Latest aluminum ladder Tenders | Government aluminum ladder Tenders

corporations/Associations/Others

CTN :44723576

14 Jul, 2026 3.69 Lacs

Palanpur - Gujarat

Tender For corrigendum : supply of telescopic aluminum ladders as per given technical specifications for 400 kv kansari s/s & 400kv charanka s/s under palanpur tr. circle.

CTN :45737849

15 Jul, 2026 24.85 Lacs

Mumbai - Maharashtra

Tender For supply of supply of external hard drive in department of neurology , supply of digital weighing machine for wd-34 icu nephrology , supply and installation of drinking water purifiers for the main boys hostel , supply of external hard drive in department of neurology kem hospital , supply of 2 tb hard disc in dept of neurosurgery , supply and installation of aluminum ladder 10 feet anesthesia dept , supply and installation of window grill in dept of neurosurgery , supply of weight machine in anesthesia dept , supply and installation metal shoe rack 4 shelves 3 by 3 in anesthesia dept , supply and installation of aluminum ladder 9 feet dept of obstetrics and gynecology , supply of pestooflash dept in anesthesia dept , supply of plastic chair for medicine department , providing and fixing of name plate , providing and fixing of storage , supply of external hard drive in department of ent , supply and installation of drinking water purifiers , supply and installation of seminar hall seating facility , supply of high end laptops * /bid number : gem/2026/b/7726248 + /dated: 30-06-2026 ' ' / bid document 1 / 18

CTN :45716962

18 Jul, 2026 NA

Jammu - Jammu And Kashmir

Tender For supply of plywood , mcb , mild steel loop holes size 900x450mm with all fitiing , ms door , ms loop hole with shutter , ms prefabricated steel door , ms single bunk bed with ply cushion , ms steel ladder , nut and bolt for srt , office table big , oil bound distemper , paint brush , pc cable 6 sqm 2 core copper , pbs roll , peg stay 6 hooks , pendent holder , pipe 40 mm 20 ft long , pillar cock , pit cover for lc , plywood 9mm 6ftx3ft , pp gi 10ft long green colour , pp gi sheet 12ft , punch tape , pvc bd 8 x 10 inch , pvc bd 6 x 4 inch , pvc cable 2 core copper , pvc cable 10 sqmm 2 core aluminum , pvc chair with arm , pvc pipe 3inch , pvc door , rectangle pipe 2inch x 1inch , pvc reducer socket 1inch x 3inch , round up , sand , scatling , septic tank cover , shover , sleeping double bunk bed cushion , sliding bolt 10inch , soakage pit cover , soap disc , socket 4inch for pvc pipe , solution for pvc , srt 10ft , stainless steel hand wash basin with frain pipe and waste coupling , stainless steel dispenser , steel but hinges 3inch door hinges , starter 3 phase , steel door size 900 x 1800mm with all fittings , steel ladder , steel locker size 770x600x950mm , steel window , steel sink , stop cock , switch 5 amp , switch 5 amp comb , switch socket 15 amp , syntex stand , tab , tarpin oil , tefflon tape , table rod complete set , thinner , toilet seat cover , towel rod , tower bolt , u clip 25 mm , urinal port with waste pipe , union 1 inch , ventilator size 450x300 , non skid vetrified tiles 2ft x 2ft , wall mounting fan , wash bain piller cock , waste pipe , water camper stand , water proof plastic , water storage tank , welding rod , wc seat , white cement , wire mesh 4x20ft , wire 3 core 10sqmm , window rain protector , wire t c 16 sqmm , wooden board 8x8x2 , wk station table , wooden primer , wooden cabinet , cement opc 43 grade , hdpe film 500 micron , ceramic wash hand basin with all fittings , bib tap , pvc low level cistern 10 ltr capicity , cgi sheet 8ft , srt 8ft , 4mm clear acrylic sheet in lieu of glass for window , glass putty , pvc copper wire , ppgi sheet 6ft , plywood 8ft x4ft 12mm thick , 100 mm thick machine pressed interlocking paver block , pcc bricks , false ceiling tullu pump, 16 amp switch , 4 inch dia pvc plastic pipe, 5 amp s socket , aggregate , air filter , aluminium door , aluminum door closure, angle holder, bib cock brass, binding wire, black fill compound , paint, bow handle, brass rod, camper stand , celling fan , celling light , ceramic non skid tile 1ft x 1ft, cgi sheet 10ft, chair plastic , chair revolving, change over switch 32 amp, cloth hook, cob garden light, colour coated sheet 1ft long , concertina coil, concrete block , coolent , cp hose pipe , cpvc elbow 1inch, cpvc nipple 1inch, cpvc pipe 1inch, cpvc socket 1inch, cpvc tee 1inch, cpvc union 1inch, cutting disc 4inch, door rain protector , door stopper , double bunk bed , earthing set , elbow 4inch for pvc pipe , entrance canopy with cgi sheet fitted , exhaust fan, false ceiling 2ft x 2ft, fan belt, fan capacitor , fasterner , fire extinguisher 2 kg, flexible pipe 2 inch, flexible pipe 20mm, floor tiles of size 11inch x 11inch, flush tank pvc with complete, fly proofing door aluminium, fuel filter element, fuel pipe , gang box, gate valve, geyser 3 ltr, gi elbo , gi elbo , gi pipe 20 ft long, gi union, gi pipe socket, gi pipe union, gi pipe 20 mm socket, gi pipe socket, gi pipe union, gi pipe socket, gi socket, glass pane , hdpe can 35 ltr, hand jet spray, hdpe sand bag, hot and cold pipe 450mm, hexa blade, indian toilet seat, insulation tape, ismb, inverter led bulb, karandi, j hook angle small, ismb , ldpe film 130ft x 18ft, led bulb 15 w, led bulb 9 w, led security light 33 w, led tube light //bid details 2 / 141

Central Government/Public Sector

CTN :45702760

03 Jul, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - cond. and u/s ferrous fabricated materials of ms/ci scrap in nature such as weld mesh, ms duct, anti slip arrangement, earthen bond, galvanized (gi) sheet, ms sheet of various sorts and sizes, blower rotary forging, liner, guide fixtures, side frame fixtures, trolley of various sorts and sizes, trolley wheel & frame, battery fixing iron tray, ms pipe, coach/wagon stand, conveyor belt, ferrous body of auto change over panel, wire mesh, emu coach cut parts, ferrous portion of cab window assembly, sign on iron stand,castiron tems,girder base with concrete adhearings,gearset,grill,vcb panel boxes,gipipes,nuts and bolts,angles,rails,panel boxes,fissureplates,wheels,cupboard, structural items, different type of packing channels, trolley, lat, coach cut up parts, head stock, ms tank, grill gate, rolling shutter,wheel with plate, bins,regulator empty box, dolley, fob fencing, corrugated sheets, rectangular square tube &galvanised sheets, bogie mounted brake beam,brake blocks, gi sheets, pipe,square &rectangular tubes,stair case and handle,ferrous body of various types of motor, angle and channel fabricated with nut, bolt with or without brick and concrete,ladder,plate,grill, barricade, bolts, nuts, tray under frame, cut rod, rails of various sorts and sizes with/without concrete/brick/mud adhering,cut rails or rails used in support structures, coach head stock, coach parts,battery tray, ladder, all types of trolley wheels with minor nfs attachments, screens, channel post, sheets, stand, track machine cut up parts, ms pipes covered with or without rope &with or without parts of rubber, dome, vrla rack, vcb in dismantled condition, vrla battery box & clamp, stand, dtmf way station equipment box, led line display board, hydraulic lifting table with available fittings, vrla battery empty container, bed/base plate, fabricated cut rods,gi pipes, ci pipes and fittings, ms plate, roofsheets, angle, plate, platform bench, spring plank, clamps, cabinet, ms grill, sheets, ladder, steel gate, trolley,ms water tank, fire tender tank,roof truss supporting columns,purlins, sand box, fencing, tl rod, vcb panel, train display board, battery stand, boards, tools box, empty regulator &empty battery container, cut rod, ticket punching cut parts, hand rail, fabricated post/pipe/rod, strips, hoods, impellor, base plates, meshes, battery box frame, grs box, control panel, fan down rod, ac window covers ,angle / channels with/without rails, angle of tld, rack, lt panels, ferrous electrical panel boxes,i beam,transmission rods,fissure plates, main switch panel board w/o nfs attachments, ebc & rbc frame &enclosure,emu sliding door, high beam, silencer, , garden light post, tap changer cover with fiber attachments, empty battery container, stretcher, cupboard, dust bin, iron step, empty rotary junction box, empty regulator box, iron metal box, air reserviour compressor cylinder of varous sorts & sizes, garden light post, stand, mdb w/o non ferrous attachments, st light tubular post, gi/ms window, luggage rack, ,bed portion of weighing scale l with or without any minor non-ferrous attachments and all other scrap excluding ms hand hold in fabricated nature of sorts and sizes full/broken with/without other fs/ci/gi fittings in as is where is condition.pl no 98050126. note:(1) cutting is permitted to loadable size and for heavy nature items only. 2) during delivery if any major non-ferrous items found the same may be handed over to custodian. 3) jcb/crane loading permitted. location: (1)behind a row bin 3&4, (2)near old e-ii ward annexe

Corporations/Associations/Others

CTN :45662707

02 Jul, 2026 4.05 Lacs

Multi City - Karnataka

Tender For supply and maintenance of necessary materials for 7 pure drinking water units in bilagi town - item description: painting steel work with deluxe multi surface paint to give an even shade. two coat applied @ 0.90l/10 m² over an under coat of primer applied @ 0.80 l/10 m² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of engineer-in-charge.. (pwd sr v-2, 2023-24, item no-8.33.3, page no-46), item description: providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of engineer-in-charge..:(pwd sr 2023-24 / volumme ii / i.no-8.3.2 /p.no-41), item description: supplying and fixing rolling shutters of approved make, made of required size m.s. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to is: 4454 - part 1 and m.s. top cover of required thickness for rolling shutters. 80x1.25 mm m.s. laths with 1.25 mm thick top cover including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the engineer-in-charge.(csr 2023-24 v-2 itm no.11.6.1 pg 78), item description: dismantling tile work in floors and roofs laid in cement mortar including stacking material to the appropriate disposal area as per direction of engineer-in-charge. for thickness of tiles 10 mm to 25 mm (pwd sr 2023-24 / volumme ii /i.no-19.22.1 /p.no-189), item description: providing and laying cement concrete pavement with 1:2:4 for commercial & residential building floors, hardpaths, footpaths using 1 ce ment : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size, including finishing complete as per engineer incharge (pwd sr 2023-24 / volumme ii / i.no-9.4 /p.no-59), item description: flooring with 25mm thick polished shahabad slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab, , including cost of materials, labour, curing, polishing complete as per specifications.(pwd sr 2023-24 / volumme ii / i.no- 9.35 /p.no-64), item description: providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered upvc (matching to ral-9016) sections and with minimum tio2 (titanium dioxide) at 6phr with tpe(thermo plastic elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with galvanized iron profile through-out the window frame. the outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and sash with overall size of 39mm x 75mm with gi reinforcement of 2mm and mesh sash of size 37mm x 58mm. coextruded glazing bead for fixing of glass shall be of size 20mm x 24 mm. windows shall be provided with 6mm plain float glass, standard hardware& multi point locking system with touch lock. wall thickness of frame & sash shall be of 2mm-2.5mm. maximum possible size 2419mm x 2200mm (the cost is inclusive of all fixtures and separate charges for minor t&p s shall not be made) (pwd sr 2023-24/volumme ii/i.no-12.90 /p.no-110), item description: providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel prime

CTN :45645337

30 Jun, 2026 NA

Bangalore - Karnataka

Tender For steel almera and aluminum ladders at t2 terminal

Central Government/Public Sector

CTN :45224261

27 Jun, 2026 25.02 Lacs

Bardhaman - West Bengal

Tender For corrigendum : supply of jungle cutting sword , spade big , spade small , gaity , dhama , belcha , kanta , hammer , pliers , chisel , sickle , adjustable range , sabol , chopper , axe , pvc pipe 100 ft , safety belt , mosquito net , snake catcher of 6ft , rope of 1 inch thick , ring range , dal range , screw driver , hand held search light , electric extension cord of 30 meters , garbage collection plastic , multipurpose pruning saw , brush cutter safety helmet , disposable mask , apron , abdominal guard , steel dustbin , new rickshaw van , hydraulic tractor , honda bush cutter , spray gun pipe set for spray machine , vanfog fog machine , electrically operated walk behind scrubber dryer , petrol engine operated chain saw , lawn mower , industrial aluminum ladder ) /bid number : gem/2026/b/7550487 * /dated: 16-05-2026 & & / bid document 1 / 33

State Government

CTN :45425974

29 Jun, 2026 6.86 Lacs

Jaipur - Rajasthan

Tender For corrigendum : supply of miscellaneous t and p hardware and consumable fitting fixtures etc. for corrective maintenance to jmrc - non bsr items, aerolite 450gm (epoxy rasin and hardner adhesive make araldite/aerolite/loctite/bondtite), anchor fastener (10 mm), anchor fastener (6 mm), angle valve / brass dish angle valve stainless steel finish, araldite tube (180 gms) (epoxy rasin and hardner adhesive make araldite/aerolite/loctite/bondtite), bend nose pliers, big disc brass spindle 3/4", black screw 1 inch (500 pcs.), black screw 1.5 inches (500 pcs.), professional rotary hammer dril machine (make:bosch gbh 2-26 re or equivalent), brass spindle with rubber washer (04 no.), claw hammer, cp nipple (1 inch), cp nipple (1.5 inch), cp nipple (2 inch), cpvc ball valves 3/4 inches, cpvc socket 3/4 inches, cpvc solvent (20 grm each), curtain pipe (wall fix and hanging support) holder, cylinder 60mm godrej/dorset, cylinder 70mm godrej/dorset, danfoss solenoid valve coil, door closer sliding bar type, door stopper, doorset/godrej(europrofile cylinder lock)(80 mm), double side tape, dr. fixit waterproofing super latex compound (1 kg), electric extension board (10 mtr wire, 3 sockets), electrical tape (steelgrip, 30pcs), feviquick (20 gms) (grade 203), feviquick (20 gms) (grade 463), float switch, gaskit for windows / epdm rubber seal for windows, gi end plug (0.5 inch), glass fibre measuring tap 30 mtr. length, hammer drill bit (10 mm), hammer drill bit (12 mm), hammer drill bit 6mm, hammer drill bit 8mm, hasp staple (latch)(100 mm), hasp staple (latch)(80 mm), heavy duty stainless steel lock for glass door thickness 10 mm to 12 mm, hex head self-drilling roof screws with rubber sealing washer 12x65mm (200 pcs.), holdtite (50 grm each), hydraulic door closer (isi mark), key hive locks (drawer lock), l patti (2 inch), l patti (4 inch.), l patti (5 inch), metal disc cutter blade (04 inch), mortise lock 70mm complete, m-seal 90/100gm, nose plier, pad lock, pipe wrench 18", pu dotted hand gloves (make udyogi or equivalent), pvc green carpert mat 12mm thick 1200mm x 750mm, pvc safety gloves size large, pvc solvent (100 grm each), retro reflective tape 3m make (50 mtr.), ro cp nipple, round casing clip (100 pcs.), screw bit, screw driver, screw extractor set, self taping (hexa head)(02 inch) (100 pcs.), self tapping screw (6-8mm top dia) 13 mm, self tapping screw (6-8mm top dia) 19 mm, self tapping screw (6-8mm top dia) 25 mm, self tapping screw (6-8mm top dia) 38 mm, self tapping screw (6-8mm top dia) 50 mm, self tapping screw (6-8mm top dia) 75 mm, self-tapping screw (6-8mm top dia) 6.35 mm, silicon gun, silicon sealent (white/black/transparant ), sliding/telescopic ladder, small disc brass spindle 1/2", stainless steel frame less clamp (both side screw arrangement) (for ss railing glass support), steel measuring tap 5 mtr. length, stone cutter disc (04 inch), taflon tape, thinner, tool bag, tower bolt (6 inch), transparent extra strong virgin mlcl sheet film tirpal (120 to 150 gsm)(50x 30 feet), universal pvc cistern handle with rod, wall plug/screw gitti 38mm, wall plug/screw gitti (32 mm ), wall plug/screw gitti (50mm), wall plug/screw gitti (70mm ), waste pipe, water meter 1" (rahul make), water meter 2" (rahul make), wd-40 (400/420ml), zoloto 32 mm forged brass ball valve 1008b of isi marked

Central Government / Public Sector

CTN :45581464

24 Jun, 2026 NA

Rajahmundry - Andhra Pradesh

Tender For supply of heavy duty 8ft foldable slip resistant anti skid high quality aluminum ladder with hand railing and 1)appr weight 8.7kg, 2) 8 steps, 3)300kg load bearing capacity. 4)approximate dimensions 53cm length x 18cm breadth x 243cmheight. warranty 60 months. [ warranty period: 60 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45556017

16 Jul, 2026 NA

Mumbai - Maharashtra

Tender For corrigendum : supply of collapsible telescopic aluminum ladder (6/8meter) one set each ( 6/8 meter) for arme/ndb,sparme/udn, arme/bl, and spart/ba. [ warranty period: 30 months after the date of delivery ] ]

Aluminum Ladder Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government/Public Sector

Corporations/Associations/Others

Central Government/Public Sector

State Government

Central Government / Public Sector

Central Government/Public Sector