Latest aluminum Tenders | Government aluminum Tenders

CTN :43169879

23 Dec, 2025 NA

Bangalore - Karnataka

Tender For supply of all cast aluminum trimming unit

CTN :42882167

20 Dec, 2025 NA

Rayagada - Odisha

Tender For corrigendum : supply of grinding wheel-aluminum oxide, 180 x 13 x 31.75mm aa60k5v8,single point cutting tool-blank tool, 12 x 12 x 150 mm,oil stone-triangular,6mm x 150mm,hss drill bit, dia 5mm,hss drill bit, dia 4mm,hss drill bit, dia 3mm,hss end mill cutter 4 fluids, dia 4mm,power hack saw blade, 400 x 32 x 1.60mm x 6tpi,shcs full thread, m8 x 40mm,shcs full thread, m10 x 40mm,shcs full thread, m12 x 40mm,shcs full thread, m6 x 16mm,csk, m5 x 16mm

Central Government/Public Sector

CTN :42884675

20 Dec, 2025 NA

Imphal - Manipur

Tender For corrigendum : supply of foldable aluminum step ladder, 10 ft. (height) , 8 ft. (height) aluminium folding type step ladder , aluminium tiltable telescopic tower extension ladder , underground cable fault locator

corporations/Associations/Others

CTN :43167915

16 Dec, 2025 NA

Aluva - Kerala

Tender For auction sale of battery cells,dg cat - 1,dg cat - 2,dg cat - 3,ac,piu,smps,sps/spsm/sp,ms scrap,electrical scrap,stabilizer,tower scrap,battery strip copper (insulated),fire extinguisher,aluminum cable,micro cooling (mcu),copper cable (insulated),lcu-copper

State Government

CTN :43179756

09 Jan, 2026 NA

Dinajpur - West Bengal

Tender For supply and fitting fixing of street light (20 watt ) with motion cesensor section with in 15ft automatic off on during morning and evening cool white light (120 lm/w) (make in india product) water proof, p66, aluminum body with 4 years warranty

State Government

CTN :43139336

31 Dec, 2025 4.34 Lacs

Multi City - Telangana

Tender For supply of safety items - gloves rubber acid proof 16 inch gloves should be resistant for highly concentrated acid and bases., goggle, chemical splash protective goggles should be resistant for highly concentrated acid and bases., chemical protection suit, this suit must cover all the body size: xxl, protection coverall suit must be resistant for highly concentrated acid and bases., acid gases e2 cannister (en 148-1 class 2), gum boots size 10 inch gum boots must be resistant for highly concentrated acid and bases., self-contained breathing apparatus (complete kit including cylinder), self contained open circuit automatic positive pressure compressed air breathing apparatus set confirming to en137:2006 type 2 and cbrn approved, with 6.8 liters/300 bar aluminum lined fully wrapped carbon composite material compressed air cylinders approved to en 12245 and ce marked, as per following specifications., complete specifications are attached in a separate sheet., copy of following approvals shall be attached with bid., scba set: ce marked, en 137: 2006 type 2 approval and cbrn approval., facemask: en 136: class 3, cylinder: ce marked en 12245 and ccoe approved, cylinder valve: en 144 approved, venus v-44 + ffp1s fold flat mask, gloves, size:14 inch, material: asbestos gloves must be with high quality material and should be durable., apron suitable to handle sulphuric acid (h2so4), apron should be with long sleeves and bottom up to knee., size: xxl apron should be resistant for highly concentrated acid and bases., face shield, the face shields must be resistant for highly concentrated acids and bases.

CTN :43140429

25 Dec, 2025 34.90 Lacs

Khetri - Rajasthan

Tender For - arc of electrical material. - electrical work :, providing & fixing of ik08, ip 66 protected led street light luminaire on existing bracket/pole. fixture made of powder coated single piece pressure die cast aluminum material with heat dissipation fins on housing with uv stabilized pc (uv stablization report submitted for uv cover ) /toughened glass cover and secondary lens on each led & should be smd type of 3 to 5 watt each . the system efficacy >=125 lm/ wt and potted driver & has a unique bis r number with input voltage ac 120 to 270 v ac with high voltage cutoff @>=300 v ac and auto resetting safety , power factor >0.95 driver efficiency >85% ,thd(i) 10% humidity 10% to 90% rh working temp -5c to 45c . driver current 750ma. the luminaire shall be bis certified and trade mark certified. life expectancy equal or more than 50000 burning hrs with minimum 70% lumen maintened , cri >70 and cct 5700k +355k. surge protection shall be min 4 kv internal and min 10 kv external inside driver compartment. driver should be phase to phase protection of 440 v for 4 hrs. manufactures word mark/name engraved/embossing on die cast housing to allow traceability/authenticity. fixture shall be as per is 10322 complianced.oem must have its own in house nabl lab setup for all testing facilities for led fixtures. (lm79/lm80) certificate/ report with liable warranty of product/accessories from oem shall be submitted. all as per pre approved by engineer in-charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . led street light fixture with minimum lumen output 5600 lm, supplying and drawing of xlpe insulated lt aerial bunched aluminium conductor cable confirming to is 14255/1995 and is 398 (pt-4)/ 1994 and as per discom specs. on existing cross arms through i hook with all necessary t&p required including binding and twisting etc. complete in all respect as required. all as per pre approved by engineer in-charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . 1 x 25 sq. mm. + 1x25 sq. mm. (insulated), supply and fixing of 11 kv pin insulator confirming to is:731:1971 with latest ammendment on existing bracket including all accessories like ms forged hot dipped gi pin confirming to is 2486(part-i)/1993 & is:2486 (part-ii)/1989 with latest amendment, and as per latest discom specs. etc. as required. all as per pre approved by engineer in-charge.for additional technical parameters of product / work refer annexure a attached with this bsr, sitc of ip-42 and general construction confirming to is:8623 : 1993, wall/ free standing floor mounted dust and vermin proof compartmentalised cubical panel as specifications and other parameters required as per point (a) ,(b), (c),(d), (e), (f), (g), (h) as below:-(a)thickness of crca sheet shall be 2.0 mm, cable alley compartments having concealed hinged type doors with key type lock with / without detachable extension type structure. removable 3 mm. thick sheet steel gland plates with appropriate size of knockouts for cables shall be provided(b)complete panel shall undergo a process of degreasing, water rinsing, activation, derusting, pickling in acid bath, phosphatising & shall be subjected to nine tank process and then powder coated with approved shade of minimum 70 microns on both side of panel. the panel having pe foam/ neoprene rubber gasket of not less than 3mm thickness ,required hardware , concealed hinged door with key type locking arrangement for equipment/switchgear earthed with 2.5 sq.mm braided copper wire.[c) interconnection between bus bar and switchgears /cable shall be rigidly supported and made out by flexible copper wires (up to 63 amp ) and by solid bus bar (>63 amp ) . control wiring will be carried out with 1.5 sq.mm, earth wire with 2.5 sq.mm and ct with 2.5 sq.mm flexible copper wire only. all joints / interconnections of copper bus bar shall be dully tinned . c

CTN :43146016

13 Dec, 2025 9.00 Lacs

Bharatpur - Rajasthan

Tender For open tender for installation of grills in balconies, replacement of broken glass in windows and gates and construction of aluminum frame partitions in the academic block, nursing hostel, boys hostel, residence hostel and girls hostel of this medical college.

corporations/Associations/Others

CTN :43155813

16 Dec, 2025 NA

Kamrup - Assam

Tender For auction sale of ac,battery cells,dg cat - 1,dg cat - 2,battery chiller,dg battery(with electrolytes),ipms,lcu aluminium,lcu-copper,piu,ppc cat-3,ppc cat-1,smps,tower scrap,dg cranking,electrical scrap,transformer,shelter panel,fcu - free cooling unit,aviation lamp,fiber and plastic,aluminum cable

State Government

CTN :43157076

24 Dec, 2025 6.90 Lacs

Parlakhemundi - Odisha

Tender For repair and renovation of 30 men baarack at dpo premises paralakhemundi (such as providing grading concrete, tiles, aluminum partioning inside and outside painting etc.) in the district of gajapati.

Aluminum Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

corporations/Associations/Others

State Government

State Government

corporations/Associations/Others

State Government