Latest ammonia liquid Tenders | Government ammonia liquid Tenders

State Government

CTN :45440899

15 Jun, 2026 10.59 Lacs

Rajkot - Gujarat

Tender For second attemptchhaparwadi-ii irrigation schemesupplying oil & grease, diesel & labour charges for applying oil & grease for servicing & cleaning to spillway gate & hr gates & its components & providing skilled, unskilled man power, electrician & gate operator at chhaparwadi-ii dam site for monsoon 2026

State Government

CTN :45447778

08 Jun, 2026 NA

Fatehabad - Haryana

Tender For quotation for glain dori, nut and bolt, grease, pvc pipe, cid joints, cid joints

Central Government/Public Sector

CTN :45458999

19 Jun, 2026 NA

Salem - Tamil Nadu

Tender For auction sale of others - condemned and unserviceable 210 ltr capacity empty barrels with or without lid/ locking arrangements & sediments on as is where is condition, 1] diesel barrels - 35 nos, grease barrels - 18 nos, tar barrels - 4 nos, s.1539 no. 69280-25-00006a dated 09.05.2026. qty- 57 nos, 2] diesel barrels -5 nos, grease barrels - 5 nos, s.1539 no. 69280-25-00007a dated 19.05.2026. qty- 10 nos. total qty- 67 nos. note- please refer to the special conditions before bidding.

State Government

CTN :45442809

15 Jun, 2026 2.53 Lacs

Anuppur - Madhya Pradesh

Tender For procurement of special lubricanting grease for ht/lt motors for emd - 210 mw unit no # 5, atps, mppgcl, chachai.

State Government

CTN :45442807

11 Jun, 2026 84.87 Lacs

Umaria - Madhya Pradesh

Tender For procurement of spares of sam make lp water model annual repair 150 510 sl no 11611 to 11614 and recycle pump annual repair 150 510 sl no 11702 installed at ahp of unit no. 3 and 4, sgtps, mppgcl, birsinghpur - bearing housing, end cover, base & top cover, lantern restrictor, impeller with nut and bolts, outer casing, shaft with keys, volute (inner casing), wear plate (b.side) with insert, wear plate (s.side) with insert, shaft sleeve, split gland [1 no = 2 halves], expeller housing, expeller, dome nut (1 set=08 nos.) & t-bolt (1 set=06 nos.), suction cover, key (shaft sleeve / expeller), key (coupling), laybrinth (pump end), laybrinth (drive end), flange suction cover, grease retainer, piston ring set (1 set = 4 nos), lock nut, bracket side cover, coupling (dia 280 mm), fastener set, suction flange gasket (rubber gasket), .

Central Government/Public Sector

CTN :45449317

16 Jun, 2026 NA

Uttara Kannada - Karnataka

Tender For supply of urinal screen mats , mosquito repellent machine with liquid , rat sticking gel , paint brush 4 inch , paint brush 2 inch , napthalene balls , plastic mug , distilled water , deodriser refill for ships head 8cm into 3cm , paint brush 6 inch , brown sheets laminated , tape transparent 1 inch , xerox paper size 210 into 297mm a4 80 gsm , toilet paper , paint roller 7 inch 177 8 mm cw artificial fur and handle , paint roller 4 inch , paint roller 9 inch , paint roller 12 inch , torch cell 1 point 5 v std , candle wax , paint rfu finishing exterior synthetic dark grey , paint black enamel , paint aluminum heat resistant , jerry can 20 ltrs , battery dry 1 point 5 v size small pencil cell r6 battery dry 1 point 5 v size small pencil cell r6 , wonder tape 2 inch , tape transparent 2 inch , biodegradable garbage bags or gash bags , paint brush half inch 13 mm , paint brush 1 inch , detergent powder , dust bin , rubber gloves , oil and grease remover , gloves leather a , funnel 5 inch

Central Government/Public Sector

CTN :45450544

09 Jun, 2026 1.88 Lacs

Sonipat - Haryana

Tender For enquiry for procurement of engine oil grease and coolant for lng trucks at mmlp barhi

Central Government/Public Sector

CTN :45446551

19 Jun, 2026 82.5 Thousand

Dhanbad - Jharkhand

Tender For rep. of tilt cylinder eye hole, broken bolts removal, fitment, chassis rep., 01 no. broken grease shaft idler yoke, trunnion, k-arm broken bolts removal of d355 dozer sl. no. g11389 at bansdeopur ocp, sijua area - rep. of tilt cylinder eye hole, broken bolts removal, fitment, chassis rep., 01 no. broken grease shaft idler yoke, trunnion, k-arm broken bolts removal of d355 dozer sl. no. g11389 at bansdeopur ocp, sijua area. contract no: bccl/sa/excv/etender/26-27/15 date- 05.06.2026

State Government

CTN :45443626

11 Jun, 2026 2.00 Lacs

Multi City - Telangana

Tender For 3rd call - procurement, supply of tools and equipments for lascars and helpers pertaining to irrigation sub division no.4, pdpl, id4 manthani of ic-pdpl, peddapally district--1 procurement, supply of tools and equipments for lascars and helpers pertaining to irrigation sub div least quotation 1.00 each 39000.00 39000.00supply of 2hp 4 stroke grass cutter/brush cutter umk 450 t (make: honda) (with 1 year warranty for bore & piston) as directed by the engineer-in-charge2 procurement, supply of tools and equipments for lascars and helpers pertaining to irrigation sub div least quotation 1.00 each 15800.00 15800.00supply of chain saw 22" petrol (make: forte ) (with 6 months warranty for bore & piston) as directed by the engineer-in-charge.3 procurement, supply of tools and equipments for lascars and helpers pertaining to irrigation sub div least quotation 1.00 each 6000.00 6000.00supply of grease gun 5 kgs (make:capson) as directed by the engineer-in-charge.4 procurement, supply of tools and equipments for lascars and helpers pertaining to irrigation sub div least quotation 1.00 each 2650.00 2650.00supply of tool kit spanner set ring spanner 6-32 (make: taparia) as directed by the engineer-in-charge.5 procurement, supply of tools and equipments for lascars and helpers pertaining to irrigation sub div least quotation 7.00 each 980.00 6860.00supply of gum boot safety steel toe double colour(make: big elephant) as directed by the engineer-in-charge.6 procurement, supply of tools and equipments for lascars and helpers pertaining to irrigation sub div elec-10.1.33, electrical items sl no.1857 7.00 pair 1136.00 7952.00supply of hand gloves electric shock proof as directed by the engineer-in-charge.( for 11 kv including 13.615% contractor profit).7 procurement, supply of tools and equipments for lascars and helpers pertaining to irrigation sub div least quotation 7.00 each 750.00 5250.00supply of safety helmet isi(make:karam) as directed by the engineer-in-charge.8 procurement, supply of tools and equipments for lascars and helpers pertaining to irrigation sub div least quotation 7.00 each 2000.00 14000.00supply of rain coats (make:zeel) as directed by the engineer-in-charge.9 procurement, supply of tools and equipments for lascars and helpers pertaining to irrigation sub div least quotation 7.00 each 500.00 3500.00supply of measuring tape 30m isi(make: freemans) as directed by the engineer-in-charge.10 procurement, supply of tools and equipments for lascars and helpers pertaining to irrigation sub div least quotation 7.00 each 160.00 1120.00supply of platic big gamela (make:srp gold/pooja) as directed by the engineer-in-charge.11 procurement, supply of tools and equipments for lascars and helpers pertaining to irrigation sub div least quotation 7.00 each 150.00 1050.00supply of sickles/ kodavali (make:tata) as directed by the engineer-in-charge.12 procurement, supply of tools and equipments for lascars and helpers pertaining to irrigation sub div least quotation 7.00 each 1550.00 10850.00supply of crow bar (make;tata) 25 mm as directed by the engineer-in-charge.13 procurement, supply of tools and equipments for lascars and helpers pertaining to irrigation sub div least quotation 7.00 each 750.00 5250.00supply of axe with wooden handle (make: tata) 1400 grams weight (min supply of 1 box i.e. 12 pieces, no loose) as directed by the engineer-in-charge.14 procurement, supply of tools and equipments for lascars and helpers pertaining to irrigation sub div least quotation 7.00 each 535.00 3745.00supply of shovel (make: tata) 10 number 1.8 kg as directed by the engineer-in-charge.15 procurement, supply of tools and equipments for lascars and helpers pertaining to irrigation sub div least quotation 7.00 each 1250.00 8750.00supply of hammers( make:tata) 2 lb weight as directed by the engineer-in-charge.16 procurement, supply of tools and equipments for lascars and helpers pertaining to irrigation sub div least quotation 70.00 kg 75.00 52

CTN :45430790

18 Jun, 2026 NA

Ariyalur - Tamil Nadu

Tender For supply of mechanical engineering lab materials - mechanical engineering lab materials, serve motor drive kitinterface l293d motor driver ic with arduino to control direction of rotation of two dc motors), bldc motor kitbldc motor 1 nobldc motor drive -1noinbuilt volt and ammeter and rpm meterinbuilt power supplyinput 230v ac, lvdt trainer kit complete educational trainer for linear variable differential transformer (lvdt) displacement measurement. built-in ac excitation source and signal conditioning circuitry for lvdt operation. micrometer assembly for precise linear movement of the lvdt core. displacement range ~10 mm with clear front-panel adjustments for zero & calibration. digital display (typically 3 -digit) for direct readout of conditioned output/displacement values. test points and banana sockets for signal observation on external instruments. self-contained unit in a durable enclosure with labeled controls and educational layout. includes user manual and patch cords for experiments. operates on 230 v ac, 50 hz mains supply., multi-cylinder petrolphase : single phase load: mechanical load with ropenumber of cylinders : 4displacement : rope brakepower : 65hp,4000 rpm,1396 ccbrand material : mild steelengine type : 4 stroke self startfrequency : 15hzfuel consumption : petrolfuel tank capacity : 5 letermorh s test rig, tail stock assemblyheavy-duty lathe tailstock assembly for training; cast iron body with base, barrel (quill) ~50 75 mm stroke, hand wheel feed, dead centre mt2/mt3, set over screws for taper turning, spindle clamp, complete with all internal parts for dismantling and reassembly; suitable for 300 400 mm centre height training lathe., dc motorvoltage 220-440 v dcpower - 180 w speed - 200 rpm, hydraulic cylinderdouble acting hydraulic cylinder, bore 40 50 mm, stroke 200 300 mm, working pressure up to 100 160 bar, steel tube with honed bore, hard chromed piston rod, front & rear end caps, piston with seals and wear rings. supplied as standalone unit with suitable mounting for dismantling, inspection and reassembly., hydraulic opreated directional control valve (dcv)manually operated 3/2 or 4/2 way spool type hydraulic directional control valve, nominal size ng06 (cetop 3) or equivalent, rated pressure 210 bar, flow 20 40 lpm; valve body with hardened and ground spool, centering springs, ports p a b t clearly marked. supplied on small mounting plate for dismantling, inspection and assembly practice., bearing with shaft assemblyteaching unit with shaft 25 35 mm dia mounted in housing with deep groove ball bearings (6205 / 6206 class) at both ends; includes locking arrangements (circlips, lock nuts, covers). designed for repeated removal, cleaning, lubrication and refitting of bearings, with provision to mount on bench or test rig., coupling unit using driving and driven shaft plumber block bearing unit1. the plummer block housingmaterial: cast iron (grade fg 200 or equivalent). type: sng or snl series (split-type housing).sealing: felt seals or v-ring seals (to demonstrate lubrication retention).lubrication: provided with a grease nipple at the top center for manual lubrication practice.2. the bearingtype: self-aligning ball bearing (1200 series) or spherical roller bearing (22200 series).bore diameter: standard 25mm or 30 mm (ideal for lab scale).mounting: adapter sleeve mounting (h-series) to teach students how to lock a bearing onto a smooth shaft.3. shafting and couplingshaft material: ground carbon steel (en8 or en9) for high surface finish.coupling type: * flexible coupling: to demonstrate the bearings ability to handle slight misalignment.rigid flange coupling: to demonstrate traditional direct connection.driving/driven setup: one shaft connected to a small electric motor (driving) and the other to a brake drum or load (driven)., spring test machine load & displacement sensing load cel * capacity: 0 10 kno accuracy: 1% fs (better if 0.5% fs) displacement sensor * lvdt / digital encodero accur

Ammonia Liquid Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors