Latest aluminum fabrication Tenders | Government aluminum fabrication Tenders

CTN :43140429

25 Dec, 2025 34.90 Lacs

Khetri - Rajasthan

Tender For - arc of electrical material. - electrical work :, providing & fixing of ik08, ip 66 protected led street light luminaire on existing bracket/pole. fixture made of powder coated single piece pressure die cast aluminum material with heat dissipation fins on housing with uv stabilized pc (uv stablization report submitted for uv cover ) /toughened glass cover and secondary lens on each led & should be smd type of 3 to 5 watt each . the system efficacy >=125 lm/ wt and potted driver & has a unique bis r number with input voltage ac 120 to 270 v ac with high voltage cutoff @>=300 v ac and auto resetting safety , power factor >0.95 driver efficiency >85% ,thd(i) 10% humidity 10% to 90% rh working temp -5c to 45c . driver current 750ma. the luminaire shall be bis certified and trade mark certified. life expectancy equal or more than 50000 burning hrs with minimum 70% lumen maintened , cri >70 and cct 5700k +355k. surge protection shall be min 4 kv internal and min 10 kv external inside driver compartment. driver should be phase to phase protection of 440 v for 4 hrs. manufactures word mark/name engraved/embossing on die cast housing to allow traceability/authenticity. fixture shall be as per is 10322 complianced.oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate/ report with liable warranty of product/accessories from oem shall be submitted. all as per pre approved by engineer in-charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . led street light fixture with minimum lumen output 5600 lm, supplying and drawing of xlpe insulated lt aerial bunched aluminium conductor cable confirming to is 14255/1995 and is 398 (pt-4)/ 1994 and as per discom specs. on existing cross arms through i hook with all necessary t&p required including binding and twisting etc. complete in all respect as required. all as per pre approved by engineer in-charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 1 x 25 sq. mm. + 1x25 sq. mm. (insulated), supply and fixing of 11 kv pin insulator confirming to is:731:1971 with latest ammendment on existing bracket including all accessories like ms forged hot dipped gi pin confirming to is 2486(part-i)/1993 & is:2486 (part-ii)/1989 with latest amendment, and as per latest discom specs. etc. as required. all as per pre approved by engineer in-charge.for additional technical parameters of product / work refer annexure a attached with this bsr, sitc of ip-42 and general construction confirming to is:8623 : 1993, wall/ free standing floor mounted dust and vermin proof compartmentalised cubical panel as specifications and other parameters required as per point (a) ,(b), (c),(d), (e), (f), (g), (h) as below:-(a)thickness of crca sheet shall be 2.0 mm, cable alley compartments having concealed hinged type doors with key type lock with / without detachable extension type structure. removable 3 mm. thick sheet steel gland plates with appropriate size of knockouts for cables shall be provided(b)complete panel shall undergo a process of degreasing, water rinsing, activation, derusting, pickling in acid bath, phosphatising & shall be subjected to nine tank process and then powder coated with approved shade of minimum 70 microns on both side of panel. the panel having pe foam/ neoprene rubber gasket of not less than 3mm thickness ,required hardware , concealed hinged door with key type locking arrangement for equipment/switchgear earthed with 2.5 sq.mm braided copper wire.[c) interconnection between bus bar and switchgears /cable shall be rigidly supported and made out by flexible copper wires (up to 63 amp ) and by solid bus bar (>63 amp ) . control wiring will be carried out with 1.5 sq.mm, earth wire with 2.5 sq.mm and ct with 2.5 sq.mm flexible copper wire only. all joints / interconnections of copper bus bar shall be dully tinned . c

CTN :43130988

31 Dec, 2025 NA

Delhi - Delhi

Tender For supply of extension of existing prefabricable shelter : : - extension of existing prefabricable shelter , three track windows two glass and one mess of powder coated aluminum of size 5 by 4 ft , three track windows two glass and one mess of powder coated aluminum of size 4 by 4 ft , openable powder coated aluminum window size 4 by 2 ft , main entrance double door of complex with upvc frames and toughened , upvc frame back side door with toughened galss 7 point 5 by 3 ft , upvc frame sliding doors with toughened , cemented vitrified tiles red colour 1 ft by 1 ft , cemented vitrified tiles red colour 1 ft by 1 ft work in front and rear of shelter , 2 by 2 ceiling light , stainless steel 304 grade grill pipe work covering of outside

Co-operative

CTN :43124823

24 Dec, 2025 42.00 Lacs

Mehsana - Gujarat

Tender For annual rate contract for aluminum and glass work at dudhmotisagar dairy-dharuhera.

CTN :43126528

24 Dec, 2025 3.33 Lacs

Sehore - Madhya Pradesh

Tender For water proofing and aluminum frame work of nrm building at janpad panchyat sehore

CTN :43102526

18 Dec, 2025 2.38 Lacs

Jaipur - Rajasthan

Tender For ward no. 21 in vidhadhar nagar in patak pachhad hanuman park sector 2 in installing open gym work - cross trainerproviding and fixing of cross trainer of size not less than 1140mm (length) x 625mm (width) x 1750mm. (height), to enhance the mobility of upper and lower limbs and improve the flexibility of joints. the main structure frame shall be made from g.i. pipe minimum of 80nb c class welded with m.s. round base plate at least 250 mm & 10mm thick. the handle frame shall be made up of at least 25nb c class g.i. pipe. the footrests shall be made from lldpe/aluminum casting material of size not less than 130 mm x 310mmx5mm thickness and mounted on m.s. plate of size 130mmx310mmx3mm thick. high tensile steel with galvanized nuts and bolts shall be used for assembly. the powder coating shall be done with pure polyester powders of ackzonoble/ berger/ nerolac paints with 60 to 70 micron thicknesses complete in all respect including fixing the m.s. holdfast in cement concrete to hold the whole structure, under the directions of engineer-in- charge to fulfill the functional requirement., seated pullerproviding and fixing of seated puller of size not less than 2400mm (length) x 800mm (width) x 2000mm. (height), to enhance the strength of upper limbs and the muscles in chest and back and promote cardio-pulmonary function. the main structure frame shall be made from g.i. pipe minimum of 100nb c class welded with m.s. round base plate at least 250 mm & 10mm thick. the handle frame shall be minimum of 32nb c class g.i. pipe. the seat frame minimum of 50nb c class g.i. pipe, closing caps shall be made up of lldpe/high quality fiber reinforced plastic material. high tensile steel with galvanized nuts & bolts shall be used for assembly. the powder coating shall be done with pure polyester powders of ackzonoble/ berger/ nerolac paints with 60 to 70 micron thickness complete in all respect including fixing the m.s. holdfast in cement concrete to hold the whole structure, under the directions of engineer-in-charge to fulfill the functional requirement., chest pressproviding and fixing of chest press of size not less than 2200mm (length) x 800mm (width) x 2000mm. (height), to enhance the strength of upper limbs and the muscles in chest & back and promote cardio pulmonary function. the main structure frame shall be made from g.i. pipe minimum of 100nb c class welded with m.s. round base plate at least 250 mm & 10mm thick. the handle frame shall be made up from at least 32nb c class g.i. pipe. the seats and back rests to be fitted on the outer frames shall be made up of m.s. sheet of size not less than 330mm x 300 mmx2mm thickness. closing caps shall be made up of lldpe/high quality fiber reinforced plastic material. high tensile steel with galvanized nuts & bolts shall be used for assembly. the powder coating shall be done with pure polyester powders from ackzonoble/ berger/ nerolac paints with 60 to 70 micron thickness complete in all respect including fixing the m.s. holdfast in cement concrete to hold the whole structure, under the directions of engineer-in-charge to fulfill the functional requirement., pommel horseproviding and fixing of pommel horse of size not less than 2150mm (length) x 800mm (width) x 800mm. (height), to enhance the flexibility of lower limbs, waist and abdomen. the main structure frame shall be made from g.i. pipe minimum of 80nb c class welded with m.s. round base plate at least 250 mm & 10mm thick. the handle frame be minimum of 32nb shall be made from c class g.i. pipe. closing caps shall be made up of high quality fiber reinforced plastic material. high tensile steel with galvanized nuts and bolts shall be used for assembly. the powder coating shall be done with pure polyester powder ackzonoble/ berger/ nerolac paints with 60 to70 micron thickness complete in all respect including fixing the m.s. holdfast in cement concrete to hold the whole structure, under the directions of engineer-in-

CTN :43114690

16 Dec, 2025 NA

Mumbai - Maharashtra

Tender For supply and installation of miscellaneous electrical items for g+5 storied office building at 149, jakeria bunder road, sewri, mumbai-400015 - "supplying and erecting hms pvc conduit frls grade 25 mm dia. with necessary accessories like pull box, clamps, self tapping masonry screws etc. concealed in wall/floor with chiselling appropriately complete in all respect.", "supplying and erecting hms pvc conduit frls grade 20 mm dia. with necessary accessories like pull box, clamps, self tapping masonry screws etc. concealed in wall/floor with chiselling appropriately complete in all respect.", "supplying and erecting hms pvc conduit frls grade 32 mm dia. with necessary accessories like pull box, clamps, self tapping masonry screws etc. concealed in wall/floor with chiselling appropriately complete in all respect.", supplying and erecting of gi box for concealed type 1 module switch box duly erected flush to wall with required chiselling and finishing with cement mortar / pop as per required to match the background., supplying and erecting of gi box for concealed type 2 module switch box duly erected flush to wall with required chiselling and finishing with cement mortar / pop as per required to match the background., supplying and erecting of gi box for concealed type 3 module switch box duly erected flush to wall with required chiselling and finishing with cement mortar / pop as per required to match the background., supplying and erecting of gi box for concealed type 4 module switch box duly erected flush to wall with required chiselling and finishing with cement mortar / pop as per required to match the background., raceways , under floor trunking, supply and installation of totally concealed underfloor race-ways as approved by bl eic. the channels shall be fixed to the floor with aluminum strips so that there is no movement of the channels when civil work(pouring of cement concrete) is being done. the channels shall be earthed at the boxes and at the joints with 14swg bare copper wire with screws so that earth is continuous. the channels shall be terminated at the junction boxes which shall be measured separately. refer section details rate to include civil works such as chasing the floor & reinstatement to final finish., nominal sizes:, 100 x 50 x 2.00mm anodised alum box section, 50 x 50 x 2.00mm anodised alum box section, , under floor trunking junction box, s & i of underfloor frame type gi junction box fabricated out of 16swg gi sheet steel without cover; box shall be painted with two coats of red oxide primer and two coats of synthetic enamel paint. cut outs shall be provided on the sides of the box to facilitate the entry of raceways as described above. ms cover shall be powder coated and fixed with underside fram to the under floor jb. jb shall be frame type and shall not bend if stepped on it, 300 x 300 x 50mm deep, 150 x 150 x 50mm deep, , s & i of 2.00mm thick cover plate for the junction box fabricated out of 2.00mm ms sheet steel and powder coated to approved shade with all fixing arrangements the size of the cover plate shall be 25mm more than the cover size of the junction box on all sides , , cover plate suitable for 300 x 300 x 50mm deep jb, cover plate suitable for 150 x 150 x 50mm deep jb

State Government

CTN :43117877

22 Dec, 2025 3.00 Lacs

Rajgarh-Mp - Madhya Pradesh

Tender For purchase of furniture items - officer table :- providing and supplying table of size 5 x2 6 x2 6 with c-frame leg 200 mm wide made of aluminum profile and crca formed section having provision for wire management. top made of 18 mm thick bwr plywood finish with 1.0 mm thick. laminate, wooden edge banding of edges. dotted embossed cable duct and with single drawer (w-350 mm, h-165 mm, d-475 mm) with branded telecopic channel. all steel components are epoxy powder coated after seven tanks. anti-corrosion., officer chair :- supply and placing high back revolving chair size total height 1030-1115 mm, depth 685 mm width 590 mm seat hight 425-510 mm, 5- prong nilony base for stability twin wheel heavy duty caster for easy mobility under load hot pressed plywood with steel t-nuts for rigid fasting seat and back are covered with pp cover, sturdy steel colum gas lift for center support and seat height adjustment, telescopic abs cover over steel colum low cable center tilt mechanism and with single piece integral center tilt mechanism and with single piece integral skin pu arm rest, quality tapestry high density molded pu cushion., staff chair :- supply and placing staff chair size total height 850 mm depth 570 mm, width 550 mm seat hi=eight 440 mm, uinder structure cantilever type ms crca tube 1.6 mm thick. hot pressed plywood with steel t-nuts for rigid fastening. single piece integarl skin pu arm rest. quality tapestry. high density pu molded cushion. all steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface., waiting chair :- supply and placing waiting three seater fixed chair, size ; total length 1800 mm, total height 750 mm, total depth 630 mm and seat height 410 mm, made of ms crca press formed seat components duly seamless welded to get proper finish chrome plated handles & base. steel perforated ms moulded one piece seat and back fitted in moulded chrome plated side strips, three individual seat fitted on ms tube support of 75 mm x 35 mm, seat and bottom support are powder coated., computer table :- supply and fixing in position computer table (work station) having size length 900 mm, width 600 mm, height 760 mm, c-frame & tubular crca steel structure, fabrication involves only mig/tig & spot welding. top & shelf made of 18 mm thick bwr plywood finish with 1.0 mm thick. laminated, wooden edge banding of edge, shelf adjustable on steel brackets. removable tubular cpu stand and an embossed modesty panel below table top provided. provision for wire management, drum type leveler. all steel components are epoxy powder coated after seven tanks anti corrosion treatment of surface., plastic chair:- plastic arm chair for office, godrej almira :- godrej interio almira slim size 2 door steel almira, 4 shedves, size length 1828 mm, width 914 mm, water cooler :-cooling capacity- 5 ltr./hr.number of taps- 2color- whiteweight- 10 kg., cash counter:-office reception table & cash counter desk of woodenproduct dimensionslength 48 , width 24 , height 36 approx., record rack :-material- mild steelno. of shelves- 5 shelvesmount type- finish type color- greyusage/application- officerack type- open rackappearance- modernproduct type- pre standing unitassembly required- no, bench :- product dimensions12d x 48w x 18h centimetersmaterial- stainless steekframe material- stainless steelcolour- silverstyle- antiquesize- 48"l x 12.3"w x 18"h overall size: 48"l x 12.3"w x 18"h, digital electronic safe locker for office with auto lock function, anti-theft alarm and led displays size length 500 mm width 350 mm

CTN :43026470

17 Dec, 2025 12.49 Lacs

Jalandhar - Punjab

Tender For corrigendum : supply of repair and upgradation of troops waiting area at army enviromental park : : -replacement of existing roof of structure , ms square pipe and ms flat bar , repair of outer walls of structure , rain drainage pipe , electrical work , paint work complete , fitting of aluminum windows and doors for ventilators