Latest aluminum ladder Tenders | Government aluminum ladder Tenders

Central Government/Public Sector

CTN :45436216

15 Jun, 2026 NA

Amla - Madhya Pradesh

Tender For supply of set of tools and equipment required for road art/brake down amla (details as per annexure). test certificate should be from nabl approved lab only. - unbranded cantilever tool box, 5 trays, tommy bar octagonal. size- 20mm x 600 mm long., material en8 as per attached drawing., hammer sledge double faced 3.2kgs is:841/1968 table-iii., ball pein hammer with handle conforming to is 841:1983 with latest amendments, specification: nominal mass-500 grams, handle- wood/polymer/fiberglass, material spec: steel grade t65/t70; handle length: maximum 350 mm but shall not be less than 300 mm., adjustable spanner 8", adjustable spanner 12", adjustable spanner 15", set of adjustable spanners & pipe wrenches of sizes 1) adjustable spanner size 10 inch/250mm qty/set-01 no 2) adjustable spanner size 15 inch/375mm- qty/set-01 no 3) pipe wrench size 24 inch/600mm- qty/set1no makes: fwrad0002-d & fwrrt0001-d of eastman or its equivalent of snapon, kingtony, taparia, or venus., wrench pipe chain capacity range 10 - 60,15-90,27 - 115,35-165, steel shovel with metal handle as per drawing number rwf/misc/m/1294, safety goggles designed to effortlessly fit over most prescription spectacles for convenience, temple adjustability enhances personalized fit and ergonomic, rigorously tested for optical quality, ignition resistance and high temperature durability, sterilized and fortified, ensuring technical durability and robustness, durable, clear, and scratch-resistant lens for precision optics and protection, lens scale no. clear:3-1.2, weight: approximately 54 grams, embodying lightweight precision in technical design, certified to en 166:2001 conforms to ansi 87.1-2010., accepted makes: karam es007 or black & dcor or 3m or midas or similar. accepted note: one sample to be got approved before bulk supply., magnifying glass with stand, lens size- 5", magnification- 4x area, 3.2 dioptre lens, reachstand internal concealed, spring mechanism with 900 mm reach from pivot and 600 mm in vertical plane reach from pivot 36" and 600 mm in vertical plane 24", illumination i) led ring with 40 leds in twin rings. ii) power consumption- 8 watts. iii) lumen output- 800lumens. iv) colour temperature-6000 degree kelvin v) nominal lux level at working plane 150 mm-2300 lux. along with accessories for each stand. i) increased magnification attachment dia -50 mm powerful additional lens that can swiung in the field view under the main lens. ii) spot lens dia-30 mm powerful additional lens that is permanently fused on the main lens to provide 16 x area magnification. brand- lensel optics model no - l104sd / greemito/toolstar, measuring tape with lock button size-5 meter (length) x 13 mm (width) case material-abs, blade material-carbon steel, case shape - round, tape colour-, black and white steel measuring tape 30 meter long graduated in mks & fps system to the fractions readable in mm & inch marking in full length of is certified company only, 15 cm spring steel scale, supply of manila rope of size 1 inch as per is:9936(1992). (note: required rope material is polymer braided twisted cord twine string in dia: 12mm) (required in 25mtr +25mtr sapratly), aluminum ladder 6 ft long, sand bucket, water bucket gi

Central Government/Public Sector

CTN :45430587

25 Jun, 2026 2.47 Lacs

Raipur - Chhattisgarh

Tender For provn of steel stair case at p-45 of naya raipur mil stn

corporations/Associations/Others

CTN :45261588

08 Jun, 2026 NA

Anpara - Uttar Pradesh

Tender For corrigendum : providing of operation and maintenance power house / power plant - maintenance of slop from platform to pit for pipeline support and construction of stair through steel structure at gorbi mines pit no 03

State Government

CTN :45398927

12 Jun, 2026 29.65 Lacs

Malappuram - Kerala

Tender For pcc work for foundation bed for column footing. rcc work for column footing and shuttering work for foundation steel work for stair work . m.s tube and stainless steel handrail work for stair.

State Government

CTN :45382897

08 Jun, 2026 13.48 Lacs

Faridabad - Haryana

Tender For dnit name : repairing of plaster work and providing and laying vitrified floor tiles, water proofing, floor mounted, pcc, flush door shutters, paint work, sanitary work in house no.1413, 1414, 1415 and 146 in sector-15 faridabad and all other works contingent thereto. chargeable head - annual maintenance of hsvp staff quarters in sector-15 and 15a, faridabad for the year 2026-27. - [10.1]providing and laying of base course of floors consisting of 100 mm thick cement 1:8:16 and 100 mm sand or stone filling., [10.109]providing and laying gang saw cut 30 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of engineer-in-charge., [10.67.1]providing and laying vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to i.s. 15622, of approved make, in all colours and shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement and matching pigments etc. complete. 1. size of tile 500x500 mm, [11.5.3]12 mm cement plaster of mix : 3. 1:4 (1 cement: 4 fine sand), [11.6.2]15 mm cement plaster on the rough side of single or half brick wall of mix : 2. 1:6 (1 cement: 6 fine sand), [11.64.1]distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : 1. new work (two or more coats) over and including water thinnable priming coat with cement primer, [11.96.1]finishing walls with premium acrylic smooth exterior paint with silicone additives of required shade: 1. new work (two or more coats applied @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm), [12.157.1.2]providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate z sections and other sections of approved make conforming to is: 733 and is: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required epdm rubber/ neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / panelling, c.p. brass / stainless steel screws, all complete as per architectural drawings and the directions of engineer-in-charge. (glazing, panelling and dash fasteners to be paid for separately) : 1.2. for fixed portion powder coated aluminium (minimum thickness of powder coating 50 micron), [12.159.2]providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with epdm rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (cost of aluminium snap beading shall be paid in basic item): 2. with float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm), [13.29.1]steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 1. in stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete, [13.44]providing and fixing circular/ hexagonal cast iron or m.s. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick m.s. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ m.s. sheet box by means of

CTN :45367027

08 Jun, 2026 NA

Panchkula - Haryana

Tender For supply of digital verniar calliper 200mm , digital micrometer in inches size 100 to 125 , digital verniar calliper 300mm , digital weighing scale slid base back 50 kgs , digital micrometer in inches size 125 to 150 , digital casti sunshine tester , table vice wench fined type s 3-8 , auto folding aluminum ladder 25mm dia 8 , self supporting extendable telescopic lower type aluminum ladder 20 to 36 , digital varniar caliper 150mm , digital micrometer in inches size 0 to 25 , digital clamp meter , digital multimeter , general trimtree folding aluminum ladder , hand trolley , paper shredder , general purpose folding aluminum ladder 63mm , battery 24v 150 ah make exide , frp wall support ladder size 4 mtr , book case size 66 x 33 x15

Central Government/Public Sector

CTN :45324560

16 Jun, 2026 85.78 Lacs

Visakhapatnam - Andhra Pradesh

Tender For project supply, installation, testing and commissioning of 20nos radar and accessories. sh civil works at yarada visakhapatnam phase-ii - extra for concrete work in superstructure above floor v level for each four floors or part thereof by mechnical means., reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-iii) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)., steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. a) thermo- mechanically treated bars of grade fe-500d or more., centering and shuttering including strutting, propping etc. and removal of form for lintels, beams, plinth beams, girders, bressumers and cantilevers, brick work with non modular fly ash bricks conforming to is:12894, class designation 10 average compressive strength in super structure above plinth level up to floor v level in :cement mortar 1:4 (1 cement : 4 coarse sand), providing and fixing ist quality ceramic glazed wall tiles conforming to is: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer-in-charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete., float glass panes 4 mm thick glass pane (weight not less than 10kg/sqm)., providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with isi, is : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete., providing and fixing is : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete :125x64x1.90 mm, fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately), providing and fixing factory made single extruded wpc (wood polymer composite) solid door/window/clerestory windows & other frames/chowkhat comprising of virgin pvc polymer of k value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying pvc solvent cement and screwed with full body threaded star headed ss screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 n (face) & 1100 n (edge), minimum compressive strength of 58 n/mm2, modulus of elasticity 900 n/mm2 and resistance to spread of flame of class a category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with m.s hold fast/lugs/ss dash fasteners of required dia and length complete as per direction of engineer-in- charge. (m.s hold fast/lugs or ss dash fasteners shall be paid for separately). frame size 45 x 70 mm, providing and fixing factory made single extruded wpc (wood polymer composite) solid plain flush door shutter of required size comprising of virgin polymer of k value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 n (face) & 900 n (edge), minimum compressive strength 50 n/mm2, modulus of elasticity 850 n/mm2 and resistance to spread of flame of class a category with property of being termite