Latest aluminum welding rod Tenders | Government aluminum welding rod Tenders

State Government

CTN :45434647

11 Jun, 2026 5.76 Lacs

Baddi - Himachal Pradesh

Tender For (sh laying jointing of new pipe, repair at damaged portion by cutting and welding and complete testing of gravity main gi pipe 65 mm dia from mst to sst at village baddu). under pdna - - pdna work for lwss bassi bangoa under jsv section chandi in tehsil kasauli distt. solan (hp) (sh:-laying jointing of new pipe, repair at damaged portion by cutting and welding and complete testing of gravity main gi pipe 65 mm dia from mst to sst at village baddu).

CTN :45436038

29 Jun, 2026 NA

Howrah - West Bengal

Tender For supply of welding portion under the jurisdiction of sr. den/1/hwh & sr. den/4/hwh.

State Government

CTN :45439425

15 Jun, 2026 NA

Jamnagar - Gujarat

Tender For unit rates of composite items forrecharge scheme for defunct privatetube wells/wells for groundwaterrecharge in jamnagar dist. underpanchayat irrigation division,jamnagar for the year 2025-26. (six attempt) - jungle cutting and site clearing., for filter trench, excavation for pipeline laying up to 1.5 meter depth in all strata including providing all leads and lifts for excavated soil., for filter trench, excavation for pipeline laying from 1.5 meter to 3.0 meter depth in all strata including providing all leads and lifts for excavated soil.scope of work, providing tarpaulin sheet of 250 gsm thickness, pebbles of size 5 to 10 millimeter (river pebbles)., gravel of size 2 to 5 millimeter, activated charcoal of size 3 millimeter, coarse sand, 150 millimeter diameter pvc pipe(4 kg/cm2)., 1200 millimeter diameter rcc np-3 class pipe, brick masonry work in cement mortar (1:4) inside 1200 millimeter diameter r.c.c. pipe., backfilling of excavated trench for pipeline with soil, disposal of excavated soil obtained from defunct well, providing and fixing grill cover made of angle 35 x 35 x 5 millimeter and wire mesh, brick masonry work in cement mortar (1:6) for 9 inch thick parapet wall around closed well, pressurewashing tubewell by air compressor of 500 cubic feet per minute / 150 pounds force per square inch capacity, oil painting to exposed portion of tubewell pipe, providing and fixing tubewell type v wire screen isi approved pipe (opening size 1.5 to 3.0 mm)., welding of v wire screen pipe with tubewell pipe, jungle cutting and site clearing., for filter trench, excavation for pipeline laying up to 1.5 meter depth in all strata including providing all leads and lifts for excavated soil., for filter trench, excavation for pipeline laying from 1.5 meter to 3.0 meter depth in all strata including providing all leads and lifts for excavated soil.scope of work, providing tarpaulin sheet of 250 gsm thickness, pebbles of size 5 to 10 millimeter (river pebbles)., gravel of size 2 to 5 millimeter, activated charcoal of size 3 millimeter, coarse sand, 150 millimeter diameter pvc pipe(4 kg/cm2)., 1200 millimeter diameter rcc np-3 class pipe, brick masonry work in cement mortar (1:4) inside 1200 millimeter diameter r.c.c. pipe., backfilling of excavated trench for pipeline with soil, disposal of excavated soil obtained from defunct well, providing and fixing grill cover made of angle 35 x 35 x 5 millimeter and wire mesh, brick masonry work in cement mortar (1:6) for 9 inch thick parapet wall around closed well, pressurewashing tubewell by air compressor of 500 cubic feet per minute / 150 pounds force per square inch capacity, oil painting to exposed portion of tubewell pipe, providing and fixing tubewell type v wire screen isi approved pipe (opening size 1.5 to 3.0 mm)., welding of v wire screen pipe with tubewell pipe, jungle cutting and site clearing., for filter trench, excavation for pipeline laying up to 1.5 meter depth in all strata including providing all leads and lifts for excavated soil., for filter trench, excavation for pipeline laying from 1.5 meter to 3.0 meter depth in all strata including providing all leads and lifts for excavated soil.scope of work, providing tarpaulin sheet of 250 gsm thickness, pebbles of size 5 to 10 millimeter (river pebbles)., gravel of size 2 to 5 millimeter, activated charcoal of size 3 millimeter, coarse sand, 150 millimeter diameter pvc pipe(4 kg/cm2)., 1200 millimeter diameter rcc np-3 class pipe, brick masonry work in cement mortar (1:4) inside 1200 millimeter diameter r.c.c. pipe., backfilling of excavated trench for pipeline with soil, disposal of excavated soil obtained from defunct well, providing and fixing grill cover made of angle 35 x 35 x 5 millimeter and wire mesh, brick masonry work in cement mortar (1:6) for 9 inch thick parapet wall around closed well, pressurewashing tubewell by air compressor of 500 cubic feet per minute / 150 pounds force per square inch capacity, oil painting t

Central Government/Public Sector

CTN :45405110

23 Jun, 2026 NA

Mumbai - Maharashtra

Tender For a)balance work of welding of rail joints with 52kg & 60kg portion with contractor & material and equipment's and supply of skv welding kit in south east section under aden(n)lnl. b)balance work of welding of rail joints with 52kg & 60kg portion with contractors material and equipment's and supply of skv welding kit in sr. den (se) section.

Central Government/Public Sector

CTN :45384656

13 Jun, 2026 31.96 Lacs

Pune - Maharashtra

Tender For provision of additional transformer alongwith associated items at af stn pune under ge (af)lohegaon - s & f steel tubular swaged poles complete with cast iron plate, finial taper plug, bolt, nuts & screws as specified type 410 sp-55 (11 mtr long) including one coat of red oxide primer and two coats of aluminium paint and making 30 cm wide strips (total -05 nos) with yellow and black paint alternately on external surface above column/pcc benching including numbering with black paint and painting with bitumenous paint internally and externally for portion embedded complete all as specified and directed., s & f air break gang operated switch with 12 nos insulators outdoor type, triple pole, mechanically operated, suitable for vertical installation, single break, provided with locking arrangement consisting of ms chanel ht post type insulator copper alloy, high pressure assembly drop out fuses operating rod of 20 mm dia gi pipe (medium grade) for operating from 1.2 m above gl complete including drop out fuses conforming to is-9921 part-i to v (1982 to 1985) of 1972 rated voltage 11 kv and for current rating 200 amp all as specified, material and labour for lightning arresters nominal discharge current peak 65 ka rating, suitable for operation on ht 11000 volts system, comprising of zinc oxide disks, electrodes, fibre re-in forced composite structure, non tracking weather resistant shedded heat shrinked polymeric housing for withstanding from the effects of pollution, rain, heat and with moisture seal , stainless steel bolts and nuts, stainless steel end fitting cups and fixing arrangements complete all as specified and as directed., m&l for cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections i.e m.s. channel or angle sections etc. including new nuts, bolts, washers as reqd dia/length in size, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive one primer coat of red oxide, one under coat and one finishing coat of aluminium paint (1st quality ) as reqd complete as specified., m & l for cement concrete 1:3:6 type c1 (using 20 mm graded aggregate) as lean concrete for coping of pole, stay foundation etc including form work & finishing the surfaces even & smooth with out using extra cement complete all as specified, material and labour for cement concrete 1:2:4, type b-2 (using 40 mm graded stone aggregate) as lean concrete for road finishing even and fair without using extra cement complete all as specified and as directed., supply, laying & testing cable xlpe insulated, screened, pvc bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 11000 volts grade, of size 3 core 95 sq mm., s&f of cable end jointing kit 95 sqmm, 3 core xlpe 11kv ht cable cold shrinkable outdoor type, incl carrying out 5kv megger test after jointing complete all as specified and directed by engr-in-charge., s&f of cable end jointing kit 95 sqmm, 3 core xlpe 11kv ht cable cold shrinkable indoor type, incl carrying out 5kv megger test after jointing ,complete all as specified and directed by engr-in-charge., supply, laying & testing cable xlpe insulated, screened, pvc bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 1100 volts grade, of size 3.5 core 400 sq mm including aluminium lugs, cable glands ,complete all as specified and directed by engr-in-charge., supply, laying & testing industral pvc frls insulated single core flexible cable, electric power cables (heavy duty) with stranded copper conductor, 1100 volts grade, of size single core 185 sq mm, including copper cable lugs, cable glands ,complete all as specified and directed by engr-in-charge., supply and install, testing and commisioning of outdoor transformer as per is : 1180 part-i, level-ii step down, copper wound 11

Central Government/Public Sector

CTN :45396357

22 Jun, 2026 NA

Nagpur - Maharashtra

Tender For supply of alumino thermit welding tools equipment & accessories with preheating by compressed air blower using 3 piece mould for 52kg/60kg portion as per sr. no. 1 to 48 of list enclosed( total 48 items) firm to submit compliance sheet with offer. [ warranty period: 30 months after the date of delivery ] ]

Central Government / Public Sector

CTN :45389470

12 Jun, 2026 NA

Sambalpur - Odisha

Tender For supply of alumino thermic welding portion for 60kg/60ei- r260 rails, 60kg 90 uts rails and 52 kg 90 uts rails at various location under the jurisdiction of sr.den/south of sambalpur division.

Central Government / Public Sector

CTN :45390288

19 Jun, 2026 NA

Sambalpur - Odisha

Tender For supply of alumino thermic welding portion for 60kg/60ei - r260 rails at various location under jurisdiction of sr.den/west of sambalpur division.

Central Government And Public Sector

CTN :45389458

19 Jun, 2026 NA

Nagpur - Maharashtra

Tender For supply of at welding portion for 60/52 kg 90 uts/60e1 r260 grade rails using compressed air-petrol pre-heating system, 3 piece pre-fabricated moulds (zircon washed) manually pressed using single shot crucible fitted with automatic tapping thimble for welding of rail joints under the jurisdiction of aden/nagbhir.

Central Government / Public Sector

CTN :45334707

17 Jun, 2026 NA

Khurda - Odisha

Tender For supply of welding portion for 60 kg 90 uts, 60kg/60ei-r260 grade rails and for combination joints by at/skv process (single shot crucible technique) under sr.den(hq) of khurda road division.

Aluminum Welding Rod Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors