Latest aluminum pipe Tenders | Government aluminum pipe Tenders

State Government

CTN :41219129

02 Aug, 2025 12.68 Lacs

Delhi - Delhi

Tender For providing and installation /fixing of children play equipment at navkunj apartment in patparganj ac-57. - providing and fixing double arch swing of make kompan/ leo/koochie/hugo/arihant. the arch shaped side frame of the double arch swing is made up of 80 nb gi pipe and top pipe is made up of 50 nb gi pipe. the frame is powder coated to give an aesthetic look. seats-belt type seats made of synthetic rubberized material/fiber reinforced fabric materials of virgin reinforced material. the belt seat is suspended on 6 mm rubber coated gi chain. the ball bearings are mounted inside a specially designed nylon clamp. all complete as per the direction of engineer in charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, cc block 1:2:4 (1 cement:2 coarse sand :4 graded stone aggregate 20mm nominal size ) of required size as per department / manufacturers specifications and guidelines including maintenance cost for 1st year. for the laying of foundation of equipment cc work shall be paid separately., providing & fixing of animal mgr of make kompan/ leo/koochie/hugo/arihant.. bearing heavy duty ball bearing, capacity 4 child, center pipe 2 inch g.i. pipe, diameter 2.0 mtr. dia, handle2 5 mm od g.i pipe, outer frame 32mm od g.i pipe, size dia 2.0 mtr. , height-4 ft, usage/application outdoor playground. the center support of the is made up of 50 nb gi pipe. the pure polyester powder coating done on the pipes extends the life of equipment. all complete as per the direction of engineer in charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, c:c block 1:2:4 (1cement 2 coarse sand 4 graded stone aggregate 20mm nominal size) of required size as per department / manufacturers specifications. for the laying of foundation of equipment cc work shall be paid separately., providing and fixing of multi seater see saw of make kompan/ leo/koochie/hugo/arihant.. size (0.300 m 2.50 m product area) with plank fabricated from 76 mm od pipe and support stand from 58mm od galvanized-iron pipe, complete with roto molded seats and handles. the entire unit is securely anchored into a cement-concrete block foundation after deep excavation and earthwork, including all necessary fixing arrangements. the designated safe play zone measures 2.8 m 4 m, and the see-saw is designed for children aged 3 10 years, accommodating up to four friends riding simultaneously. all complete as per the direction of engineer in charge or as per approved drawing & design given by manufacturer including earth work, c:c work up to plinth level, c:c block 1:2:4 (1) cement :2 coarse sand:4 graded stone aggregate 20 mm nominal size) of required size as per department / manufacturers specifications. for the laying of foundation of equipment cc work shall be paid separately., providing & installing of a swing of make kompan/ leo/koochie/hugo/arihant.. size 3.10x 1.50mtr. main frame: - main cross bar made of round 76 o.d. pipe and legs made of 58 od pipe legs. t pipe will be required for the cross bar. all the pipes should be isi marked as per the is 1239/2004 ) & of reputed brand. ensuring the strength, durability, stability & pan long life to the kids. structure with safety as paramount. seats-belt type seats made of synthetic rubberized material/fiber reinforced fabric materials of virgin reinforced material & also duly with uv resistant colors, chain made of approx. 6mm thick gi chain with rubberized coating of with 3 mm minimum thickness, chrome plated supporting hook for belts hooks for convenience & height adjustment/ seat movement, self lubricated council type bush baring clamps provided with rubber coated chain to be hang the complete belt assembly. the complete structure double art swing should be powder coated with minimum powder coating thickness of 60-80 microns. accessories: nut bolts to be used all approved gi nut bolts

State Government

CTN :41189579

12 Aug, 2025 8.09 Lacs

West Tripura - Tripura

Tender For maintenance of mi scheme under belbari rd block during the year 2025-26/sh_ - repair _ maintenance of pump-motor, suction-delivery _ electrical accessories etc. (job no. tr/34/minor works/wrd-i/2025-26) - dismentling of pump for over hauling including greasing, gland packing, necessary repairs & reinstallation of the same including trial run for 10 hrs. in two spell complete as per direction of the engineer-in-charge.i) for li, supply & fitting fixing ball bearing of approved quality for pump required during overhauling.i) 6306 ball bearing (tata /skf), providing & fitting fixing shaft sleeve bush of approved quality.i) for li (cast iron), providing & fitting fixing shaft sleeve nut of approved quality.i) cast iron (ci), providing & fitting fixing c.i. gland of approved quality.i) for li, providing & fitting fixing c.i coupling complete with nuts & bolts of approved quality.i) 150 mm dia, providing & fitting fixing coupling nuts & bolts (all size)of approved quality.i) for li, providing & fitting fixing coupling rubber bush (all size)of approved quality. i) for li, providing & fitting fixing coupling star bush (all size) of approved quality.i) 150 mm dia, providing & fitting fixing pump shaft of approved quality., supplying and fitting fixing of asbestos rope of best quality as per direciton of engineer-in-charge. i) 6mm to 8mm thick, ii) 10 to 12 mm thick, providing & fitting fixing casing ring of approved quality.i) 150 mm dia (10 mm thick), supplying and fitting fixing of pump cooling pipe of best quality as per direciton of engineer-in-charge., providing & fitting fixing lantern ring for pump of approved quality., supplying and greasing/applying of grease of approved quality as per direction of engineer-in-charge., providing and fixing g.i. bend /elbow in the pipe line including testing of joints complete as per cpwd specification and direction of the engineer - in - charge. a) 150 mm dia, providing & fitting fixing shaft sleeve nut of approved quality. (cast iron), providing & fitting fixing of g.i. flange ( 10 mm wall thickness ) by welding with g.i. / ms pipe and placing position as per specification and the direction of the engineer-in- charge.i) 150 mm dia, providing & fitting fixing gland nut / stag nut 100 mm long for gland of approved quality.i) for li, providing and fitting fixing m.s. clamp for hose pipes with nuts & bolts complete as per relevant is specification anddirection of engineer-in-charge.i) 150mm dia, providing & fitting fixing rubber flange washer 6 mm thick at site of work of approved quality.i)150 mm dia, providing and fitting fixing ms foot valve as per relevant is specification and the direction of the engineer-in-charge.. i) 150 mm dia, providing & fitting fixing c.i tail piece of approved quality at site of work.i) 150 mm dia, providing & fitting fixing foot valve leather washer (6 mm thick) of heavy duty at site of work of approved quality.i) 150 mm dia, providing & fitting fixing c.i foot valve spare parts of 125/150 mm dia at site of work of approved quality.a) c.i foot valve weight, b) c.i foot valve ring, c) c.i foot valve net, dismantling of motor fpr vernishing heating etc cpmplete in/c reinstalltion and trail run for two spell complete as per direction of the engineer-in charge., supplying & fitting fixing of spare parts for 20/25 hp horizontal motor.a) motor fan, b) terminal plate, providing and fitting fixing of fully automatic star delta type motor starter ( 3 ph. 50 hz, 415v, 25hp /18.50 kw relay range within 17-25 ) in steel sheet enclosures with contractors and timer etc. complete suitable for motor pump havells/l & t/bch make direction of the engineer-in-charge.i) 25hp/18.5kw relay range within 13-21 +10%, providing and fitting fixing steel sheet enclosed switch fuse unit (suitable for din fuses). triple pole with neutral link ( tpn ) , 415/500 volt complete as per direction of the engi

State Government

CTN :41219102

02 Aug, 2025 18.80 Lacs

Delhi - Delhi

Tender For maintenance and repair dwarka court complex, sector-10, under sub division-iii, jcd-5 new delhi. (sh- dismantling, cutting, dislodging, refixing and replacement of cast iron, ductile iron, g.i., cpvc pipes and ancillary services in record rooms...

corporations/Associations/Others

CTN :41251130

04 Aug, 2025 NA

Jaipur - Rajasthan

Tender For auction sale of 120kn porcelain disc insulators,160kn porcelain disc insulators,120kv long rod porcelain insulators,245kv ct,420kv ct,400kv la's,scrap bpi,dismantled old lights (mrecuary, sodium, halogen),misc scrap channels/angles/gate valves/y-strainer/bars/sheets etc,scrap conductor,gi scrap,ips tube,copper lead transformer bushing,battery container box , ms frames/pipes,oil tank,fire extinguisger,steel rope sling,empty sf6 cylinder-11kg,empty sf6 cylinder-26kg,empty sf6 cylinder-43kg,nitrogen cylinder-40kg,scrap 12v 26 ah battery,12v 160 ah battery bank,waste transformer oil (without drum),empty oil drums-209 l,power cables,control cables,scrap 400kv porcelain surge arrester,scrap-tower parts,scrap transformer empty oil ms drum,gi earth wire,isolator base channel/gi scrap,scrap wooden packing material(mt),scrap-ms iron,empty sf6 gas cylinder 29kg,empty sf6 gas cylinder 43kg,empty n2 gas cylinder,wood scrap,765kv glass type insulator (broken),split air conditioner (samsung, carrier make),400kv, 120kn disc porcelain insulator,opgw conductor (damaged),scrap oil without drum (compressor oil, engine oil etc),scrap power cable (aluminium),damaged polymer insulator 400kv, 160kn,scrap transformer oil (1 drum 150kg)

State Government

CTN :41235862

18 Aug, 2025 NA

Vadodara - Gujarat

Tender For procurement of galvanized iron (gi) pipes with polyester powder coating of various sizes on annual rate contract basis for a period of 02 years

CTN :41195140

04 Aug, 2025 NA

Kargil - Jammu And Kashmir

Tender For supply of iron angle pipes , bearing balls , squire pipe , iron flat patti 5mm , roller , black paint , squire pipe 2 inch by 2 inch , squire pipe 2 inch by 1 inch , gi pipe 2 point 5 inch , gi pipe 3 inch

CTN :41213286

14 Aug, 2025 43.99 Lacs

Bacheli - Chhattisgarh

Tender For providing of raw water supplies item, filter water supplies item-1) providing and laying including testing ductile iron mechanical joint collar with follower glands conforming to is: 9523/2000 having dimension as per table 24 of is: 9523/2000 in the following nominal diameter/sizes with external bitumen and internal cement mortar lining. 2) providing and laying including testing ductile iron double socket 90 bends conforming to is: 9523/2000 having dimension as per table 15 of is: 9523/2000 in the following nominal diameter/sizes with external bitumen coating and internal cement mortar lining. 3) providing and laying including testing ductile iron double socket 45 bends conforming to is: 9523/2000 having dimension as per table 16 of is: 9523/2000 in the following nominal diameter/sizes with external bitumen coating and internal cement mortar lining. 4) providing and laying including testing ductile iron double socket 22.5 bends conforming to is: 9523/2000 having dimension as per table 17 of is: 9523/2000 in the following nominal diameter/sizes with external bitumen coating and internal cement mortar lining. 5) providing laying and jointing of following galvanized iron (ms) pipes with specials (such as bends, elbows, tees etc) class light, medium & heavy including testing ofjoints, cost of pipes, specials and jointing materials all complete. pipes and sockets conforming to 1s:1239/2011 part 6) providing and fixing g. i. union in g.i. pipe line i/c cutting threading testing etc. complete (new work) confirming to is 1879. 7) providing and fixing g. 1. socket in g.i. pipe line i/c cutting threading testing etc. complete (old work) confirming to is 1879 .8) providing and fixing g. 1. bend 90 degree in g.i. pipe line ife cutting threading testing etc. complete (old work) confirming to is 1879 .9)_ supplying & installation star of energy efficient tive bee rating isi marked required capacity of three phase. 50 hz. 415v. deep well submersible pump steel body, suitable for 6"tube well with control panel starter suitable for submersible pump with dry run protection, single phase preventer, connections, including clamps, bore cap etc, as required as per specifications but excluding pipe and connection cable. .10) .

CTN :41243050

19 Aug, 2025 60.17 Lacs

Ambikapur - Chhattisgarh

Tender For providing laying, jointing and commisioning 100 mm dia 3155 m length ductile iron distribution pipes class (k - 7) in difference location of ambikapur water supply scheme..

CTN :41192424

26 Aug, 2025 20.00 Lacs

Sanawad - Madhya Pradesh

Tender For iron material supply for the fin year 2025 26 - iron mesh (rate per kg) , iron chamber (rate per kg) , iron window (rate per kg) , iron door (rate per kg) , iron ventilation (rate per kg) , iron corrugated sheet galvanized , iron corrugated sheet plain cr/hr , iron pipes all sizes (rate per kg) , anchor bolts (rate per kg) , j hooks & visors (rate per kg) , iron angles (rate per kg) , iron strips (rate per kg) , iron girders (rate per kg) , iron galvanized wire barbette wire (rate per kg) , iron tree guard mesh (rate per kg) , iron shutters (rate per kg) , iron channel gates (rate per kg) , other iron materials (rate per kg) , iron profile sheet all sizes (rate per kg) , chain link mesh all sizes (rate per kg) , screws j hooks & screws, visor all sizes(rate per kg) , iron pipe frame all sizes(rate per kg) , iron fencing pole angle all sizes(rate per kg) , angle + sheet information board all sizes(rate per kg) , garbage cart iron (two wheeler) wheel iron , garbage cart iron (two wheeler) wheel rubber , iron plate all sizes(rate per kg) , tin shed construction and installation rate per square feet , tin shed construction and installation rate per running feet

CTN :41256073

21 Aug, 2025 NA

Mohali - Punjab

Tender For supply & installation of lab equipment for aicte-idea lab at chandigarh engineering college-cgc, landran, mohali-, laser cutter, 2, vinyl cutter, 1, 3, 3d printer, 1, 3d scanner, 1, 4, cnc router, 1, mini desktop lathe cum milling, 1, drilling m/c 1 hp motor, , handheld high speed drilling m/c-15000 rpm with accessories - 2 nos., benchtop grinder machine, solder stations (5 nos.), desoldering m/c, advanced, motorized sewing machine, wood lathe, power tools, portable welding m/c, refrigerator, normal and microwave oven, magnifying glass with stand-2 nos., digital microscope, , digital storage oscilloscope, 1, signal generator, 1, variable power supply, 1, benchtop multimeter, 1, projector, 1, heavy duty laser printer, 1, pcb milling machine", 1, pcb prototype machine, computer workstation in networking- 5 nos., quardcopter assembly kit, 1, 5, 1, smart board, 1, relay module, electric bicycle motor & access, granite surface plate, vacuum cleaner, hot air gun-5 nos., measuring equipment [vernier calliper (0-200/0.01),, vernier height gauge (0-1000mm), micrometer 0-50, 50-100/0.001 inside and outside)], metal scale etc., fire extinguisher, first aid box, digital multimeter (5 units), clothes iron (5 units), electronic component repository (lcr meter, variac etc.), 3d printer filament (depending on the printer, 2 rolls), acrylic sheets (2mm,3mm, 4mm, 5mm all of area 8ft x 4ft) 2 sheets each, foam sheets (krum, 10mm, 12mm, 15mm all of area 8ft x 4 ) 2 sheets each, ply boards (8mm, 12 mm, 18mm, all of area 8ft x 4ft) 2 sheets cach, nylon rods, 12mm, 15mm, 18mm, 25mm all of length i m.5 cach, nuts, 3mm, 4mm, smm, 6mm, 8mm, 10mm, 12mm,100 cach, bolts, dia (3mm, 4mm. smm, 6mm, 8mm, 10mm, 12mm) length (1", 1.5", 2" 2.5"),100, cach, screws.3mm, 4mm, 5mm,100 cach, washers, 3mm, 4mm, smm, 6mm, 8mm, mm, 12mm, 100 cach, studs,6mm, 8mm, length 1m5 each, nails, 1", 2", 3", 100 each, adhesives, m-seal. feviquich, fevi bond, 10 cach, 2way tapes 20 rolls,, pvc pipes, 75°. 1". 1.5", 2.5" 3" length 10ft,1 each, aluminum channels, l, c, box, strip length 12ft.2 each, pcb drill bits,0.5mm, 0.8mm, 1mmm,20 cach, drill bits, jmn, 4mm, smm, 6mm,,20 each, drill bits, 8mm, 10mm, 12mun,5 each, carpentry boring bits, entire kit, 1 kit, electronic active and passive components, resist ors, capacitors, diodes and transistors, 10 each, usb cables for connecting arduino and other development boards.10, radium cutter knives 10, glue sticks.,50, hack saw blades,6" and, 9v battery snaps 20, lan cables, for connecting raspberry pi,5, 9v batteries, 20, hacksaw (5 nos.), micro chisel set (3 nos.), , pliers (3 sets), 3, manual pcb drilling machine (3 nos.), pcb power drilling machine (3 nos.), 3, 3, cordless drilling machines (2 nos.), 2, jigsaw machines (2 nos.), power circular saw (2 nos.), files set (2 sets), 2, file handles (1 set), 1, needle files (2 sets), standard workshop tool, pipe vice (2 pcs.) 2, mini hacksaw (5 nos.), , ball peen hammer (5 nos.), steel shafi claw hammer (5 nos.), nylon mallet (5 pes.), rubber mallet (5 pcs.), allen key set (3 sets), dremel malti tool kit (2 nos.), double ended spanner sets (2) sets), 12 piece open ended spanner set (2 sets), belt and disc sanding machine (1 nos.), scroll saw machine (1 no.), tool wall covering perforator (3 pes), dremel moto saw, bench grinding machine, power return measuring tape (5 nos.), tri square 8" (5 nos.), stamless steel rule (5 nos.), digital vernier caliper (5 nos.), spirit level (5 nos.), dremel cordless rotary tool, gpio power router, sewing machine, impact drill (3 units), ratchet set (2 units), router bit starter kit, scroll saw, hot air blower with soldering iron (5 nos.), tin cutter with spring (10 units), centrifugal blower, screwdriver sets (2 sets), cutting mats (5 nos.), vacuum cleaner (2 nos., hot air gun-5 nos., micrometer-5 nos., glue gun-5 nos., air compressor, allen set wrench (5 set), tongue and groove pliers (5 pcs.), non-contact voltage tester (5) pes.), wire stripper (5 p

Aluminum Pipe Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

corporations/Associations/Others

State Government