Latest alumital supplies Tenders | Government alumital supplies Tenders

Central Government/Public Sector

CTN :44122217

12 Mar, 2026 9.27 Lacs

Faridkot - Punjab

Tender For supply of 1200 mm sweep bldc ceiling fan with 5 star bee , heavy duty exhaust fan metallic body 230 v 450 mm sweep 900 rpm , 20 watt 6500 k led batten lighting fixture with aluminum hosing integrated electronic driver directly on ceiling wall , 09 watt led downlighter light panel comprises of shm design led , 100 watt led flood light fittings made of pressure die cast aluminium housing with toughened glass and high power leds and secondary lenses with ip 66 protection

Central Government / Public Sector

CTN :44157525

02 Mar, 2026 NA

Chennai - Tamil Nadu

Tender For supply of axial fan 130mm sweep, 2800 rpm, 115v ac 41 watts, 50 hz, die cast aluminum housing to icf drawing no. icf/sk-7-6-177 (alt.-b) and conforming to is:3588 to suit railway ac coaches similar to model no. w2s-130-aa25-01 of m/s ebm-nadi international pvt. ltd., chennai (or) equivalent specification, type axial fan impeller diameter 130mm (6 inches), speed 2800 rpm. air volume 325 cmh, power input 41w, voltage:115v ac, frequency 50 hz, noise level 49db (a) housing die cast aluminum impeller sheet steel, bearing ball bearing.

Corporations And Associations And Others

CTN :44011913

21 Feb, 2026 1.82 Lacs

Delhi - Delhi

Tender For provisiont of material and hiring of labour for day to day maintenance of park lights in ward no 57 pitampura under keshav puram zone. - abc, supply of xlpe insulated pvc sheathed al. conductor un- armoured cable 1.1 kv grade conforming to is-7098 of following size- (a) 2x6 sq mm, supplying, installation, testing & commissioning of street light led fixture, powder coated pressure die cast aluminum body with built in or separate driver as per the requirement with driver efficiency >85%, input voltage: 140-270 volt ac, freq 50/60 hz, operating temp range -15 deg to 50 deg centigrade, internal surge protection of 5 kv l,n,e as per iec 61000-45, driver efficiency >85%,thd 10% as per iec 61000-3-2 , p. f. 0.95, ip66,ik-10, cri >80 , under voltage and over voltage protection,emiemc as per cispr-15, lenses for beam angle as per iesna type i/ii/iii as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (led,driver & electrical circuitry) of minimum 50000 burning hours with 70% of initial lumen maintained till life ends as per lm80 extrapolation ies tm-21-11 report , cct 3000 k / 4000 k / 5700 k /6000 k/6500 k (as per ansi bin) , sdcm(standard deviation color matching) 5, maximum power consumption should not more than the specified rating and fixture shall be of relevant bis standard complete in all respect i/c connections with 1.5 sq mm frls, pvc insulated copper conductor single core cable and earthing etc. as required with minimum 5 year oem warranty. system lumen efficacy >135 lm/watt output . lm79 & lm80 test report from nabl lab for all testing required for led fixtures as per bis shall be submitted. shape size and cct shall be as approved by engineer-in-charge as per requirement. (thermal management: heat sink of aluminum housing such that led junction temperature shall not rise above 90 c), supply and fixing of 32mm dia x 1 meter long g.i. pipe (medium class) bracket for mounting of fluorescent/hpmv/hpsv street light fitting on pole including bending the pipe to the required shape , 2 nos 25mm x 6mm flat iron clamps with nuts, bolts and washer , painting the flat iron with primer and finish paint etc. as reqd., supply of pvc insulated and fr pvc sheathed multicore copper conductor 1.1kv grade, conforming to grade is 694 as required . 3*1.5 sq.mm, providing following labour for day to day maintenance of electrical installation in various municipal buildings and park lights including required t&p etc. in one shift on daily basis on all working days (required matenance material will be provided by department) as required as per terms and condition of the department (excluding parts) complete as required (a) one wireman - skilled

Central Government/Public Sector

CTN :44047661

26 Feb, 2026 NA

Katipala - Karnataka

Tender For tender for supply of 3000026364 governor spares - tg13-pump-tg gerotor , .250 thick , aluminum case-governor p/n a8516- 039 , d8516-038 , g8516-039 , f8516-039 & 8516-179 & 8516-175 sr no -16962964 , 5007360 , 16610879 , tg13-cover-ballhead (stamping)-governor p/n a8516-039 , d8516-038 , g8516- 039 , f8516-039 & 8516-179 & 8516-175 sr no - 5007360 , 16962964 , 11972786 , 16610879 , tg13-plunger-tg10 pilot valve-governor p/n a8516-039 , d8516-038 , g8516- 039 , f8516-039 & 8516-179 & 8516-175 sr no - 5007360 , 16962964 , 11972786 , 1002583 , 16610879 , tg13-shaft-drive-governor p/n a8516-038 , d8516-038 , 8516-038 sr no - 16962966 , 17571478 , 17471565 , tg13-housing-tg pump , .250 thick , aluminum case-governor p/n a8516- 039 , g8516-039 , f8516-039 & 8516-179 & 8516-175 sr no - 16962964 , 5007360 , 16610879 , tg13-flyweight-governor p/n a8516-039 , g8516-039 , f8516-039 , d8516- 038 , 8516-179 , 8516-175 sr no - 5007360 , 11972786 , 16962964 , 10025830 , 16610879 , 120 , tg13-kit-tg o.h. repair (8934-187)-governor p/n a8516-039 , g8516- 039 , d8516-038 , f8516-039 & 8516-179 & 8516-175 sr no - 5007360 , 11972786 , 16962964 , 1661087910 , 120 , tg13-gasket-tg mounting-governor p/n a8516-039 , d8516-038 , g8516- 039 , f8516-039 & 8516-179 & 8516-175 sr no - 5007360 , 16962964 , 11972786 , 10025830 , 16610879 , tg13-shaft-tg10 terminal-governor p/n a8516-039 , g8516-039 , f8516-039 & 8516-179 & 8516-175 sr no - 5007360 , 11972786 , 10025830 , 1209566 8 , 16908278 , pgd-plunger-pg pilot valve(positive lap)-governor p/n f8572-105 & sr no 17088835 , pgd-ballarm-pg(196107 ballarm)-governor p/n f8572-105 & sr no 17088835 , pgd-shaft-drive(pg , 1.125-48 serr. , 3.906 long)-governor p/n f8572-105 & sr no 17088835 , pgd-valve-pg rotation check(inlet)-governor p/n f8572-105 & sr no 17088835 , pgd-valve-pg rotation check(outlet)-governor p/n f8572-105 & sr no 17088835 , pgd-piston-accumulator-governor p/n f8572-105 & sr no 17088835 , pgd-gear-pg idler(.562 thick)-governor p/n f8572-105 & sr no 17088835 , pgd-gear-pg drive(.562 thick)-governor p/n f8572-105 & sr no 17088835 , pgd-piston-pg buffer(1.750 long)-governor p/n f8572-105 & sr no 17088835 , pgd-gauge-pg oil(wp , metric)-governor p/n f8572-105 & sr no 17088835 , pgd-needle valve-governor p/n f8572-105 & sr no 17088835 , pgd-o/h kit-governor p/n f8572-105 & sr no 17088835 , pgd-wiper scraper(.625 shaft dia , 1.128) ) , p/n-8577-1175 , sr. no.-20016639 , pgd-seal oil(.625 shaft dia , 1.128 od) , p/n-8577-1175 , sr. no.-20016639 , pgd-gasket-pg power case to cylinder , p/n-8577-1175 , sr. no.-20016639

CTN :43839318

11 Feb, 2026 1.81 Lacs

Jodhpur - Rajasthan

Tender For 01/2025-26 nilami - ms soap 527 kia , wrench vice 120 mm 12 no, , hexa pom 300 mm 30по, , flatt file 200 mm 11no, , half round file 150 mm 6po, , half round file 150 mm 2no, , flat file 2 cut 250 mm 9no, , tri swityar 100 mm 3по, , gate ball 25 mm 3по, , ms scrap 885 kg, , brought 21 kg, , aluminum 4.580 kg, , armedhar and dush 1 each, , see ylamp. dava, , beny vice 100 mm 2no, , fire bucket 02 no, , ms scrap 16 kg, , common housing in line pump 01, , hand file 200 mm blo, , triangular file 150 мм 2по, , d e spencer 09, , ring spanner 06, , glass color, , 16, , steel tape 03, , leather gloves 04, , wire versh, , safety googles, , glass color 16, , printer

Central Government/Public Sector

CTN :43844073

10 Mar, 2026 NA

Mysore - Karnataka

Tender For supply of aluminum tags on the axle box housing.

corporations/Associations/Others

CTN :43856727

25 Feb, 2026 7.10 Lacs

Navsari - Gujarat

Tender For providing and fixing of 1 x 250-watt led luminaries - energy efficient flood light with complete allied accessories having features like powder coated, aluminum housing,heat resistant toughened glass provided with gasket (philips/cgl/bajaj/ge/osram/wipro or equivalent make) at 400kv vav sub station.

Central Government/Public Sector

CTN :43659106

24 Feb, 2026 NA

Cuddapah - Andhra Pradesh

Tender For tmpl/pur/rc/kc-09 ammonia compressor spares/216/386 - crank shaft assembly complete (part no.340.03.001.50 ), bearing bush (std) pump end (part no.082.28.050.50 ), thrust ring bronze (part no. 336.02.004.50 ), thrust ring steel (part no.336.03.005.50 ), driving plate (part no. 082.28.060.50), retaining plate assembly (part no. 336.14.114.50), bearing bush (std) drive end (part no.336.02.003.50 ), connecting rod bolt (part no. 082.04.040.51), bearing intermediate half (std) (part no.086.15.030.50 ), shaft seal (part no.082.08.000.50 ), piston assembly (part no.082.03.000.50 ), plate safety (piston) (part no.082.03.040.50 ), set of piston rings (part no.082.03.150.50 ), big end bearing half std (part no.082.04.030.50 ), gudgeon pin (part no.082.03.020.50 ), connecting rod with bolt (part no.082.04.070.50 ), delivery valve assembly (part no. 336.12.003.50), suction valve spring (part no.336.12.001.50 ), suction valve ring (part no.082.28.130.50 ), suction stroke limiter (part no. 336.12.002.51), cup spring (part no. 336.12.011.50), cylinder liner assembly (part no.336.04.000.50 ), cylinder liner(part no. 336.04.001.51), safety plate (connecting rod) (part no. 082.04.050.50), unloader piston assembly (part no. 336.05.007.50), oil pump assembly (part no. 082.07.000.50), filter wire gauge (part no. 336.10.009.50), paper filter (part no.351.09.014.50 ), suction filter assembly (part no. 336.10.023.50), discharge filter assembly (part no.336.10.031.50 ), tah-8 valve assembly (part no. 351.09.003.50), hex nut (connecting rod nut) (part no. 082. 04. 100 .51), spring (vld piston) (part no.336. 05 .002 .50 ), kit delivery valve ring and springs (part no.085.28.08 ), teflon ring (vld piston) (part no. 336.05.006.50), spring (oil regulator) (part no.082.09.020.50 ), oil level glass (part no.082. 28. 170. 50 ), ball dia 16 (part no. 999. 30 .785. 50), k5 valves (part no. 082. 16.001. 50), stud (short) m16 x35 (part no. 999.03.700.50), stud (long) m16 x65 (part no.999.03.710.50 ), hexagonal hd screw m16x35 (part no. 999.01.690.50), set of safety valve parts (part no.336.13.00 ), kit gasket/ o rings/ all packing for kc-9 compressor (part no. 852801), kit oil pump gear (part no. 0852805), kit liner parts(part no.0852810 ), kit-shaft seal o ring (part no.0852804 ), intermediate bearing assembly (part no.086.15.040.50 ), hex nut m16 (head cover) (part no. 999.06.687.50), bearing cover assembly drive end (part no.336.02.001.50 ), bearing cover assembly pump end (part no.082.02.001.50 ), stud for bearing cover m12 x 125l (part no. 999.03.688.50), stud for bearing cover m12 x 100l (part no. 999.03.683.50), hex nut m12 (part no.999.06.650.50), solenoid valves for kc-9 compressor (part no. 082.25.030.50), key for flywheel / shaft key (part no.082.28.191.50 ), fly wheel / compressor pulley - kc 9 (part no.350.01.033.50), oil return valve (part no. 082.06.000.50), kc buffer springs (part no.080.04.020.50 ), gudgeon pin bush (part no.082.04.020.50 ), piston (part no.080.03.110.50 ), gasket kpgm 3/b (head gasket) (part no.082.28.670.50 ), ring teflon (safety valve) (part no.336.13.002.50 ), aluminum packing set (part no. 082.19.003.50), o-ring set for kc-09 (part no.080.19.005.50 ), gasket set (part no.080.19.001.50 ), gasket round flange 150 nb (part no. 993.00.311.00), hex. head bolt m 10 x 70 (part no. 999.01.655.50 ), housing for piston (part no. 082.10.090.51), shaft seal cover (part no.082.28.160.50 ), spring (leaver) (part no.082.10.050.50 ), springs (oil filter) (part no.336.10.006.50 ), springs (suction filter) (part no.082.12.040.50 ), spring (vld) (part no. 336.05.002.50), curtation spring (part no.082.100.080.50 ), set of pistons & springs (oil pump) (part no. 820706 to 820715), cranck case heater (part no.082.26.173.50 ), ferrule (part no.999.16.001.50 ), union nut (part no. 999.16.063.50), top housing assembly suction (part no.336.10.035.50 ), top housing assembly discharge (part no.336.10.036.50 ), reducing nipple (part no.336.14.111.50

Alumital Supplies Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government / Public Sector

Corporations And Associations And Others

Central Government/Public Sector

Central Government/Public Sector

corporations/Associations/Others

Central Government/Public Sector