Latest aluminum panel Tenders | Government aluminum panel Tenders

State Government

CTN :45445480

12 Jun, 2026 5.78 Lacs

Kollam - Kerala

Tender For deposit-shabda surabhi smart class rooms-mynagappally gramapanchayat-supply and installation of electronic equipments for arranging sabda surabhi smart class rooms in 6 govt. lp schools at mynagappally gramapanchayat, kollam.-general electronics work - public address system, od156085/2025-2026:supply and installation of desktop paging microphone with multi tone chime having flexible 30 cm gooseneck, frequency response minimum 50-10,000hz, sensitivity 2.0mv/pa or better, low noise cable with phone plug, supplied with 2x1.5v(um-3) pencil cells, aluminum die cast top and special high reliability switches with integrated led indicator etc. 3 year warrantypreferred make- ahuja, bogen, bosch, studiomaster., od156086/2025-2026:supply and installation of wall mount compact, high fidelity speaker - having rated power 30watts (30w / 15w / 7.5w / 3.75w), frequency response - 100hz to 20khz, sensitivity - 88 3db (1w, 1m), 5 inch woofer and 1 inch tweeter etc. warranty-3 yearspreferred make - studiomaster, ahuja, dynatech or equivalent , od156212/2025-2026:supply and installation of professional 19 inch rack mounted pa amplifier having minimum 4 balanced mic/line inputs (combo jacks), 1 auxiliary input, bass/treble and master controls, low cut switch, led indicators for power on, signal and clip, pre out and amp in (send/return), auxiliary line out, 160w rms, at 1 percent threshold, operating on ac 220-240v, 50hz/dc 24v/ dc and having 50-15000 hz 3db , speaker outputs of 4, 8, 16 ohms at 70v and 100v, built-in mp3 player warranty. 3 years. preferred make- ahuja, studio master or equivalent , od156243/2025-2026:supply and installation of professional 19 inch rack mounted pa amplifier having minimum 3balanced mic/line inputs (combo jacks), 1 auxiliary input, bass/treble and master controls, low cut switch, led indicators for power on, signal and clip, pre out and amp in (send/return), auxiliary line out, 80w rms, at 1percent threshold, operating on ac 220-240v, 50hz/dc 24v/ dc and having 50-15000 hz 3db , speaker outputs of 4, 8, 16 ohms at 70v and 100v, built-in mp3 player warranty. 3 years. preferred make- ahuja, studio master or equivalent , od156348/2025-2026:supply and installation of 16 channel zone selector with provision for switching a 100v audio signal to one or more of up to 16 zones.1 x 100v input, 16 x 100v outputs, manually switchable, built in relay for all call. preferred make: ahuja or equivalent warranty 3 years., 1.17.2:supplying and drawing following sizes of frls pvc insulated copper conductor, single core cable in the existing surface / recessed steel/ pvc conduit as required.2 x 1.5 sq. mm, 1.21.1:supplying and fixing of following sizes of medium class pvc conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm, od158699/2025-2026:supply and installation of necessary electrical accessories for giving proper electrical power to the rack - warranty 3 years., od158700/2025-2026:supply and installation of wooden rack for placing amplifier, cordless receiver and mixer unit.

corporations/Associations/Others

CTN :45444016

25 Jun, 2026 NA

Nicobar Island - Andaman And Nicobar Islands

Tender For annual contract for supply of electrical items for hornbill nest resort at sri vijaya puram and dolphin beach resort at swaraj dweep. - modular switch 6 a/10 amps, modular switch 16 amps, modular socket 5 pin 6 amps/10 amps, modular socket 6 x 16 amps, modular telephone jack 1 m, modular starter single phase 20 amps, hotel key fob switch 32 amps +key tag, modular fan regulator, multi plug conversion, led bulbs 7 w white/warm(thread type), led bulbs 7 w white/warm(pin type), capacitor oil 2.5 mfd, pvc wire multi stand copper 1.5 sq.mm.(2 core), pvc wire multi stand copper 2.5 sq.mm., pvc wire multi stand copper 4.00 sq.mm., pvc wire multi stand copper 6.00 sq.mm., mcb single pole 6 to 32 amps, isolator 4 pole 63a, isolator double pole 40 amps, mcb 4 pole 40 amps, pvc aluminum u.g. cable armod(25 x 4), pvc aluminum u.g. cable armod (50 x 3.5), pvc aluminum u.g. cable armod (120 x 3.5), u.g. cable 10 sqmm (2 core), dwc pipe 40mm, pvc pipe 25 mm mms, pvc pipe 20 mm mms, pvc bend/elbow 25 mm, pvc bend/elbow 20 mm, pvc t 25 mm, pvc t 20 mm, surplus box 2 m, surplus box 3 m, surplus box 4 m, surplus box 6 m, surplus box 8 m, surplus box 12 m, outer plate 2 m, outer plate 3 m, outer plate 4 m, outer plate 6 m, outer plate 8 m, outer plate 12 m, tube light 4 feet led fitting 20w, thermostat for geyser 25 a, thermostat for geyser 20 a, pvc channel 25 mm(2 mtr), led driver 3 watt to 10 watt, led driver 12 watt, led driver 18 watt, mirror tube 2 feet led fittings, insulation tape, calling bell, calling bell switch 6 amps 9 (modular type), bulb holder pin type, flood light 10 watt, green/white, flood light 30 watt, green/warm, flood light 100 watt, green/warm, led pannel fittings (round/square) 12w to 15w, led pannel fittings (round/square) 6w to 9w, led pannel fittings (round/square) 18w to 22w, spot light 3 watt (pin type/ceiling fitting), ceiling fan 1400mm, padestial fan heavy duty 450mm, exhaust fan plastic body 300/250 mm dia, plug top 20 amps., led pannel fittings 5 to 10 w, 2 way 6 amp switch (modular type), rope light adapter, syntex box 5" x 7", d.b box 4 way tpn, fuse wire 200 amps, modular calling bell, service wire 6 sq.mm, square box/junction box, celling rose, cut out 500 amps, rope light led (50 mtrs) warm/green, aluminium leg 10 sq. mm., aluminium leg 16 sq. mm., aluminium leg 25 sq. mm., aluminium leg 50 sq. mm., aluminium leg 90 sq. mm., aluminium leg 120 sq. mm., aluminium leg 150 sq. mm., street light led 50w warm, stabilizer 5 kva, postal lamp 20w led, model: posttop 20w, ref. no. lpth -20.ww, junction dummy plate 4" pvc, foot lamp 4 way led 5w/7w, modular dummy plate, panel mounted mccb 4 pole 250amps, 35 kva, panel mounted mccb 4 pole 160amps, 25 kva, panel mounted mccb 4 pole 100amps, 25 kva, panel mounted mccb 4 pole 80amps, 25 kva, panel mounted mccb 4 pole 63amps, 25 kva, mccb 4 pole 36 kva, 8kv, model: dn3 - 400d, panel mounted change over 400 a, postal lamp led driver 20 w (xitanium 20w, 0.7a 28v), cable tie 250mm, flexible hose pipe 20mm, 2 pin top male/female, cable clip (5mm/8mm/10mm/20mm/25mm), ms screw 25/7, wall grip/plug (1"), change over 63 amps, main switch tpn 63 amps, main switch tpn 100 amps, zero watt bulb led, speaker wire 2.5 sq.mm, postal lamp driver (sodql-54-700-40 watt), sign board driver waterproof led power supply (model no. mj-400-12rp), tv jack modular, plug top 3 pin 6 amps, multi core wire 10 sq.mm, 3 phase preventer voltage monitoring relay series s m 500 4 wire, aluminium leg 240 sq. mm., modular switch 20 amps two module, wall mount fan (plastic body) 450mm dia, exhaust fan (steel body) 450mm dia

CTN :45451265

19 Jun, 2026 NA

Budgam - Jammu And Kashmir

Tender For tender for supply of truss - the principle rafter and the bottom chord shall be fabricated out of rectangular steel hollow sections of size 96mm x 48 mmx 4.00 mm (8.22 kg/rm) , partition truss - the principle rafter and the bottom chord shall be fabricated out of rectangular steel hollow sections of size 96mm x 48 mmx 4.00 mm (8.22 kg/rm) , main column of rhs 122 x 61 x 3.6 mm 9.67 kgs per rm , side column for steel door of rhs 122 x 61 x 3.6 mm (9.67 kgs per rm) , 2.825m length each , runner front and back side length 3660mm , runner partition or gable end length 6100mm , runner front and back door sides length 2450mm , purlin of rectangular steel hollow sections of size 96mm x 48 mm x 4.0 mm (8.22 kg per rm) with 6mm thick , ms extension purlin shall be of 450mm long fabricated out of rectangular steel hollow sections , 1400 x 450mm for door. , ms sunshade with sheet 0.63mm thick 1400 x 450mm for door. , ms sunshade with sheet 0.63mm thick 1500 x 450mm for window , top runner shs 45x45x2.9 mm steel sections , ms sheet top and bottom u channel 3000mm length , false ceiling supporting angle ms 65x65x5 mm , for wall pre-painted gi both sides , tongue and groove , for ceiling- pre-painted gi both sides , tongue and groove , ppgi outer corner flashing 200x200x3050mm , door flashing of size 100x100x2700mm , door flashing of size 100x100x1500mm , window flashing of size 50x50x1100mm , ppgi ridge cover 450x450x3050mm , ppgi inner corner flashing 100x100x2700mm , (colour white) , ppgi inner corner ceiling flashing 50x50x3000mm (l shaped) , ppgi camouflage roof sheet 4000x1060mm x 0.63mm , ppgi camouflage wall cladding sheet 3050x1060mm x 0.63mm , ppgi camouflage for inner partition wall cladding sheet , polycarbonate roof sheet 4000mmx1060mm x 3 mm , ppgi camouflage for gable wall cladding sheet 3000x1060mm x 0.63mm , ms foundation bolt 16x450mm , ms nut and bolt 12 x 40 mm , ms nut and bolt 12 x 100 mm , ms nut and bolt 16 x 50 mm (connect of truss and purlins) , ms nut and bolt 10x75 and washer for fixing of sunshed , gi self tapping screw 75mm (for fixing panel with coln) , gi self tapping screw 25mm (for fixing of inner flasing) , gi self tapping screw 50mm (for fixing of roof sheet) , double shutter steel doors will be provided in each store shelter as shown in the drawing. , windows in each shelter will be provided. window size will be 1.20m x 1.20 m with two vertical panels , one insulated puf door shutter with aluminium frame of suitable size shall be provided complete with pressed steel or u-channel frame , one fixed glass window of size 2.00m wide x 1.20m high shall be provided complete with ms frame , necessary cleats , rubber beading and transparent glass of minimum 5mm thickness , padlock with 7 levers 50mm , with 3 nos spare key. , silicon sealant 280 ml , manufacturing sand (m- sand) confirming to is 383-2016 , crushed stone sand category. , stone aggregate to be crushed rock or gravel 20mm graded conforming to is 383-2016 , stone aggregate to be crushed rock or gravel 40mm graded conforming to is 383-2016 , common burnt clay building bricks sub class b modular size designation 75kgf per cm2 , best locally available with sharp corners , non skid ceramic tiles of size 400 x 400 x 7-8mm conforming to is 15622 2017 , glass dividing strips 40x4mm , prefabricated foundation reinforcement type f-2 made of 12 mm & 10 mm for steel as main bars and 8 mm dia deformed bars as in stirrups us as per drawings , steel form work -type -2 -steel form work material for columns of size 0.3 x 0.3 x 0.9m and columns footing of size 0.9 x 0.9 x 0.3 m ( type f-2) made out of 3mm thick ms sheet , lightning conductor confirming to is - 3043 - 2018 with all accessories , pvc ceiling rose 2 or 3 terminal. , led tube light fitting complete 4 feet long 18 watt tube rod and electronic ballast , xlpe insulated pvc seathed (heavy duty) armoured multi core cable 16 sqmm 2 core aluminum conductor for working voltage up to and including 1100 volt ,

CTN :45419191

16 Jun, 2026 NA

Gwalior - Madhya Pradesh

Tender For tender for supply of furniture items - aluminum knob , readymade tw side for teapoy , thinner for polish 4 liter packing , lakh dana , readymade timber side rails for chair dining , touch wood in 1 ltr pack , readymade timber back legs for chair dining , pu polish , readymade tw flat batten , primer wood in 1 ltr container , plastic laminated sheet teak face , readymade tw flat batten for table dining six pers , locks 65 mm 6 levers , readymade tw flat batten 48x2x1 inch for table dining six pers , knob for cub board 40mm , fevicol in 1 kg , readymade timber front legs for chair dining size 18x1x2 inch , fevicol in1 kg sr hetax , readymade tw flat batten 48x2x1 inch for table writing , paint enamel white in 1 ltr pack container , readymade legs for teapoy , paint enamel smoke gray , readymade tw flat batten , paint enamel olive green , castrel wheel pvc 50 mm dia , black screw full threaded 20mm , plywood , readymade tw side rail for teapoy 24x2x1 inch , readymade tw side rail for teapoy 18x2x1 inch , black screw full threaded 45 mm , chandras for polish , readymade tw flat batten , looking mirror , liquid varnish , mdf board , black screw full threaded 75 mm , paint enamel black in 1 ltr pack container , looking mirror 5mm thick for dressing table ladies , black screw full threaded 35mm , readymade tw legs for table peg , black screw full threaded 65 mm , black screw full threaded 15 mm , black screw full threaded 50 mm , paint enamel red oxide , pegs aluminum 100 mm , knob decorative acrylic , mdf board , readymade timber seat back support rails , pegs aluminum 125 mm , cloth abrasive no 80 , plain mdf board one side teak face other side lamination , plywood bwr gde as per is 303 , black screw full threaded 25 mm , plain mdf board both side colour teak face lamination , butt hinges ms 75 mm , pencil carpenter 10 nos in each pkt , file triangular 6 inch , plastic laminated sheet white colour , plywood case one side teak face , ply wood , cloth abrasive no 100 , ply wood , nails wire 50 mm no 14 , nails wire 65 mm no 14 , plastic laminated sheet 1 mm thick , paint black japan , ss hasp and stapple 125 mm , nails wire 15 mm no 20 , nails wire 60 mm no 14 , plywood , piano type hinges long stainless steel , ss door handle 100 mm , nails wire 100 mm no 14 , nails wire 35 mm no 17 , ss hasp and staple 75 mm , hasp & stapple aluminum anodized , ss hasp and stapple 100 mm , nails wire 20 mm no 20 , nails wire 40 mm no 14 , brush painting 100 mm , nails wire 75 mm no 14 , nails wire 32 mm no 17 , hdhmr board , nails wire 25 mm no 17 , brush painting 75 mm , brush painting 50 mm , telescopic channel , pvc beading

State Government

CTN :45413511

10 Jun, 2026 NA

Kangra - Himachal Pradesh

Tender For tender for supply of equipment material design erection testing commissioning for sop to ms shyam indus pvt ltd co prittam singh at vill baghni by prov 1104kv 25kva sstn aw 3ph lt line in vill baghni in e section bhadwar under esd hpsebl nurpur. t - 25 kva trsanformer, prov. distribution transformer (ordinary), 11/0.4 kv, 25 kva ., prov. steel tubular poles (9 m, working load > 200 kgf/m ) ., prov. muffs with concerete filling, prov. x-arm: [channel iron (100x50x6 mm), length : 2800 mm x 2 nos] for incomer line, prov. ms angle iron (50x50x6 mm), length: (2800 mm) x1 nos for las, prov. x-arm: [channel iron (75x40x6 mm), length : (2800 mm x 4 nos] for supporting do fuse unit & go switch, prov. transformer bed, belting & knee bracing, prov. x-arm: [channel iron (100x50x6 mm), length : 2800 mm x 2 nos] for transformer bed, prov. x-arm [channel iron (100x50x6 mm), length : (460 mm) x 2 nos for supporting main channel of transformer], prov. ms angle iron (50x50x6 mm), length : (2800 mm) x 2 nos, prov. ms angle iron (35x35x5 mm), length : (460 ) x 2 nos, prov. ms angle iron (50x50x6 mm), length : (950 mm) x 2 nos for bed knee bracing, prov. transformer lt distribution box and go switch fixing assembly, prov. ms angle iron (50x50x6 mm), length : (2800 mm) x 2 nos, prov. ms angle iron (50x50x6 mm), length : (450 mm) x 1 nos, prov. go switch handle supporting: [channel iron (75x40x6 mm), length : 460 mm, prov. go ab switch unit (11kv, 400a, 25 ka ) tripple pole o/d type, prov. d.o fuse unit, prov. lighting arrester, 9 kv station class (porcelain type), prov. discs insulator sets (comprising 1 no. disc: ^^(porcelain, bs, 12 kv, 90 kn) including dead end clamps etc.), prov. stay set complete, prov. stay wire (7/3.15 mm) (6.0 kg per stay set), prov. pipe earthing set, prov. lt distribution panel box with mccb(160a, 10ka, 4p, 1no) & sfu(32a, 5no, rewirable), prov. half clamp (m.s. flat 50x6 mm), prov. full clamps (m.s. flat 50x6 mm), prov. nuts and bolts of various sizes (galvanised / coated) [preferably 16 mm or more (with flat and spring washers)], prov. aluminium thimble, prov. copper thimble 35 amp, prov. danger plate, prov. barbed wire, prov. lt cable (3.5 core) 50 mm , prov. energy meter 3- , 4 wire ct operated static tri-vector meter with box(ct-100a), prov. aluminum paint., prov. 6/1/3.35, 50mm ., prov. construction of foundation of transformer, erection of 25 kva s/stn. i.e. digging of pit for pole & earthing two no. poles & 3 nos. for earth drilling of holes in x-arms, preparation of plateform str. members c.i., a.l. i.e. x-arms & k.b. set, errection of d/p, concreating of rcc muff errection of plateform, errection of x-arms, d.o., l.a., mccb, switch lt box, energy meter, errection of transformer, earthing connection to g.o. switch, transformer l.a. etc., errection of stay set, jumper, pipe earthing 3 nos set, l.t. cable, barbed wire and painting complete in all respect., transportation charges @10490/-, prov. transportation charges & mannual carriage of 25 kva pole mounted distribution s/stn. (line length 0.500km), erection of 3- ph. lt line, prov. aaac (7/3.15 50mm ) { neutral conductor including 1% (sag, jumpering and wastage}, prov. steel tubular poles (8 m, working load > 200 kgf/m )., prov. muffs with concerete filling, prov. shackle insulator with d-iron, prov. lt stay set i/c egg insulator., prov. nuts and bolts of various sizes (galvanised / coated) [preferably 16 mm or more (with flat and spring washers)], prov. stay wire, prov. g.i wire no 8swg, erection of 8 mtr. st pole single structure i.e. digging of pit, fixing of insulator, x-arms, k.b. set, top clamp, barbed wire, danger plate, drilling of holes and filling of pit + ramming complete in all respect., sagging of conductor i.e. laying, stringing and sagging & binding with insulator (single wire per km)., sagging of g.i i.e. laying, stringing and sagging & binding with insulator (single wire per km)., erection of stay set lt i.e. d

State Government

CTN :45401783

23 Jun, 2026 5.00 Lacs

Delhi - Delhi

Tender For annual supply of civil items at madhya pradesh bhawan, plot no. 29 c- d, jesus and mary marg, chanakyapuri, new delhi and madhyanchal, 12 ihc pocket, institutional area, vasant kunj, new delhi - annual supply of civil items at madhya pradesh bhawan and madhyanchal, plastic emulsion paint white nerolac/ asian/ici or equivalent make, oil bound nerolac/ asian or equivalent make, texture paint (big dana white) berger/ nerolac/ asian/ici make, enamel paint white color nerolac/ asian /ici or equivalent make, enamel paint black color nerolac/ asian /ici or equivalent make, enamel paint red color nerolac/ asian /ici or equivalent make, enamel paint green color nerolac/ asian /ici or equivalent make, enamel paint yellow color nerolac/ asian /ici or equivalent make, paint silver colour nerolac/ asian /ici or equivalent make, paint white (road marking) nerolac/ asian /ici or equivalent make, paint black (road marking) nerolac/ asian /ici or equivalent make, paint yellow (road marking) nerolac/ asian /ici or equivalent make, paint green (road marking) nerolac/ asian /ici or equivalent make, primar ( paint ) nerolac/ asian /ici or equivalent make, lequer polish asian /ici or equivalent make, touch wood nerolac/ asian /ici or equivalent make, sealer nerolac/ asian /ici or equivalent make, paint remover nerolac/ asian /ici or equivalent make, turpentine wembly / nerolac/ asian /ici or equivalent make, sprite wembly / nerolac/ asian /ici or equivalent make, thinner wembly nerolac/ asian /ici or equivalent make, lakhdana bsko or equivalent make, sand paper waterproof 80 no. 3m or equivalent make, sand paper waterproof 100 no. 3m or equivalent make, sand paper waterproof 120 no. 3m or equivalent make, sand paper waterproof 320 no. 3m or equivalent, dhoti big size cotton, voilet oxide (100 ml.) universal nerolac/ asian /ici or equivalent make, red oxide paint nerolac/ asian or equivalent make, yellow oxide (100 ml.) universal nerolac/ asian /ici or equivalent make, kajal (100 gm.) tiger/ ghari chhap or equivalent make, chock mati tiger/ ghari chhap or equivalent make, turky umber (100 gm.) tiger/ ghari chhap or equivalent make, rawseena (100 gm.) tiger/ ghari chhap or equivalent make, wall putty birla or equivalent make, white cement j.k. birla or equivalent make, pop trimurti or equivalent make, favicole pidilite or make, bostic pidilite or equivalent make, dr. fixit (lw plus) or equivalent make, dr. fixit (urp) or equivalent make, silicon wembley or equivalent make, araldite pidilite or equivalent make, epoxy paint nerolac/ asian or equivalent make, m-seal pidilite or equivalent make, screw wooden " (100pcs.) nettlefolds or equivalent make, screw wooden 3/4" (20*5) (100pcs.) nettlefolds or equivalent make, screw wooden 1" (25*6) (100pcs.) nettlefolds or equivalent make, screw wooden 1 " (100 pcs.) nettlefold or equivalent make, screw wooden 1 " (100 pcs.) nettlefold or equivalent make, screw wooden 2" (100 pcs.) nettlefold or equivalent make, screw wooden 2 " (100 pcs.) nettlefold or equivalent make, screw wooden 3" (100 pcs.) nettlefold or equivalent make, steel screw 20mm nettlefold or equivalent make, steel screw 25mm nettlefold or equivalent make, steel screw 32mm nettlefold or equivalent make, gypsum screw " nettlefolds or equivalent make, gypsum screw 1" nettlefolds or equivalent make, gypsum screw 2" nettlefolds or equivalent make, gypsum screw 2.5" nettlefolds or equivalent make, nails mix tejas or equivalent make, m.s. hinges 4" surya/ sleek or equivalent make, aluminum hinges 4" surya/ sleek or equivalent make, l-bihari hinges (16 crank) hafele or equivalent make, telescopic channel 15" surya/ sleek or equivalent make, telescopic channel 18" surya/ sleek or equivalent make, telescopic channel 24" surya/ sleek or equivalent make, aluminum track channel (2 track) 12 length (as per required color powder coated) jindal or equivalent make, aluminum track channel (3 track) 15 length (as per required color powder coated) jindal or equivalen

Central Government/Public Sector

CTN :45382333

23 Jun, 2026 NA

Jodhpur - Rajasthan

Tender For tender for interior, furnishing, electrical, and ac low side works in central bank of india s mandore branch, district jodhpur - false ceiling- gypsum board , false ceiling tiles , , aluminum sections- , , aluminum sections-door , , aluminum grill , , mdf, particle board , , edhmr/hdhmrboards , , plywood/plyboard / block board(mr grade) - only at specified locations , , laminates , , wood , , moulding& lipping , , wood preservative , , adhesive , , glass , , lock, night latches , , hydraulic door closer , , floor spring (double action 100 kg. -150 kg) , , drawer channel, slider (telescopic) , , key board drawer, tray , , hard ware , , teak wood , , paint , , flooring/dado (vitrified/ceramic) , , roller, venetian blinds , , rubber, polyurethane , , tapestry.leather foam , , wash basin , , wc (ewc, orissa pan) / urinals , , gi pipes , , tap & flush cock , , sink , , cement , , steel , , aggregates , , brick works , , reinforcement bending and fixing , , rcc, pcc works , , aluminum composite panel , , flush doors (hot pressed) , , frls insulated elect. wires/cables , , armourd/unarmoured, , , sheathed, unsheathed, flexible lt cable, , , rotary switches. selector switches , , exhaust fan, pedestal fans, ceiling fan, wall , , electronic energy meter , , electrical accessories modular -switch, plugs sockets, ceiling rose, angle holder, holders , , bell buzzer , , electronic fan regulator , , lights , , data cable, i/o, connectors etc. , , distribution boxes , , digital timer , , refrigerant copper pipes , , pvc conduit pipe & casing -capping for electrical wiring

CTN :45359466

08 Jun, 2026 NA

Mumbai - Maharashtra

Tender For supply of material for joist, channel, angle, or te sections, fixed independently, without connecting plates , supply of material pre-painted galvatume aluminum zinc coating gi based corrugated steel sheet 0.50m

CTN :45363413

15 Jun, 2026 NA

Tiruchirappalli - Tamil Nadu

Tender For supply of euipments for ece lab - ece laboratory, dth trainer kit power supply 200v to 240v ac, 50hz, dish antenna 1.5 aluminum steerable, lnb low noise block down converter input frequency ku band.output frequency 950 to 1450 mhz. conversion gain 65 db. noise temp 35 degree k max. set top box receiver in trainer form if frequency 70 mhz.video bandwidth 50 hz to 5 mhz. video output level 1 vpp at 75 ohm load video polarity normal and or inverted switch selectable audio sub carrier frequency tunable from 5.0 to 8.0 mhz. r.f output channel no 2 uplink satellite insat 4a controls channel selecting, volume, faults 5 no. pcb size 15"x12" with block diagram in multicolor section wise standard accessories dish antenna1.5 feet,lnb,trainer pcb,dish connecting wire, audio-video cable,teaching manual,acrylic cover. hardware material for assembly of dish antenna. dth subscription connection doordarshan free channels

CTN :45019992

06 Jun, 2026 NA

Baramulla - Jammu And Kashmir

Tender For corrigendum : annual stage contract for supply, carriage upto divisional store, unloading etc. of store items required by electric division sopore under m and r for the f.y 2026-27 - supply of steel tubular poles of sizes, st pole 11 mtr. long (st-410 sp56), st pole 9 mtr. long (st-410 sp33), st pole 8 mtr. long (st-410 sp15), supply of pcc poles of sizes, pcc pole 9 mtr. long (wl =300 kg), pcc pole 8 mtr. long (wl =250 kg), supply of acsr conductor of sizes, 0.03 acsr conductor (weasel), 0.05 acsr conductor (rabbit), 0.1 acsr conductor (dog), supply of sub-station items, supply of 11 kv link set (post type) of rated capacity 200 amp (polymer type) , supply of 11 kv link set (post type) of rated capacity 200 amp (porcelain type) , supply of 11 kv link set (line type) heavy duty having rated capacity 600 amp (polymer type) , supply of 11 kv link set (line type) heavy duty having rated capacity 600 amp (porcelain type) , supply of 11 kv gang operating, ab switch 3-phase, 3-pole, 200 amp, vertical type comprising of 9 no. insulators, pipes and lock pad etc complete job (polymer type), supply of 11 kv gang operating, ab switch 3-phase, 3-pole, 200 amp, vertical type comprising of 9 no. insulators, pipes and lock pad etc complete job (porcelain type), supply of gapless surge arrestor, 9 kv, 10 ka, lighting arrestor with polymer housing, stn. type (rashtriya, spark or yamuna make), supply of gapless surge arrestor, 9 kv, 10 ka, lighting arresor with porcelain type housing, stn. type (rashtriya, spark or yamuna make), supply of 11 kv horn gap fuse set 3-phase 200 amp (polymer type), supply of 11 kv horn gap fuse set 3-phase 200 amp (porcelain type), supply of g.i.wire no. 8 swg, supply of guy insulators (11 kv), supply of bobin insulators 40 mm, supply of pole collars of 50x8mm galvanized flat iron with galvanized nuts and bolts of sizes, supply of gi barbed wire for anticlimbing, supply of anticlimbing devices, supply of 11 kv danger plate with clamp, supply of galvanized nuts and bolts of sorts, supply of galvanized channel iron cross arm (100x50x6mm), (75x40x6mm) duly fabricated including clamps and galvanized nuts and bolts of sizes with washers of sizes, supply of galvanized angle iron brace (50x50x6mm) of sizes duly fabricated including clamps of different sizes and galvanized nuts and bolts of sizes with washers of sizes, supply of galvanized v cross-arms duly fabricated of size 75x40x6mm channel iron cross arms including clamps of different sizes and galvanized nuts and bolts of sizes with washers of sizes, supply of m.s. channel iron cross arm (100x50x6mm), (75x40x6mm) duly fabricated including clamps and nuts and bolts of sizes with washers of sizes duly painted with redoxide and and aluminum paint, supply of m.s. angle iron brace (50x50x6mm) of sizes duly fabricated including clamps of different sizes and nuts and bolts of sizes with washers of sizes duly painted with redoxide and and aluminum paint, supply of m.s. v cross-arms duly fabricated of size 75x40x6mm channel iron cross arms including clamps of different sizes and nuts and bolts of sizes with washers of sizes duly painted with redoxide and and aluminum paint, supply of f-top fabricated of galvanized channel iron cross arm (75x40x6mm) 1.5 long and of 6 horizontal length including clamps, collars, nuts and bolts complete with washers etc., supply of protection items (dp mcb c-curve series of breaking capacity 15 ka) (schnieder/siemens/legrand make), 6 amp, 10 amp, 16 amp, 25 amp, 32 amp, 40 amp, 63 amp, supply of protection items (tp mcb c-curve series of breaking capacity 15 ka) (schnieder/siemens/legrand make), 16 amp, 25 amp, 32 amp, 40 amp, 63 amp, supply of protection items (tp mccb wih enclosure complete duly fiited over galvanized angle iron stand/frame duly grouted) (schnieder/siemens/legrand/l&t - d sine series make), 32 amp (breaking capacity 25 ka), 40 amp (breaking capacity 25 ka), 63 amp (breaking capacity 25 ka), 100 amp (breaking capacity 25 ka),

Aluminum Panel Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others

State Government

State Government

Central Government/Public Sector