Latest aluminum alloy Tenders | Government aluminum alloy Tenders

Central Government/Public Sector

CTN :40624921

12 Jun, 2025 NA

Multi City - Multi State

Tender For supply of hydraulically regulated door closer as per specification: conforming to latest version of is 3564 as amended upto date attached with non-porous body and back plate made of aluminum allo y conforming to latest version of is 617 should have torsion spring to stand of a steel conforming to l atest version of is 4454 (part 2) and nuts for fixing made of cast iron conforming to latest version of is 210 type of door closer and tubular type (type b)- as per fig. 3 and 4 of governing specification , e xposed type hydraulically regulated door closers, vertical hinge type doors closer, door closer with op ening to one side only and not weighing more than 80 kgs, piston or rack-pinion with steel aluminum alloy conforming to latest version of is 7283 all weather resistant homogeneous high viscosity hydraul ic fluid for hydraulic oil conforming to latest version of is no. 3098 adjusting arm , main arm & clamp for steel conforming to latest version of is no.7283, nominal sizes of door closers and designation of c loser 3 ? for main doors in a building such as entrance doors (mass of door 61 to 80 kgs), eccentric sh aft, internal bearing and gland, main arm bolt & top nut, pawl of a steel conforming to latest version of is no.7283 have been top lid: zinc alloy conforming to latest version of is no. 742 and accessories m ust be supplied with each closer for one fitting key, suitable spanner ,adjusting the spring valve and re gulating screw along with leaflet furnishing instructions for installation, closing time of regulating scre w: 10sec , hydraulic oil filling shall work for satisfactorily (at all temperature between 50 degree centi grade and 10 degree centigrade without requiring any change except adjustment of the regulating sc rew, provision for securely fixing the door closer to the door frame and to the door panel ,provision for carrying out repairs - such as replacement of broken spring, oil seal etc, nut / top lid of the assembly shall be fixed firmly on to the body and its shall be possible to remove the same whenever necessary, capability of closer to regulate the speed: by extending spring or adjustment in control valve screw, w arranty period: 1 year [ warranty period: 12 months after the date of delivery ]

Central Government/Public Sector

CTN :40604062

18 Jun, 2025 NA

Lucknow - Uttar Pradesh

Tender For supply of aluminium extension ladder 11m. aluminium ladder extension wall support ladder 24/40 as specificat ion given below aluminum alloy wall support extension ladder proved with top hand rails and platform steps made of 26 * 3 mm round corrugated flutted pipe main extrusion made up of aluminum alloy section 66*32*4mm thickness of he30 grade t6 tempe closed height 24 feet additional msguide pipe fixed inside height 40 feet additional msguide pipe fixe d inside of the ladder at 1 mtr internal for stability of ladder arms. make s.j ladders or similar [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40586777

27 Jun, 2025 NA

Multi City - Multi State

Tender For supply of 3/4" sq. drive preset torque with preset value locking and safety device made in single piece of aluminum alloy housing to be fixed at 250 nm ,(torque range -140-620 nm) with following accessories:- 1. 3/4" ratchet head fitting-01 no 2. open end fitting (size-46 mm)-01 no 3. ring end fitting (size-46 mm)- 01 no. along with calibration certificate issued by nabl accredited lab. [ warranty period: 30 months afte r the date of delivery ]

CTN :40359242

10 Jun, 2025 5.01 Lacs

Ganganagar - Rajasthan

Tender For corrigendum : supply of fire fighting items at ssctps, site store, suratgarh fire bucket 9 liters capacity bucket as per is standard design as per is: 2545 made out of heavy duty g.i. , two way dividing breaching made of light alloy as per is: 5131. , hand controlled branch multi purposes branch (nozzle) the nozzle should be adjustable gallonage with multiple flow settings & 63 mm bim inlet hand nozzle. the nozzle should have selectable flow setting of 115-230-360-475-550 lpm @ 7 bar with flush mode without shut off the nozzle made of pyrolite material, with pistol grip made of zytel and with celcon ball valve. the nozzle shall have feature for straight stream & spray pattern. the length of branch should not , exceed more than 10,5" and weight should not exceed more than 2,5kg, the branch should be simple to operate pattern control (1/4 tum from straight stream to fog). it should have minimum fog angle of 110 and raised lug marks straight stream for limited visibility operations. it should be capable of flushing without shutting down or changing stream patterns. the branch should be nfpa 1964 compliant, fm approved & ce certified, the warranty for branch should minimum five years. be , suction adaptors 100 mm female to 63 mm , instantaneous male, , high range zero torque nozzle specifically designed with ergonomics, handling, control, and reduced firefighter fatigue in mind. in addition, the pistol grip and injet swivel are positioned to eliminate the reaction force torque found in a conventional pistol grip designs. nozzle shall be combination of solid stream and fog nozzle with the capability to flow either stream independently or simultaneously. the solid bore shall have field changeable tips with orifices of either 3/8", ", 5/8", %", 7/8", 15/16", 1", or 11/8" and the fog shall flow. the nozzle shall have spinning teeth, multiple pattern detents, flush without shutting down, twist shutoff of the fog stream, and a full time swivel inlet 2 ", the weight of nozzle not more than 4 kg. the baje shutoff of the smooth bore shall be with dual drive trunnions, the nozzle shall also be constructed of lightweight pyrolite, have a shutoff ball with flow diversion for the fog waterway, have a 05 year warranty and meet nfpa , jet- fog type nozzle, conforming to bs: 336, 63 mm male instantaneous inlet connection, aluminum alloy material with natural finish, operating kg/cm2 pressure-10 , inline foam generator, inlet connection63 mm male instantaneous as per bs 336/is: 903 outlet connection- 63 mm female instantaneous as per bs 336/is: 903, foam induction-3 10 6%, maximum working pressure-10 kg/cm2 , seat washer material neoprene rubber is:937, for hydrant valve , fireman axe as per is: 926, made of forged steel, hardened, and having insulated for fire service use. , fire beater as per is: 8096, made of carbon (mild) steel mesh, and having bamboo handle, suitable for fire-fighting class-a , suction strainer for 100 mm suction hose as per is: 907, , fire hook as per is: 927 with bamboo. , armoured suction hose pipe 100 mm x 4.5 mtr length with gm 100mm male and female round threaded suction hose coupling conforming as per is: 902 , jet-spray shut off type fog nozzle 120 conforming to is:952 63 mm male instantaneous connection, inlet gunmetal material with natural polished, operating pressure-10 kg/cm2 , aluminium foam making branch pipe-fb 5x with g,m 63mm male instantaneous inlet with flow discharge capacity 225 lpm@7kg/cm2 with pvc pickup tube and ss strainer , revolving type branch pipe conforming to is:906 63 mm male instantaneous inlet connection, material gunmetal with natural polished, operating pressure-10 kg/cm2, flow-245 lpm 7kg/cm2 , alloy foam making branch pipe of fb-10x-suitable to discharge 450 lpm@ 7 kg/cm2 (made of aluminium alloy construction) with pvc pick-up tube along with stainless steel dip tube suitable for self-induction , ss 63 mm triple purpose nozzle as per is:2871 , ceramic wool fire blanket white,

Central Government/Public Sector

CTN :40529780

05 Jun, 2025 NA

Jhansi - Uttar Pradesh

Tender For 738578640040 (supply)-cutting disc wheel for chop saw machine, application: cutting of all metals(steel, stainless steel, mild steel, aluminum, alloy etc.)material / grade / abrasive type:a36rb size: 355 x 3.0 x25.4 (all dimensions in mm) ,speed : 4400 rpm make: bosch or norton or cumi or extra power or akari or equivalent [ warranty period: 12 months after the date of delivery ]

Central Government/Public Sector

CTN :40529983

18 Jun, 2025 NA

Bathinda - Punjab

Tender For supply of mechanical hooter of aluminium body with stand along with (a) instruction manual ( b) tool kit for repair (c) one handle other than hooter. specifications to be following and as per annexure- a attached: 1) material: aluminum alloy 2) sound intensity: 105-111 db at 5 mtrs. 3) variation in sound: 4 d b 4) audibity: 360 degrees 5) sound distance: 500 mtr [ warranty period: 30 months after the date of del ivery ]

Central Government/Public Sector

CTN :40500409

04 Jun, 2025 NA

Kota - Rajasthan

Tender For supply of caution order board retro-reflective engineering indicator boards, made of 2mm thick al uminum sheet or 3mm thick aluminum composite |sheet, face to be fully covered with high |intensity enca psulated type heat activated retro-reflective sheeting conforming to |type-iv of astm-d4956-01 in yellow & black or other colour combination including subject matter, message, symbols. borders etc. as approved by engineer incharge or as per irpwm guidelines, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class-2 of astm-d-4956-01 and fixing |the same wit h suitable sized aluminum alloy rivets @ 20 cm c/c to back-support |frame of m.s. angle iron of size 25mm x25mm x 3mmprovided all along the edges of board with theft resistant measures back side of board shall be with non-peelable weatherproof paint, consisting of one coat of zinc chromate |primer and two coats of epoxy paint. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40448563

05 Jun, 2025 NA

Medak-T - Telangana

Tender For supply of ceramic foam filter for filtering of aluminum alloys size: 50x50x22mm, 10 pores per linear inch.

CTN :40440253

12 Jun, 2025 NA

Bangalore - Karnataka

Tender For supply of aluminium tubes - aluminum alloy tube seamless round drawn hydraulic ams 4083l 6061 t6 , aluminum tube seamless round drawn hydraulic ams 4083l 6061 t6 , aluminum alloy seamless round drawn hydraulic ams 4083l 6061 t6 , aluminum alloy tube round drawn hydraulic ams 4083l 6061 t6 , aluminum alloy tube seamless round hydraulic ams 4083l 6061 t6 , aluminum alloy tube seamless round drawn ams 4083l 6061 t6 , al alloy tube seamless round drawn hydraulic ams 4083l 6061 t6 , al tube seamless round drawn hydraulic ams 4083l 6061 t6 , al alloy seamless round drawn hydraulic ams 4083l 6061 t6 , al alloy tube round drawn hydraulic ams 4083l 6061 t6 , titanium alloy tubing seamless hydraulic ams 4944m ti 3al 2 5v cold worked stress relieved , titanium alloy tubing hydraulic ams 4944m ti 3al 2 5v cold worked stress relieved , titanium tubing seamless hydraulic ams 4944m ti 3al 2 5v cold worked stress relieved , corrosion and heat resistant steel seamless tubing solution heat ams 5570q , corrosion heat resistant steel seamless tubing solution heat treated ams 5570q , corrosion and heat resistant steel tubing solution heat treated ams 5570q , corrosion and heat resistant steel seamless solution heat treated ams 5570q , nickel alloy corrosion and heat resistant seamless tubing annealedby solution heat treated ams 5581f type 1 , nickel alloy corrosion and heat resistant seamless tubing annealed heat treated ams 5581f type 1 , nickel corrosion and heat resistant seamless tubing annealedby solution heat treated ams 5581f type 1 , nickel alloy corrosion and heat resistant seamless tubing annealedby solution heat treated , corrosion and heat resistant steel seamless hydraulic tubing cold drawn 1by 8 hard temper ams 5584a , corrosion and heat resistant steel seamless hydraulic tubing cold drawn 1by 8 hard temper ams 5584a class 1 , corrosion and heat resistant steel seamless hydraulic tubing cold drawn 1by 8 hard temper , corrosion and heat resistant steel seamless hydraulic tubing cold drawn 1by 8 hard ams 5584a class 1 , corrosion and heat resistant steel seamless hydraulic tubing cold drawn 1by 8 temper ams 5584a class 1 , cm steel seamless tubing ams 6360p condition normalized or normalized and tempered stress relieved , 18by 10 cr ni corrosion resisting steel tube a cold drawn or b cold drawn and tempered , 18by 10 cr nickle corrosion resisting steel tube a cold drawn or b cold drawn and tempered , aluminium mg alloy tube temper designation 0 seamless tested hydraulically , al mg alloy tube temper designation 0 seamless tested hydraulically , al magnesium alloy tube temper designation 0 seamless tested hydraulically , al mg alloy temper designation 0 seamless tested hydraulically , al mg alloy tube temper 0 seamless tested hydraulically

State Government

CTN :40371745

16 Jun, 2025 3.33 Lacs

Sarni - Madhya Pradesh

Tender For procurement of spares of 25hp and 10hp pumps for drinking system of stps, sarni - supply of spares for 25 hp pump unifilter plant at stps, ph-3 sarni.make b. e. pumps, model-m1024kk, shaft (s.s) with key,nut and half round key, gland check nut p/e (gun-metal), gland check nut f/e (gun-metal), impeller guide bush (gun-metal), bearing bracket p/e (c.l.), bearing bracket f/e (c.l.), impeller (c.l.), tie bolt & nut (ms) m16 x 360 mm, tie bolt & nut (ms) m16 x 44.5 mm, supply of spares for 25 hp pump unifilter plant at stps, ph-3 sarni.make b. e. pumps, model-m1024kk, shaft with matching nut, impeller c.i., bearing bracket (c.i.), suction cover (c.i.), bearing cover (aluminum alloy), gland cap (c.i.)

Aluminum Alloy Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors