Latest aluminum die Tenders | Government aluminum die Tenders

State Government

CTN :45445480

12 Jun, 2026 5.78 Lacs

Kollam - Kerala

Tender For deposit-shabda surabhi smart class rooms-mynagappally gramapanchayat-supply and installation of electronic equipments for arranging sabda surabhi smart class rooms in 6 govt. lp schools at mynagappally gramapanchayat, kollam.-general electronics work - public address system, od156085/2025-2026:supply and installation of desktop paging microphone with multi tone chime having flexible 30 cm gooseneck, frequency response minimum 50-10,000hz, sensitivity 2.0mv/pa or better, low noise cable with phone plug, supplied with 2x1.5v(um-3) pencil cells, aluminum die cast top and special high reliability switches with integrated led indicator etc. 3 year warrantypreferred make- ahuja, bogen, bosch, studiomaster., od156086/2025-2026:supply and installation of wall mount compact, high fidelity speaker - having rated power 30watts (30w / 15w / 7.5w / 3.75w), frequency response - 100hz to 20khz, sensitivity - 88 3db (1w, 1m), 5 inch woofer and 1 inch tweeter etc. warranty-3 yearspreferred make - studiomaster, ahuja, dynatech or equivalent , od156212/2025-2026:supply and installation of professional 19 inch rack mounted pa amplifier having minimum 4 balanced mic/line inputs (combo jacks), 1 auxiliary input, bass/treble and master controls, low cut switch, led indicators for power on, signal and clip, pre out and amp in (send/return), auxiliary line out, 160w rms, at 1 percent threshold, operating on ac 220-240v, 50hz/dc 24v/ dc and having 50-15000 hz 3db , speaker outputs of 4, 8, 16 ohms at 70v and 100v, built-in mp3 player warranty. 3 years. preferred make- ahuja, studio master or equivalent , od156243/2025-2026:supply and installation of professional 19 inch rack mounted pa amplifier having minimum 3balanced mic/line inputs (combo jacks), 1 auxiliary input, bass/treble and master controls, low cut switch, led indicators for power on, signal and clip, pre out and amp in (send/return), auxiliary line out, 80w rms, at 1percent threshold, operating on ac 220-240v, 50hz/dc 24v/ dc and having 50-15000 hz 3db , speaker outputs of 4, 8, 16 ohms at 70v and 100v, built-in mp3 player warranty. 3 years. preferred make- ahuja, studio master or equivalent , od156348/2025-2026:supply and installation of 16 channel zone selector with provision for switching a 100v audio signal to one or more of up to 16 zones.1 x 100v input, 16 x 100v outputs, manually switchable, built in relay for all call. preferred make: ahuja or equivalent warranty 3 years., 1.17.2:supplying and drawing following sizes of frls pvc insulated copper conductor, single core cable in the existing surface / recessed steel/ pvc conduit as required.2 x 1.5 sq. mm, 1.21.1:supplying and fixing of following sizes of medium class pvc conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm, od158699/2025-2026:supply and installation of necessary electrical accessories for giving proper electrical power to the rack - warranty 3 years., od158700/2025-2026:supply and installation of wooden rack for placing amplifier, cordless receiver and mixer unit.

CTN :45392542

04 Jun, 2026 NA

Rourkela - Odisha

Tender For corrigendum : supply of 150 watt industrial led highbay light 14250 lumens, 5000 k color temperature in epoxy black powder coated extruded aluminum housing after phosphochromate treated, cable entry via with pg gland for maintaining ingress protection, suspended by means of heavy duty aluminum diecast hook provided with the fixture and wiring , specification shall be as per pcee/grc's latest specification including wiring . make: goldwin, philips, havells, bajaj or equivalent. [ warranty period: 72 months after the date of delivery ] ]

CTN :45409709

04 Jun, 2026 NA

Rourkela - Odisha

Tender For supply of 150 watt industrial led highbay light 14250 lumens, 5000 k color temperature in epoxy black powder coated extruded aluminum housing after phosphochromate treated, cable entry via with pg gland for maintaining ingress protection, suspended by means of heavy duty aluminum diecast hook provided with the fixture and wiring , specification shall be as per pcee/grc's latest specification including wiring . make: goldwin, philips, havells, bajaj or equivalent. [ warranty period: 72 months after the date of delivery ] ]

CTN :45063494

01 Jun, 2026 NA

Bhawanipatna - Odisha

Tender For corrigendum : supply of cnc tools c c - shank twist drill- dia 8.2 , parallel shank twist drill- dia 8.3 , parallel shank twist drill- dia 8.4 , parallel shank twist drill- dia 8.5 , parallel shank twist drill- dia 8.6 , parallel shank twist drill- dia 8.8 , parallel shank twist drill- dia 9 , parallel shank twist drill- dia 9.4 , parallel shank twist drill- dia 9.5 , parallel shank twist drill- dia 9.6 , parallel shank twist drill- dia 9.7 , parallel shank twist drill- dia 9.8 , parallel shank twist drill- dia 9.9 , parallel shank twist drill- dia 10 , parallel shank twist drill- dia 10.1 , parallel shank twist drill- dia 10.2 , parallel shank twist drill- dia 10.5 , parallel shank twist drill- dia 10.6 , parallel shank twist drill- dia 10.8 , parallel shank twist drill- dia 10.9 , parallel shank twist drill- dia 11.4 , parallel shank twist drill- dia 11.5 , parallel shank twist drill- dia 11.8 , parallel shank twist drill- dia 12 , parallel shank twist drill- dia 12.2 , parallel shank twist drill- dia 12.4 , parallel shank twist drill- dia 12.5 , parallel shank twist drill- dia 12.6 , parallel shank twist drill- dia 12.8 , parallel shank twist drill- dia 12.9 , parallel shank twist drill- dia 13 , hss center drill- a3.15 x 8 , hss center drill- a2.5 x 6.3 , hss center drill- a4x10 , hss center drill- a5x12.5 , hss center drill- a6.3x16 , hss center drill- a2x5 , hand reamer- 4h7 , hand reamer- 5h7 , hand reamer- 6h7 , hand reamer- 8h7 , hand reamer- 10h7 , hand reamer- 12h7 , hand reamer- 14h7 , hand reamer- 16h7 , hand reamer- 20h7 , machine reamer- 16h7 , machine reamer- 18h7 , machine reamer- 20h7 , machine reamer- 3h7 , hand tap set- m4 x 0.7 , hand tap set- m5 x 0.8 , hand tap set- m6 x 1 , hand tap set- m8x1.25 , hand tap set- m10 x 1.50 , hand tap set- m12 x 1.75 , hss dies and die nut- m4 x 0.7 , hss dies and die nut- m5 x 0.8 , hss dies and die nut- m6 x 1 , hss dies and die nut- m8x1.25 , hss dies and die nut- m10 x 1.50 , hss dies and die nut- m12 x 1.75 , hss dies and die nut- m14 x 2 , hss dies and die nut- m16 x 2 , hss dies and die nut- m18 x 2.5 , hss dies and die nut- m20 x 2.5 , end mill cutter-solid carbide, dia - 3 , end mill cutter-solid carbide, dia - 4 , end mill cutter- solid carbide, dia - 5 , end mill cutter-solid carbide, dia - 6 , end mill cutter-solid carbide, dia - 8 , end mill cutter-solid carbide, dia - 10 , end mill cutter- solid carbide, dia - 12 , slot drill - solid carbide, dia - 5 , slot drill - solid carbide, dia - 6 , slot drill - solid carbide, dia - 8 , slot drill - solid carbide, dia - 10 , ball nose cutter-solid carbide, dia - 12 , ball nose cutter-solid carbide, dia - 10 , ball nose cutter-solid carbide, dia - 8 , ball nose cutter-solid carbide, dia - 6 , ball nose cutter-solid carbide, dia - 4 , chamfer end mill-solid carbide, dia - dia 10x90 degree , wood ruff cutter-hss, 19.5x6 , dove tail cutter-hss, 30x45 degree , lapping paste, 1 pkt - 400grm , round die handle - 1 inch , round die handle - 13 by 16 inch , round die handle - 1 and half inch , remear and tap handle - small , remear and tap handle - medium , remear and tap handle - large , dead blow hammer - 2lbs , oil stone triangular - 1 by 4 inch x 6 inch , parallal clamp - 6 inch , parallal clamp - 4 inch , dowel pin - dia 8x 50mm , dowel pin - dia 8x 100mm , dowel pin - dia 6x 45mm , dowel pin - dia 6x 30mm , dowel pin - dia 6x 50mm , toolmaker vice pin type - tmvp100 , goose neck clamp - ngc12 , //bid details 2 / 94 stepped strap clamp - nssc12-100 , moulding clamp- with clamping t-bolt and flanged nut - nmc-12t , step block - nsb-2 , adjustable supports plates - nasp-250 , single point cutting tool blank-hss - 1 by 2 inch x 1 by 2 inch x 6 inch , single point cutting tool blank-hss - 1 by 4 inch x 1 by 4 inch x 6 inch , face mill cutter - ygrd12-80z7c27b , face mill cutter - ygrd12-63z6c22b , face mill inserts - rdkt 12 04 mo

Central Government/Public Sector

CTN :45240913

22 May, 2026 NA

Jhansi - Uttar Pradesh

Tender For supply of unbranded ms industrial tabular cooling fan (man coolers) with robust ms stand, air flow 63750 cmh, motor 3 hp, sweep 900mm, 6 nos aluminum die cast wings, 3 ph 440v, 1440 rpm, vibration freebase with adjustable screw for surface balancing. brand: na. [ warranty period: 30 months after the dateof delivery ] ]

Central Government / Public Sector

CTN :44992402

05 May, 2026 NA

Rajahmundry - Andhra Pradesh

Tender For supply of wall mounted air circulator fan 450mm confirming to is 2997, working on 230v 1phase ac having 3 speed control, oscillating, adjustable tilt, aluminum die cast blades, minimum air delivery 125cum/min. makes: almonard, bajaj, havells, usha, crompton only. [ warranty period: 30 months after the date of delivery ]

Central Government And Public Sector

CTN :44634946

31 Mar, 2026 NA

Bengaluru - Karnataka

Tender For supply of hand held portable electric air blower, 1. rated voltage- 220v+-5%, 50hz ., 2. power outputminimum- 350 watt (full load), 3. blowing capacity 1.5 cubic meter per min, ,4. air velocity of more than 300 km per hour 5. weight of not more than 5kg 6. suitable for foundry industries, 7. aluminum die cast body 8. cable cord length: minimum 2 meters similar or equivalent to make: ralli wolf model- nwb [ warranty period: 12 months after the date of delivery ]

Central Government/Public Sector

CTN :44410705

09 Apr, 2026 NA

Hyderabad - Telangana

Tender For supply of nw 16 kf clamps made out of aluminum die cast with forged brass wing nut nw 25 kf clamps made out of aluminum die cast with forged brass wing nut nw 40 kf clamps made out of aluminum die cast with forged brass wing nut nw 50 kf clamps made out of aluminum die cast with forged brass wing nut nw 10/10 kf center ring made of stainless steel with viton o-ring nw 10/16 kf center ring made of stainless steel with viton o-ring nw 32/32 kf center ring made of stainless steel with viton o-ring nw 32/40 kf center ring made of stainless steel with viton o-ring nw 16 kf blank flange (dummy plate) made out of ss304 nw 32 kf blank flange (dummy plate) made out of ss304 nw 50 kf blank flange (dummy plate) made out of ss304 nw 40/40 kf center ring made of stainless steel with viton o-ring nw 50/50 kf center ring made of stainless steel with viton o-ring nw 40/50 kf adapter made of stainless steel iso kf 50 thermocouple feed through for high vacuum the assembly shall consist of the following: 1 no. isokf 50 mating flange to accommodate 4 no.s thermocouple housing flange material ss304 suitable holes to be made in the isokf 50 flange to accommodate thermocouple housing b. 4 no.sss304 thermocouple housings to suit viton tapered bush to be made these should be tig welded to iso kf 50 flange. c. 4 no.ssuitable ss nut, teflon sleeve, silicon/viton bush to suit 3.2 mm dia thermocouple complete assembly with silicon bush has to be vacuum tested upto 10 mbar. (3.2 mm dia thermocouple is in midhani scope) iso kf 50 thermocouple feed through for b&w vacuum annealing furnace the assembly shall consist of the following: a. 1 no. isokf 50 mating flange to accommodate 1 no. thermocouple housing flange material ss304 suitable hole to be made in the isokf 50 flange to accommodate thermocouple housing b. 1 no. ss304 thermocouple housing to suit viton tapered bush. this should be tig welded to

Aluminum Die Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government / Public Sector

Central Government And Public Sector

Central Government/Public Sector