Tender For disbursement towards maintenance of a-14 kalkaji extension flats.sub head - upgradation work by providing and fixing tiles in shaft area and window grill in lift lobby and repair of window grill in flats of e-block and safety grills in shaf.........
Tender For providing and laying floor tiles and safety measures in window in chamber of joint controller (audit) along with painting and white washing in hp university, shimla-5.
Tender For tender for supply of main column of rhs 122x61x3.6 mm (9.67 kgsperrm) , 3.0m length each conforming to is 4923.2017 , truss the principle rafter and the bottom chord shall be fabricated out of rectangular steel hollow sections of size 96mm x 48 mmx 3.6 mm (8.00 kg per rm) with 1 by 2 slopes. all other strut members will be fabricated out of rectangular steel hollow sections of size 66mm x 33 mm x 3.2 mm (4.07 kg per rm). conforming to is 4923.2017 , side runner made of shs 45x45x2.6mm thick having two pales at both ends 45x90x6mm with two holes of dia 12mm welded on either ends between column to column for fixing u chanel for pir panels , purlin will be fabricated out of rectangular steel hollow sections of size 80mm x 40 mm x 3.6 mm (6.40 kgperrm) with cleats welded at both the ends conforming to is 4923.2017 , extention purlin shall be of 450mm long fabricated out of rectangular steel hollow sections of size 80mm x 40 mm x 3.6 mm (6.40 kgperrm) with cleats welded at both the ends conforming to is 4923.2017 , sun shade frame with sheet- sunshades shall be made out of 0.50 mm thick camouflage pattern colour coated steel sheet conforming to is 14246-2024 (or is 277-2018 reaffirmed 2022 for base galvanized sheet) fixed with angle iron frame of isa 40 x 40 x 5 mm (3.0 kgperrm) conforming to is 808-2021. , roofing sheets - 0.50 mm thick ppgi camouflage pattern (is 14246-2013) of size 3000x1060mmx0.50mm zinc coating 120 gsm (is 277-2018). self-drilling hex washer head fasteners (hot-dip zinc). , false ceiling supporting angle - ms 65x65x5 mm for placing of puf 40mm thick length - 4180mm , false ceiling supporting l-section of 50 x 50 x 5mm thick (3.80 kgperrm) fixed appropriately to the truss for placing of puf 40mm thick length - 3000mm , wall puff panel of size (1000 (w) x 3000 (ht) , 40 mm 0.50 mm colour-coated gi both sides , camouflage ext per off white , tongue & groove interlocking , conforming to is 16203- 2016 , partition wall puff panel of size (1000 (w) x 3000 (ht) , 40 mm 0.50 mm colour-coated gi both sides , bothside off white colour (intperext) , tongue & groove interlocking , conforming to is 16203- 2016 , puff panel for ceiling portion of size (1000 (w) x 3000 (ht) , 40 mm 0.50 mm colour-coated gi both sides , bothside off white colour (intperext) , tongue & groove interlocking , conforming to is 16203- 2016 , main external door - size 1000x2100 mm (01 no) 2 mm thick aluminium frame (is 1948-2024). shutter- 40 mm puf (0.50 mm ppgi both sides , . fittings- 4 nos magnetic hinges (100 mm hd) , 2 al sliding bolts (300 mm) , al tower bolt (200 mm) , 2 d-handles , 1 helical door spring , door closer (is 208-1996) , padlock + 2 spare keys. canopy 1300x450 mm with isa 35x35x3 mm frame. , internal doors - size 750x2100 mm (06 nos) 2 mm thick aluminium frame (is 1948-2024). shutter- 40 mm puf (0.50 mm ppgi both sides. fittings per door- 4 magnetic hinges (100 mm hd) , 1 al sliding bolt (300 mm) , al tower bolt (200 mm) , 2 d-type handles (150 mm). , fixed upvc window - 1000x450 mm (01 no) installed at ht 2.1 m from ffl. upvc frame & shutter thick (is 17953-2023). double glazed- 5 mm + 10 mm air + 5 mm toughened safety glass (is 2553 pt 1-2018). fixed gi wire mesh 18-20 g , (is 4948-2002). anodised aluminium grill on outer side (is 733-1983). rubberperneoprene packing for weather tightness. , ventilators with exhaust fan - 250 mm sweep (06 nos) 4 nos in toilet cubicles + 2 nos in bathroom cubicles. upvc frame 2 mm thick (is 17953-2023). shutter- 4 mm frostedperpinhead dg upvc fibre glass , drop-flap type , opens internally. fittings- hinges , eye hooks , tower bolt 100 mm (is 15833-2009). fly-proofing- ss wire mesh aperture on upvc outer frame. exhaust fan 200 mm with louver pre-cut at factory. , inner corner flashing 50x50x3000mm , 0.5mm thick , bird cover flashing 50x250x3000mm , 0.5mm thick , outer corner 3100mm x 200mm x 200mm , ridge cover 2400mm x 300x300mm , top & bottom u flashing 40x40x65x1.5mm thi
Tender For auction sale of others - released condemned and u/s abandoned railway staff quarters, under sse-works-mgn, {[1] 18 (a to j), 10 unit(type-1), location- morwani station, [2] 19 (a to d), 04 unit(type-1), location- bildi station, [3] 20 (a to b), 02unit(type-1), location- bildi station, [4] 61 (a to b), 02unit(type-1), location- lc-61, [5] 62 a, 01unit(type-1), location- lc-61 , [6] 16 (a to e), 05unit(type-1), location- raoti station, [7] 14 a, 01unit(type-3), location- morwani station]}, total- 25 unit consisting of,{[i] rail 75r, rail 41.25r, rail 90r, rail 69 lbs, rail 50 lbs, 60 lbs, 69 lbs cut rail, rail 52kg, rail 69 lbs double headed, cut rail, qty- 9972.40 kg approx., [ii] wooden scrap- door with and without chowkhat, wooden purlin, window with and without chowkhat, qty- 4822.47 kg approx., [iii] ms scrap- (1) rusted steel door, reinforcement, steel grill, gi pipe 40mm, ventilation, tiebar 50x10mm, xpm jail, angle 50x50x5, 75x75x10, 80x80x8, 45x45x4, ms wire, plate 8mm, flate bar, window bar, steel window), qty- 13823.98 kg approx, (iv) profile sheet, qty- 786 .59 sqm. approx, (v) pvc tank, qty- 12.00 kg approx, (vi) pvc pipe 110mm, qty- 45 rm approx, (vii) ac sheet, qty- 764.94 sqm approx, (viii) masonary, qty- 429.37 cum approx}. mode of delivery by lot basis and on as is where is basis, custodian- sse- works-mgn, fdp- 80 days. note- (1) hidden items other than jvr are not included in this lot, if found it will be handed over to the custodian before delivery, (2) description of lot is as per jvr, (3) electrical, non ferrous item are not included in this lot, (4) the eligible bidder shall prepare and submit the detailed dismantling scheme including methodology, safety precautions, sequence of dismantling, equipment to be used and traffic/safety arrangements to sectional sr. den/den through sr. dmm. (5) dismantling shall be permitted only after approval of dismantling scheme by the sectional sr. den/den.
Tender For supply of double sealed window glass unit for lhb coaches fixed window to rcf drg no. lw 54104 alt i, to size 1117(+/-1) x 697(+/-1)x18.38 mm, with outer glass safety laminated float glass with pvb film and inner glass of toughened as per mdts-089 rev-4 [ warranty period: 30 months after the date of delivery ] ]
Tender For supply of interior stickers with braille script for lhb ac 3 tier coaches. , as per drawing: le64016 alt b item no 1 to 7, 9 to 11,13, 15, 18 to 22,27 & 29 with braille script to icf/md/spec-253rev.00, amd-02 packing instruction: lettering inside: one complete set of lettering inside should be packed in cardboard box. different subsets should be made & a list of items should be pasted on each packet of subsets. letters packed in each subset under different headings are as under:- plumbing : emergency flush button, press for flush, notice for bio toilet moulding:- duties of coach attendant, push, pull, no smoking, alarm and penalty notice, door closes automatically, safety message near gate, notice for luggage capacity. lavatory:- dustbin, fire extinguisher, soap dispenser, no drinking water, no waste into toilet, western style, press for flush, fire prevention and safety, marking of lavatories / body side door, notice for lavatories, drinking water, unified notice for fire prevention & safety. seat & berth:- sticker for seat number, berth numbers, letter for chaining luggage, notice for unreservedcoaches. air brake:- reset emergency brake, feed pipe, brake pipe, closed, open, hand brake panel : furnish plate, complaint book. window & ceiling: pull window glass inside, indication plate & sticker for emergency window, emergency openable window the cardboard box shall carry a qr code having details as listed below : 1 name of the manufacturer 2 purchase order number 3 purchase order date 4 unique serial number (or lot number for bulk items) of the manufacturer or 5 date of manufacture 6 delivery challan no. 7 delivery challan date the qr code shall be as per iso/iec18004 model2 and the data shall be available as xml using the tags detailed above. incase the above details are not available, or the qr codesare not readable, the supplied material is liable to be rejected. [ warranty period: 30 months after the date of delivery ] ]