Latest aluminum alloy strip Tenders | Government aluminum alloy strip Tenders

Central Government/Public Sector

CTN :45395180

03 Jul, 2026 NA

Lucknow - Uttar Pradesh

Tender For corrigendum : 3/8 inch sq. drive ratcheting head, max. recommended working torque: 60 ft.-lbs with 30nm preset torque value, made in single piece aluminium alloy body, preset click type, interchangeable heads permit ratcheting accuracy: plus/minus 4% (clockwise), plus/minus 6% (counter-clockwise) from 20% to 100% of full scale. maximum weight: -1.5 kg. note- calibration certificate to be provided by nabl accredited lab or oem. certificate of genuineness to be furnished at the time of supply by oem/authorised dealer. make- snapon or armstrong or samtool or gedore or similar. [ warranty period: 12 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45436394

29 Jun, 2026 NA

Dehradun - Uttarakhand

Tender For supply of 1100v grade l.t. aerial bunched cable of size 3x120+1x95+1x16 sq.mm (phase wires bare messenger-cum-neutral wire+st.light wire), aluminium phase/street light conductor with xlpeinsulation conforming to is:8130/1984, aluminium alloy bare messenger conforming to is:398(part-iv)/1979, aerial bunch cable governing specification to is-14255/1995 with up to date amendments, if any. other technical specification should be as per annexure-a [ warranty period: 30 months after the date of delivery][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government And Public Sector

CTN :45392967

08 Jun, 2026 NA

Katihar - Bihar

Tender For supply of compression joint ri-1610-1, size as per specification no. ti/spc/ohe/fitting/0130 with a&c slip no. 1 and drawing no. eti/ohe/p/1610-1, suitable for ohe applications, manufactured from high conductivity and high strength material, complete with all required components for reliable electrical and mechanical performance under ohe service conditions, make/brand: scpl or similar, conforming to relevant railway/ohe standards and irs conditions with latest amendments. rdso item id: 3100655 , aluminium - alloy fittings, extruded tubes & sections. rdso item id: 3100655067 , compression joint (1610-1). [ warranty period: 30 months after the date of delivery ] ]

Central Government And Public Sector

CTN :45455009

26 Jun, 2026 NA

Lumding - Assam

Tender For supply of flood light led 50w input voltage range 145v-270v with cut off below 120v, 50 hz, ip66 , conforming to is 104322 part 5/section 5/ 2012 & is: 16107 (part 2/sec 1 2012, photobological safety of leds as per is 16108/2012, type b led luminaire as per is 16107 (part 2/sec 1) type 3 led module as per is 16103 part-2/2012, efficacy>100lm per watt, pf>0.95, driver efficacy>85, thd<10, led chip efficacy>130 lm/watt color temperature 6000k, cri>70, beam angle>120, heat sink-aluminium die cast with syfficient fins ti dissiple heat junction temperature<85 degree centigrade , operating temperature- 20 degree c to 50 degree c, 10% to 95% rh. all protection like - short circuit protection, over load protection , over voltage protection, reverse polarity , ir>100m ohm, protection against surge and transients>5kv internal and >10kv for external.the luminaire casing shall be die casted aluminium alloy with higher thermal conductivity corrossion, resistance epoxy powder coated , stainless steel fastner, led make osram/ nichia/ cre/philips/syska/samsung with lm 79, emi/emc compliance system lm 80 & tm 21 reports from accredited labnabi/ilac, dc/ac controlled gear as per is:15885(part2/section 1) 2012, bis safety for led luminaire as per is:10322(part 5) 2012, hsn code: 94054090 make- havells/bajaj/crompton/philips. [ warranty period: 48 months after the date of delivery ] ]

Central Government And Public Sector

CTN :45406504

26 Jun, 2026 NA

Lumding - Assam

Tender For corrigendum : supply of flood light led 50w input voltage range 145v-270v with cut off below 120v, 50 hz, ip66 , conforming to is 104322 part 5/section 5/ 2012 & is: 16107 (part 2/sec 1 2012, photobological safety of leds as per is 16108/2012, type b led luminaire as per is 16107 (part 2/sec 1) type 3 led module as per is 16103 part-2/2012, efficacy>100lm per watt, pf>0.95, driver efficacy>85, thd<10, led chip efficacy>130 lm/watt color temperature 6000k, cri>70, beam angle>120, heat sink-aluminium die cast with syfficient fins ti dissiple heat junction temperature<85 degree centigrade , operating temperature- 20 degree c to 50 degree c, 10% to 95% rh. all protection like - short circuit protection, over load protection , over voltage protection, reverse polarity , ir>100m ohm, protection against surge and transients>5kv internal and >10kv for external.the luminaire casing shall be die casted aluminium alloy with higher thermal conductivity corrossion, resistance epoxy powder coated , stainless steel fastner, led make osram/ nichia/ cre/philips/syska/samsung with lm 79, emi/emc compliance system lm 80 & tm 21 reports from accredited labnabi/ilac, dc/ac controlled gear as per is:15885(part2/section 1) 2012, bis safety for led luminaire as per is:10322(part 5) 2012, hsn code: 94054090 make- havells/bajaj/crompton/philips. [ warranty period: 48 months after the date of delivery ] ]

State Government

CTN :45415293

08 Jun, 2026 NA

Ranchi - Jharkhand

Tender For e quotation are invited for rate of materials - granular material or hard murrum for gsb works at quarry, aluminium alloy/galvanized steel, rcc pipe np 4 heavy duty non pressure pipe 1000 mm dia, rcc pipe np 4 heavy duty non pressure pipe 1200 mm dia, steel pipe 50mm external dia as per is:1239, coller for joints 300mm dia, rcc pipe np 4 heavy duty non pressure pipe 300 mm dia, steel helmet and cushion block on top of pile head during driving, steel pipe 25mm external dia as per is:1239, "np2 r.c.c hume pipe with collar as per i.s. 458-1971(i) 100 mm dia", "np2 r.c.c hume pipe with collar as per i.s. 458-1971(ii) 150 mm dia", "np2 r.c.c hume pipe with collar as per i.s. 458-1971(iii) 200 mm dia", "np2 r.c.c hume pipe with collar as per i.s. 458-1971(iv) 250 mm dia", "np2 r.c.c hume pipe with collar as per i.s. 458-1971(v) 300 mm dia", "np2 r.c.c hume pipe with collar as per i.s. 458-1971(vi) 450 mm dia", "np2 r.c.c hume pipe with collar as per i.s. 458-1971(vii) 600 mm dia", "np2 r.c.c hume pipe with collar as per i.s. 458-1971(viii) 700 mm dia", "np2 r.c.c hume pipe with collar as per i.s. 458-1971(ix) 800 nn dia", "np2 r.c.c hume pipe with collar as per i.s. 458-1971(x) 900 mm dia", "np2 r.c.c hume pipe with collar as per i.s. 458-1971(xi) 1000 mm dia", "np2 r.c.c hume pipe with collar as per i.s. 458-1971(xii) 1200 mm dia", "np2 r.c.c hume pipe with collar as per i.s. 458-1971(xii) 1400 mm dia", "np3 r.c.c. hume pipe (as per i.s 458-1971)(i) 300 mm dia", "np3 r.c.c. hume pipe (as per i.s 458-1971)(ii) 450 mm dia", "np3 r.c.c. hume pipe (as per i.s 458-1971)(iii) 600 mm dia", "np3 r.c.c. hume pipe (as per i.s 458-1971)(iv) 700 mm dia", "np3 r.c.c. hume pipe (as per i.s 458-1971)(v) 800 mm dia and 900 mm dia", "np3 r.c.c. hume pipe (as per i.s 458-1971)(vi) 1000 mm dia", "np3 r.c.c. hume pipe (as per i.s 458-1971)(vii) 1200 mm dia", "np3 r.c.c. hume pipe (as per i.s 458-1971)(viii) 1400 mm dia", jute rope 12 mm dia, aggregate size-45 mm to 2.36 mm, aggregate size-45 mm to 22.4 mm, aggregate size-2.36 mm to 0.075mm, aggregate size 22.4mm to 5.6 mm, aggregate size 63 mm to 45 mm, aggregate size below 5.0 mm, bamboo (1st class) 85 mm-100mm dia 2.0 m long, bamboo (1st class) 85 mm-100mm dia 2.5 m long, bamboo (1st class) 85 mm-100mm dia 3.0 m long, bamboo (1st class) 85 mm-100mm dia 4.5m-5.5m long, bamboo (2nd class) 75 mm dia, 1.8 m-2.5 long, bamboo (2nd class) 75 mm dia, 2.1 m-3.0 m long, bituminous sealant, blasting material, bond stone (400mm x 150mm x 150mm), corbelling stones (300mm x 150mmx 150mm), corrosion resistant structural steel grating, crow bras 40 mm dia (hire charges), crushed sand or grit passing 2.36 mm and retained on 180 micron, crushed slag, crushed stone aggregate 26.5mm to 75 micron, crushed stone chipping 6.7mm size 100% passing 11.2 mm and retained on 2.36 mm, crushed stone chipping 9.5 mm nominal size, debonding strips (3.75m x 10mm x 5mm cut-out of rubber filler board or similar material including 5% wastage), edge stone (450mm x 350mm x 100mm), edge stone (450mm x 350mm x 200mm), epoxy paint, epoxy primer, gi pipe 100mm dia (tata or equivalent make), gi wires (4mm dia), granular material (natural occurring soil gravel mixture/quarry waste, kankar, laterite, dhandla, hand broken metal 40mm size, interlocking blocks with 60 mm thickness, interlocking blocks with 80 mm thickness, key aggregates passing 22.4 mm and retained on 2.8mm, lime putty, local wood piles (1st class)150-200mm dia, 6m long, local wood piles (1st class) 100mm x 75mm, loose stone, ms sheet tube (47 mmx47mmx12 swg sheet), ms sheet 1.5mm thick, ms sheet 2mm thick, polythene sheeting (0.2mm to 0.5mm thick), (covering 2/3 rd dowel bars (20x23) and tight fit including 5% wastage), rcc pipe np3 (750mm dia), rcc pipe np3 (500mm dia), rcc pipe np4 (750mm dia), rcc pipe np4 (600mm dia), rcc pipe np4 (500mm dia), benzene, stone for stone set pavement (300mm x 200mm x 150mm), well graded granular base material-grading a 26.5mm to 4.75mm, well gr

Central Government/Public Sector

CTN :45450190

03 Jul, 2026 NA

Hyderabad - Telangana

Tender For supply of aluminium vanadium master alloy , aluminium molybdenum master alloy

CTN :44652784

08 Jun, 2026 NA

Ernakulam - Kerala

Tender For bid to ras supply of n9535 000222 copper strip 3200x50x6 3mm , n9535 000252 phosphor bronze foil for liners size 64000 x 160 x 0 05mm , n0267 0005605 piping steel heavy nominal bore 40mm x thickness 4 05mm bs , n9515 000488 sheet steel mild galvanised , n9520 000007 angles equal ms 40 x 40 x 5 mm , n9530 000012 nb rod rd 80mm , n4710 000458 tube copper solid 3 16 dia , n9535 000113 nb sheet 1250 mm length x 1000 mm width x 3 15 mm thick , n9510 000022 ms bar black rd in 4 5 to 5 mtrs length dia 12mm , n9530 000005 nb rod rd 16mm , n9530 000006 nb rod rd 20mm , n9530 000007 nb rod rd 25mm , n9535 000334 half hard aluminium alloy sheet 2400 x 900 x 0 90mm , n9650 000004 zinc ingot 99 99 purity also known as zinc cake , n3459 000001 zinc reference electrodes , n3415 000447 grinding wheel dia 125mm for 5 angle grinder , n3415 p030001 5 angle grinder mico bosch model gws 10 125c , n3439 000379 rod silver brazing alloy dia 1 60 mm , n0275 r017017 band saw blade 3 3 tpi 19 swg , n5120 000641 vice bench parallel 125mm quick release type , n5120 p060025 5 angle grinder , n4030 000073 thimblesopen type swr dia 51 mm , n4030 000075 thimble m s ) /bid number : gem/2026/b/7202395 * /dated: 26-03-2026 & & / bid document 1 / 24

CTN :45437069

18 Jun, 2026 NA

Paschim Medinipur - West Bengal

Tender For supply of electrical items -good to match with existing surface complete all as specified and directed by eic , supply and fixing in repair modular metal flush box of 4 module with white cover plate including , supply and fixing in repair modular metal flush box of 6 module with white cover plate , material and labour for earthing complete with galvanized steel plate electrodes of size600x600x6mm thick , supply and fixing of led wall light bed side light fitting for study table including 3 watt led, aluminium body, , supply only inner container ss or as per sample suitable for vertical type geyser 50 itrs storage capacity , supply only inner container ss or as per sample suitable for vertical type geyser 25 itrs storage capacity , supply only in repair thermostat 0-75 degree as per exiting size as per oems specifications complete all as specified and directed , supply only in repair heating clement 1.5 kw, as per oems specifications all as specified and directed , supply only in repair heating element 2 kw, as per oems specifications all as specified and directed , supply only indicator lamp with flexibe copper wire of suitable size red by green , supply and fixing pvc connection with steel reinforced pipe for hot water connection of size 18 inches x 1 by 2 inches , supply only apperture plate ss suitable for 25 by 50 itrs geyser along with rubber gasket, nuts, bolts, etc , supply and fixing in repairs plug top 15 by 16 amps suitable for geyser socket outlet complete all as specified and as directed , supply and fixing in repair stop valve but fancy type, chromium plated, screwed down cp of size 15 mm fancy type complete all as specified and directed. , supply and fixing in repair bib taps, cast copper alloy with butterfly handle, screwed down, screwed for iron pipe , supply and fixing of solar collector plate panel as per existing size, specification and make of capacity upto 200 lpd , supply and fixing of solar water heater tank as per existing size, specification and make of capacity upto 300 lpd , supply and fixing of cimfr certified led fiame proof batten suitable for single t8 tube of 20 watt, ip 65 protected , supply and fixing cimfr certified led flame proof bay light, 60 watt, well glass in die cast al housing with heat resistant toughened glass, ip 65 protected. 240 volt, , supply and fixing of flame proof weather proof rotary switch with cable termination box in lm 6 aluminium allcy housing single pole 16 amp, 250 volts , supply and fixing of flame proof-weather proof switch socket and plug combined 16 a, 250 v 2p plus earth , supply and fixing of flame proof weather proof switch socket and plug combined 32 a, 500 v 4p plus earth , supply and fixing of flame proof weather proof metallic hose conduit 3 by 4 inches dia, m20 by 3 by 4 inches conduit mxm by fm x m by fx f 3 by 4 inches dia 300 mm long , supply and fixing of flame proof weather proof metallic hose conduit 3 by 4 inches dia, m20 by 3 by 4 inches conduit mxm by fmxmfxf 3 by 4 inches dia 500 mm long , taking down copper by aluminium point wiring light, fan, socket or power complete, including fixture and fittings , supply and fixing for concealed conduit for one light point wiring with 1.5 sqmm nominal cross-sectional area pvc insulated unsheathed single core copper cable working voltage 1100 volts grade , supply and fixing for concealed conduit for one light point wiring with 1.5 sqmm pvc single core cable for one ceiling fan by exhaust fan point controlled by one, one way switch and regulator , supply and fixing for concealed conduit for one light point wiring 1.5 sqmm pvc single core cable for one 3 point 5 amps switch socket outlet point controlled by one switch on the same board. , supply and fixing for concealed conduit for //bid details 3 / 81 one light point wiring with 1.5 sqmm pvc single core cable for one 3 pin 5 amps switch socket outlet point controlled by one switch on independent board. , supply and fixing for concealed conduit for one light