Latest aluminum work Tenders | Government aluminum work Tenders

Central Government/Public Sector

CTN :45492757

19 Jun, 2026 NA

South Andaman - Andaman And Nicobar Islands

Tender For supply of partition of aluminum film , supply and fitment of aluminum rack for storage of diving cylinder , supply and fitment of rubber mat for keeping cylinder , fabrication of iron stand trolley based of diving air compressor , fabrication of aluminum rack for storage of neoprene suit and diving accessories

Central Government/Public Sector

CTN :45417510

22 Jun, 2026 91.48 Lacs

Delhi - Delhi

Tender For scope of work are concertina coil work, rcc work, brick work, painting work, wooden work, pvc works, cc work, plaster work, earth work, false ceiling work, aluminum work, glass etc.

State Government

CTN :45430193

19 Jun, 2026 16.64 Lacs

Shimla - Himachal Pradesh

Tender For renovation and up-gradation of labs i/c proposed new lab by providing half brick work cement concrete in shelves, pine wood paneling, aluminum work, metal ceiling pvc flooring, vista levolor ventian blinds, granite work i/c other miscellaneous works - renovation and up-gradation of labs i/c proposed new lab by providing half brick work, cement concrete in shelves, pine wood panelling, aluminium work, metal ceiling, pvc flooring, vista levolor ventian blinds, granite work i/c other miscellaneous works in chemistry deptt. in hp university, shimla-5.

CTN :45458809

01 Jul, 2026 NA

Hamirpur(Hp) - Himachal Pradesh

Tender For providing, supply & installation of aluminum works/ addition/ alteration etc.

CTN :45439992

19 Jun, 2026 10.00 Lacs

Leh - Jammu And Kashmir

Tender For supply of wooden paneling work for 12 by 10 room , tiles flooring complete material and finishing , aluminum work for front elevation and windows , electric wiring lights and electric accessories , curtains matting and interior finishing , exterior surface treatment and protective coating work , wooden paneling for front elevation including ladakh design , cupboard almirah and wooden shelves installation , pv paneling for rear wall , aluminum door installation , labour charges installation and final finishing

CTN :45252255

08 Jun, 2026 NA

Kamrup - Assam

Tender For bid to ras supply of supply installation testing and commissioning of 58.5 kva cpcb iv plus compliant genr set efficient crdi system 02e series low emission high efficiency engine diesel genr set , fabrication and supply of 4 wheeled trailer complete all as specified and directed thehnical specifications and store list attached , on load change over switch metal enclosure 415 volt amps 50 hz ac 4 pole 100 amp capacity with side handle conform to is 13947 part 3 of 2607 make gloster or plaza or paragon or equivalent , cable xlpe insualted screened pvc bedded galvanised steel strip or wire armored electric power cable heavy duty 1100 volts grade with multi stranded aluminum conductor , mobile earthing electrode of size 65 mm dia 1.2 mtr long body materials ss 304 l central conduction spl conrrosion complete with copper lugs and nuts bolts and washers , gi pipe light grade of size 40 mm dia for protection of earthing strip make jindal or tata or kalinga , copper strip of size 32 x 6 mm for earth continuty condutor

CTN :45371175

08 Jun, 2026 4.12 Lacs

Madanapalle - Andhra Pradesh

Tender For supply & delivery of submersible pumpset with accessories connecting ramireddy layout 5th cross extension at 32nd ward in madanapalli municipality- fabrication ,transportationand and supply of wall mounted control panel board of size 600x600x250mm made of 18 swg crca sheet steel enclosure, 14 swg mounting plate for cable entry fabricated , painted with two coats of red oxide primer and two coats of grey paint, lock and key arrangements two side lovures with weld mesh inside etc., complete consisting of the following equipment with all internal wiring using l&t / finolex copper frls cables of suitable size and capacity and cable clamp etc complete for 3 phase motor pump sets note: panel board should contain 1) voltmeter ; 0-500 v 96x96mm size. -1 no 2) 0 to 20 amps / 0 50 amps ammeter (96x96mm size). 1no 3) single phase preventor of suitable range - 1no. 4)32 a tp, 10ka mcb. - 1no 5) indication lamps (r-y-b) with switch control - 1set 6)voltmeter & ammeter selector switch - 2 nos 7)supply and fixing of isi mark suitable capacitor ref: mat-03715 makes: l&t/bch 15 hp - 20 hp panel board , labour charges for erection of three phase submersible pumpsets (bore well type) 15 hp pumpsets including pipe connection for suction and delivery and all labour charges etc., complete., (s.no: 11.3.17) , supply & fixing 50mm dia nominal bore gi pipe medium grade properties & weight as per is 1239 isi mark with gi fittings including the cost of pipe & its fittings & labour charges. jindhal/tata ref: bmw-f.89 , supply and delivery of 7/16 aluminum service wire as directed by engineer in charge ( as per quotation ) , supply and transportation of 15hp, 16-24 stage,5star rated submersible motor pumpset, confirming to is 8034 and motor confirming to is 9283 with waterproof winding, pump shall be suitable for various delivery head and discharge with stainless steel shaft. motor suitable for working on 415v ± 10%, three phase 50 hz ac supply etc complete for 6" bore well. makes: as per list of recommended brands as category i. makes: texmo / cri ref: mat03667 ( iteam code : m ) elec5.4.5 , supply of 3 core 4 sqm isi marked flat copper cable of isi for submersible motors confirming to is: 694:1990.makes: as per list of recommended brands as category i.makes:finolex ref: mat-02796 (elec1.6.3) , supply, delivery & fixing of 2" flange sets as directed by engineer in charge as per quotation , supply, delivery & fixing of 2" gi bends as directed by engineer in charge as per quotation , supply, delivery & fixing of 2" gi bits pipe as directed by engineer in charge as per quotation , supply, delivery & fixing of 2" gi bore cap as directed by engineer in charge as per quotation , supply, delivery & fixing of 2" gi coupling as directed by engineer in charge as per quotation , supplying & fixing gunmetal (gm) horizontal check (non return) valve as per is-778 i-class heavy duty - 50 mm nb size ref: mat-01856 ( bmw-f.39 )

CTN :45371179

08 Jun, 2026 4.12 Lacs

Madanapalle - Andhra Pradesh

Tender For supply & delivery of submersible pumpset with accessories connecting at reddys colony extension(near appartments) at ward no 32 in madanapalli municipality- fabrication ,transportationand and supply of wall mounted control panel board of size 600x600x250mm made of 18 swg crca sheet steel enclosure, 14 swg mounting plate for cable entry fabricated , painted with two coats of red oxide primer and two coats of grey paint, lock and key arrangements two side lovures with weld mesh inside etc., complete consisting of the following equipment with all internal wiring using l&t / finolex copper frls cables of suitable size and capacity and cable clamp etc complete for 3 phase motor pump sets note: panel board should contain 1) voltmeter ; 0-500 v 96x96mm size. -1 no 2) 0 to 20 amps / 0 50 amps ammeter (96x96mm size). 1no 3) single phase preventor of suitable range - 1no. 4)32 a tp, 10ka mcb. - 1no 5) indication lamps (r-y-b) with switch control - 1set 6)voltmeter & ammeter selector switch - 2 nos 7)supply and fixing of isi mark suitable capacitor ref: mat-03715 makes: l&t/bch 15 hp - 20 hp panel board , labour charges for erection of three phase submersible pumpsets (bore well type) 15 hp pumpsets including pipe connection for suction and delivery and all labour charges etc., complete., (s.no: 11.3.17) , supply & fixing 50mm dia nominal bore gi pipe medium grade properties & weight as per is 1239 isi mark with gi fittings including the cost of pipe & its fittings & labour charges. jindhal/tata ref: bmw-f.89 , supply and delivery of 7/16 aluminum service wire as directed by engineer in charge ( as per quotation ) , supply and transportation of 15hp, 16-24 stage,5star rated submersible motor pumpset, confirming to is 8034 and motor confirming to is 9283 with waterproof winding, pump shall be suitable for various delivery head and discharge with stainless steel shaft. motor suitable for working on 415v ± 10%, three phase 50 hz ac supply etc complete for 6" bore well. makes: as per list of recommended brands as category i. makes: texmo / cri ref: mat03667 ( iteam code : m ) elec5.4.5 , supply of 100a, 415v porcelain rewireable fuse units. makes: as per list of recommended brands.makes:c&s/standard/hpl/ sputnik / million / gold medal /gm/ benlo/anchor ref : mat02946 ( elec2.7.1 ) , supply of 3 core 4 sqm isi marked flat copper cable of isi for submersible motors confirming to is: 694:1990.makes: as per list of recommended brands as category i.makes:finolex ref: mat-02796 (elec1.6.3) , supply, delivery & fixing of 2" flange sets as directed by engineer in charge as per quotation , supply, delivery & fixing of 2" gi bends as directed by engineer in charge as per quotation , supply, delivery & fixing of 2" gi bits pipe as directed by engineer in charge as per quotation , supply, delivery & fixing of 2" gi bore cap as directed by engineer in charge as per quotation , supply, delivery & fixing of 2" gi coupling as directed by engineer in charge as per quotation , supplying & fixing gunmetal (gm) horizontal check (non return) valve as per is-778 i-class heavy duty - 50 mm nb size ref: mat-01856 ( bmw-f.39 )

CTN :45371173

08 Jun, 2026 2.48 Lacs

Krishna - Andhra Pradesh

Tender For supply & delivery of submersible pumpset with accessories connecting at anjaneyaswamy temple krishna nagar, 27th ward in madanapalli municipality- fabrication ,transportationand and supply of wall mounted control panel board of size 600x600x250mm made of 18 swg crca sheet steel enclosure, 14 swg mounting plate for cable entry fabricated , painted with two coats of red oxide primer and two coats of grey paint, lock and key arrangements two side lovures with weld mesh inside etc., complete consisting of the following equipment with all internal wiring using l&t / finolex copper frls cables of suitable size and capacity and cable clamp etc complete for 3 phase motor pump sets note: panel board should contain 1) voltmeter ; 0-500 v 96x96mm size. -1 no 2) 0 to 20 amps / 0 50 amps ammeter (96x96mm size). 1no 3) single phase preventor of suitable range - 1no. 4)32 a tp, 10ka mcb. - 1no 5) indication lamps (r-y-b) with switch control - 1set 6)voltmeter & ammeter selector switch - 2 nos 7)supply and fixing of isi mark suitable capacitor ref: mat-03715 makes: l&t/bch 15 hp - 20 hp panel board , labour charges for erection of three phase submersible pumpsets (bore well type) 15 hp pumpsets including pipe connection for suction and delivery and all labour charges etc., complete., (s.no: 11.3.17) , supply & fixing 50mm dia nominal bore gi pipe medium grade properties & weight as per is 1239 isi mark with gi fittings including the cost of pipe & its fittings & labour charges. jindhal/tata ref: bmw-f.89 , supply and delivery of 7/16 aluminum service wire as directed by engineer in charge ( as per quotation ) , supply and transportation of 15hp, 16-24 stage,5star rated submersible motor pumpset, confirming to is 8034 and motor confirming to is 9283 with waterproof winding, pump shall be suitable for various delivery head and discharge with stainless steel shaft. motor suitable for working on 415v ± 10%, three phase 50 hz ac supply etc complete for 6" bore well. makes: as per list of recommended brands as category i. makes: texmo / cri ref: mat03667 ( iteam code : m ) elec5.4.5 , supply of 3 core 4 sqm isi marked flat copper cable of isi for submersible motors confirming to is: 694:1990.makes: as per list of recommended brands as category i.makes:finolex ref: mat-02796 (elec1.6.3) , supply, delivery & fixing of 2" flange sets as directed by engineer in charge as per quotation , supply, delivery & fixing of 2" gi bends as directed by engineer in charge as per quotation , supply, delivery & fixing of 2" gi bits pipe as directed by engineer in charge as per quotation , supply, delivery & fixing of 2" gi bore cap as directed by engineer in charge as per quotation , supply, delivery & fixing of 2" gi coupling as directed by engineer in charge as per quotation , supplying & fixing gunmetal (gm) horizontal check (non return) valve as per is-778 i-class heavy duty - 50 mm nb size ref: mat-01856 ( bmw-f.39 )

Corporations And Associations And Others

CTN :45365256

08 Jun, 2026 1.15 Crore

Delhi - Delhi

Tender For construction of ayam by providing brick work, rcc items, cpvc pipes, tiles, aluminium works, painting, sanitary items etc at mcw sahabad in ward no. 29 pooth khurd in narela zone. - construction of ayam by providing brick work, rcc items, cpvc pipes, tiles, aluminum works, painting, sanitary items etc at mcw sahabad in ward no. 29 pooth khurd in narela zone.

Aluminum Work Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

State Government

Corporations And Associations And Others