Latest ammeter scrap Tenders | Government ammeter scrap Tenders

Central Government/Public Sector

CTN :45713835

18 Jul, 2026 30.00 Lacs

Mumbai - Maharashtra

Tender For repair/replacement of external electric supply distribution network with other connected items at malad, marve and kandivali under ge (n) santacruz, mumbai - supply, install, testing & commissioning pedestal cubical type double door lt bus bar chamber box of suitable size factory made modular construction fabricated out of 3 mm thick crca sheet, angle iron, channels, epoxy powder coated to give a superior finish , outdoor type , totally enclosed dust & vermin proof with locking arrangements front & back side opening system including rain shed, busbar chamber should be suitable for accomodating all aluminium bus bar strips (50mm x 10mm x 04 nos) & gi strip for earth fixed on porcelain insulators, and one independent metering module suitable for accomodating three phase volt meters & ammeter digital type, indicator lamps, cable entry/exits cut outs at bottom part, with fixing arrangement on pcc (1:3:6) type c-2 bed block with studs, bolts, nuts & washers, danger notice board with scull suitable for 415 volts or required size to be fixed on pannel including dismantling of old bus bar panel all as specified and directed by engr-in charge.notes:-(a) aluminium bus bar duly covered with colour coded shrinkable sleeves of required size for phases and neutral - 01 set(b) mccb 4 pole , ics=100%icu- 25 ka, 415 volts, 100 amps , with thermal adjustable and fixed magnetic setting with extended terminals -02 nos.(c) digital multifunction meter of size 96x96 mm to measure current, voltage, frequency and power factor with built in selector switch and programable ct of appropriate ratio.-01 no make- imp/automatic electrical(ae)/ l&t / havells/ meco(d) panel indicating lamp neon/led type (red ,yellow & blue) with lamp holders - 03 nos(e) panel instrumental wiring with frls suitable size but not less than 2.5 sqmm copper wire single core - 01 job(f) necessary sizes of lugs for fixing of cables in bus bar deemded to be included rate quoted by the contractor.make of mccb & mcb: larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 36 ka 400 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb, all as specified and directed by engr-in-charge. make:- larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 36 ka 160 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb, all as specified and directed by engr-in-charge. make:-larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 16 ka 100 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb, all as specified and directed by engr-in-charge. make:-larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supply & fixing mccb 4 pole 36 ka 250 amp with adjustable thermal & adjustable magnetic setting, including taking down old unserviceable mccb all as specified and directed by engr-in-charge make:-larsen &toubro/ abb/ siemens/ schneider/ havells/ legrand/ indo asian/ c & s electric/ bhartia cuttler hammer (bch)/benlo, supplying, laying,connecting, testing & commissioning lt ug pvc insulated, heavy duty, 1100 v grade electric cable with aluminium conductor of size 16 sqmm x 4 core, laid in trenches or passing through pipe or fixed to wall, making all connections with and including provision of necessary glands, lugs, bushing etc as required including taking down old unserviceable cable complete all as specified and as directed by engineer-in-charge of following sizes:-note : earthwork excavation, dwc

Central Government/Public Sector

CTN :45714895

18 Jul, 2026 NA

Pune - Maharashtra

Tender For special repairs to lt panels and connected items at pyro, pinaka, nag mixture building, magazine area and ap building in hemrl, pune - taking out old serviceable/unserviceable lt panel/capacitor panel of any description or capacity keeping aside in safe custody for schedule of credit complete all as specified and directed, supply, fixing and commissioning of cpri approved factory made lt cubicle panel board outdoor type conforming to is/iec-61439-1&2 : 2011 with canopy, louvers & shutters made out of 3.15 mm thick crca sheet totally enclosed with necessary ventilations, weather, dust and vermin proof with front and rear opeing and lcoking arrangement, degree of protection ip 56, 415 volts, 3 phase, 4 wire, 50 hz having aluminium bus bar of capacity 1200 amps tpn duly colour coded and for neutral supported with dmc/smc insulator colour coded with heat shrinkable sleeve having short circuit current with minimum 65 ka for one second and suitable for internal connection including instantaneous over load and earth fault relays complete with digial type voltmeter and ammeter inclduing suitable range of cts of metering, selector switches for voltmeter and ammeter, set of three led type indicating lamps duly wired with suitable size of copper cables and panel board shall be grouted in the ground with suitable size of foundation in pcc 1:2:4 type b1, ms channels 50 x50 x 6mm with nut bolts, wahsers, etc. suitable for fixing with bus duct including comprising of the following:-incoming: (a) acb adjustable type with thermal magnetic release 4 pole, 800a, 415v, 50 ka, 50 hz - 01 no. outgoing: (b) mccb 4p, 400 amps, 36 ka,415v, ac supply including extended rotary handle and spreader terminals fo incoming and outgoing - 03 nos, (c) mccb 4p, 125 amps, 25 ka,415v, ac supply including extended rotary handle and spreader terminals fo incoming and outgoing - 01 nos, (d) panel mounted type digital multifunctional energy meter a, v,z, kw, pf t operated, lt 3 phase, 4 wire inclding ct ratio 200/5 - 04 nos, (e) control mcb c curve, sp, 6 to 32a, 10ka, c curve - 02 nos, (f) led phase indicator (r,y & b) - 01 set. (pyro sub stn), supply, fixing and commissioning of cpri approved factory made lt cubicle panel board outdoor type conforming to is/iec-61439-1&2 : 2011 with canopy, louvers & shutters made out of 3.15 mm thick crca sheet totally enclosed with necessary ventilations, weather, dust and vermin proof with front and rear opeing and lcoking arrangement, degree of protection ip 56, 415 volts, 3 phase, 4 wire, 50 hz having aluminium bus bar of capacity 1200 amps tpn duly colour coded and for neutral supported with dmc/smc insulator colour coded with heat shrinkable sleeve having short circuit current with minimum 65 ka for one second and suitable for internal connection including instantaneous over load and earth fault relays complete with digial type voltmeter and ammeter inclduing suitable range of cts of metering, selector switches for voltmeter and ammeter, set of three led type indicating lamps duly wired with suitable size of copper cables and panel board shall be grouted in the ground with suitable size of foundation in pcc 1:2:4 type b1, ms channels 50 x50 x 6mm with nut bolts, wahsers, etc. suitable for fixing with bus duct including comprising of the following:-incoming: (a) acb adjustable type with thermal magnetic release 4 pole, 800a, 415v, 50 ka, 50 hz - 01 no. outgoing: (b) mccb 4p, 400 amps, 36 ka,415v, ac supply including extended rotary handle and spreader terminals fo incoming and outgoing - 01 nos, (c) mccb 4p, 315 amps, 25 ka,415v, ac supply including extended rotary handle and spreader terminals fo incoming and outgoing - 01 nos, (d) mccb 4p, 250 amps, 25 ka,415v, ac supply including extended rotary handle and spreader terminals fo incoming and outgoing - 02 nos (e) panel mounted type digital multifunctional energy meter a, v,z, kw, pf t operated, lt 3 phase, 4 wire inclding ct ratio 800/5 - 04 nos, (e) con

State Government

CTN :45244313

06 Jul, 2026 1.66 Crore

Gandhinagar - Gujarat

Tender For corrigendum : supply of smart energy meters with head end system services in gift city - 1200009630: 1p2w 240v 10-60a cl-1.0 smart meterdesign, engineering, manufacturing, inspection & testing at manufacturers works before dispatch, supply and delivery at destination (at gift store) of ac whole current 1 phase 2 wire, isi marked, 1.0 class accuracy, 10-60 a smart energy meter with dlms protocol & bidirectional communication facility & remote connect/disconnect switch. the meter shall communicate with head end system (hes) on any one of the communication technologies mentioned in is:16444 part 1 compliant with nbiot communication module fall back to 2g, as per the requirement of the utility for measurement of import and export active energy (kwh) with initial and sustained accuracy of class 1.0 for solidly earthed system with balanced and unbalanced loads having power factor in the range of zero to unity (lagging/leading). the meter shall be compatible to common meter reading instruments and other associated instruments & software for remote reading as per requirements given in this specification, 1200009631: 3p4w 240v 10-100a cl1.0 wc smart meterdesign, engineering, manufacturing, inspection & testing at manufacturers works before dispatch, supply and delivery at destination (at gift store) of ac whole current 3 phase 4 wire, isi marked, 1.0 class accuracy, 10-100 a smart energy meter with dlms protocol & bidirectional communication facility & remote connect/disconnect switch. the meter shall communicate with head end system (hes) on any one of the communication technologies mentioned in is:16444 part 1 compliant with nbiot communication module fall back to 2g, as per the requirement of the utility for measurement of import and export active energy (kwh) with initial and sustained accuracy of class 1.0 for solidly earthed system with balanced and unbalanced loads having power factor in the range of zero to unity (lagging/leading). the meter shall be compatible to common meter reading instruments and other associated instruments & software for remote reading as per requirements given in this specification, 1200009632: 3p4w 240v -/5a cl0.5s ct smart meterdesign, engineering, manufacturing, inspection & testing at manufacturers works before dispatch, supply and delivery at destination (at gift store) of 3 phase 4 wire, isi marked, 0.5s class accuracy, fully static lt current transformer (ct) operated smart energy meter with dlms protocol & bidirectional communication facility. the meter shall communicate with head end system (hes) on any one of the communication technologies mentioned in is:16444 part 2 compliant with nbiot communication module fall back to 2g, as per the requirement of the utility for measurement of import and export active energy (kwh) with initial and sustained accuracy of class 0.5s for solidly earthed system with balanced and unbalanced loads having power factor in the range of zero to unity (lagging/leading). the meter shall be compatible to common meter reading instruments and other associated instruments & software for remote reading as per requirements given in this specification, 1200009630: 1p2w 240v 10-60a cl-1.0 smart meterdesign, engineering, manufacturing, inspection & testing at manufacturers works before dispatch, supply and delivery at destination (at gift store) of ac whole current 1 phase 2 wire, isi marked, 1.0 class accuracy, 10-60 a smart energy meter with dlms protocol & bidirectional communication facility & remote connect/disconnect switch. the meter shall communicate with head end system (hes) on any one of the communication technologies mentioned in is:16444 part 1 compliant with nbiot communication module fall back to 2g, as per the requirement of the utility for measurement of import and export active energy (kwh) with initial and sustained accuracy of class 1.0 for solidly earthed system with balanced and unbalanced loads havin

CTN :45478137

01 Jul, 2026 NA

Vidisha - Madhya Pradesh

Tender For corrigendum : items - computer and servises and otheres, mcb (miniature circuit breaker), acb (3200a/4000a ), acb (air circuit breaker), allen key set, amf relay, ammeter, annunciation system, anti-corrosion spray, arc flash suit, arc flash suit (ht/lt panel ), auxiliary contacts, avr (automatic voltage regulator), battery charger, blower/air blower, breather assembly, bus coupler acb, busbar insulators, busbar supports, cable glands, cable glands, cable lugs, cable ties, cable ties, changeover switch, clamp meter, clamp meter, combination pliers, consumables, contact cleaner spray, contactor, continuity tester, control cable, control fuses, control relay, control wires, cooling fan, copper busbar, crimping tool, ct (current transformer), current transformer (ct), dg set synchronization panel (3 750 kva), digital multimeter, digital multimeter, discharge rod, earth fault relay, earth switch, earth tester, earthing rod, electrical contact cleaner, electrical gloves (11 kv rating), electrical safety gloves, emergency stop switch, energy meter, engine control module, face shield, ferrules, ferrules, flexible wire, frequency meter, fuse fuse base, heat shrink sleeves, heat shrink tubes, hrc fuse, hrc fuses, ht protection relay, indicator lamps (r/y/b), infrared thermometer / thermal camera, insulated screwdriver, insulation tape, isolator switch, lightning arrester, load sharing module, lockout-tagout (loto) kit, loto kit, lt pcc/mdb panel, lubricant spray ( ), lugs, maintenance tools, mccb, mccb (molded case circuit breaker), megger (insulation tester), megger 5 kv, microfiber cloth, motorized mechanism, multifunction meter, multifunction meter, nose pliers, numerical protection relay, oti (oil temperature indicator), over current relay, overload relay (olr), phase sequence meter, phase sequence tester, plc module, power analyzer, power cable, power factor meter, protection & metering, pt/vt (potential transformer), push buttons (start/stop), pvc insulation tape, reverse power relay, rust remover, safety equipment, safety goggles, safety helmet, safety helmet, safety shoes, safety shoes, screwdriver set, secondary injection test kit, selector switch, shunt trip coil, side cutter, silica gel, smps (power supply), soft brush, spanner set, speed governor module, spiral wrapping, spring charging motor, starting relay, synchronizing relay, terminal blocks, thermal camera, thermostat, timer relay, torque wrench, transformer buchholz relay, transformer oil, under/over frequency relay, under/over voltage relay, uv coil, vacuum cleaner, vcb (vacuum circuit breaker), voltage tester, voltmeter, wire markers, wire stripper, wti (winding temperature indicator), , , , comprehensive maintenance of substation, transformer, panels, synchronization panel a including all consumables, accessories, minor & majour spares, cleaning materials, testing instruments, preventive maintenance and breakdown maintenance complete., annual maintenance of substation, transformer, panels, synchronization panel a including all consumables, accessories, minor spares, cleaning materials, testing instruments, preventive maintenance and breakdown maintenance complete.

corporations/Associations/Others

CTN :45683923

09 Jul, 2026 NA

Sindhanur - Karnataka

Tender For auction sale of 25kva transformer with winding & without oil,63kva transformer with winding & without oil,100kva transformer with winding & without oil,ms iron material,released steel from rcc poles skeleton etc.,,angle iron material, lt protection kit & scrap ab cable,single phase meter qty:182 nos,scrap 2/4/rabbit conductor & rabbit acsr conductor,ht metering cubical box,ct & pts,secure meters

State Government

CTN :45669225

01 Jul, 2026 NA

Kangra - Himachal Pradesh

Tender For tender for supply of equipment material, design, erection, testing and commissioning for sop to improvement and augmentation of lis bharoli phaseii 1 no tube well of 15 hp at village pant in electrical section bharoli under esd hpsebl noi jawalamukhi - steel tubular poles 10 mtr. long muff for steel tubular pole with concrete filling aaac conductor 7/3.81, 80 sq. mm (includes 3 conductor length and additional 1% sag (sag, jumpering and wastage)) single continuous earth wire (g.i wire 8 swg) x-arm cl 100x50x6 mm, length 2800 mm x 2 nos for incommer line x-arm cl 75x40x6 mm, length 2800 mm x 4 nos for supporting do fuse unit & go switch go switch handle supporting cl 75x40x5 mm, length 460 mm go ab switch unit (11kv, 400a, 25 ka) tripple pole ofd type do fuse unit cross-arm channel iron (100x50x6 mm), length 1270 mm 11 kv pin insulators (porcelain, 12 kv, 10 kn): 3 no. per pole structure al (50x50x6 mm), length 750 mm x-bracing set -ms angle iron 50x50x6, length (2125 mmx2 no } pole top bracket (100x50x6 mm), length 100 mm ht stay set complete stay wire earthing set ht complete in all respect b001 distribution transformer 11/0.4 kv, 25 kva x-arm: [channel iron (100x50x6 mm), length: 2800 mm x 2 nos] ms angle iron (50x50x6 mm), length: 2800 mm x (1 nos for la's) x-arm: [channel iron (75x40x6 mm), length: 2800 mm x 4 nos] for supporting do fuse unit & go switch x-arm [channel iron (100x50x6 mm), length: 2800 mm x 2 nos for transformer bed x-arm [channel iron (100x50x6 mm), length: 460 mm x 2 nos for supporting main channel of transformer ms angle iron (50x50x6 mm), length: 2800 mm x 2 nos ms angle iron 35x35x5 mm), length: 460 mm x 2 nos ms angle iron 50x50x6 mm), length: 950 mm x 2 nos for bed knee bracing ms angle iron (50x50x6 mm), length: 2800 mm x 2 nos for lt distribution box and go switch assembly ms angle iron (50x50x6 mm), length: 450 mm x 1 nos for lt distribution box and go switch assembly go switch handle supporting: [channel iron (75x40x6 mm), length:460 mm go ab switch unit (11kv, 400a, 25 κα) triple pole o/d type d.o fuse unit boq1 aluminium thimble copper thimble danger plate barbed wire lt cable 3.5 core 70 sq. mm aluminium paint. red oxide energy meter (3-ph, 4-wire) dlms compliant 50/5 a ct type for 25 kva dtr lt switched capacitor 9 kvar for 25 kva dtr erection part of 11 kv ht line erection charges & transportation charges complete in all respect of 11 kv ht line erection part of 25 kva dtr erection charges & transportation charges complete in all respect of 11/0.4 kv, 25 kva dtr jguros

State Government

CTN :45095884

07 Jul, 2026 NA

Tapi - Gujarat

Tender For corrigendum : supply of various consumables items for emd ii unit 3, 4 & 5, utps. (emd - 5 et-6261) - w963 play safe high voltage tape (50 mm x 0.76 mm x 9.1 mtr) roll, 901 easyclean (nf) 500 ml. spray can - on line electrical contact cleaner., kli - nit ct-2 self spraying type in 350ml can packing, grease gun, wd 40 size 340 gms spray bottle manu hardcastle & waud mfg . co . ltd, crimper plier,self adjustable crimping tools used for 0.25-6.00 sqmm cable end sleeves, led torch, rechargeble torch, puf seal self expanding foam for sealing, measure tape 30 meter, pebble ral 7032 color spray bottle for electrical ht / lt panel, impact wrench power/battery operated, platform truck.size:-60 length x 35 width, allen key set black finish of mm series having sizes 1.5mm ,2mm,2.5 mm ,3mm ,4mm ,5mm ,6mm , 8mm , & 10mm allen keys, hand drill machine size 13mm, feeler gauge: 0.05 - 1 mm, length - 150. size: 0.05 - 1mm step of 0.05mm, 20 leaves, filler gauge set of 26 blades, skf make induction heater model no. tih 100m / 230v for bearing fitting work., hydraulic bearing puller kit, make- skf, model no- tmma 75h/set, width of grip external 52-200 mm, effective arm length - 200 mm, withdrawal force- 75 kn, high speed portable blower,550 w (min.),cap-3.8 m3/minute,16000 rpm,1.7 kg., bosch make hot air gun model ghg 630 dce power input: 2000 watts, temprature range: 50-630 degree c, air flow rate: 150/300/5001/min, weight: 0.73kgs, hss drill bit set 3 mm to 12 mm, high abrasion (12000 abrasion cycles) with cut & mechanical hazard safety hand gloves made from 100 micro foam nitrile coated over breathable hppe thinnest cut resistance shell

State Government

CTN :45669228

01 Jul, 2026 NA

Kangra - Himachal Pradesh

Tender For tender for supply of equipment material, design, erection, testing and commissioning for sop to jsv by prov. 11 0.4 kv, 25 kva dtr at village gurer along with ht line in electrical section bharoli under esd hpsebl noi jawalamukhi, ed jawalamukhi - steel tubular poles 9 mtr. long muff for steel tubular pole with concrete filling aaac conductor 7/3.81, 80 sq. mm (includes 3 conductor length and additional 1% sag (sag, jumpering and wastage)) single continuous earth wire (g.i wire 8 swg) 11 kv xlpe armoured cable (size 3x95 sq. mm) x 2 cables x-arm cl 100x50x5mm, length 600 mm knee bracing set 1100 mm (65x65x6 mm) anchoring assembly for ht suspension assembly for ht haet shrinkable straight through jointing kit cable termination kit x-arm cl 100x50x6mm, length 2800 mm x 2 nos for incommer line x-arm cl 75x40x6 mm, length 2800 mm x 4 nos for supporting do fuse unit & go switch go switch handle supporting cl 75x40x5 mm, length 460 mm go ab switch unit (11kv, 400a, 25 ka) tripple pole ofd type do fuse unit cross-arm (channel iron (100x50x6 mm), length 1270 mm danger plate (250x200x1.6 mm) nuts & bolts off sizes discs insulator sets (comprising 1 no. disc: ^^(porcelain, bs, 12 kv, 90 kn) including dead end clamps etc.) safety & maintenance equipment for line maintenance ci 100x50x5 mm length 2340 mm belt al 50x50x6 mm length 1800 mm aluminium paint supply part of 11/0.4 kv 25 kva distribution sub-station steel tubular poles 9 mtr. long muffs with concerete filling distribution transformer 11/0.4 kv, 25 kva x-arm: [channel iron (100x50x6 mm), length: 2800 mm x 2 nos] ms angle iron (50x50x6 mm), length: 2800mm x (1 nos for la's) x-arm: [channel iron (75x40x6 mm), length: 2800mm x 4 nos] for supporting do fuse unit & go switch half clamp (m.s. flat 50x6 mm) full clamp (m.s flat 50x6 mm) nuts and bolts of various sizes (galvanised coated) aluminium thimble copper thimble danger plate barbed wire lt cable 3.5 core 70 sq. mm aluminium paint. red oxide energy meter (3-ph, 4-wire) dlms compliant 50/5 a ct type for 25 kva dtr lt switched capacitor 9 kvar for 25 kva dtr erection part of 11 kv ht line erection charges & transportation charges complete in all respect of 11 kv ht line erection part of 25 kva dtr erection charges & transportation charges complete in all respect of 11/0.4 kv, 25 kva dtr

CTN :45662043

07 Jul, 2026 44.41 Lacs

Sultanpur - Uttar Pradesh

Tender For running contract for deposit works under edd-jaisinghpur, sultanpur. - part-a (material), following materials supplied by the contractor :-, stone pad., earth wire clamp with nut & bolts., clamp for top/t-off/dropper., suspension clamp., dead end clamp., eye hook., eye hook clamp., x-arm holding clamp., red oxide paint., alluminium paint., f-bracket., pg clamp, guarding angle clamp., barbed wire g.i., stay loop insulator/guy insulator., bolts, nuts & washers all sizes., l.t. connector (pearcing)., gi pipe 6" dia, hdpe pipe 120mm., safe carriage/cartage of following items from store centre, sultanpur to work site including loading, unloading and proper stacking (distance within 0-50 km.), safe carriage of stp 09 mtr. long., safe carriage of stp 11 mtr. long., safe carriage of pcc pole 8.5 mtr. long., safe carriage of pcc pole 09 mtr. long., safe carriage of pcc pole 11 mtr. long., safe carriage of acsr weasel conductor/dog conductor., safe carriage of acsr rabbit conductor., safe carriage of 11 kv xlpe cable al. 3x70/3x120/3x185/3x240 sq.mm., safe carriage of lt abc 1 phase/3 phase., safe carriage of meter qubical., safe carriage of ct/pt combinud unit., safe carriage of t/f 10/16/25 kva., safe carriage of t/f 63 kva., safe carriage of t/f 100 kva., safe carriage of t/f 250 kva., safe carriage of t/f 400 kva., safe carriage of other line materials., dragging of stp 09 mtr. long from site to pit point., dragging of stp 11 mtr. from site to pit point., dragging of pcc pole 8.5 mtr. from site to pit point., dragging of pcc pole 09 mtr. from site to pit point., dragging of pcc pole 11 mtr. from site to pit point., fabrication & erection of single pole support on st pole 09 mtr. including digging of pit & fixing of all accessories and clamps including grouting & earthing of pole as per respo norms., fabrication & erection of single pole support on st pole 11 mtr. including digging of pit & fixing of all accessories and clamps including grouting & earthing of pole as per respo norms., fabrication & erection of single pole support on pcc pole 8.5 mtr. including digging of pit & fixing of all accessories and clamps including grouting & earthing of pole as per respo norms., fabrication & erection of double pole support on pcc pole 8.5 mtr. including digging of pit & fixing of all accessories and clamps including grouting & earthing of pole as per respo norms., fabrication & erection of single pole support on pcc pole 09 mtr. including digging of pit & fixing of all accessories and clamps including grouting & earthing of pole as per respo norms., fabrication & erection of double pole support on pcc pole 09 mtr. including digging of pit & fixing of all accessories and clamps including grouting & earthing of pole as per respo norms., fabrication & erection of single pole support on pcc pole 11 mtr. including digging of pit & fixing of all accessories and clamps including grouting & earthing of pole as per respo norms., fabrication & erection of double pole support on pcc pole 11 mtr. including digging of pit & fixing of all accessories and clamps including grouting & earthing of pole as per respo norms., stay complete with concreating as per respo norms., laying stringing & sagging of new acsr weasel conductor/dog conductor including binding jumpering etc as per respo norms., laying stringing & sagging of new acsr rabbit conductor including binding jumpering etc as per respo norms., digging of trench & laying of cable 11 kv xlpe cable 3x70/3x120/3x185/3x240 sq.mm including sands & brick as per respo norms., laying of cable with hdd method using with hdpe pipe (120mm od pn-4 pe 80 grade uv stabilized hdpe pipe as per is: 4984 of 6 metre) 11 kv xlpe cable 3x70/3x120/3x185/3x240 sq.mm as per respo norms., hanging hosting & clamping and g.i. pipe channel nut & bolts 3x70/3x120/3x185/3x240 sq.mm xlpe 11 kv cable (cost

CTN :45662051

07 Jul, 2026 28.30 Lacs

Sultanpur - Uttar Pradesh

Tender For running contract for deposit works under edd-baldirai, sultanpur. - part-a (material), following materials supplied by the contractor :-, stone pad., lt clamp with nut & bolts., earth wire clamp with nut & bolts., clamp for top/t-off/dropper., suspension clamp., dead end clamp., eye hook., eye hook clamp., x-arm holding clamp., red oxide paint., alluminium paint., f-bracket., pg clamp, guarding angle clamp., barbed wire g.i., stay loop insulator/guy insulator., bolts, nuts & washers all sizes., l.t. connector (pearcing)., gi pipe 6" dia, hdpe pipe 120mm., safe carriage/cartage of following items from store centre, sultanpur to work site including loading, unloading and proper stacking (distance within 0-50 km.), safe carriage of stp 09 mtr. long., safe carriage of stp 11 mtr. long., safe carriage of pcc pole 8.5 mtr. long., safe carriage of pcc pole 09 mtr. long., safe carriage of pcc pole 11 mtr. long., safe carriage of acsr weasel conductor/dog conductor., safe carriage of acsr rabbit conductor., safe carriage of 11 kv xlpe cable al. 3x70/3x120/3x185/3x240 sq.mm., safe carriage of lt abc 1 phase/3 phase., safe carriage of meter qubical., safe carriage of ct/pt combinud unit., safe carriage of t/f 10/16/25 kva., safe carriage of t/f 63 kva., safe carriage of t/f 100 kva., safe carriage of t/f 250 kva., safe carriage of t/f 400 kva., safe carriage of other line materials., dragging of stp 09 mtr. long from site to pit point., dragging of stp 11 mtr. from site to pit point., dragging of pcc pole 8.5 mtr. from site to pit point., dragging of pcc pole 09 mtr. from site to pit point., dragging of pcc pole 11 mtr. from site to pit point., fabrication & erection of single pole support on st pole 09 mtr. including digging of pit & fixing of all accessories and clamps including grouting & earthing of pole as per respo norms., fabrication & erection of single pole support on st pole 11 mtr. including digging of pit & fixing of all accessories and clamps including grouting & earthing of pole as per respo norms., fabrication & erection of single pole support on pcc pole 8.5 mtr. including digging of pit & fixing of all accessories and clamps including grouting & earthing of pole as per respo norms., fabrication & erection of double pole support on pcc pole 8.5 mtr. including digging of pit & fixing of all accessories and clamps including grouting & earthing of pole as per respo norms., fabrication & erection of single pole support on pcc pole 09 mtr. including digging of pit & fixing of all accessories and clamps including grouting & earthing of pole as per respo norms., fabrication & erection of double pole support on pcc pole 09 mtr. including digging of pit & fixing of all accessories and clamps including grouting & earthing of pole as per respo norms., fabrication & erection of single pole support on pcc pole 11 mtr. including digging of pit & fixing of all accessories and clamps including grouting & earthing of pole as per respo norms., fabrication & erection of double pole support on pcc pole 11 mtr. including digging of pit & fixing of all accessories and clamps including grouting & earthing of pole as per respo norms., stay complete with concreating as per respo norms., laying stringing & sagging of new acsr weasel conductor/dog conductor including binding jumpering etc as per respo norms., laying stringing & sagging of new acsr rabbit conductor including binding jumpering etc as per respo norms., digging of trench & laying of cable 11 kv xlpe cable 3x70/3x120/3x185/3x240 sq.mm including sands & brick as per respo norms., laying of cable with hdd method using with hdpe pipe (120mm od pn-4 pe 80 grade uv stabilized hdpe pipe as per is: 4984 of 6 metre) 11 kv xlpe cable 3x70/3x120/3x185/3x240 sq.mm as per respo norms., hanging hosting & clamping and g.i. pipe channel nut & bolts 3x70/3x120/3x185/3x240

Ammeter Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

State Government

corporations/Associations/Others

State Government

State Government

State Government