Latest aluminum bar Tenders | Government aluminum bar Tenders

CTN :45720703

30 Jul, 2026 2.00 Crore

Chhatarpur - Madhya Pradesh

Tender For inviting rates of different items for construction of diffrent type of work as per demand on cm help line or ward parsad or public - supply of handpump material 2026-27, excavation for roadwork in soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location with all lifts and lead up to 1000 m as per section-300 of the specifications.item no nvi-3.12, construction of embankment/sub-grade/earthen shoulders with material obtained from other sources, as per provisions of section 305 of the specifications, with approved materials/soil confirming to requirements given in table 301-1 of specifications including all lead and lifts, including cost of watering, compaction by vibratory roller/heavy pneumatic type roller etc. confirming to requirements given in table 301 2 of the specifications complete.item no nvi-3.12, construction of granular sub-base, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method at omc and compacting with vibratory roller of 80-100 kn static weight to achieve the desired density, including all lifts and lead complete in all respect as per section-400 of the specifications.by mix in place method item no nvi -4.1.1.1, construction of dry lean cement concrete sub- base over a prepared sub-grade with coarse and fine aggregate conforming to is: 383, the size of coarse aggregate not exceeding 26.5mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1 of the specifications, cement content not to be less than 150 kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in a batching plant, transported to site, laid with paver with electronic sensor/mechanical paver, compacting with 8-10 tonnes vibratory roller, finishing and curing and as per section 601 of specifications.item no nvi- 6.1.1, providing and laying cement concrete grade m-20 with 20 mm graded crushed stone aggregate, mixing shall be in mechanical mixer, laying with paver compacting by use of pin, plate / screed vibrators including form work by strong steel girders fixed by spikes, separation membrane 125 micron thick, including cutting of joints @ 4 to 5 m interval and filling it with hot applied bituminous sealant (without dowel bars) (max. thickness 20 cm).item no nvi-6.4, construction of dowel jointed, plain cement concrete pavement in m-30 grade concrete over a prepared sub base with 43 or higher grade cement, coarse and fine aggregate conforming to is:383 maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver with electronic sensor spreading the concrete by shovels, rakes compacted using needle, screed and plate vibrator and finished in a continuous operation including provision of contraction, expansion, and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, placing of dowel bar, tie rod admixtures as approved, curing compound, finishing to lines and grades as per approved drawings as per irc:15 and as per section-602 of the specifications complete excluding cost of steel in dowel bar and tie rod etc.item no nvi-6.2.1, earth work in excavation for foundation, trenches for pipes / cables or drains etc. by mechanical means / manual means (exceeding 30cm in depth.) including ramming of bottom,dressing of sides,disposal of excavated earth including of all lift and lead upto 50m.disposed earth to be levelled and neatly dressed.all kinds of soil item no nii 2.6.1, demolishing cement concrete manually/by mechanical means including disposal of material with in 50 meters lead as per direction of engineer-in-charge.1:3:6 or richer mixitem no nii

CTN :45688894

16 Jul, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For supply of supply of precleaner for air cleaner , connection , o ring for moatti lub oil filter , injector nozzle assembly , zinc rod , 1/8 bsp drain cock , plate covering , valve grinding paste (901702) , joint , lub.oil pressure sensor with switch , set bolt - m12x1.75x50 - 8.8 , set bolt-m16x2x50 - 8.8 , set screw m10x1.5x35-8.8 , stud , socket head grub screw - m10x10 , slotted c sunk head screw -m6x , circlip , banjo bolt-m14x1.5 , washer spring , clip jubilee for strainer , connection piece to turbocharger , flexible hose , temp.indicator 0 50 degc. , glass fuse 300ma size 5x20 fast blow , set of 10 , fuse 1a , iso1 electrodistributor , 24vdc , solenoid return , fuse 2a , fuse 6a , se card , m.e bearings scanner exhaust gas temp , on release safety card rgm card , logic unit and , programmable output(0-20) , indicating lamp-red , with lens , holder and lamp , indicating lamp-white with lens , holder and lamp , fuse cartridge 4a(am)10x38 , watershed connection , plunger barrel assembly (dia 25 mod) , o ring 4 x22.5 perbunan , o ring , o ring (for liner collar) , temp.switch(model ti-250-s)95deg 10m capilla , pressure transmitter , pr. transmitter 0-10 bar , gfl bolts , low lub oil sump level switch , set bolt -m20x2.5x120-8.8 , set scrw -m20x2.5x40-8.8 , stud m12x1.75x45-8.8 , self locking nut , allen screw , screw , socket head cap screw-m12x25-12.9 , socket head cap screw -12x40-12.9 , socket head cap screw-m12x55-12.9 , circlip , circlip external -60mm , banjo bolt - m22x1.5 , washer copper , copper washer , copper washer(33x39) , mech dir pin , spring dowel pin , spring dowel , lock washer pair , plain bearing with bearing bush , thrust ring , locating ring , ring nut , intermediate ring , sealing disc , contact no , pressure gauge 0-4bar dial 4 bourden ss3 , analog indicator 72x72.0-4bar i p4-20m , pressure transmitter , range 0-6bar , pressure switch , set at2.0b , pf-3p4-w-bb-1x00-21b-10b-db-n-v.t , solenoid valve nc 24vdc(y94 , y97 , y142.y143 , y) , high signal selector (or module) , solenoid valve no.24 vdc (y198) , safety stop , pressure guage with glycerine , i/p-0-10 bar , pressure transmitter 0-4 bar 24vdc o/p-4-20 ma , pressure transmitter 10 bar 24vdc o/p-4-20 ma , pressure guage with glycerine , i/p-0-6 bar , selector plate (opening 1 , 3 , 5) , pressure transmitter 6 bar 24vdc o/p-4-20 ma , pneumatic distributor (7/1 , 7/2 , 7/3) fuel rack , pressure transmitter 40 bar 24v dc , pneumatic distributor (8/1 , 8/2 , 8/3 , 8/4) stop , pressure regulator (5) , on/off switch , 2 pole , off delay timer 0.2-300sec.+socket , converter module(t452 , t458)charging airtemp.f.w.temp.(0-100) , supply card , ae 24/24 , sleeve nt-hh-pn10-dn100 , damper key , spring pack(new) , o ring 8.2x680.6 (nitrile) , o ring , o ring , bush(32307) , bush(32301) , signal isolator 4-20 ma/4-20ma loop powered , bearing temp measure card (mtp card) , bearing temp alarm card (aip card) , regr. safeties temp. card (rsp card) , on release safety icm1 card , frequency divider for governor speed sensor , a.b.b t/c magnetic speed sen , solenoid valve cnomo dia-1.6 , 24 vdc , regulator for fw temp. , 24vdc , i/p-rtd , o/p-4-20 ma , green head for push button , blue head for push button , on delay relay 24v dc , threshold module , rgm card , frequency divider-turbo speed , cable (engine speed measure) , pneumatic switch for local/remote operation , selector plate (solid) , selector seal , sub base seal , pilot push in type , fresh water air cooler inlet connection , fresh water pre heating inlet connection , fuel rack indicator , pressure gauge 0-6 bars , pr. switch 1.2bar min. , pr. switch , 4140-c-k-1-e-22-aa0 , 4.1b , pr switch type 4140c-19 bar , pressure transmitter p5r-6bar-4-20-1/2-pe , pressure transmitter p5r 0-40 bar , mss module 0-150 deg(convertor) , temp switch tcm96p 40deg c decreasing , temp switch tcm96r 90deg c increasing , temp switch tcm96r 95deg c increasing , pressure transducer 0-10 bars , mss module 0-100deg.c 4-20 temp con

CTN :45624706

13 Jul, 2026 NA

Baitul - Madhya Pradesh

Tender For raw materials office stationary - package 1 hardware items, m.s.round bar 65 mm, m.s.round bar 55mm, m.s.round bar 45 mm, m.s.round bar 40mm, m.s.round bar 35 mm, hss tool bit 1/2 x6 inch, hss tool bit 3/8x6 inch, hss tool bit 1/4x6 inch, power saw blade, hacksaw blade (miranda), cotton waste, oil 90 num, oil 40 number, cutting oil, emery cloth 200 grit, grease, diesel filter, oil filter, air filter, power steering oil, emery paper 36 grit, sulphuric acid (h2so4), soldering paste, ms flat 50x10 mm, ms flat 50x5mm, ms flat 65x10 mm, ms flat 70x10 mm, ms flat 75x10 mm, ms flat 100x10 mm, ms flat 50x12 mm, hexa blade (pack of 100), round bar 10mm ms,, gi sheet 0.5 mm, dowel pin, emery paper 80 grit, counter sunk head screw, round head slotted screw, drill bit 3mm, drill bit 4mm, drill bit 6mm, drill bit 8mm, drill bit 10 mm, drill bit 12 mm, punch, pan head revit, ms angle 25x25x3 mm, ms angle 40x40x5 mm, ms strip 20x2 mm, ms pipe 50x3 mm, copper pipe 1/2 inch, welding electrode 2.5 e6013, welding electrode 3.15 e6013, welding electrode 4mm e6013, oil paint, soft wood 4x4x5, soft wood 3x3x5, soft wood 2x1x5, soft wood 1x1x5, fevicol, nails 1, nails 2, nails 3, screw1, screw 2, screw 3, oil stone, wood polis titli, touch wood, plywood 8mm (4feet x6feet), plywood 12mm (4feet x6feet), plywood 18mm (4feet x6feet), emary pepar 80 no, emary pepar 100 no, emary pepar 120 no, grinding disk, grinding disk, cotton tape, pili mitti powder, wooden putty, polyfix wood sealer, paint, distilled water, oil paper sheet, steel wire brush, multipurpose cleaning brush, brush, cleaning solvent, benton grease, battery clamp, hydrolic fluid, package 2 electrical, battery, soldering iron, soldering wire, soldering flux, resistance 1 ohms, resistance 10 ohms, resistance 1k ohms, resistance 10 k ohms, resistance 100k ohms, inductor 4.7uh, inductor 10uh, inductor 5uh, inductor 6uh, inductor 8uh, inductor 330uh, capacitor 3f, capacitor 3.3f, capacitor 5f, capacitor 6f, capacitor 5uf, capacitor 6uf, capacitor 8uf, leds 2v, leds 2v, leds 2v, leds 2v, leds 2v, push buttons, ic 741, ic 555,, mcb,ic7806, mcb, ic7905, switch two way, 5 pin shocket wall mounting type, wall mount batten-holder, bakelite angular-holder, fan regulator mounting type, hrc fuse -, 12 mm no.5 wood screws, 20 mm no.6 wood screws, 25 mm no.6 wood screws, neon lamp switch bord, machine screw, saddles, tube light choke, tube light rod, tube light holder plain, h.p.mv lamp holder suitable for, h.p.mv lamp choke -, capacitor, lead acid battery, pvc copper wire 1mm (90meter), pvc copper wire 1.5 mm (90meter), pvc copper wire 2.5mm (90meter), crimping spade 6a, crimping spade 16a, mccb, elcb, rccb, helogen lamp incandescent lamp, high pressure mercury vapor lamp, l.p.m.v lamp, high pressure sodium lamp, low- pressure sodium lamp led, helmat electrician yellow color, screw driver kit set, toggle switch,, resistors, carbon composition 62k , 1/4 w, 5%, resistors, carbon composition 33k 1/4 w, 5%, resistors, carbon composition 22k 1/4 w, 5%, resistors, carbon composition 220 1/2 w, 5%, resistors, carbon composition 330 1/2 w, 5%, resistors, carbon composition 470 1/2 w, 5%, resistor 10 ohms 5w, resistor 1k ohms 2w, resistor 330k ohms 2w, resistor 2 ohms 5 w, resistor 50 ohms 5w, potentiometer 500 ohms, 0.5a, potentrometer 100 k ohm, resistor 22 ohms 1 w, pvc saddles, led, intermediate switch, tap roll electrician, diode in4007, step-down transformer, variable resistor, dry cell, zener diode,, buzzer, conduit pipe metal iron, bare copper wire, multistrand cable 14/0.2 mm (90meter), multistrand cable 23/0.2 mm (90meter), multistrand cable 48/0.2 mm (90meter), incandascent lamp, pvc cable 3 core, pvc single stranded copper cable 1/1.4 ,1.5 mm, pvc single strand aluminium cable 1/1.8 , 2.5 sq mm, cotton tap, binding steel gi wire, lead and tin alloy, impregnated cotton tap, bitumen compound, lug board, double pole switch, lamp holder bayonet cap batten, barrater resistor, 4 way terminal pad, miniature l

State Government

CTN :45397974

24 Jun, 2026 80.77 Lacs

Kota - Rajasthan

Tender For corrigendum : work of name :- remaining work pkg. no. rj-23-10/srf (rr) / np / 2022-23 distt kota - providing, laying and spreading and compacting specified graded crushed stone in sub-base course including premixing the material at omc in mechanical mixer (pug mill), carriage of mixed material, laying in uniform layers with motor grader, f.e. loader, on a prepared surface and compacting with vibratory compactor to achieve the desired density including all material, labour, machinery, lighting barricading and maintenance of driversion complete. (morth specification clause 401). with all lead & lift, fdkuiqjk rfd;k ls punzsly, total, kilometre stone reinforced cement concrete m15grade kilometre stone of standard design as per irc:8-1980, fixing in position including painting and printing etc ordinary kilometer stone (precast), fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, kilometre stone reinforced cement concrete m15grade kilometre stone of standard design as per irc:8-1980, fixing in position including painting and printing etc hectometer stone (precast), fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, providing and erecting typical citizens information board as per approved drawing & specification of mord, made of two ms sheet of 1.6 mm thick each of size 900 mm 750 mm stiffened by angle iron 25 mm 25 mm 3 mm all around the plate and plates fixed on frame of 75 mm dia pipe of 12 swg sheet (vertical post 3050 m with angle holdfasts and horizontal member 900 mm) to be joined by 5 mm thick ms plate at 12 places (65 50 mm) duly embedded in cement concrete m-15 grade of block of 600 mm 600 mm 750 mm size below ground level as per enclosed drawings & as directed by engineering - in-charge. all ms will be stove enameled on both side, lettering, figuring and border will be with ready mixed synthetic enamel paint of superior quality in required shade and colour etc. complete in all respect. all sections of framed post and steel tube will be painted with primer and two coat of epoxy paint as per drawing and as per mord specification., fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, providing and laying reinforced cement concrete pipes np-3 for culverts including jointing ends and fixing collar with cement mortar 1:2. (morth specification : clause 1000/2900). 300 mm dia, fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, dry lean cement concrete sub - base. construction of dry lean cement concrete 1:3:6 sub-base over a prepared sub-grade with coarse and fine aggregate conforming to is: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blening to be as per table 600-1, cement content not to be less than 200 kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonne vibratory roller, finishing and curing., fdkuiqjk rfd;k ls punzsly, total, providing and laying un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub-base with 43 grade cement, coarse and fine aggregate conforming to is:383, maximum size of coarse aggregate not exceeding 25mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or fix form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures and vacuum processing pump as approved, curing compound, finishing to lines and grades as per drawing as per morth specification : clause no. 602, 112. using cement concrete m-30 pavement grade, fdkuiqjk rfd;k ls punzsly, total, earthwork in excavation for foundation of structure complete with all l

CTN :45519945

22 Jun, 2026 37.35 Lacs

Chhabra - Rajasthan

Tender For requirement of spares of m/s ingersoll rand make conveying air compressor model r-160i-x 7.5wc and up5-22-7 for dry fly ash dense phase system,unit#3 and 4, ctpp, chhabra - model no. r160i-x7.5 wc, seal, shaft high pressure part no. 89292445, element, seprator tank 18 inch part no. 23566938/ 23545841, oil cooler, water cooled part no.23572415, after cooler, water-cooled part no.23572423, cap screw m6x25 soc hd cap w/nylon insert part no.22168710, pressure transducer 0-225 psig part no.47545275001, pressure transducer 0-15 psig part no.47560902001, assembly gear set 160 kw single stage 7.5 bar part no.23521859, pin dowel [motor] part no.39194915, pad pre filter part no.23523772, actuator service kit part no.23467251, inlet valve part no.23421217, elbow 1/4" 90 degree straight thread ms part no.96757604, spacer gear (ce177g) part no.39326483, sleeve motor shaft 4.25 od m132/160 part no.89292478, key,square both ends 0.88sq x1.25 part no.95135638, valve in line check part no.23453020, tube gear case scavenge part no.23453129, air cleaner assembly nlg37-42 pico standard part no.23390156, ultra coolant (208 litres) drum part no.39433743, key, rect one round end part no.96759212, clamp, plate part no.35295336, screw, socket head part no.32555819, housing, seal part no.22880744, gasket, gear case part no.39454558, pin, dowal [air end] part no.35295336, valve, orifice [separator tank] part no.23449200, oil filter assembly part no.23523434, o ring set part no.ok002222, pressure transducer cable part no.23529373, temprature sensor part no.23522246, valve min press check 132-160 kw part no.23521297, 5sv solinied cable part no.23562432, model no. up5-22-7, element coolant filter part no.54672654, element seprator 194cfm (spin-on) part no.54749247, pad pre filter part no.22053722, element air filter part no.89295976, kit, inlet valve repair part no.22067177, kit-mpcv part no.22064695, kit thermal valve repair part no.22393326/ 22832885, valve solenoid 125 inch npt part no.54774302, valve solenoid 1/2 in npt 110 volt part no.54654652, spring gas part no.54749114, elbow .31tx .50sae part no.95993572, elbow , 90deg male 37a10c3xz2 part no.95937686, tube oil feed (rear bearing) part no.85581858, tube, vmc block to bare part no.85581866, belt part no.89265052, ultra coolant (20litres) drum part no.38459582, tempreture sensor part no.22137848, conteroller part no.22128763, tube nylon part no.39124813, tube nylon part no.39124821, elbow part no.39155650, elbow part no.39155577, nipple part no.22354989

Central Government/Public Sector

CTN :45407974

19 Jun, 2026 NA

Raigad - Maharashtra

Tender For corrigendum : tender for supply of p325a/b gasket (del.cover) blo , p325a/b gasket (barrel to /del.cover) , p325a/b o-ring (stg casing) , p325a/b o-ring (drm lnr ) , p325a/b taper pin , p325a/b balance drum bushing , p325a/b cylindrical dowel pin , p325a/b fan cover , p325a/b gasket (stg. to bar) , p325a/b gasket (stfg. to bar) , p325a/b shaft , p325a/b split ring , p325a/b sleeve (split ring ) , p325a/b sleeve brg isolator de , p325a/b sleeve brg isolator nde , p325a/b o-ring (bal. drum ) , p325a/b balance drum , p325a/b bearing cover (suc) , p325a/b bearing cover (dis) , p325a/b o-ring (brg.hsg) , p325a/b brg isolator de i/b , p325a/b brg isolator de o/b , p325a/b brg isolator nde o/b , p325a/b brg isolator de o/b , p325a/b lubricating ring , p325a/b lock nut , p325a/b lock washer , p325a/b barrel casing , p325a/b brg hsg-(suc) , p325a/b brg hsg-(dis) , p325a/b bearing bracket 01 , p325a/b bearing bracket 02 , p325a/b stg box hsg (suc) , p325a/b stg box hsg (dis) , p325a/b washer 01 , p325a/b washer 02 , p325a/b washer 04 , p325a/b cyl dowel pin 10 , p325a/b cyl dowel pin.12 , p325a/b cyl dowel pin.13 , p325a/b cyl dowel pin.15 , p325a/b cyl dowel pin.16 , p325a/b flg-del. cover (blo) , p325a/b flg-barrel casing , p325a/b fan 02 , p325a/b fan 01 , p325a/b hexagon head screw , p325a/b hex scw( de & nde) , p325a/b stud ( bar-ltr nde) , p325a/b stud (del.cov nde) , p325a/b stud (stg. box-gl) , p325a/b stud (brl-del. cvr) , p325a/b sct head (cvr-hsg) , p325a/b socket head(ltr-brg) , p325a/b hexagon nut , p325a/b hexagon nut 03 , p325a/b hexagon nut 05 , p325a/b hexagon nut 11 , p325a/b hexagon nut 02 , p325a/b hexagon nut 23 , p325a/b hexagon nut 24

CTN :45407833

23 Jun, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For supply of bush eg8338v 07256602a 03 , bush eg8338v 07256602a 05 , bush eg8338v 07256602a 06 , bush eg8338v 07256602a 08 , bush eg8338v 07256602a 27 , bush eg8338v 07256602a 38 , csk copper screw eg8338v 07256602a 64 , pinion shaft dm q 589 06 , ratchet dm q 589 07 , key bar dm q 589 11 , bush dm q 589 19 , bush dm q 589 18 , spring dm q 589 05 , grub screw dm q 589 dd , circlip dm q 589 ww , bush dm q 589 13 , bush dm q 589 14 , foundation bolt for 1 st reduction gear box and 2 nd reduction gear box assy 0726602 d 10 , hex nut 0726602 d 11 , lock nut 0726602 d 12 , plain washer 0726602 d 13 , foundation bolt for base plate 0726602 d 14 , foundation bolt for base plate 0726602 d 15 , hex nut 0726602 d 16 , lock nut 0726602 d 17 , dowel pin 07256603 d 22 , drain plug 07256603 d 23 , spring washer 07256603 d 38 , hex hd screw 07256603 d 39 , hex hd screw 07256603 d 40 , spring washer 07256603 d 45 , oil level indicator 07256609 d 16 , spring washer 07256609 d 38 , hex screw 07256609 d 39 , csk screw 07256609 d 40 , circlip 07256609 d 44 , brake hand wheel 07256602a 23 , brake spindle 07256602a 28 , dip stick 07256602a 31 , bevel wheel 07256602a 36 , bevel pinion 07256602a 37 , dog chain 07256602a 59 , oil plug 07256602a 68 , dog chain 07256605c 19 , bearing 3012 158 105 , bearing 3012 158 106 , bearing bush 3012 158 110 , thrust bearing 3012 158 111 , bush bearing 3012 158 112 , slipping clutch 3012 158 116 , bearing for worm 3012 158 117 , bearing for worm 3012 158 118 , grease nipples 3012 158 119

CTN :45419223

18 Jun, 2026 NA

Katni - Madhya Pradesh

Tender For supply of caliper harmafrodaite , chisel cold flat , hexa frame fixed type , safety goggles , straight ede , stud extrecter , verneir caliper , marking table , portable hand drill machine electric type , drill twist taper shank , file round second cut , file trungular second cut , file flate second cut t safe edge , file half round second basterd , file round secont bastard , file carad wire brush , wooden handal soldring iron copper bit , blow lamp , inter chegeable ratchet socket set , double ended tublare box spanner set with tomm bar , clamp toolmaker , hand reamer set taper pin straught fiute , machine remerr prallel helical fiute , chisel cold crosscut and diamond point , adjustable pipe die set bsp , wheel dresser star dresser with holder , machine vice swivel base , locker with 8 drawer , metal rack , machine vice , wing compass , hand hammar with handle , torque wrench standard ratchet , power tools for fastninig , different profile gauge plate type , indexable boribar with inserts , tempreature gauge , dowel pin starigut , standard tap screw , lapping plate , meduam carboon heat trated alloy steel metric stand , capsscrew , drill gauge , cast iron valve flanged type , c.i. sluice gate valve flanged type , stop cock , slip on forge steel flange , bolt nut with washer , pully for flat belt , steel keys , packing gasket , washer cluth key jib cotter and cirlip , drill drift , bearing different type , lifting sling , bearing extactor , pully extractor , flat headed hammer with handel , planishshing hammer , snip bent left cut , gauge snape go and not go , gauge pluge , gauge telescopic set , dial vernier cliper universal , depth micrometer , digital micrometer outside , comparator gauge dial indiate with stand and vracket , enggineering try squar , surface roughnes comerission plate , pipe bender machine , pedastel type grinding machine , hexa frame wing nut , file square secound cut , file flat bastard , stake grooving //bid details 2 / 56

CTN :45361598

19 Jun, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For tender for supply of o-ring , gasket , safety plate for fixing pipe , oil turbo sleeve , o-ring 40 , 64x5 , 33 , head gasket , left air exchanger , drive shaft water pump , water pump , nozzle bosch , wiring sensors , wiring , spring for valve , wiring , safety bracket , seal ring , pumping element , gasket , seal ring , oil breather pipe , revision kit 5342 711 0009 , maganetic pick up , blow-by filter cartridge , nozzle holder sleeve , oil breather pipe , gasket kit , no return valve g.1/4 , ormant resilient b-mf-901 , rubber sleeve , fuel delivery tube-a1 , fuel delivery tube-b7 , belt , belt , bushing , sleeve , gasket , flexible pipe , air breather pipe , breather pipe , sleeve , bearing spacer , gasket , adjustment shim , damper , compensator support , complete , fuel recovery block , oil valve assembly , 3-way hose holder manifold , flexible hose , gasket , ormant resilient b-mf-901 , solenoid valve danfoss g1/2 , block assembly , reduction sleeve , pressure transmitter , tappet , regulator move assembly , connecting cleeve , dowel , centering sleeve , gasket , thin sheet segment , bearing spring , bearing spring , push rod , gasket , thermostatic valve , fuel drain tube , crystal gauge , gasket , gasket , injector gaskat , gasket , oil pressure valve , flexible hose , o-ring , thrust bearing , gasket injector spill , thermostat type amot 95 c r , pipe , pipe , ring , valves cone , seal ring , sleeve , ball bearing , complete fuel injector , block , ball bearing , gasket , oil sump , impeller , front engine crankcase gasket , gasket , pressure gauge 14 bar f , o-ring , conical spring washer 8x1 , 4 uni 8836 , conical spring washer 8x1 , 9 uni 8836 , ball bearing , gasket , gasket 17x22 uni 3443 , gasket 38x47 , gasket , clamp 40-60 w5 , hose clamp 80-100 , clamping collar , clamping collar , hose clamp 25-40 w5 , clamping collar , clamping collar , clamp d10 , clamp 84-92 , hose clamp 109-116 , washer , gasket , gasket 19x14x1 , gasket 20x16x1 , gasket 25x21x1 , gasket , gasket , gasket , gasket , gasket 26x20x1 , 5 , gasket , gasket , gasket 36x30x1 , 7 , gasket 54 , 5x48x3 , gasket rotor 30x42x7 , gasket , o-ring , o-ring , o-ring , o-ring101 , 27x2 , 62 , o-ring 9 , 19x2 , 62 , o-ring 37 , 77x2 , 62 , o-ring 18 , 72x2 , 62 , o-ring 25 , 07x2 , 62 , o ring seal , o-ring seal , o-ring 68 , 26x3 , 53 , o-ring 31 , 34x3 , 55 , o-ring , o ring , o-ring 67 , 84x3 , 53 , o ring , o-ring , seal ring , retaining ring , retaining ring , junction , oil pump assembly , thrust ring , gasket

CTN :44713484

23 May, 2026 NA

Leh - Jammu And Kashmir

Tender For corrigendum : supply of jcb 3dx super spare parts d d - 10 amp fuse , 15 amp fuse , 20 amp fuse , 5 amp fuse , 7 amp fuse , actuator 4wd switch , actuator switch , front worklights , actuator switch rear worklights , adapter , adapter 1 by 2 inch unf , adapter 5 by 8 into 1 by 2 mm , adapter air filling , adapter g3 by 8 a , adapter hose , adapter includes o ring , adapter mm , adapter tee lh top hydra clamp , adaptor 1 by 4 bsp into 9 by 16 sae , adapter g5 by 8a 7 by 8unf m , adapter 3 by 4 , adapter 39 mm long mm 1 by 2 , adapter 90 deg elbow 9 by 16 sae x g 1 by 4 hydra clamp , adapter aor air filling , adapter g5 by 8a by 7 unf m , adapter hose connector 16mm od , adapter lvb , adapter male , adapter positional , adhesive washer assy aid , adjustable spnr 10 25 mm , adjuster , alarm buzzer , baffle , baffle prefilter , ball 11mm diameter , banjo bolt , banjo washer bar window stay , bar window stay , barrle lock , beading rubber , bearing , bearing 14 dia ball , bearing needle thrust , bearing self lubricating , bearing thrust , blank radio aperture , block selector , bolt , bolt 7 by 16 inch unc , bolt m 12 into 40 , bolt m12 into 10 , bolt 12 inch into 110 , bolt 3 by 8 , bolt 476 , bolt banjo , bolt dowel , bolt dowel bolt , bol flrnge head , bolt flenge head , bolt m 10 into 110 , bolt m10 into 100 , bolt m 10 into 20 flsnged , bolt m10 20flsnged , bracket , bracket roof liner , bracket caliper mount , bracket capling assy 10 amp fuse part no cb 5060007, 15 mp fuse part no jcb71605706, 20 amp suse part no jcb 16050707, 5 amp fuse part no jcb71605703, 7 amp fuse part no jcb71605704, actuator 4wd switch part no jcb701 58822, actuator switch part no jcb70158826, front ) /bid number : gem/2026/b/7404118 * /dated: 31-03-2026 & & / bid document 1 / 64

Aluminum Bar Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector