Latest aluminum painting Tenders | Government aluminum painting Tenders

CTN :40609976

26 Jun, 2025 NA

Bareilly - Uttar Pradesh

Tender For supply of plywood for general purpose bwr-aa 7 ply , plywood for general purpose mr aa-9 ply , plywood general purpose wwr ab - 9 ply 240 , paint rfu priming red oxide , thinner for synthetic paints

Central Government/Public Sector

CTN :40595575

24 Jun, 2025 NA

Uttarakannada - Karnataka

Tender For supply of - paint dark grey , paint fluorescent green , paint finishing for inter deck white , paint epoxy alluminium primer , paint priming coal tar epoxy black , paint black heat resistant , paint black enamel , paint azure blue , paint alluminium heat resistant , paint epoxy red oxide primer , paint rfu inter deck , paint red oxide , paint green , paint remover non-inflammable , paint signal red , paint pale cream fire resistant , paint olive green primer , paint navy blue , paint fluorescent yellow , paint fluorescent red , paint white enamel , paint rfu priming red lead , paint golden yellow , paint silver

CTN :40584852

03 Jul, 2025 5.93 Lacs

Ujjain - Madhya Pradesh

Tender For maintence work in ward 31 - all kinds of soil, 1:3:6 or richer mix, cement concrete grade m-10 (nominal mix) with 20 mm maximum size of stone aggregate, cement concrete grade m-20 (nominal mix) with 20 mm maximum size of stone aggregate., hot rolled deformed bars, "foundations, footings, bases of columns, etc. for mass concrete.", red sand stone, moorum/hard copra, crusher stone dust, painting steel work with deluxe multi surface paint to give an even shade. two or more coat applied @0.90 ltr/, "in gratings, frames, guard bar, ladder, railings, brackets, gatesand similar works.", new work (two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer appl, hot finished welded type tubes.

Central Government/Public Sector

CTN :40448366

04 Jun, 2025 1.10 Lacs

Kanpur - Uttar Pradesh

Tender For corrigendum : supply of paint rfu priming red oxide of iron zinc-chromate, universal, syathetic (brushing/spraying) ds cat no.

State Government

CTN :40565889

13 Jun, 2025 NA

Ahmedabad - Gujarat

Tender For tender for providing construction material supplies for financial year 2025-26-, item no- 1 supplying common bunt clay bricks conventional size, item no- 1 supplying common bunt clay modular bricks 20x10x10 size, item no- 2 supplyion of 53 or 43 grade open on pipe cement of isi approved brand, item no- 3 supplying of fine sand on sie, item no- 3 supplying of corse sand on sie, item no.4 providing and fixing 35 mm thick shutter for door and window and clear story window including anodised alluminium butt hinges with necessary screws.(a) indian teak wood.(ii)fully panelled, item no. 5 providing 25 mm thick for cupboards etc including black enamelledd m.s.butt hinges with necessary screws. partly panelled & partly glaged with iron hinges,, providing and fixing glazed louvered glass window and ventilation with teak wodd frame 10 com x 7 cm size incl. 3 coat of oil painting to wood work etc., item no- 7 supplying rough kota stone 25 mm thick, item no- 8 supplying of glazed times of 15 x 15 x 6 cm size or approve size, item no- 9 supplying of vitrified tiles 24 x 24 size antiskid, item no- 10 supplying of dry distember primer, item no- 11 supplying of distember primer, item no- 12 supplying of water proof cement paint, , supplying of birla well care putty, supplying of plastic emulasion paints, item no- 13 suplying of indian type squating pan w.c., item no- 14 supplying of urinol, item no- 15 supplying of upvc pipe (a)20 mm dia, item no- 15 supplying of upvc pipe (a)15 mm dia, item no- 15 supplying of upvc pipe (b) 32 mm dia, item no- 15 supplying of upvc pipe (b) 25 mm dia, item no- 15 supplying of 6 kg/ cm2 pvc pipe (c) 110 mm dia, item no- 15 supplying of 10 kg/ cm2 pvc pipe (c) 110 mm dia, item no 16 supplying of 100 mm dia, 60cm long ston ware pipe, item no 16 supplying of 160 mm dia upvc, pipe, item no- 16 supplying of brass screw down bib tap of 15 mm dia, item no- 17 supplyin of c i nahni trap, item no- 17 supplyin of pvc swr gully trap 160x110, item no- 18 supplying of pvc water tank of approved make, item no- 19 supplying of 32 mm gun metal valve, item no-20 c i cover with frame size 500/700, item no-21 c i cover with frame size 300/300, item no 23 supplying of tmt bars fe415 rinforcment for rcc work, item no - 24 supplying of stainless steel glosy asis 304 grade 1mm thick with over all size 610x460 mm and bowl size560x410x200, supplying of 30 mm thick factory made solid panal pvc door stter, part-2, item no- 22 supplying of paver block mk 250 grade 60 mm thi, item no- 23 supplying of curve, part-3, item no.-24 supplying of np-2 non pressare pipe (a)150 mm dia, item no.-24 supplying of np-2 non pressare pipe (b)300 mm dia, item no.-24 supplying of np-2 non pressare pipe 450 mm dia, item no.-24 supplying of np-2 non pressare pipe (d)600 mm dia, item no.-24 supplying of np-2 non pressare pipe (e)900 mm dia, item no.-24 supplying of np-2 non pressare pipe (f)250 mm dia, item no.-25 supplying of np-3 non pressare pipe (b)300 mm dia, , item no.-25 supplying of np-3 non pressare pipe (b)450 mm dia, item no.-25 supplying of np-3 non pressare pipe (b)600 mm dia, item no.-25 supplying of np-3 non pressare pipe (b)900 mm dia, part-4, item no- 26 supplying of 10mm aggregate, item no- 26 supplying of 20mm aggregate, item no- 26 supplying of 40mm to 63mm aggregate, item no- 26 supplying of stone dust, through and bond stone, supplying of rubble, part-5, item no- 27 supplyin of galvenised corrugated sheet 0.8 mm thick, gi j or l hook, item no- 28 supplying of galvenised mild steel tube 50 mm dia, item no - 32 steel work welded, in built up sections, framed work including cutting, hoisting, fixing in position and applying a priming coat of red lead paint (a) in beams and joists, channels, angles, tees, flats with connecting plates or angle cleats as in main & cross beamnship & jack rafters, purlins connected to common rafters and like., flat back wash basin color glazed 450x 300 size, providing and fixing extruded aluminium

CTN :40522831

18 Jun, 2025 NA

Pithoragarh - Uttarakhand

Tender For supply of surface dressing n exc 15 cm deepin hard oblique dense soil , excavating over areas not exceeding 1 point 5 m deep for foundations and getting out in hard oblique dense soil complete all as specified and directed , excavating over areas exceeding 1 point 5 m deep not exceeding 3 m deep for foundations and getting out in hard oblique dense soil complete all as specified and directed , excavating over areas exceeding 3 m deep for foundations and getting out in hard oblique dense soil complete all as specified and directed. , returning filling in including spreading and levelling and watering and well ramming in layers not exceeding 25 cm each , removing excavated material n exc 50m and depositing where directed at a level n exc 1 point 5 m above the starting point , m and l for hard core of gauge n exc 63 mm and deposeted and spread and levelled in layers n exc 15 cm thick and watered and rammed to a true surface complete all as specified and as directed , m and l cement concrete in fdn and 40 mm graded aggregate complete all as specified and as directed , m and l cement concrete 40 mm graded aggregate in sub base of flooring complete all as specified and as directed , m and l cement concrete 40 mm graded aggregate complete all as specified and as directed , m and l cement concrete 20 mm graded aggregate complete all as specified and as directed , m and l for rcc m30 reinforced cement concete design mix in foundation including rafts and footing and foundation beams and bases for column and etc basement slabs under reamed piles , m and l for mild steel tmt bar 10 mm dia and over cut to length and bent to shape required , m and l for mild steel tmt bar 8 mmn dia and overm cut to length and bent to shape required , m and l formwork to sides of rough finished flat surface of concrete foundations and footings and bases of colums and raft and raft beams and sides and sffits , m and l formwork to rough finished flat surface soffits of suspended slabs such as roof slabs and floor slabs and landing and similar work not exceeding 200mm thick horizontal or sloping all , m and l formwork to rough finished flat surface in sides and soffits of floor or roof beams and beam haunchings and girders and bressummers , formwork to faces of walls and retaining walls and butments and parapets and staircase railings and similar work including attached pillasters and buttresses , m and l formwork to edges of rough finished surfaces of concrete flats and trends and breaks in floors windows cills and concrete railing and openings in concrete walls and floor and roofs , m and l liquid water proofing compund , m and l for verified ceramic wall tiles light shade 10 mm thick square oblique rectangular polished and area of each tiles not exceeding zero point 36 sqm and in floors , m and l for verified ceramic non skid tiles light shade 10 mm thick square rectangular polished and area of each tiles not exceeding zero point 36 sqm , m and l for screed bed or bedding laver of mortar 15 mm thick for laying floor finished complete all as specified and as directed , m and l rendering 15 mm thick on wall on fair faces of bricks work or concrete surfaces complete all as specified and as directed , m and l rendering 10 mm thick on ceiling on fair faces of bricks work or concrete surfaces complete all as specified and as directed , m and l rendering 10 mm thick in on fair faces of bricks work or concrete surfaces complete all as specified and as directed , m and l preparing new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed , m and l for preparation of wall surfaces including priming coat and wall care putty and applying two coats of distemper oil emulsion , m and l for preparing new plastered surfaces of wall and applying two coats of cement based paint complete all as specified and as directed , s and f anodised aluminium window and ventilator shutters and side hung type without sash bars and al

CTN :40423805

05 Jun, 2025 NA

Darjeeling - West Bengal

Tender For corrigendum : construction of hardened amn bkr (30 mt ) under the aor of hq 27 mtn div - part i :concrete , plastering work and water proofing compoundpart ii : reinforcementpart iii : centering shuttering & formwork, pre-fabricated mild steel door of size 1100x1700mm outer frame made out of isa 40x40x6mm and door shutter frame of isa 35x35x5mm and all as stiffner of isa 30x30x3mm as per drawing, app bitumen membrane sheet of grade 2504 thickness 3.0mm type film, size 20mx1m, minumum weight 2.25kg/sqm,, polythene membrane sheet of grade 2504 thickness 150micron, hdpe sand bag of size 34 x14 inside insulated interlocking stitch weight of the bag is42-45 gram/bag, anti freezing compound approved by accepting officer / confirming to latest is standards, water proofing compound in 1 kg packing,, pre-fab steel jally made up of isa 30x30x3mm frame and cover frame made of 25x25x3mm and 10 mm dia bars in jally @ 25mm centre to centre bothways welded to frame of size 900x900mm complete all as per rfp & drg ., pre painted cgi sheet 2100mm x 800mm x 0.63mm,, 50mm thk pcc jumbo interlocking coloured tiles,each tile covering and area of 0.0264sqm (0.12mx 0.22m), confirming to is- 15658-2006, alkaline pipe 50mm dia., fire resistance paint for internal surface., fire resistance primer for internal wall surfaces, synthetic enamels painting to steel surfaces as specified., red oxide primer., bitumen 80/20 grade,, structural steel ismb300, 6.60 mtr length (roof beam), shs 75x75x5mm 6.60 mtr length (roof beam), deck sheet-1.0mm tr-80 grade,350, 12mm thick ms base plate of size 0.30x0.30 mtr (column), 5mm thick ms plate of size 0.300x 0.40 mtr(90 degree angle), anchor bolt of 20mm dia,0.45mtr length, hdpe pipe(rain water pipe) 75mm dia best quality, hdpe hose pipe 25mm dia (bore) corrosion resistant for water supply pumping water with min thickness of 0.25mm with working pressure 14.22 psi and bursting pressure 28.44 psi., 1hp petrol water pump of capacity 35cc 4 stroke pertol engine 25mm self priming water pump set. make : kirloskar, crompton, honda and quivalent., fire extinguisher a/b/c type portable net 2 kg capactiy cylindrical isi marked (bis 15683 : 2006 range > 2 mtrs (minimum) with discharge pipe & nozzle complete and suitable bucket for hanging on wall., lighting conductors set complete with all accessories as per details given below:-(a) zinc & alloy coated safe earthing electrode (76.3mm dia) 2mtr long with back filled compound conduct lite - 2 bags cpri approved.(b) air terminal four pointed aluminium rod 12mm dia and 600mm long fitted on gi pipe.(c) gi pipe med grade 06 mtr long 40mm dia. make: tata/ jindal/ bansal.(d) epoxy insulator with screw 10 nos.(e) copper cable 35 sqmm multi-stranded single core. make : plaza/ havells/ rallison/ isi-10 r/m.(f) testing points terminal box made out of gun metal or phosphorous of size 75 x 75 x 25mm with screw.(g) nut & bolts 2" x 1/2" - 08 nos(h) foundation nuts & bolts 16mm x 400mm - 4 nos(j) frp earthing pit with cover -01 nos(k) copper lugs 35 sqmm for connection of cable with nut & bolt of suitable size - 02 nos, electric earthing set complete with items as given below :-(a) gi earthing plate 600mm x 600mm x 6mm thick with two nos holes - 01 no.(b) gi pipe15mm dia light grade for the protection of gi wire, make : tata/jindal/prakash - 8 mtr.(c) gi pipe 20mm light grade for watering, make : tata/jindal/prakash - 1.2 mtr.(d) gi wire 4mm dia - 02 kgs.(e) gi funnel with wire mesh suitable for 20mm dia gi pipe - 1 no(f) common salt - 50 kgs.(g) frp earthing pit with cover - 01 no.(h) gi nut bolt with washer of size 10mm dia 25mm long - 2 nos. (h) charcoal - 50 kgs., supply and installation solar lantern model no ms122 solar lantern contains battery , solar pannel, led bulbs and automatic charging of working time 25 hours and led life time 40000 hrs , solar pannel of 5w li-ion type battery 2200 mah capacity of volt 7.4v, supply and installation luminous solar inverter

Central Government/Public Sector

CTN :40267405

02 Jun, 2025 NA

Ganjam - Odisha

Tender For corrigendum : supply of cns items - hand wash liquid , glass cleaner 500 ml , cotton rags , cotton waste , brush sweeping hand , polish metal brass , duster cloth , sponge cloth , broom country , cleaner white toilet harpic , brown paper sheet laminated , paint roller 4 inch , paint roller 7 inch , paint roller 9 inch , paint roller 6 inch , paint brush 4 inch , paint brush 2 inch , refill automatic air freshener 250ml , room freshener , pest seal , abrasive paper 250mm x 280mm , photocopier a3 , candle wax , teflon tape , tape insulation 25 mm steel grip , wonder tape 2 inch , tape transparent 2 inch , tape transparent 1 inch , toilet paper , photocopier paper 210mm x 297mm a4 , bag biodegradable for garbage , dustbin , detergent powder in 01 kg pack isi mark , deodriser odonil refil , soap liquid toilet , bag gunny , door mat synthetic , pencil cell aa , m seal , safety gloves cloth , scrubber pad , super mop refils , feather broom phool jhadu , cloth stocknite mutton cloth , torch cell aaa , cans plastic 10 ltrs , rat sticking gel , distilled water , naphthalene balls , plastic mug , dvd , envelop size 6 x12 inch , envelop size 4 x10 inch , hand towel , steel cleansing liquid , spin mop set , wiper long handle , cleaning bar for utensils 500 gms packs , brush with long handle , scrubber with handle , tube fluorescent , lamp cfl led , battery aa , corrosion inhibitor , jeer can 20 ltrs , quick dry steel putty , wet surface putty , paper napkin , varnish , paint epoxy red oxide primer , interchange 990 grey light grey , paint rfu priming red lid

Central Government/Public Sector

CTN :40529771

05 Jun, 2025 NA

Coimbatore - Tamil Nadu

Tender For supply of slide cover complete in set (made out of ms sheet with ci flaps) for electric point machine, each set comprising of 1. slide cover complete for drive rod and lock rod to drg. no.rdso/s.10848-a alt- 4/ptj with part drawings. as specified in assembly drawing-2 nos per set. 2. slide cover complete for dete ctor rod to drg no.rdso/s.10848-b alt-5/ptj with part drawings. as specified in the assembly drawing-2 n os per set. components shall be painted all over except on working surface with two priming coats, one of zinc chrome to is:104 followed by another of redoxide zinc chrome to is:2074 and a finish coat of dead bla ck paint to is:8662-2004 for both items 1 and 2 mentioned above. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40492165

16 Jun, 2025 1.85 Lacs

Dakshina Kannada - Karnataka

Tender For supply of paint red oxide , paint green , paint remover non inflammable , paint priming coal tar epoxy black , paint pale cream fire resistant , paint olive green primer , paint navy blue , paint golden yellow , paint fluorescent yellow , paint fluorescent red , paint roller refil 9 , paint roller refil 6 , paint rfu priming red lead , paint rfu inter deck , paint signal red , paint roller 9 , paint roller 7 177 8 mm c w artificial fur and handle , paint roller 6 , paint roller 4 , paint roller 12 , refill for automatic air freshner 250 ml , paint white enamel , polish metal brass , plastic mug , pest seal , xerox paper sizes 210 x 297 mm a4 80 gsm , polythene bag 14x16x75 micron , polythene bag 14x20x75 micron , petroleum jelly , paint silver , tape transparent w proof selfadhesive cellulose film 38mm wd , tape transparent 1 , synthetic foot mat 3 x 2 feet , soap toilet , soap hard yellow , room freshner , tape transparent 2 , spray hand liquid insecticide , soap liquid toilet , sand paper isi mark bid number/ & ( * ) : gem/2025/b/6276744 dated/ + : 26-05-2025 bid document/ 2 2 1 / 30

Aluminum Painting Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector