 36 ka. ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 315 amps current rating and ultimate breaking capacity 36 ka. ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 250 amps current rating and ultimate breaking capacity 36 ka. ics = 100% of icu, all as per item here-in-before but mccb, 4 pole, 160 amps current rating and ultimate breaking capacity 36 ka . ics = 100 % of icu, all as per item hereinafter but mccb, 4 pole, 125 amps current rating and ultimate breaking capacity .16 ka . ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 100 amps current rating and ultimate breaking capacity. 16 ka. ics = 100 % of icu, all as per item here-in-before but mccb, 4 pole, 63 amps current rating and ultimate breaking capacity .16 ka . ics = 100 % of icu, m&l for earthing complete with galvanised steel plate electrode 600x600x6mm thick buried directly in ground (top edge of the plate should not be less than 1.50mtrs below ground level) connected to gi strip 25 4mm by means of bolts, nuts check nuts and washers of galvanised iron or steel connected to earthing test point all as specified incl 20 mm gi tubing medium grade and necessary fitting for protection of gi strip incl laying of charcoal dust and common salt in alternate layers of 150mm th, pcc chamber using pcc(1:3:6) type c-1 using 20mm graded stone aggregate, rcc cover 40mm thick (1:2:4) type b-0 using 12.5mm graded stone aggregate reinforced with 6mm dia round bar @ 75mm c/c both ways with ms handle 8mm dia, plastering 15mm thick cm (1:6) externally up to 150mm below ground level, gi funnel with 20mm dia medium grade gi pipe for watering and wire mesh incl excavation and earth work and disposal of surplus soil complete all as specified and shown on electrical plate no.3 of ssr part-i (2009) and connected to earth test point incl testing and marking bldg nos and writing test results (in white) on a black painted m.s. plate (size 300x300x3mm th) duly welded with angle iron of size 40x40x5mm, 60cm long, fixed with the earth pit chamber by grouting complete all as specified and directed.note :- (i) gi strip 25 4mm and gi pipe medium grade, up to 7.5mtr shall be deemed to be included in the rates quoted for earthing.(ii) excavation and earth work in any type of soil strata shall be deemed to be included in rates quoted for earthing. (iii) the rates quoted by the contractor are deemed to be included for pcc chamber and pcc cover as per ssr part-1.-, m&l for preparation of old painted surfaces of lt steel tubular pole/strut, of any description and in any position 9.00/8.50 mtr height and scrapping of pole with emery paper and applying one coat of aluminium paint on all the metallic surfaces including protection pipe, cross arms, clamps, gi pipe bracket of street/security light, anti climbing devices etc and providing three nos radium band strips complete all as specified and directed., supplying ,laying, jointing and testing xlpe insulated, armoured, heavy duty, aluminumconductorcable 1100 volts grade ,laid in trenches/ducts, floors, fixed to walls etc. complete all as specified and directed for the following sizes.note: the cost of taking down of lt ug cable is deemed to be included in the quoted rate, 35 sqmm 3 core, 50 sqmm 3 core, 70 sqmm 3 core, 185 sqmm 3 core, 240 sqmm 3 core, excavation in trenches n exc 1.5 mtr wide and n exc 1.5 mtr depth for foundation and laying of cable and get
Tender For auction sale of scrap from works / products pvc scrap,scrap insulator from enabling works medium in size guy insulators for 11 kv,scrap small tools hdpe,scrap 11 kv disc fitting for disc insulators,scrap miscellaneous gi from enabling works old scrap junction box,scrap electrical item lightning arrester,scrap structural steel gi,scrap miscellaneous gi from works / products gi wire,scrap small tools gi from demolitions / dismantling / testing dead end clamp,scrap electrical cable moc aluminium from works / products,scrap small tools gi from demolitions / dismantling / testing suspension clamp,scrap electrical fitting from works / products medium in size,scrap from works / products 3c x 120 sq mm ug cable jointing kit,scrap from works / products cable end cap(3000sqm),scrap structural steel ms from works / products used bolts & nuts,scrap electrical cable aluminium from enabling works,scrap electrical cable aluminium from works / products aluminium armoured cable,scrap lt abc cable3cx701cx70 16sqmm,scrap pipe gi from demolitions / dismantling / testing medium in size,scrap insulator insulator broken
Tender For supply of weather proof unarmoured pvc insulated, pvc sheathed aluminumconductorcable twin core, 6 sq. mm, solid conductor, working voltage up to and including 1100 volt conforming to ls: 694:2010 with amendment no.1/2012. technical parameters: 1. type of cable: weather proof unarmoured pvc insulated, pvc sheathed. 2. type of conductor: aluminumconductor, single, circular conforming to ls: 8310:1984: reaffirmed 2001. 3. cable size in square mm: 6 sq.mm 4.no of core : twin core 5.lsl marked: yes 6. availability of type test report from central govt / nabl approved / ilac accredited lab to prove conformity to the specification 7. governing specification: ls: 694:2010 with amendment no.1/2012. [ warranty period: 30 months after the date of delivery ] ]
Tender For rewari town annual maintenance works for water supply - supplying and installing of cable joint box complete in all respect. /cable joint box / supplying and making cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for 95 sq. mm of 3 core, xlpe aluminumconductorcable of main 11 kv for go switch to transformer. 1 no. indoor of ht meter and 1 no. of outdoor type at go switch. total 2 nos. at lisana
Tender For supply and installation work of brackets, clamps (patti), bolts, nuts, 1.5 mm wire, and 25 mm lt aluminumconductorcable for installing road lights (led) as per requirement at various locations within the municipal area
Tender For corrigendum : supply of a portable shelter , arrangement for transportation , steel structur , electricla items , external elect store , furniture items - shs 100 x 100x 4.0 mm thick. make: sail /tata / apollo / equivalent isi marked, shs 50 x 50x 2.00 mm thick. make: sail /tata / apollo / equivalent isi marked, rhs 100 x 50x 4.05 mm thick. make: sail /tata / apollo / equivalent isi marked, ms plate 20 swg /1 mm thick as in wall (outer body), ms plate 18 swg /1.22 mm thick as in roof (outer body), ms plate 26 swg /0.46 mm thick as in secondary outer body., 4 mm thick acp sheet (inner) (make alstone/eurobond/ aludecor/ alstrong), hybrid (poly-isocyanate) pir panel insulation shall be provided using 45 mm thick density of 48 kg/m³ with aluminum foil one side, hdf laminated wooden flooring 8 mm thick (make - action tesla/centurry/pergo/greenpanel/micasa), 19mm thick ply make: kitply / green ply / century ply, steel doors: one number of door of size 900mm x 1800mm with inside opening shall be provided with complete accessories., steel doors: one number of door of size 900mm x 2100mm with inside opening shall be provided with complete accessories., detachable ms steps: 1x ms steps of size 600 x 300 mm 6 tier of steps made up of ms angle of size 40mm x 40mm x4mm (wt not less than 4.20 kg/m) would be provided. reference drawing as directed and approved make: sail/tata/jindal, pop rivet 3m x ½”, pop rivet 4m x ½”, welding rod n. 10, primer paint, ir absorbent paint camouflage pattern, metal putty, rubber solution, hydraulic jack with rubber hoses and fittings, electrically operated winch assy, jack side support 2 ton, map boards 6' x 6' with all accessories, vps / projector system stand, canvas cover 30'x30', 3 kg fire extinguisher & fire ball, self screw 25x1, multi spectral camoflauge net, led concealed light 9’’ x 9”x 22 watt, make- havells/ bajaj/ crompton), entrance light (bucket light), ac starter with fittings and mcb, single core wire 2.5mm, single core wire 1.5mm, single core wire 1 mm, insulation tape, modular s/w with cover on/off 5/15, socket 5 amps 3 pin, socket 15 amps 3 pin, switch boards 10 “ x 10”, switch boards 6” x 6” & 6” x 3”, exhaust fan 300mm, work station/ partition, wall mounted fan 450mm, focus / spot light for mapboards, hdmi cable for projector, led screen (sonic view / equivalent) 65'" (164 cm) with modular stand 4k ultra hd (3840 x 2160) etc. make - samsung / sony, de-humidifier 1.5 ton with stablizer and complete fittings etc. make- voltas/ daikin/lg/blue star/ panasonic., electric connections. cables to be used should isi marked of make havells/ crompton greeves/ plaza , fire retardant material. 1.5 sqmm cable to be used in all light points and 2.5 sqmm cable to be used in power points. 18 watt & 11 watt leds of make: cromptongreaves/bajaj/havells/syska . shall be provided at all light points. all switches to be used should be of 6 amp modular type of havells/anchor /crompton greeves/ general electric. the fwg electric connections shall be provided for :-, (ii) power point of 5 pin15 amp socket and 8 nos switch combination of modular type all switch point will be modular type will be provided as approved of make crompton greave/bajaj/havells ., (iii) concealed conduits will be provided for cabling in the portable shelter set of pvc insulated cable 1.5/2.5 sqmm multistanded copper conductor single core 1100v, grade conforming to is 649/1990 of make havells/finolex/plaza, (iv) mcb dp 32amps conforming to is 8828-1996 make crompton greave/ bajaj/havells, (v) miniature circuit breaker (mcb) 6 amp to 32 amps (single pole) make : crompton reave/bajaj/havells., (vi) change over over 63 amps, 3 pole of make: crompton greave/bajaj/havells., cable jointing kit for 11kv (earthed) grade cable for straight through heat shrinkage type joint complete with jointing material and accessories suitable for 3 core xlpe armoured aluminumconductorcable of size 16 sqmm to 35 sqmm, power backup (ups/ inverter syst
Tender For stage contract for supply of workshop/line material as and when required during financial year 2026-27 or till next contract gets finalised - electrical store/workshop items/: as per is standards and kpdcl approved vendors only wherever applicable, bush rods 12mm(lt) of standard make, bush rods 19mm(lt) of standard make, bush rods 25mm(lt) of standard make, bush rods 30mm(lt) of standard make, ht bush for dts of standard make(33/11kv as per requirement and relevant is), lt bush set for 250kva dt of standard make, lt bush set for 63kva dt of standard make, lt bush set for 100kva of standard make, aluminum thimbles 95sqmm of standard make, aluminum thimbles 120sqmm of standard make, aluminum thimbles 185sqmm of standard make, aluminum thimbles 240sqmm of standard make, aluminum thimbles 300sqmm of standard make, soldress clamp for 630kva, soldress clamp for 400kva of standard make, soldress clamp for 250kva of standard make, soldress clamp for 100kva & 63kva, gi channel/angle/flat/clamps of sizes (as per requirement), gi v cross-arm with top bracket including clamp(2 nos), 11 kv gapless surge arrestor,9 kv ,10 ka ,la with polymer housing, stn. type, 11kv go, ab switch 3-phase, 3-pole, 200 amp, vertical type, 11 kv horn gap fuse set 3 phase 200a, 11 kv heavy duty link set (polymer) line type with 6mm copper blade and 02 no. 8ft. gi channel, clamps and nuts and bolts, 11 kv pin insulators (polymer/porcelain) with pins(5kn), 11kv polymeric composite disc insulator 12kv,min failing load 45kn, lighting impulse 75kv positive and 80kv negative, creepage distance 320mm, lt shackle with mukhi clamps including gi nuts & bolts, gi nuts & bolts of sizes with full thread, manilla rope, gi wire 8 swg, suspension/tension clamp with eye hook as per kpdcl standards, insulating piercing connector (10-95sqmm), straight through cable jointing kit for 35/50sqmm ltab, straight through cable jointing kit for 75/95/120sqmm ltab, heat shrinkable outdoor cable termination kit, 50sqmm lt ab cable (3x50+1x16+1x35) sqmm xlpe (1.1kv, 3+1c, al), 35 mm ab (ht) cable (3x35+1x35 mm ) xlpe, dpc aluminium of sizes 13/14/16/18swg of standard make, super enamelled(se) of sizes 13/14/16/18/21swg of standard make, lathoride paper 10 mil of standard make, exchange of 1kg fresh al dpc by scrap dpc, exchanege of 1 kg fresh bush rods by scrap bush rods, lathoride paper 20 mil of standard make, ht paper 3 mil of standard make, hard card board 1/1.5/2/3mm of standard make, fiber tubes of standard make, cotton tape/ nawar of standard make, cork washers (32x12)5mm, cork washers (50x28)5mm, cork washers (110x74)5mm, cork washers (45x20)5mm, cork washers (60x32)5mm, cork washers (70x45)5mm, cork washers (90x50)5mm, cork sheets(24x36) 3 mm, cork sheets(24x36) 4mm, cork sheets(24x36) 5mm, cork strip(40x3) mm, cork strip(40x5) mm, oil seals for 250kva of standard make, oil seals for 100kva & 63kva of standard make, m seal, cotton tap 1" size (length 35 meter), nawar tap 1 size 35 meter long, tape roll pvc, old saree/doti cloth, insulating gum of standard make, aluminum strip of sizes (3/6, 3/7, 4/8, 4/10 mm etc ) of standard make, rubberized cork sheet 4mm thick, 2 feet *3 feet, rubberized cork sheet 3mm thick, 2 feet *3 feet, ht brown paper 3.0/2.5 mil, packing sheet (1mm)press card board 1/2/3mm, synthetic enamel paint grey colour, varnish dr.beck/empire, glass wool sleeves of sizes, fevicol, backlite tubes 1/2 inch,(1mtr length), packing gutties, electrical grade kraft paper,4mil, rubber washers ( m-12 ht oil seal),, rubber washers ( m-12 lt oil seal),, rubber washers ( m-16 lt oil seal),, rubber washers ( m-20 lt oil seal),, rubber washers ( m-25 lt oil seal),, rubber washers ( m-30 lt oil seal),, fiber glass sleeves 2mm, fiber glass sleeves 3mm, fiber glass sleeves 4mm, fiber glass sleeves 5mm, fiber glass sleeves 6mm, fiber glass sleeves 8mm, fiber glass sleeves 10mm, fiber glass sleeves 12mm, fiber glass sleeves 15mm, oxygen cylinder for welding with water c