Latest aluminum rod Tenders | Government aluminum rod Tenders

CTN :40469202

03 Jul, 2025 NA

Budgam - Jammu And Kashmir

Tender For bid to ras tender for supply of chop saw machine make dewalt , gas cutter make esab , grinding goggle white , welding goggle black , nozzle cutting 1 oblique 64 , nozzle cutting 1 oblique 32 , nozzle cutting 1 oblique 16 , welding white glass shield screen , welding glass black , leather gloves , grinding wheel 100x6x16mm , cutting wheel 100x6 , hydrochloric acid , nausadar , cooper soldering chisel kavya , soldering lead 80 percent , 680 welding rod , gas welding aluminum rod and flux , ms welding rod 2 point 5mm , ms welding rod 3 point 15 mm , ms welding rod 4mm , painting brush 2 inch , painting brush 4 inch , painting brush 01 nos to 12 nos , m seal , anabond , thread tape , insulation tape , 12 nos benjo washer 01 pkt of 100 pcs , 15 nos benjo washer 01 pkt of 100 pcs , 17 nos benjo washer 01 pkt of 100 pcs , 19 nos benjo washer 01 pkt of 100 pcs , clamp hose 0 point 5 inch , clamp hose 1 inch , clamp hose 1 point 5 , feviquick , araldite 25 gm , nut and bolt 8x1 point 5mm , nut & bolt 10x1 point 5mm , nut & bolt 12x1 point 5mm , nut & bolt 14x1 point 5mm , steel screw 0 point 5 inch , steel screw 01 inch , steel screw 1 point 5 inch , water emery blade paper 180 , hacksaw blade , power hacksaw blade , dandrite , wheel balancing weight 10g 20g 50g , grease nipple 11mm , grease nipple 13mm , female thimble pkt of 100 nos , thimble 08mm pkt of 100 nos , thimble 10mm pkt of 100 nos , thimble 12mm pkt of 100 nos , thimble 16mm pkt of 100 nos , thimble 18mm pkt of 100 nos , pvc heat shrink sleeve 01mm , pvc heat shrink sleeve 02mm , pvc heat shrink sleeve 03mm , pvc heat shrink sleeve 04mm , pvc heat shrink sleeve 05mm , pvc heat shrink sleeve 06mm , pvc heat shrink sleeve 08mm , lt wire 1 sq mm auto cable 90 mtr roll , lt wire 2 sq mm auto cable , lt wire 4 sq mm auto cable , lt wire 0.75 sq mm auto cable , lt wire 6 sq mm auto cable , lt wire 8 sq mm auto cable , pvc harness tape black 19mmx60 mtr non adhesive , sleeve tape 25 mtr roll , cotton tape 25 mtr roll , ampper tape 25 mtr roll , battery terminal oblique positive heavy duty , battery cable 80 sq mm red 25 mtr roll , battery cable 80 sq mm black 25 mtr roll , battery cable 50 sq mm red 25 mtr roll , battery cable 50 sq mm black 25 mtr roll , auto blade fuse 05 amp , auto blade fuse 10 amp , auto blade fuse 15 amp , auto blade fuse 20 amp , auto blade fuse 25 amp , soldering wire 60 oblique 40 , head light blub 90 oblique 100 24v , single filament bulb 21w oblique 24v , double filament bulb 21w oblique 24v , single filament bulb 10w oblique 24v , single filament bulb 3w oblique 24v , fog light hallogen bulb 55w oblique 12v , relay 4 pin 12v oblique 30 amp , 4st relay 24v , push batton switch , toggle switch , fog light halogen bulb 55 oblique 21v , head light bulb 12v , assy tail lamp lh , bulb 12v , socket set 46 pcs 1 oblique 4 inch , screw driver set taparia , screw driver flat 150mm taparia , screw driver star 300mm taparia , screw driver star 150mm taparia , line tester taparia , allen key set bosch oblique taparia , ups battery 12v 7 point 5 ah make zebronics , digital wall clock having tempreture display feature

Central Government/Public Sector

CTN :39963024

15 Jul, 2025 NA

Mumbai - Maharashtra

Tender For corrigendum : rate contract for supply of imported spares of caterpillar engines in eastern and northern regions of ongc work centre for a period of five 05 years - resistor, lamp, dm bulk seal, boss, seal, plug-cup, gasket-exhau, filter as, seal, bushing, pin, alternator g, nut, seal o ring, shield as-ma, coupling, adapter, washer, shield as-el, base as o, lamp gp-floo, case, alternator g, rod as-conn, washer, body, nipple, ball, union, washer, seal-lip typ, hsg-regulato, micrometer, gear, pulley, plug-spark, harness a, washer, gasket as kt, seal-lip typ, belt, screw as, bracket, pin, plug as-conn, gear kit idl, head as, seal-lip typ, bolt, elbow-oclr i, ring, wire as, strap-step, block, towel-shop, clip, head gp-cy, head gp-cyl, clamp a, box as, shim gp-gen, bolt, shim-liner s, gasket, pin-spring, bushing, guard-rad lh, terminal kit, fitting, pin, washer, gasket, spacer, spacer as, head gp-cyl, hinge as, clamp, gear, gear, gasket, filter a, plug as, bolt, fluid-urea, orifice, spring, screen, housing as, cap a, shaft as, gasket, guard as-cor, gasket, bonnet, adapter-exh, strap-cable, gasket, insulation, screw, seal o ring, cont gp-elek, cap as, cap a, terminal-dou, cover-air in, packing, gasket, seal-o ring, tool gp, mount, screw, nut, cap a, shim pack, cushion kit, plug a, plug, cap as.-o fl, cap end, shutoff gp-b, kit cover, spring, mount-shock, clip, plug, kit hardware, shell a, guard, manifold gp, frame as-lh, frame as.-rh, spacer, gasket, seal, adapter, core a rad, guard, bracket, washer, roller a, fitting, dowel, seal a, plate, coupling, stand-eng, muffler as, seal-o-ring, seal, shim pack, bolt, bolt, capscrew, race&rlr as, pin-piston, bracket as., bolt, bolt, bolt, gasket, manifold as-, manifold gp, mount, bellow as., radiator kt, base a, elbow, cap a oil, cap oil f, mount, pin, filter a, guard, elbow, cap-wiper, cap as-fill, filter a, mount, bottle as., washer, cap as-fille, tube a, washer, guard-core, gasket, screw-sems, solenoid gp, cap-radiator, gasket kit, guard, bellows as, nut-m40, gasket, washer, guard as, solenoid as, manifold, seal, base-relay, body as-pist, elbow, adapter, coupling, cm-tube stk, cm sleeve bk, kit body, plug, rotocoil a, exciter, turbo gp-bas, ring, turbo g, turbo gp, bracket a, core gp, core as, arm a, sensor, actuator as, cotter pin, harness as, head gp, head gp-cyl, filter a, lockwasher, knob, gasket, radiator gp, element, gasket, harness as, seat wear, gasket, line as, governor gp, line as, cartridge g, elbow, elbow a, exchanger g, filter-fuel, housing a, injector g, lifter as, line as, line as, line as, lubricator g, plunger as, core a, gear, line as, line as, line as, line as, line as, line as, line as, line as, line as, line as, line as, core as-oclr, manifold as, pump gp wtr, sender as, gasket, line as, repair kit, pipe, rack, line as, gasket, valve a, harness as, pump gp, gasket, screw-pan he, gasket, gasket, nut, harness as, valve g, nut, piston as, head gp, valve-exhaus, bolt con rod, guide-valve, bracket, elbow, retainer, gasket, adapter, seal as, elbow, gasket, cover, cover, head as-cyli, liner-cylind, head gp-cyl, rod as-conn, shaft, valve, camshaft a, guard-core, washer, screw, bolt as-conn, cap dust, bolt, shield, gasket, connector, socket-relay, housing, cont gp, cont gp - b, core as-ht e, adapter, housing, turbo gp-bas, cartridge gp, connector, valve gp-fue, retainer, governor g, cont grp, cover, elbow, elbow, housing, elbow, pin, base oil, bracket, elbow, washer, capscrew, cap screw, lockwasher, mount shock, insulator, spring, rod a, ferrule, rotocoil a, spring, mount a, camshaft as, bolt, lock, radiator gp-, guide-valve, valve-intake, retainer a, guide-valve, guide, insert, bolt-groun b, lock, ring-top, insert, ring as pist, ring g, valve, valve, retainer, body assy, ring-piston, piston ring, body as-pist, valve, valve inlet, insert seat, body as-pist, liner cylind, body a, kit-gasket, pin-piston, spring, spring, washer, screw-adj, valve exhaus, kit-gasket-m, guide, sp

State Government

CTN :40872507

14 Jul, 2025 1.26 Crore

Multi City - Karnataka

Tender For re babbiting-dismantling of bearings and pads from housing,rebabbiting of 10 nos tgb thrust pad along with all accessories,rebabbiting of turbine guide bearing, mid bearing & end bearing along with floating seals and all accessories,material composite test, ut test and dp test should be done for re-babbitted material,assembly of re-babbited bearings with blue match,submitting the video graphs of re-babbiting and reports of re-babbiting.re-alignment-the reason for shifting of generator shaft by 2 to 3 mm shall be analyzed and rectification works needs to be carried out,complete dismantling, assembling, painting and re-alignment of machine shaft,inspection of turbine shaft journal surface and repairs if required,inspection/replacement of worn out bushes and seals of guide vane, if necessary,inspection and repair of labyrinth ring, face plates, guide vanes and runner,guide vanes bed setting,tgb water cooler descaling work to improve the efficiency of cooler,complete assembly of machine,checking the magnetic axis of the generator and to ensure its alignment, checking of the unit leveling at all places and complete alignment of machine shaft,testing & commissioning of complete machine,painting of entire machine,checking of vibration & site balancing of machine,submission of vibration, balancing & alignment reports.flow switch-supply and installation of flow switch (flow rate110 lpm) along with 01 no 01 nc contact for inlet and outlet lubrication oil pipelines,supply and installation of pressure switch (30bar) for inlet and outlet lubrication oil pipelines,supply and installation of level switch for in tgb oil sump.replacement of new miv trunion shaft-dismantling of miv counter weight, miv servomotor assembly, and other related parts,lifting of miv from the bed,transportation of miv to the firms place, if required,replacing old nitrile rubber trunnion seals with existing profile by new one on both sides,replacements of miv trunnion shaft. providing of necessary drawings,material composite test, ut test and dp test should be done for new trunnion shaft & trunnion seals, bushes etc,all related fasteners and dowel pin to be replacing by new one,drive and non drive end trunnion bush, cupseals, stop end plate, washer ring etc need to be replacing by new one,repair of miv discand main body to be attended, if required,supply and replacement of miv disc rubber seal,pressure testing and commissioning should be carried out as per standard in presence of kpcl engineers,all tools & tackles required for the above mentioned works shall be arranged by contactor only.

CTN :40853759

05 Jul, 2025 3.97 Crore

Rajkot - Gujarat

Tender For construction of un-reinforced dowel jointed plain cement concrete pavement work for cleaning & drying area at south side ground area, sr. no. 261/p, apmc, main market yard, vill.: bedi, rajkot (2nd attempt)

CTN :40862067

09 Jul, 2025 NA

Bhind - Madhya Pradesh

Tender For under case number 11/25x3/5, small construction work, maintenance, repair, patchwork and material supply work in ward number 09 under the body area.-, , cement concrete grade m-10 (nominal mix with 40 mm maximum size of stone aggregate-providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level, foundations, footings, bases of columns, etc. for mass concrete centering and shuttering including strutting, propping stretchin g etc. complete for and removal of form work by sheet plate or ply wood shuttering for:, cement concrete grade m-20 (nominal mix) with 20 mm maximum size of stone aggregate-providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level, providing and laying cement concrete grade m-20 (nominal mix 1:1.5:3) with 20 mm graded crushed stone aggregate, mixing shall be in mechanical mixer, laying with paver compacting by use of pin, plate/screed vibrators including form work by strong steel girders fixed by spikes, separation membrane 125 micron thick, i/c cutting of joints @ 4 to 5 m interval & filling it with hot applied bitum inous sealant (without dowel bars). (max. thickness 20cm)", , thermo-mechanically treated bars. (fe 500 d or more)-"reinforcement for r.c.c. work including straightening, cutting, bending, placi ng in position and binding upto floor level including cost of binding wire, wastage and over laps upto 12mm horizontal/inclined pos ition of reinforcement bars in slab and beams, plinth, chajjas, lintels, upto 4.5m vertical length of reinforcement in wall columns (over laps shall be provided as per requirement of is: 13920; is 456 & sp: 34) etc. complete.", construction of granular sub-base by providing coarse graded material (cbr>30), spreading in uniform layers with motor grader on pr epared surface, mixing by mix in place method at omc and compacting with vibratory roller of 80-100 kn static weight to achieve the desired density, complete in all respect as per relevant clauses of section-400.", structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete, , two or more coats on new work.-"distempering with 1st quality acrylic distemper (ready mixed) of approved manufacturer, of required shade and colour complete, as per manufacturer's specification.", 300 mm dia-"providing, laying and jointing non-pressure (np4) rcc socket & spigot pipes with rubber gasket joint including testing of joints., 450 mm dia-"providing, laying and jointing non-pressure (np4) rcc socket & spigot pipes with rubber gasket joint including testing of joints, 600 mm dia-"providing, laying and jointing non-pressure (np4) rcc socket & spigot pipes with rubber gasket joint including testing of joints., ,

CTN :40862068

09 Jul, 2025 NA

Bhind - Madhya Pradesh

Tender For under case number 04/25x3/5, small construction work, maintenance, repair, patchwork and material supply work in ward number 02 within the body area.-, , cement concrete grade m-10 (nominal mix with 40 mm maximum siz of stone aggregate-providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work u to plinth level., , foundations, footings, bases of columns, etc. for mass concrete."-"centering and shuttering including strutting, propping stretchin g etc. complete for and removal of form work by sheet plate or ply wood shuttering for:", , cement concrete grade m-20 (nominal mix with 20 mm maximum size of stone aggregate-providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level., , providing and laying cement concrete grade m-20 (nominal mix 1:1.5:3) with 20 mm graded crushed stone aggregate, mixing shall be in mechanical mixer, laying with paver compacting by use of pin, plate/screed vibrators including form work by strong steel girders fixed by spikes, separation membrane 125 micron thick, i/c cutting of joints @ 4 to 5 m interval & filling it with hot applied bitum inous sealant (without dowel bars). (max. thickness 20cm)", , thermo-mechanically treated bars. (fe 500 d or more)-"reinforcement for r.c.c. work including straightening, cutting, bending, placi ng in position and binding upto floor level including cost of binding wire, wastage and over laps upto 12mm horizontal/inclined position of reinforcement bars in slab and beams, plinth, chajjas, lintels, upto 4.5m vertical length of reinforcement in wall columns (over laps shall be provided as per requirement of is: 13920; is 456 & sp: 34) etc. complete.", , construction of granular sub-base by providing coarse graded material (cbr>30), spreading in uniform layers with motor grader on pr epared surface, mixing by mix in place method at omc and compacting with vibratory roller of 80-100 kn static weight to achieve the desired density, complete in all respect as per relevant clauses of section-400.", , structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete", , two or new work.-"distempering with 1st quality acrylic distemper (ready mixed) of approved manufacturer, of required shade and colour complete, as per manufacturer's specification.", , 300 mm dia-"providing, laying and jointing non-pressure (np4) rcc socket & spigot pipes with rubber gasket joint including testing o f joints.", , 450 mm dia-"providing, laying and jointing non-pressure (np4) rcc socket & spigot pipes with rubber gasket joint including testing o f joints.", , 600 mm dia-"providing. laying and jointing non-pressure (np4) rcc socket & spigot pipes with rubber gasket joint including testing o f joints.",

CTN :40862072

09 Jul, 2025 NA

Bhind - Madhya Pradesh

Tender For under case number 11/25x3/5, small construction work, maintenance, repair, patchwork and material supply work in ward number 09 under the body area.-, , cement concrete grade m-10 (nominal mix with 40 mm maximum size of stone aggregate-providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level, foundations, footings, bases of columns, etc. for mass concrete centering and shuttering including strutting, propping stretchin g etc. complete for and removal of form work by sheet plate or ply wood shuttering for:, cement concrete grade m-20 (nominal mix) with 20 mm maximum size of stone aggregate-providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level, providing and laying cement concrete grade m-20 (nominal mix 1:1.5:3) with 20 mm graded crushed stone aggregate, mixing shall be in mechanical mixer, laying with paver compacting by use of pin, plate/screed vibrators including form work by strong steel girders fixed by spikes, separation membrane 125 micron thick, i/c cutting of joints @ 4 to 5 m interval & filling it with hot applied bitum inous sealant (without dowel bars). (max. thickness 20cm)", , thermo-mechanically treated bars. (fe 500 d or more)-"reinforcement for r.c.c. work including straightening, cutting, bending, placi ng in position and binding upto floor level including cost of binding wire, wastage and over laps upto 12mm horizontal/inclined pos ition of reinforcement bars in slab and beams, plinth, chajjas, lintels, upto 4.5m vertical length of reinforcement in wall columns (over laps shall be provided as per requirement of is: 13920; is 456 & sp: 34) etc. complete.", construction of granular sub-base by providing coarse graded material (cbr>30), spreading in uniform layers with motor grader on pr epared surface, mixing by mix in place method at omc and compacting with vibratory roller of 80-100 kn static weight to achieve the desired density, complete in all respect as per relevant clauses of section-400.", structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete, , two or more coats on new work.-"distempering with 1st quality acrylic distemper (ready mixed) of approved manufacturer, of required shade and colour complete, as per manufacturer's specification.", 300 mm dia-"providing, laying and jointing non-pressure (np4) rcc socket & spigot pipes with rubber gasket joint including testing of joints., 450 mm dia-"providing, laying and jointing non-pressure (np4) rcc socket & spigot pipes with rubber gasket joint including testing of joints, 600 mm dia-"providing, laying and jointing non-pressure (np4) rcc socket & spigot pipes with rubber gasket joint including testing of joints., ,

CTN :40862073

09 Jul, 2025 NA

Bhind - Madhya Pradesh

Tender For under case number 08/25x3/5, small construction work, maintenance, repair, patchwork and material supply work in ward number 06 within the body area.-, , cement concrete grade m-10 (nominal mix with 40 mm maximum siz of stone aggregate-providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work u to plinth level., , foundations, footings, bases of columns, etc. for mass concrete."-"centering and shuttering including strutting, propping stretchin g etc. complete for and removal of form work by sheet plate or ply wood shuttering for:", , cement concrete grade m-20 (nominal mix with 20 mm maximum size of stone aggregate-providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level., , providing and laying cement concrete grade m-20 (nominal mix 1:1.5:3) with 20 mm graded crushed stone aggregate, mixing shall be in mechanical mixer, laying with paver compacting by use of pin, plate/screed vibrators including form work by strong steel girders fixed by spikes, separation membrane 125 micron thick, i/c cutting of joints @ 4 to 5 m interval & filling it with hot applied bitum inous sealant (without dowel bars). (max. thickness 20cm)", , thermo-mechanically treated bars. (fe 500 d or more)-"reinforcement for r.c.c. work including straightening, cutting, bending, placi ng in position and binding upto floor level including cost of binding wire, wastage and over laps upto 12mm horizontal/inclined position of reinforcement bars in slab and beams, plinth, chajjas, lintels, upto 4.5m vertical length of reinforcement in wall columns (over laps shall be provided as per requirement of is: 13920; is 456 & sp: 34) etc. complete.", , construction of granular sub-base by providing coarse graded material (cbr>30), spreading in uniform layers with motor grader on pr epared surface, mixing by mix in place method at omc and compacting with vibratory roller of 80-100 kn static weight to achieve the desired density, complete in all respect as per relevant clauses of section-400.", , structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete", , two or new work.-"distempering with 1st quality acrylic distemper (ready mixed) of approved manufacturer, of required shade and colour complete, as per manufacturer's specification.", , 300 mm dia-"providing, laying and jointing non-pressure (np4) rcc socket & spigot pipes with rubber gasket joint including testing o f joints.", , 450 mm dia-"providing, laying and jointing non-pressure (np4) rcc socket & spigot pipes with rubber gasket joint including testing o f joints.", , 600 mm dia-"providing. laying and jointing non-pressure (np4) rcc socket & spigot pipes with rubber gasket joint including testing o f joints.",

CTN :40862074

09 Jul, 2025 NA

Bhind - Madhya Pradesh

Tender For under case number 11/25x3/5, small construction work, maintenance, repair, patchwork and material supply work in ward number 09 under the body area.-, , cement concrete grade m-10 (nominal mix with 40 mm maximum size of stone aggregate-providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level, foundations, footings, bases of columns, etc. for mass concrete centering and shuttering including strutting, propping stretchin g etc. complete for and removal of form work by sheet plate or ply wood shuttering for:, cement concrete grade m-20 (nominal mix) with 20 mm maximum size of stone aggregate-providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level, providing and laying cement concrete grade m-20 (nominal mix 1:1.5:3) with 20 mm graded crushed stone aggregate, mixing shall be in mechanical mixer, laying with paver compacting by use of pin, plate/screed vibrators including form work by strong steel girders fixed by spikes, separation membrane 125 micron thick, i/c cutting of joints @ 4 to 5 m interval & filling it with hot applied bitum inous sealant (without dowel bars). (max. thickness 20cm)", , thermo-mechanically treated bars. (fe 500 d or more)-"reinforcement for r.c.c. work including straightening, cutting, bending, placi ng in position and binding upto floor level including cost of binding wire, wastage and over laps upto 12mm horizontal/inclined pos ition of reinforcement bars in slab and beams, plinth, chajjas, lintels, upto 4.5m vertical length of reinforcement in wall columns (over laps shall be provided as per requirement of is: 13920; is 456 & sp: 34) etc. complete.", construction of granular sub-base by providing coarse graded material (cbr>30), spreading in uniform layers with motor grader on pr epared surface, mixing by mix in place method at omc and compacting with vibratory roller of 80-100 kn static weight to achieve the desired density, complete in all respect as per relevant clauses of section-400.", structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete, , two or more coats on new work.-"distempering with 1st quality acrylic distemper (ready mixed) of approved manufacturer, of required shade and colour complete, as per manufacturer's specification.", 300 mm dia-"providing, laying and jointing non-pressure (np4) rcc socket & spigot pipes with rubber gasket joint including testing of joints., 450 mm dia-"providing, laying and jointing non-pressure (np4) rcc socket & spigot pipes with rubber gasket joint including testing of joints, 600 mm dia-"providing, laying and jointing non-pressure (np4) rcc socket & spigot pipes with rubber gasket joint including testing of joints., ,

CTN :40862076

09 Jul, 2025 NA

Bhind - Madhya Pradesh

Tender For under case number 11/25x3/5, small construction work, maintenance, repair, patchwork and material supply work in ward number 09 under the body area.-, , cement concrete grade m-10 (nominal mix with 40 mm maximum size of stone aggregate-providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level, foundations, footings, bases of columns, etc. for mass concrete centering and shuttering including strutting, propping stretchin g etc. complete for and removal of form work by sheet plate or ply wood shuttering for:, cement concrete grade m-20 (nominal mix) with 20 mm maximum size of stone aggregate-providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level, providing and laying cement concrete grade m-20 (nominal mix 1:1.5:3) with 20 mm graded crushed stone aggregate, mixing shall be in mechanical mixer, laying with paver compacting by use of pin, plate/screed vibrators including form work by strong steel girders fixed by spikes, separation membrane 125 micron thick, i/c cutting of joints @ 4 to 5 m interval & filling it with hot applied bitum inous sealant (without dowel bars). (max. thickness 20cm)", , thermo-mechanically treated bars. (fe 500 d or more)-"reinforcement for r.c.c. work including straightening, cutting, bending, placi ng in position and binding upto floor level including cost of binding wire, wastage and over laps upto 12mm horizontal/inclined pos ition of reinforcement bars in slab and beams, plinth, chajjas, lintels, upto 4.5m vertical length of reinforcement in wall columns (over laps shall be provided as per requirement of is: 13920; is 456 & sp: 34) etc. complete.", construction of granular sub-base by providing coarse graded material (cbr>30), spreading in uniform layers with motor grader on pr epared surface, mixing by mix in place method at omc and compacting with vibratory roller of 80-100 kn static weight to achieve the desired density, complete in all respect as per relevant clauses of section-400.", structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete, , two or more coats on new work.-"distempering with 1st quality acrylic distemper (ready mixed) of approved manufacturer, of required shade and colour complete, as per manufacturer's specification.", 300 mm dia-"providing, laying and jointing non-pressure (np4) rcc socket & spigot pipes with rubber gasket joint including testing of joints., 450 mm dia-"providing, laying and jointing non-pressure (np4) rcc socket & spigot pipes with rubber gasket joint including testing of joints, 600 mm dia-"providing, laying and jointing non-pressure (np4) rcc socket & spigot pipes with rubber gasket joint including testing of joints., ,

Aluminum Rod Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government